|
| 1 | Taking down cement plaster on brick or PCC block masonry wall in any description complete all as specifiied and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the rubbies complete all as specifiied and directed. |
| 3 | Taking down existing chowkats or frames n.exc. 1.5 Sqm eachremoving to from storeor handed over to contractor complete all as specifiied and directed. |
| 4 | Taking down existing chowkats or frames exc. 1.5 Sqm but n exc 4.0 Sqm eachremoving to from storeor handed over to contractor complete all as specifiied and directed. |
| 5 | S&F in repair Prelaminated particle board12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including door handle or knob complete all as specifiied and directed. |
| 6 | S&F butt hinges 100mm medium weight colled rolled miled steel complete all as specifiied and directed. |
| 7 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel brass polished, bright finished complete all as specifiied and directed. |
| 8 | S&F 150mm size aluminum handles, cast type anodised complete all as specifiied and directed. |
| 9 | Taking up or down old/chocked water tubings 15mm bore with fittings from trenches /walls and stacking at site all as directed by Engineer-in-Charge. |
| 10 | Taking up or down old/chocked water tubings 20 mm bore with fittings from trenches /walls and stacking at site all as directed by Engineer-in-Charge. |
| 11 | Taking up or down old/chocked water tubings 32 mm bore with fittings from trenches /walls and stacking at site all as directed by Engineer-in-Charge. |
| 12 | Demolition Cement concrete(unreinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specifiied and directed. |
| 13 | M&L 50mm average thickness PCC 1:2:4 type B0 using 12.5mm graded aggregate as in padding and (roof levelling course) on roof surfaces complete all as specified. Note- Water proofing compound to be used @ 3% by weight of cement content for concrete padding work complete all as specifiied and directed. |
| 14 | M&L for rendering in CM (1:3) 10mm thick over RCC roof, chajja/ brick wallmixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement complete all as specifiied and directed. . Note - WPC shall be measured and paid separately. |
| 15 | M & Lin repairsfor roof treatmentwith following specification completely, complete all as specified and as directed by Engineer-in-Charge :-(i)Applying a coat of hot bitumen 85x25 @ 1.2kg per sqm.(ii)Laying 3mm thickness APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally and overlaps to be sealed by torch, membrane shall be taken upto the thickness of slab/front fascia. |
| 16 | S&F in repair rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed. |
| 17 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specifiied and directed. . (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories like Lock etc. Net opening will be measured for payment purpose.) |
| 18 | Supply & Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specifiied and directed. |
| 19 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 20 | Providing and fixing factory made uPVC white color Sliding / fixed typewindow / Ventilator Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 21 | Supply only5.5 mm thick sheet oridinary quality glassand glazing with rubber packing around the glass, in squaresn exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 22 | Supply only5 mm thick sheet figured glassand glazing with rubber packing around the glass, in squaresn exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 23 | M&L for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement complete all as specifiied and directed. |
| 24 | M&L for rendering to ceiling in 5mm thick on fair faces concrete surface in CM (1:3) finished even and smooth without using extra cement complete all as specifiied and directed. |
| 25 | M&L for externalrendering 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair complete all as specifiied and directed. |
| 26 | Supply only water proofing compoundconforming to IS-2645,1975 complete all as specifiied and directed. |
| 27 | M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of newplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge. |
| 28 | All as per Item No: 27 but on ceiling complete all as specifiied and directed. |
| 29 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specifiied and directed. . |
| 30 | M & L for non skid Ceramic tiles Tiles 10mm thick, Coloured, polished, of size exceeding 0.18 Sq.m and not exceeding 0.38Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 31 | All as per item No 30 here in before, but on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting complete all as specifiied and directed. |
| 32 | M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 33 | M&L Coloured Glazed ceramic tiles in vertical surfaces 350X250X7mm / 450X350X 7mm thick as in skirting /dado, set and jointed in cement slurry and pointed in coloured cement to match laid over 10mm thick cement backing coat in CM 1:3 complete all as specified and as directed. |
| 34 | M&L For Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specifiied and directed. |
| 35 | M&L for 75mm thick Cement concrete Type D21:4:8 (40 mm graded gradedaggregate) as in floor finishes and pavings as sub base complete all as specifiied and directed. |
| 36 | M&L for 75mm thick Cement concrete Type D21:2:4 (40 mm graded gradedaggregate) as in floor finishes and pavings as base complete all as specifiied and directed. |
| 37 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 15mm thick cement backing coat in CM 1:4 complete all as specified and as directed . |
| 38 | M & L for 300 x 300 x 10mm thick coloured heavy duty vitrified exterier chequeredtiles as in floor/wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortarin CM 1:6 complete all as specified and as directed. |
| 39 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specifiied and directed. |
| 40 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specifiied and directed. |
| 41 | S & F 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed. |
| 42 | S & F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed. |
| 43 | S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed. |
| 44 | M&L complete removal existing wall surfaceapplying two coats of oil bound distemper over a coat of alkali resistant priming paint including preparation of new plastered surfaces of wall complete all as specified and directed by Engineer - in -Charge. |
| 45 | All as per Item No: 44 here in before but on ceiling complete all as specifiied and directed. |
| 46 | M&L for applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation all as specified and directed |
| 47 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifiied and directed. |
| 48 | S & F MS steel work in tubular /post/trusses/purlin including special shaped washersbase and bed plate cleat nut and bolt etcconfirming to IS 1161- 1979 graded St 240 complete all as specifiied and directed. |
| 49 | S&F Stairs (framed) includingstringers, treades, landing balusters, hand rails etc. including cleats brackets Fe 290 (Gde E-165)etc complete all as specifiied and directed. |
| 50 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specifiied and directed. |
| 51 | M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed by Engineer in Charge. |
| 52 | S&F Expanded metal wire mesh weigth n exc 4 Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specifiied and directed. |
| 53 | Supply & fixing in repair with semi perforated12mmthick micro tegular edged GRG false tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 54 | S&F in repair curtain rod / harrison rails miold steel chromium plated with fixed brackets , stops, rollers etc, 25 mm dia with fixed brackets , stops rollers etccomplete all as specifiied and directed. |
| 55 | Supply and fixing 15 mm outer dia CPVC pipes of pressure rating 10kgf/cm2 fixed complete to walls ,ceiling s or in floorsetc complete all as specifiied and directed. |
| 56 | Supply and fixing 20 mm outer dia CPVC pipes of pressure rating 10kgf/cm2 fixed complete to walls ,ceiling s or in floorsetc complete all as specifiied and directed. |
| 57 | Supplying and laying of CPVC pipes32mmouter dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiied and directed. |
| 58 | Supplying and fixing of CPVCBrass Elbow 16 mm outer dia complete all as specifiied and directed. |
| 59 | Supplying and fixing of CPVCBrass Tee16 mm outer dia complete all as specifiied and directed. |
| 60 | Supplying and fixing of CPVCBrass Tee20mm outer dia complete all as specifiied and directed. |
| 61 | Supplying and fixing of CPVCBrass Elbow(3/4 X ½) 20mm outer dia complete all as specifiied and directed. |
| 62 | Supplying and fixing of CPVCBrass UNION 16 mm outer dia complete all as specifiied and directed. |
| 63 | Supplying and fixing of CPVCBrass UNION 20 mm outer dia complete all as specifiied and directed. |
| 64 | S & F in repairs Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 65 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specifiied and directed. |
| 66 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specifiied and directed. |
| 67 | S&F in repairs15mm CP Bib Taps long body fancy type heavy duty with wall flange complete all as specifiied and directed. |
| 68 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long bodywith swivel joint including fixing to steel pipe or union, complete all as specifiied and directed. |
| 69 | S & F in repairsAngular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specifiied and directed. |
| 70 | S&F in repair Cornerglass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specifiied and directed. |
| 71 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) EWCwhite in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and directed. |
| 72 | S&F in repairs Vitreous China wash down water closet pan (semi pedestal pattern) Anglo Indian Type white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and directed. |
| 73 | S&F in repairs 10 litres capacityPVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specifiied and directed. |
| 74 | S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts, flange and waste pipe end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand,etc complete all as specified and directed. |
| 75 | S&Fin repairs bevelled edge mirror of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed |
| 76 | S&F in repair 20 mmbrass chromium plateds towel rail of 20mm dia and 600mm in length \"D\" shaped between flanges complete all as specifiied and directed. |
| 77 | S&F in repair powder coated aluminum peg set of 4 solid body complete all as specified and directed. |
| 78 | S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecified complete all as manufacturers instruction complete all as specifiied and directed. |
| 79 | S&F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specifiied and directed. |
| 80 | S&F in repair 2mm thick fibre glass reinforced translucent corrugated/plainsheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specifiied and directed. |
| 81 | S&F in repair Aluminium wind ties for roof including all necessary drilling, bolting or rivetting fixed with GI self tapping screws as specified for roof sheeting. |
| 82 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces of any description, over 10 cm width or girth, not otherwise described including preparing new steel surfaces complete all as specified and directed. |
| 83 | M&L in repair precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed. |
| 84 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 85 | M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cementcomplete all as specified and directed. |
| 86 | S&F in repair 15mm Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifiied and directed. |
| 87 | S&F in repair Stainless steel graing of 150mm dia with hole or without hole for wast pipe for trap all as specified and directed by Engineer in Charge |
| 88 | S&F in repair 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specifiied and directed. |
| 89 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including claps and Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof on every Mtr \all as specified and directed by Engineer in Charge |
| 90 | S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specifiied and directed. |
| 91 | S&F in repair 110 mm diaPVC (SWR) junction double,(double T), equal or unequal complete all as specifiied and directed. |
| 92 | S&F in repair 110 mm dia PVC (SWR) vent cowl complete all as specifiied and directed. |
| 93 | Material and labour for applying one coats of synthetic enamel paint on steel surfaces of any description, over 10 cm width or girth, not otherwise described including preparing complete all as specified and directed. |
| 94 | Material and labour for applying one coats of synthetic enamel paint on wooden surfaces of any description, over 10 cm width or girth, not otherwise described including preparing complete all as specified and directed. |
| 95 | S&F in repair door closer hydraulically regulated designation No 3 universal type, aluminium (Die Cast) body suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifiied and directed. |
| 96 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specifiied and directed. . |
| 97 | S&F 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified |
| 98 | Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, socketslight fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and as directed. |
| 99 | M&L forpoint wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable 1100V grade drawn through and incl PVC concelled conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLSH cable 1100V grade as earth continuity wire incl modular sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for the following:-(a) One light point /bell point controlled by one switch complete |
| 100 | (b) One fan point controlled by one switchcomplete all as specified and as directed. |
| 101 | (c) One 3 pin socket out let 5 Amps on the independent board complete all as specified and as directed.. |
| 102 | (d) One 3 Pin socket out let 5 Amps on the same board complete all as specified and as directed. |
| 103 | All as per item No 99 above here in before but with cable of size 2.5 Sq mm PVC insulated on independent boardfor power plug 15 Amps complete all as specified and as directed. |
| 104 | S & F in replacementModular switch one way 6A,1 Module, complete all as specified and directed. |
| 105 | S & F in replacementModular switch one way 16A,1 Module, complete all as specified and directed. |
| 106 | S & F in replacementModular socket 6/10A-2/3 pin combined 2 Module complete all as specified and directed. |
| 107 | S & F in replacement Modular socket 16/15A-2/3 pin combined2 Module complete all as specified and directed. |
| 108 | S & F in replacementModular Fan Regulator, 120W, 2 module complete all as specified and directed. |
| 109 | S & F in replacement Modular Bell push6A 1 module complete all as specified and directed. |
| 110 | S & F in replacementModular bell Buzzer, Ding Dong AC. 230 volts,single pole complete all as specified and directed. |
| 111 | S & F in replacement ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed. |
| 112 | M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 4 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVCConduit with accessories incl 4 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire incl taking down old unsv sub main wiring. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length. |
| 113 | M&L for concealed sub main wiring complete with PVC insulated FRLSH cable of single core 6 Sqmm 1100 volts grade with multi standard copper conductor for drawn through and including conduiting PVCConduit with accessories incl 6 Sqmm unsheathed multi standard FRLSH copper conductor as earth wire incl taking down old unsv sub main wiring. Note: Two runs of cable and one run of conduit & earth wire shall be measured as one run length. |
| 114 | Taking down old unserviceable DBs/MCCBs/MCBs complete all asdirected |
| 115 | S & F in replacementof sheet meal enclosure for VTPN DBs 4 way with addl space to fix the 100 Amps MCCB complete incl taking down old unsv DB all as specified and directed. |
| 116 | S & F in replacement of sheet metal enclosure, single phase, double door SPN DB 8 way, flush to wall mounting for MCB fitted with 200 Amp ratedbus barsand neutral links ( without MCB\"s) SPN/ TPN complete incl taking down old unsv DB all asdirected. |
| 117 | S & F in replacement of MCCB 415 Volts, 16 KA, 4 pole of 100 Amps rated capacity incl taking down old unsv MCCB complete all as specified and directed. |
| 118 | S & F in replacement of 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single pole and neutal and current carrying capacity in the MCB of 40 Ampcomplete with connection testing and commissioning.including taking down old unsv MCB complete all as as specified and directed. |
| 119 | S & F in replacementMCB SP 6 to 32 Amps 10 KA 240 V, 10 KA \"Ç\" Curve incl taking down old usnv MCB complete all as specified and directed. |
| 120 | S & F in replacement ofLED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete incl taking down old unsv light fittingsall as specified and as directed. |
| 121 | S & F in replacement of LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including conencting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 122 | Supply and fixing in replacementLED street light fitting 60 Watt230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.complete all as specified and directed. |
| 123 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 z,Size 300 mm complete incl taking down old unsv Exhast fan all as specified and directed.Note :- (a)Making hole in existing brick/PCC wall of required size to accommodate exhaust fan and fixing louvers on outer surface shall be deemed to be inclusive of quoted rate by the contractor. |
| 124 | Supply & fix ceiling fans complete with blades, down rods as per site requirement ,and accessories, 1 Phase, 230 V, 50 Hz, AC, 1200 mm sweep. Min air delivery 210 CFMwith brushless direct current motor (BLDC, including down rod, Nut,Bolt,Clamp, hold fastener)complete incl taking down old unsv ceiling fan all as specifiedand directed. |
| 125 | Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated incl taking down old unsv one complete all as specified and directed. |
| 126 | M & L in replacementfor single pole and neutral enclosure with a two pin earth plug socket complete with one ssingle pole MCB of 20 Amp capacity incl taking down old unsv one complete all as specified and directed. |
| 127 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core complete incl taking down old unsvall as specified and directed |
| 128 | Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for laying of HT UG Cable in soft/loose soil and getting out complete all as specified and directed. |
| 129 | M & L for Returning, filling in, includingspreading, levelling, wateringand well ramming in layers not exc 25 cm.Complete all as specified and directed. |
| 130 | M & L for Removing excavated materialn exc. 50m and depositing where directed at a level n exc. 1.5 mabove the starting point complete all as specified and directed. |
| 131 | M & L for Sand fillingin trenchesas cable protection including wateringand consolidation complete all as specified and direted. |
| 132 | M&L for brick protection cover to underground cable with sub-class ‘B’ old size over burnt bricks laid dry and flat across the axis of cable, abutting each other with gaps between adjacent bricks not exceeding 10mm complete all as specified & directed. |
| 133 | M & L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6mm thick burried directly in ground not less that 2.25 m deep below normal ground level and top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical palte No 3 connected to earthing test point incl excavation, earth work in any type of soil strata, PCC chamber, 40 mm dia GI med grade pipe as protection of strip and 15 mm dia GI Med grade watering pipe, funnel, wire mesh etcincluding testing on completion all as specified and directed. |
