Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs & tiles of anythickness & in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and directed. |
| 2 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Demolition Cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Demolition of brickworkbuilt in cement morterincluding work all quoins, aches, pillars, etc complete all as specified and directed. |
| 5 | Demolition of RCC (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing,chajjas, parapet, lintel beam etc and similar suspended work complete all as specified and directed. |
| 6 | M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 7 | M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4 complete all as specified and directed. |
| 8 | Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris out sideMOD Land complete all as specified and directed. |
| 9 | M&L for 10 mm thick rendering in CM 1:6 onconcrete surfaces / fair faces of brick masonary wall, finishedeven and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for 15 mm thick rendering in CM 1:4 onconcrete surfaces / fair faces of brick masonary wall including mixed with water proofing compound @ 3% by weight of cement, finishedeven and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for new plastered surfaces of wall and applying two coats of oil bound distemper over chalk whiting on plastered surfaces preparotory to distemperingincluding preparation complete all as specified and directed. |
| 12 | M&L for preparation of new plastered surfaces of wall over applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 13 | M&L for raking out joints in floor / wall tiling and pointing with white cement mixed with colour pigment to match complete all as specified and directed. |
| 14 | M&L for Vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 15 | All as per item No 14 here in before but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed.. |
| 16 | M & L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 17 | All as per item No 16 here in before but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 18 | M & L for glazed ceramic colour tiles in vertical surfaces 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 19 | M&L for glazed ceramic coloured tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat of 10mm thick in CM (1:4) complete all as specified and as directed. |
| 20 | M&L for Non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.. |
| 21 | M&L for Non-skidcolouredceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not.exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 22 | All as per item No 21 here in before but on vertical surfaces/skirting/dados etc including backing coat of 10mm thick in CM (1:4) complete all as specified and directed. |
| 23 | M&L for 18 to 20mm thick machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 24 | M&L for 18-20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 25 | M&L 18-20mm thick Granite tiles (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform etc over 15mm thick screed bed and like in cement mortar (1:6)including grinding and polishing complete all as specified and directed. |
| 26 | S&F Dholpur stone 16 to 18mm thick ,cladding gang saw cut with machine cut edges, uniform colour of euch stone size notexceeding 0.25 sqm fixed with and including one number SS clamps (grade-202) of flat 30mm x 2mm, 150mm long made to shape in each slab making V groove at top and bottom of stone and drilling hole for hold fastner polishing rubbing & including silicon treatment complete all as specified and directed. |
| 27 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors incl 15 mm thick screed bed in CM 1:6with grey cement and pigment complete all as specified and as directed. |
| 28 | M&L for60mm Machine pressed precast conctete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 29 | M&L Digital/ Double Charged Polished Vitrified tiles 15 mm thick (square/ rectangular) polished, area of each tiles not less than size 1200mm x2400 mm, in floors etc over 15mm thick CM (1:6) screed bed. set and jointed in neat cement slurry and pointed in white or coloured cement to matchwithtiles adhesiveas per manufactrurer\"s instructions complete all as specified and directed. |
| 30 | M&L Digital / Double Charged Polished Vitrified tiles 15 mm thick (square/ rectangular) polished, area of each tiles not less than size 1200mm x2400 mm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match withtiles adhesive as per manufactrurer\"s instructions including backing coat 10mm thick in cement plaster 1:4 andtile adhesive etc complete all as specified and as directed. |
| 31 | M & L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including joint filling of colour cement and pigment etc as per specification complete all as specified and directed. |
| 32 | M&L for 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as in level course complete all as specified and as directed complete all as specified and directed. |
| 33 | M&L for 50mm thick PCC ( 1:2:4) type B-1,(12.5mm graded aggregate) in sub floors, floors bases and paving finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&L for plain cement concrete (1:4:8) type D-2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 35 | M&L for 75 mm thick plain cement concrete (1:2:4) type B-2 (40mm graded aggregate) in flooring and similar works complete all as specified and directed. |
| 36 | M&L for 75 mm thick PCC ( 1:3:6) type C-2,(20mm graded aggregate) as in plinth protectionincluding joint filling etc complete all as specified and directed. |
| 37 | M&L for 75mm thick Cement concrete type D-21:4:8 (40 mm graded gradedaggregate) as in sub base of floor finishes and pavings and similar works complete all as specified and directed. |
| 38 | M&L for reinforced cement concrete nominal mix in type B-1 (1:2:4) (20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels and similar works complete all as specified and directed. |
| 39 | M&L for reinforced cement concrete nominal mix in type B-1 (1:2:4) (20 mm graded aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and cover slab and the like complete all as specified and directed. |
| 40 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 41 | All as per item No 40 here in before but 6mm to 8mm dia complete all as specified and directed. |
| 42 | Dismantling and Taking down existing water proofing treatement with base of cement concrete of any description and any thicknessand removing debris (dismantled materials) outside MD land and cleaning properly the site etc complete all as specified and directed. |
| 43 | M&L for 40 mm thick plain cement concrete (1:2:4) type C-0 (using 12.5mm graded stone aggregate) as in padding complete all as specified and directed. |
| 44 | M&L for rendering in CM (1:4) 10mm thick over RCC roof / brick wallmixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed. |
| 45 | Liquid water proofing compound all as specified and directed. |
| 46 | M&L for preparing clean and dried plaster surface and applying a coat of oil based bitumen primer confirming to IS No. 3384 - 1986 @ 0.30 litrs/ Sqm and then laying APP polymer modified mebrance 3mm thick with non woven polyester reinforcement membrane (3.50 Kg/Sqm) having thermal insulation withmineral gravel finish on uppar side of membraneand laid byby torch application method to the entire surface all as specified and directed. |
| 47 | M&L for cement concrete type 1:2:4,Type B0 using 12.5mm stone aggregate as in filling work and like complete all as specified and directed. |
| 48 | M&L Cutting groves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 49 | M&L for ATT Along the internal and external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes minimum 300mm depth @ 300mm c/c etc in apron complete all as specified and as directed. |
| 50 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each complete all as specified and directed. |
| 51 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed. |
| 52 | Taking down shutters of any description exc 1sq. mbut n exc 2.00 sqm each complete all as specified and directed. |
| 53 | Taking down aluminium chowkats with shutters ofany size/description including glass panes, rubber packing, snap beading, particle/partition board etc, complete all as specified & directed. |
| 54 | S&F in pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packedwithPCC 1:3:6,back side all around frame completeall as specified and directed. |
| 55 | S&F in pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packedwithPCC 1:3:6,back side all around frame complete all as specified and directed. |
| 56 | S&F in 35mm thick factory made plain framed, panelledshutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 57 | S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge. |
| 58 | S&F in 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, but divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 59 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed. |
| 60 | S&F in Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 61 | S&F in Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core etc supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 62 | S&F in 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 63 | S&F in 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed completeall as specified and directed. |
| 64 | S&F in 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21,complete all as specified and directed. |
| 65 | S&F inaluminium extruded alloy handles fabricated type anodised of size 150mm completeall as specified and directed. |
| 66 | S&F inaluminium anodised barrel tower bolt of size 200mm long extruded section completeall as specified and directed. |
| 67 | S&F in 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate completeall as specified and directed. |
| 68 | S&F in repairs 300 mmsize mild steel ordinary rat tail, rod pattern springs including roller and roller plate completeall as specified and directed. |
| 69 | S&F in 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring completeall as specified and directed. |
| 70 | S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections completeall as specified and directed. |
| 71 | S&F in stainless steel wire cloth 0.50mm nominal dia of wire and average width of apertujre 1.18m fixed with MS screw and bolts completeall as specified and directed. |
| 72 | S&F in repairs stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts all as specified and as directed. |
| 73 | S&F in repairs aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts in repairs all as specified and as directed. |
| 74 | S&F in repairs aluminium anodised barrel tower bolts of extruded section of length 100 mm,completeall as specified and directed. |
| 75 | All as per item 73 here-in-before but length of tower bolt 150 mm completeall as specified and directed. |
| 76 | All as per item 73 here-in-before but length of tower bolt 200 mm completeall as specified and directed. |
| 77 | S&Fin repairs 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections completeall as specified and directed. |
| 78 | S&F in repairs hasp and staple safety type of size 100 mm of aluminium anodized complete all as specified and directed. |
| 79 | S&F in repairs aluminium extruded alloy handles fabricated type anodised of size 150 mm completeall as specified and directed. |
| 80 | S&F in repairs mild steel chromium plated fancy type handle 125 mm size for built in steel/Wooden cupboard complete all as specified and directed. |
| 81 | S&F in repairs stainless steel fancy type handles ofsize 120 mm complete all as specified and directed. |
| 82 | S&F in repairs 150mm brass handles, fabricated type and polished complete all as specified and directed. |
| 83 | S&F in repairs 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 84 | S&F in repairs 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as as specified and directed. |
| 85 | M&L for fixed in repairs 6 mm thick plywood as in cover for cooler, air conditioner or simillar works etc fixed at window incl necessary cutting and waste complete all as specified and directed. |
| 86 | M&L for fixed in repairs 12 mm thick plywood incl necessary cutting and waste complete all as specified and directed. |
| 87 | M&L for fixed in repairs 18 mm thick plywood incl necessary cutting and waste complete all as specified and directed. |
| 88 | M&L for fixed in repairs12 mm thick Particle board, medium density , flat pressed single line layer type or three layer type with BWR type adhesive fixed with screw to timber frame work complete all as specified and directed. |
| 89 | M&L for fixed in repairs 18/19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , or aluminum frame work , complete all as specified and as directed. |
| 90 | Extra over rates for external teak wood lipping 6 mm thick ,width 18 to 20 mm fixed with nails complete all as specified and directed. |
| 91 | M & L in repairs 2nd class hardwood forplain fillets ,square ,rectangular or triangular in sectional areaexc.6 Sqcm& n. exc 13 Sq cm clean swan,secured with nails or brads incl staining and Varnishing incl necessary nails / screws etc complete all as specified and directed. |
| 92 | S&F in repairs door seal aluminium plate with nylon brush ivory matt having width 6cm colour ivory, matt finishing, material metal with brush incl screw for fixing etc complete. |
| 93 | S&F in repairsHealth faucets, hand shower stand / hook only brass cromium platedincluding screw for fixing on wall etc complete all as specified and directed. |
| 94 | S&F in repairs 6 mm thick rectangularglass self with aluminum / SS railingincl bracketsfor fixing ( size 450mm x 150 mm )etc complete all as specified and directed. |
| 95 | S&F in repairs 10 mm thick glass in shelf size exc 0.5 Sqmandnot exc 2 Sqm of selected quality glass, mounted on wallwithchromium plated brass screws incl brackets / SS studds incl taking down old glass shelf all as specified and as directed. |
| 96 | S&F in repairs aluminium anodised 20 mm dia tubular towel rail \"D\" type 600 mm long complete all as specified and directed. |
| 97 | S&F in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring including taking down old stopper from door complete all as specified and directed. |
| 98 | S&F in repairs 100 mm size mortice lock of aluminium, vertical type,4 levers, complete all as specified and directed. |
| 99 | S&F in repairs looking mirror size 600 mm x 450 mmof selected quality glass,5.5 mm thick, mounted on 6 mm thick AC building boardcommercial ply with decorative beading all round incl wood with PVC frame fixed with chromium plated brass screws complete all as specified and directed. |
| 100 | S&F in repairs 20 mm dia decorative aluminium anodised powder coated tubular curtain rod including brackets, knobs, end stops fixing with screw/ nails etc complete all as specified and directed. |
| 101 | S&F in repairs aluminium anodised brackets powder coated to match with existing 20mm dia curtain rod fixing with screw/nails etc complete all as specified and directed. |
| 102 | S&F in repairs25 mm dia stainless steel curtain rod with brackets including both side decoative end knobs fixing with screw/ nails/ plugs etc complete all as specified and directed. |
| 103 | S&F in repairs curtain with blade (vertical blinds),or roller blind , havingroller , threads / Chain & pully system (clutching mechanism)etc complete complete all as specified and as directed. |
| 104 | Repairs only curtain with blade (vertical blinds),or roller blind , havingroller , threads / Chain & pully system (clutching mechanism)etc complete complete all as specified and as directed. |
| 105 | S&F in repairs telescope channel 460mm Long 1st quality fancy type suitable for sliding racks of inbuilt cuboards etc all as specified and directed. |
| 106 | S&F in repairs stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame completeall as specified and directed. |
| 107 | S&F in repairs 5.5 mm thick glass,looking mirror size exc 0.5 Sqmandnot exc 3 sqm of selected quality glass,with chromium plated brass screws/ brackets/ SS studs in top and bottom (any No) etc complete all as specified and directed. |
| 108 | S&F in repairs brass mortice lock vertical type 6 lever of size 100 mm to 120 mm long with handle complete all as specified and as directed. |
| 109 | M&L in repairs of floor door spring for aluminium door by greasing, oiling and replacement of screwsetc complete all as specified. |
| 110 | S&F in repairs mild steel peg stay 250 mm long for steel window / ventilator complete all as specified and directed. |
| 111 | S&F in repairs peg set of six hooks, aluminium, anodised powder coated fixed complete all as specified and directed. |
| 112 | S&Fin repairs anchor and fastners sizedia 10 mm ,length 150 mm complete all as specified and directed. |
| 113 | S&F in repairsfor fixing angle for brackets should be 40 mm X 40 mm X 6 mm with MS Clamp600 mm to 700 mm long fixed to cabinets ,wooden cupboard wall hung,including anchor and fastners , with two coats ofsynthetic enamel paint to brackets,including making good etc complete all as specified and directed. |
| 114 | S&F in reapirs 25mm*12mm size magnetic catches with plastic body and striking plate including letting in and fixed complete all as specified and directed. |
| 115 | S&F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished completeall as specified and directed. |
| 116 | M&L for preparation of new wooden surfacesof any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer completeall as specified and directed. |
| 117 | M&L forpreparation of new steel and iron surfacesof any descriptionover 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat ofred oxide primer completeall as specified and directed. |
| 118 | S&F in repairs double action floor spring hydraulically regulated made up of minimun 1.25 mm thick aluminium alloy sheet foundatin box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with including taking down of door and refixing the same complete all as specified and directed. |
| 119 | S&F in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) complete all as specified and directed. |
| 120 | Repair and fixing of notice board, photo frame, and similar work of any description or size , required carpenterwork and carry out using petty materials such as nails, screws, struds etc complete all as specified and directed. Note: Any items required to be replaced shall be paid under respective items. |
| 121 | Re-securing or easing and adjusting door without taking down shutters exc 1.00 sq.mand n exc 2.00 sqm each of any description complete all as specified and directed. |
| 122 | Re-securing or easing and adjusting door without taking down shutters exc 2.00 sqm each of any description complete all as specified and directed. |
| 123 | Repairs of loose wooden doors by replacing unserviceable existing hinges, fittings & adjustmentfor smooth functioning as required (built in steel cupboard)complete all as specified and as directed. |
| 124 | Repair to aluminium door, windows and ventilator including taking down, refixing in same opening after changing glass panes/aluminium sections as required. (Note : aluminium sections/glass pane shall be measured and paid seperately under respective items) |
| 125 | M&L aluminium powder coated (minimum thickness of powder coating 50 micron) sections suitable for doors frame , window and ventilator complete all as specified and directed. |
| 126 | Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed. |
| 127 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden leppingin square not exc 0.50 Sqm each in each pane complete all as specified and directed. |
| 128 | All as per item 132 here-in-before but with 3 mm thick figured glass complete all as specified and directed. |
| 129 | S&F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame workcomplete all as specified and as directed. |
| 130 | S&F in repairs 5.5 mm thick tinted glass in black colour , exc 0.5 Sqm andnot exc 2 Sqm of selected quality glass,complete all as specified and directed. |
| 131 | S&F in repairs 12mm thick toughened glass,in partition , in fixed partition wall with SS studds, gaskets and necessary hardware or in any automatic doors, sliding door and similar work incl cutting to shape, drilling holes and aluminium section / machine of selected quality glass, including frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded all as specified and directed. |
| 132 | S&F in repairs 12 mm thickfrosted glass, toughened door frameshutters fixed to wall/floor with suitable stainless steel pivot, stainless steel 450 mm long \"H\" Types glass door handle standard, locking arrangement, pivot, floor springincluding frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded all as specified and directed. |
| 133 | S&F in repair wall mounted LED iluminated mirror comprising 4-6mm thick high quality moisture resistant mirror with polished edges. The Mirror shall be provided with built inenergy efficient LED strip lighting cool light warm light and neutral white as specified with diffused illumination complete all as specified and directed. |
| 134 | M&L 15mm thick homogenous clay tiles in repairs (Elevation Tiles) of size 23x75mm laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of tile complete all as specified and directed |
| 135 | Welding in repairs to steel gates, wicket gates, railings, windows , doors, cupboards etc n. exc 2.5 cm in length and thickness of metal to be weldedexc 6 mm but n exc 9mm or similar works, complete all as specified and as directed. |
| 136 | Welding in repairs to steel gates, wicket gates, railings, windows , doors, cupboards etc exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 6 mm but n exc 9mm or similar works, complete all as specified and as directed. |
| 137 | M&L in repairs for anodised aluminium snap grid frame work of size (605mm X 605mm ) using T grid/Cross-T/Wall angle/level clip & suspenders for false ceiling and similar works including hangers 6mm dia. G.I. wire (upto 1200 mm length) size of grid (605 mm X 605 mm ) adjusting level fixed to roof slabs/trussesby means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60 mm long and expansion hold fastener 12.5mm dia 40mm long including taking down complete all as specified and directed. |
| 138 | S & F false ceiling tiles of size 595mm x 595 mm, 8 to 10mm thick fixed to aluminium snap grid frame complete all as specified and as directed by Engineer-in-Charge. |
| 139 | S & F in repair false ceiling tiles of size 595mm x 595 mm, 8 to 10mm thick fixed to aluminium snap grid frame complete all as specified and as directed by Engineer-in-Charge. |
| 140 | S&F in repairs Fully perforated 12mm thick micro regular edged or 10 mm thick square edged G.R.G. (Glassfibre Reinforced Gypsum) False ceiling tiles ofsize of 595mm x 595mm of approved texture, design and Pattenhaving moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476(part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. All accessories should be fixed as per manufacturer\"s instructions. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge |
| 141 | M&L for aluminium powder coating (powder coated of required colour) three track sliding windows frame top and sides of size 92x31.75x1.5mm (section No 20831), bottom size 92x31.75x1.5mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm (section No 20737) with rubber gasket beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperature and fixed with stainless steel wire staples and fixing 5mm thick glass (plain/tinted/with laminated film) with necessary rubber beading gasket etc complete all as specified and as directed. |
| 142 | M&L Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Glass will be measured separately under respective item) |
| 143 | S&F in repairs stainless steel plate rack , 0.5mmto 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc complete all as specified and as directed. |
| 144 | S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed. |
| 145 | S&Fin reparsinks made of stainless steel 1mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,complete all as specified and directed. |
| 146 | S&F in repairs S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,double bowl overall size 1270 mm x 510 mm ( single bowl size 560mm x 410mm x 200mm )complete all as specified and as directed. |
| 147 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement are as follows:- Top horizontal 50 mm SS Pipe 01 No ,20 mm SS Pipe 03 No\"s, 40 mm vertical SS round Pipe for pole 90 CM height complete all as specified and directed. |
| 148 | Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed. |
| 149 | S&F in Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 150 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts, coach screw and washer in roof in roof, wall etc complete all as specified and directed. |
| 151 | S & F pre painted galvalume aluminum Zinc coating GI based plain steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in ridge ,gutters etc fixed with self tapping screws as specified. |
| 152 | S & F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with coach screw and washer in roof ,wall etc all as specified and directed. |
| 153 | M & L marble work 18 to 20mm thick (table rubbed and polished) of any shade in steps, jambs, pillars, window cills, cooking platforms and over 15mm thick cement screed bed in CM 1:6 laid and jointed like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified. |
| 154 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 155 | S&F in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 156 | S&F in steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 157 | S&F in repair 1.00 mm thick steel rolling shutters,with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type complete all as specified and directed. |
| 158 | S&F in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 159 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 160 | S&F Stone / Marble glossy finish for Aluminium composite panel (ACP) sheet 4 mm thick size (max 3600mm x 1200 mmx 4mm ) of selected quality cladding with silicon and 3M tape, fixed to wooden, concrete, brick, angle frame including aluminium grid frame of size 25x50x2mm thick horizontal and vertical frame c/c 450 mm in wall/ ceiling / column surfaces with necessary cleaning of surface and making surface even and smooth including scaffolding complete all as specified and as directed. |
| 161 | S&F 18 mm thick PVC Sheet one side prelaminatedapproved texture (Celuca ply ,Rajashree or equivalent in sintex as approved by GE) as in cabinet with shelves and partitions including Magnetic catches, Mild steel chromium plated handle 125 mm size, Brass cabinet lock, Heavy duty auto lock hinges ofstainless steel of grade SS-304, required beading and necessary fittings and fixtures as per manufacturers instruction complete as in repairs allas specified and as directed |
| 162 | S & F continous (Piano) type hinges stainless steel bright finish or electro galvanised with wide of flaps30mm complete all as spd and directed. |
| 163 | M&L two coats of french polishing on old wooden surfaces of any description, width or girth including cleaning and preparation of surfaces including a coat of wood filler complete all as specified and directed. |
| 164 | M & L 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed by Engineer-in-charge. |
| 165 | M & L acrylic sheet having area not exc 0.5 Sqm with standard size letter (no. of letter per sheet 3 to 6 nos) as approved pattern complete all as specified and directed by Engineer-in-charge. |
| 166 | Taking down eaves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 167 | Supply&fixing75mmborePVC(SWR)pipessinglesocketed(pressureratingnotlessthan 4kg/sqcm)inanylengthwithrubberringjointsfordrainorrainwaterfixedalongwallswithand including PVC clamps, complete all as specified and as directed by Engineer-in- charge. |
| 168 | Supply&fixing110mmborePVC(SWR)pipessinglesocketed(pressureratingnotlessthan 4kg/sqcm)inanylengthwithrubberringjointsfordrainorrainwaterfixedalongwallswithand including PVC clamps, complete all as specified and as directed by Engineer-in- charge. |
| 169 | Supply&fixing150mmborePVC(SWR)pipessinglesocketed(pressureratingnotlessthan 4kg/sqcm)inanylengthwithrubberringjointsfordrainorrainwaterfixedalongwallswithand including PVC clamps, complete all as specified and as directed by Engineer-in- charge. |
| 170 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor150mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 171 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor110mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 172 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor75mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 173 | S&F in repairs PVC 150mm bore (SWR) coupler complete all as specified and directed. |
| 174 | S&F in repairs PVC 110mm bore (SWR) coupler complete all as specified and directed. |
| 175 | S&F in repairs PVC 75mm bore (SWR) coupler complete all as specified and directed. |
| 176 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 177 | Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 178 | S&F 40mm PVC (SWR) pipes, single socketed in any length with rubber ring joints with adhesive solvent fixed to wall or flooras in urinal/ WHB waste water line and similar works etc complete all as specified and directed. |
| 179 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor 40mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 180 | Supply & fixing 40mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 181 | S&F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe. |
| 182 | Cleaning of PVC tank of capacity exc 250 Ltrs and up to and including 500 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing complete all as specified and directed. |
| 183 | All as per Item No.182 here in before but capacity of tank exceeding 500 Litres and not exceeding 1000 Litres complete all as specified and directed. |
| 184 | All as per Item No.182 here in before but capacity of tank exceeding 1000 Litres and not exceeding 2000 Litres complete all as specified and directed. |
| 185 | All as per Item No.182 here in before but capacity of tank exceeding 2000 Litres and not exceeding 5000 Litres complete all as specified and directed. |
| 186 | Dismantling water tanks exc 250 but n.exc 500 Ltrs capacity complete all as specified and directed. |
| 187 | Dismantling water tanks exc 500 but n.exc 1000 Ltrs capacitycomplete all as specified and directed. |
| 188 | Dismantling water tanks exc 1000 but n.exc 2000 Ltrs capacity complete all as specified and directed. |
| 189 | S&F 500 Ltrs capacity rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoistedand fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet,washout and overflow etc and including fixing only ball valvescomplete all as specified and directed. |
| 190 | S&F 1000 Ltrs capacity rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoistedand fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet,washout and overflow etc and including fixing only ball valvescomplete all as specified and directed. |
| 191 | S&F 2000 Ltrs capacity rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoistedand fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet,washout and overflow etc and including fixing only ball valvescomplete all as specified and directed. |
| 192 | M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 15mm bore iron pipe supplied and fixed in repair complete all as specified and as directed by Engineer-in-charge. |
| 193 | M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed in repair complete all as specified and as directed by Engineer-in-charge. |
| 194 | M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 25mm bore iron pipe supplied and fixed in repair complete all as specified and as directed by Engineer-in-charge. |
| 195 | S&F, in repairs vitreous China squatting pan, orissa pattern of size 580mm x 440mm, white with integral foot rest incl connection to trap & flushing pipe completeall as specified and directed. |
| 196 | S&F in repair vitreous china wash down water closet pan (pedestal pattern ) P or S type (excluding fixing bolts, flushing cistern and flush pipe) completeall as specified and directed. |
| 197 | S&F in repairs 10 litres capacityPVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets all as specified complete all as specified and directed. |
| 198 | S&F in repairs vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces,complete all as specified and as directed. |
| 199 | S&F in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 200 | S&F in repairs 15 mm size bib tap cast copper alloy, chromioum plated with fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed. |
| 201 | S&F in repairs 15 mm size pillar taps, fancy type cast copper alloy chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 202 | S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 203 | S&F in repairs 15 mm size stop valve with long shank (concealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed. |
| 204 | S&F in repairs 15 mm size brass chromium plated shower rose 125 mm dia with swivel joints, fixed in position complete all as specified and as directed. |
| 205 | S&F in repairs soap dish,chromium plated, 100X100mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed. |
| 206 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 207 | S&F in repairs 15 mm size wash hand basin centre hole mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, fixed complete all as specified and directed. |
| 208 | S&F in repairs 15 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed. |
| 209 | S&F in repairs 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and gate valve complete all as specified and directed. |
| 210 | S&F in repairs 15 mm size two way bib cock with single handle and wall flange cast copper alloy, chromioum plated with fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed. (Make :Cat part No F2002163 of CERA) or equivalent. |
| 211 | S&F in repairs 15 mm size pillar cock with swan neckspout and aerator left/right fancy type cast copper alloy chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. (Make :Cat part No F2002104/105 (Left/ Right) of CERA) or equivalent |
| 212 | S&F in repairs 15 mm size angle cock with wall flange cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and directed. (Make :Cat part No QT F2006201/ HT F3001201 of CERA) or equivalent |
| 213 | S&F in repairs 15 mm size sink cock ( wall mounted) with long swivel spout and wall flange with all connected accessories, complete all as specified and directed.(Make :Cat part No F1015251 of CERA) or equivalent |
| 214 | S&F in repairs towel ring with wall flange, (Make:cat part No F5004105 of CERA) or equivalent |
| 215 | S&F in repairs Vitreous china EWC wall mountedsnow white of size 610mmx425mm x710mm with twin flush plastic cistern including soft close seat cover complete all as specified and directed. (Make:Cat part No S1031111 P Trap Cat No B1020105 B1510124 and B1510117 of CURTIS CERA) or equivalent |
| 216 | S&F in repairs Vitreous china urinal, full stall type, white incl sensor of snow whiteof size 360mmx330mmx740mm including complete assesories fixing on wall etc complete all as specified and directed.(Make:Cat Part No S4010101 of CERA) or equivalent |
| 217 | S&F in repairs hand shower with health Faucet ABS body with 1 meter SS braided connection pipe and wall hook complete complete all as specified. ( Make : F8030106AB of CERA) or equivalent |
| 218 | S&F in repairs wall mounted shaving swivel mirror of size 200mm dia double sided mirror with one side convex Mirror , 3mm thick glass , double coat for protection and longevity fixing with screw/ nails complete all as specified anddirected. (Make : Cat part No B3510126 of CERA) or equivalent |
| 219 | S&F in repairs vitreous china wash hand basin oval type over/under counter wash basin 560x470mmx 190mm of Ivory colour complete all as specified and directe.(Make Cat part No S2030104 of CERA) or equivalent |
| 220 | S&F in repairs seat cover fixing with existing EWC with complete acessories etc complete all as specified and directed.(MakeCat part No : CALIBRE B1510104 of CERA) or equivalent |
| 221 | S&F in repairs wall mixer with bend pipe for over head shower with mixing hot & cold water, cast copper alloy, chromium plated with all connected accessories complete all as specified amd directed. (Make : cat part No F2002401 of CERA ) or equivalent |
| 222 | S&F in repairs Ist quality bathroom mirror with cabinetof size 400x500mm ,fixing on wall with brackets/screws/ studs etc, complete all as specified and as directed (Make : Prayag Cat No 554) or equivalent |
| 223 | Repairs & maintenance of slim concealed flushing cisternetc by replacement of internal installation kit& assembly and making it functional with wall mounting frame complete all as specified and as directed.(Make cat part No 2235 BT of CERA) or equivalent |
| 224 | S&F in position glass bricks of approved make of size 195mmX195mmX80mm with white cement (1:1) at all heights, including with necessary PVC/ wooden frame work etc complete all as specified and directed. |
| 225 | M&L for replacement of brass spindle with nylon washer to existing 15 mm size chromium plated bib taps,pillar taps, stop cock or angle valve of any type or description complete all as specified and directed. |
| 226 | M&L for repairs of unserviceableexisting bib taps, pillar taps, stop cock or angle valve of any type or description including replacement of nylon washer,teflon tape etc complete all as specified anddirected. |
| 227 | S&F in repairs 15 mm size SS/ Brass chromium plated zig zag type connector pipe(coupling) for connecting to wall mixer / basin mixerincluding GI tubing etc complete all as specified and directed . |
| 228 | S&F in repairs grating doom of size 150mm x 150 mm stainless steel fixing with white cement/ solvent on floor,complete all as specified and as directed. |
| 229 | S&F in repairs polyethylene water tank cover with hingesand locking arrangements to suitable 500 ltrs to 1000 Ltrs tankscapacity etc,complete all as specified and as directed. |
| 230 | S&F in repairs polyethylene water tank cover with hinges and locking arrangements suitable to 2000 Ltrs tanks capacityetc,complete all as specified and as directed. |
| 231 | S&F in repairs plastic water closet seat cover, with white/ ivory colour closed pattern with flat bottom fixing to existing EWC including necessary arrangements etc,complete all as specified and directed. |
| 232 | S&F in repairs Push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals,(Minimum weight 15mm-50gms) complete all as specified and directed. |
| 233 | S&F in repairs 15 mm size angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms ,complete all as specified and directed. |
| 234 | S&F in repairs 15mm size standard of PTMT long body bib tap of any colour high pressure with long body (Minimum weight 15mm- 120gms) screwed for iron pipe and fixed complete all as specified and directed. |
| 235 | S&F in repair PVC connection 15 mm size with PTMT nuts on both end, length 450 mm,complete all as specified and directed. |
| 236 | S&F in repair PVC connection 15 mm size with PTMT nuts on both end, length 600 mm,complete all as specified and directed. |
| 237 | Supply and fix in repairs 32 mm size waste coupling of PTMTfor wash hand basin / urinal / sink complete all as specified and directed. |
| 238 | Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink complete all as specified and directed. |
| 239 | Taking up or down 15 mm bore steel water tubing including connected fitting, incl cleaning of pipe,connection ,fixture, and disconnection of fitting fixture etc. from tubing complete all as specified and directed. |
| 240 | S&F in repairs 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and directed. |
| 241 | Re-fixing of 15 mm bore galvanized iron tubing medium grade retrieved from item No 194 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors complete all as specified and directed. |
| 242 | Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing complete all as specified and directed. |
| 243 | S&F in repairs 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and directed. |
| 244 | Re-fixing of 20 mm bore galvanized iron tubing medium grade retrieved from item No 197 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floorscomplete all as specified and directed. |
| 245 | Taking up or down 25 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture from tubingcomplete all as specified and directed. |
| 246 | S&F in repairs 25 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floorscomplete all as specified and directed. |
| 247 | Re-fixing of 25 mm bore galvanized iron tubing medium grade retrieved from item No 197 here-in-before, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floorscomplete all as specified and directed. |
| 248 | Repairs & maintenance of sensor of pillar tap / urinal / wash hand basin etc by replacement of internal circuit & assembly and making it functionalcomplete all as specified and directed. |
| 249 | Supply and fix in repairs 32 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed. |
| 250 | Supply and fix in repairs 40 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed. |
| 251 | S&F in repairs toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 252 | S&F in repairs UPVC pipes of 15mm bore including all fittings complete all as specified and directed. |
| 253 | S&F in repairs UPVC pipes of 20mm bore including all fittings complete all as specified and directed. |
| 254 | S&F in repairs UPVC pipes of 25mm bore including all fittings complete all as specified and directed. |
| 255 | Checking and attending to air lock, water leakage from taps, flushing cistern, wash hand basin and other sanitary fitings and fixtures and any obstruction to water supply , requiring plumber work and carry out minor repairs such as replacement of washers , checknuts, tightning of fittings of flushing cistern etc including petty materials like washers of all sizes , thread (shoot) , M seal screw , nails to make water supply , plumbing lines functional and leak proof complete all as specified and as directed. Note: Any items required to be replaced shall be paid under respective items. |
| 256 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 257 | S &F in repairs internal assembly kit for 10 litres capacity PVC valveless symphonic action type flushing cistern or as per existing flush cistern with ball valveall as specified and directed. |
| 258 | S & F in repairs Brass chromium plated 32mmbottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed. |
| 259 | S&F powder coated, any colour, aluminum door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 260 | Providing and fixing 3-5mm thick Italia glass mosaic tiles 300MM*300MM size and chip size 20mmx20mmshould be fix in floor/walls with adhesive based installation over plastered / concrete surface including preparation, grouting and finishing as per design and specifications (colour and pattern as approved by user during execution) |
| 261 | S&F powder coated, any colour, anodised aluminum window and ventilator shutters, (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) complete all as specified and directed. |
| 262 | S & F in repairs aluminium power coated (min thickness of powder coating 50 micron of approved colour ) ventilator ,partially glazed and partially louvers ,outer frame and mullion fabricated with aluminium section of size 82.50mm X 38 mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 4mm thick froasted glass including rubber bedding and glazing clip half portion louvers of 80mm wide and 4mm thick froasted glass including aluminium louver patti including SS wire gauge for fixing of 0.36mm dia and 1.40mm width aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting and fixture and fixed in position complete all as specified and directed. |
| 263 | S & F in sliding lock for aluminium window fixed in repairs including taking down complete all as specified and directed. |
| 264 | S & F solar control film of 50 micron to glass panes n. exc 1.5 sqm as per instructions of manufacturer complete all as specified and directed. |
| 265 | S & F rubber packing for aluminium door and window glass size n. exc 1.50 sqm each pane including taking down and refixing glass from door and windowall as specified and directed. |
| 266 | M & L for sealing gaps between window and wall with silicon sealant of gap n .exc 5mm all around the periphery of window having area n. exc. 2 Sqm complete all as specified and directed. |
| 267 | S & F in repairs health faucet pipe only chromium plated with 8mm dia and 1m long flexible tube complete all as specified and directed. |
| 268 | M&L for preparation of oldsurfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 269 | M&L for preparation of old surfaces of wallsand applying two coat of distemper oil emulsionover putty to level the undulated surface of wallcomplete all as specified and as directed. |
| 270 | M&L for preparation of old surfaces of wall and applying one coat of acrylic exterior emulsion (weather coat) paint using roller brush complete all as specified and as directed by Engr-in-Charge. |
| 271 | M&L for preparation of old surfaces of wallsand applying one coat of plastic emulsion paint including putty work to level the undulated surfaces of wall, complete all as specified and as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
