|
| 1 | B/R PORTION: |
| 2 | Demolition of unreinforced concrete in ground floors and pavings not exceeding15 cm thickness (below or above ground level) and disposed off debries from site complete all as specified. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified. |
| 4 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided forfor complete all as specified. |
| 5 | Dismatling floor, hearth or wall tiling including cement mortar bedding but not backing , removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 6 | Demolition of brickwork or stone / boulder masonry built in cement mortar or cement lime mortar includingall quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exceeding1.5 Sqm but not exceeding4 Sqm each including making good disturbed surfaces complete all as specified. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from frames) not exceeding1.5 Sqmeach including making good disturbed surfaces complete all as specified. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 10 | M&L forglazed ceramic coloured joint free tiles in vertical surfaces of size350 x 250 x 7mm or 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over andincluding backing coat\"with cement screed 10mm thick in CM 1:3 completeall as specified and as directed. |
| 11 | M&L for 25 mm thick plain cement concrete 1:2:4type B1 using20mm graded stoneaggregate as in levelling course complete all as specified. |
| 12 | M&Lfor non skid ceramic coloured joint free tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith colour of tile over and including 15 mm thick screed bed in CM 1:4complete all as specified |
| 13 | M&L fornon skid ceramic coloured joint free tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including15 mm thick screed bed in CM 1:4complete all as specified |
| 14 | All as per item no 12 above butin vertical surfaces such asin skirtings,dados etc over and including backing coat10mm thick in CM 1:3 complete all as specifiedand directed. |
| 15 | M&L for vitrified ceramic colouredtiles 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including15 mm thick screed bed in CM 1:4complete all as specified |
| 16 | All as per item no 14 above butin vertical surfaces such asin skirtings,dados etc over and including backing coat10mm thick in CM 1:3 complete all as specifiedand directed. |
| 17 | M&L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:4complete all as specified |
| 18 | All as per item No 16 above, but in risers of steps, skirting etc. |
| 19 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finishedeven and smooth without using extra cement in CM 1:4 mixedwith liquid water proofing liquid as per Manufacturers instructions on sunken slab of toilets.Note : Water proofing compound shall be measured and paid separately under relevant item. |
| 20 | M&L forwater proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.00 Kg/Sqm reinforced with non woven polyester matt black finished over and includingcompatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per Manufactures instructions and as directed . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including taking out the existing treatmen\"t of any description complete all as specified and directed.. Make: IWL India Ltd /SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note : Water proofing treatmentwork shall be executed thoughauthorised applicators of original Manufactures and necessary certificate shall be produced . |
| 21 | M&L for plain cement concrete 1:5:10 Type E2using40 mm graded stone aggregateasin foundations, filling and mass concrete complete all as specified. |
| 22 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 includingpointing in white cement 1:2 using marble dust with admixture of pigment to match with colour granite complate all as specified. |
| 23 | M&L for Rounding to edges of Granite / stone slabs one edge such as in steps, cooking platforms and other similar situations. |
| 24 | M&L for cutting out bricks, forming toothing for and bonding new into old work including value of new materials entering old walls and jointing and pointing in CM 1:6complete all as specified (Note:Measured on vertical face in contact with old wallshall only be measured and paid). |
| 25 | M&L for Brick work with fly ash bricks straight or curved on plan exceeding6 metre mean radius built in cement mortar1:6 complete all as specified |
| 26 | S&Fmild steel framed work such as grills, gratings etc., with ends of bar shouldered forged into spikes framed guard bars and similar work conforming to fe-290 gde E-165 |
| 27 | S&F Anodised aluminium (minimum 50 micron)frame for doors, windows, ventilators and grills/guard bars etc with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 28 | S&F Anodised aluminium window and ventilator shutters, sliding type / side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays, handles complete all as specified |
| 29 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 30 | S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding0.5 sqmin each pane and fixed to aluminium frame using rubber packing complete all as specifiedand as directed.. |
| 31 | S&F Figured glass, pin head type 4mm thick, and glazing with oil putty in square not exceeding0.5 sqm in each pane and fixed to aluminium frame using rubber packing complete all as specifiedand as directed.. |
| 32 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per spcification &drawing |
| 33 | S&F Factory Made Solid PVC Moulded Door Shutters28 to 30mm thick with wood free EPS (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face. supplying & fixing in frame at site as per Manufacturers instructions. |
| 34 | S&F secondclass hardwood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified. |
| 35 | S&F pressed steel frames of size 125 mmx 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified |
| 36 | S&F pressed steel frames of size 105 mmx 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified |
| 37 | M&L for fillingplain cement concrete 1:3:6 type C0 using 12.5 mm graded stone aggregate in steel door frames complete all as specified. |
| 38 | S&F 35mm thick factory made flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified |
| 39 | S&F 35mm thick factory made secondclass hardwoodrail and style ,plain framed panelled shutter two panels with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both facescomplete all as specified |
| 40 | S&F 35mm thick factory made second class hardwoodglazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats. |
| 41 | S&F 40mm thickpolished cuddapah stone slab fixed as in cub board shelvingcomplete all as specifiedand as directed. |
| 42 | S&F 19mm thick prelaminated particle board cub board shuttersexterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work both sides including 6mm thick teak wood edging alround the shutters all as specified. |
| 43 | All as per item no 41 above but both sides with decorative choice laminations as in kitchen cabinet shutter and partitions all as specified |
| 44 | S&F second class hardwood plain fillets of sectionalarea exceeding 6 sqcm but not exceeding 13 sqcm square, rectangular in section wrought fixed with screws ofall as specified. |
| 45 | S&F 30mm width of flaps continuous piano hinges stainless steel fixed to cub board shutters |
| 46 | S&F stainless steeldouble action spring hinges suitable for cabinet shutters in modular kitchen all as speicifed |
| 47 | S&F 100 mm size mild steel butt hinges, medium weight, cold rolled fixed with stainless steel screw |
| 48 | S&F 75 mm sizemild steel butt hinges, medium weight, cold rolled fixed with stainless steel screw |
| 49 | S&F Alumininum anodised barrel tower bolts of extruded section 200 mm size |
| 50 | S&F Alumininum anodised barrel tower bolts of extruded section 125mm size |
| 51 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long |
| 52 | S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long |
| 53 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 54 | S& F 100mm size stainless steel decorative coated handles suitable for Cabinet / ward robe shutters . |
| 55 | S& F 100mm size stainless steel decorative coated hasp and staple type suitable for Cabinet / ward robe shutters |
| 56 | M&L for Reinforced cement concrete ( nominal mix)1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams etc complete all as specified.Note: Reinforcement shall be measured and paid separately under relevant item. |
| 57 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work incl sides of slab, not exceeding200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified. |
| 58 | S&F mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified. |
| 59 | S&F Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes couplin ,waste pipe etcincluding bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 60 | M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1 : 3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring etc., in brick walls and making good, cutting exc 10 cm but n exc 20 cm girth complete all as specifed. |
| 61 | S&FVitreous china wash down water closet (pedestal pattern), white, of style and pattern as existing, complete with and including providingplastic seat cover, white fixedall as specified and directed.(Make: Hindware / Parryware) |
| 62 | S&FChromium platedhealth faucet with CP connection and hook fixed all as specified anddirected. Make : Parryware Cat no: T9937A1 |
| 63 | S & FPVC valveless syphonic action type, flushing cistern, low level, white, 10 litrres , with inlet ball valve, float, handle and flush pipe incl. brackets including 32 mm dia flush pipe complete all as specified. |
| 64 | S&F Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting or fixing of supply and waste pipecomplete allas specified |
| 65 | S&F brass chromium plated 32mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed. |
| 66 | S&F PVC connection 15 mm size with PTMT nuts of length 450mm. |
| 67 | S&F low density 32mm dia bore polythene waste pipe (LDPE) of pressure rating 6 Kgf / Cm2 |
| 68 | S&F Pillar taps15mm borecastcopperalloywithcapstan heads chromium plated, fancy type, screweddown high pressure with or without lettered \"hot\" or \"cold\" with long screwed shanks and fly nuts screwed for iron pipe. |
| 69 | S&F in repairs Bibtaps15mm borecastcopperalloywithcrutch or butter fly handle chromiumplatedscreweddown forironpipeorfor brassferrulefixed. |
| 70 | S&F in repairs 450 x 600 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers fixing complete. |
| 71 | S&F in repair stop valves15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed |
| 72 | S&F Brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 73 | S&F in repairs 3 in 1 wall mixer with provisionof both hand shower and over head shower Make : Jaquar (Continental) Cat No : CON-281 KN |
| 74 | S&F 5mm thick Glass shelves for bath room corner set of three (of sizes 10\",8\"& 6\") complete all as specified and directed byEngineer -in -Charge . |
| 75 | S&F in repairstoilet paper holder brass chromium plated Make: Jaquar continental Cat No .ACN -1151N |
| 76 | S& F stainless steel peg set of 5ofapproved patternby Engineer -in -charge |
| 77 | Demolition and breaking up drain pipes of any size andtype set in cement mortar |
| 78 | S&FPVC (SWR) pipes75mm bore single socketed, in any length with rubber ring joints or solvent cement, laid in floor complete all as specified |
| 79 | S&FPVC (SWR) pipes75mm bore single socketed, in any length with rubber ring joints or solvent cement, fixed to wallcomplete all as specified |
| 80 | S&FPVC (SWR) pipes110mm bore single socketed, in any length with rubber ring joints or solvent cement, laid in floor complete all as specified |
| 81 | S&FPVC (SWR) pipes110mm bore single socketed, in any length with rubber ring joints or solvent cement, fixed to wallcomplete all as specified |
| 82 | S&F PVC (SWR) bendof 110 mm bore. |
| 83 | S&F PVC (SWR) floor trap with grating including jointing and connceting to waste pipe 75 mm dia with solvent cement complete all as specified |
| 84 | S&F PVC (SWR) Gullytrap 125 / 110mm setting and jointing withsolvent cement. |
| 85 | S&F PVC (SWR) vent cowl of 110 mm bore |
| 86 | S&F PVC (SWR) junction single, (Single T) equal or unequa for 110 mm bore pipe with access door |
| 87 | S&F PVC (SWR) junction single, (Single T) equal or unequa for 75 mm bore pipe with access door |
| 88 | S&F PVC (SWR) bend of75 mm bore. |
| 89 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 90 | S&F Stack clamps for 110mm bore of pipemade out of 50 mm x 5 mmthick mild steel flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified. |
| 91 | S&F in repairs rotationals moulded polythylene water storage tanks of capacty 1000 litres (cylindrical, vertical with closed top) triple layered , hoisted and fixed in position completeall as specified |
| 92 | S&F in repairs rotationals moulded polythylene water storage tanks of capacty 500 litres (cylindrical, vertical with closed top) triple layered , hoisted and fixed in position completeall as specified |
| 93 | S&F Ball valves 25 mmhigh pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight25mm-455gms ) |
| 94 | S&F in repairs25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified. |
| 95 | S&F in repairs50mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified. |
| 96 | Taking up or taking down steel/iron tube of 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 97 | S&F20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls / floors complete all as specified. |
| 98 | Taking up or taking down steel/iron tube of 25 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 99 | S&F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittingslaid in walls/floors complete all as specified. |
| 100 | Taking up or taking down steel/iron tube of 50 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 101 | S&F 50 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittingslaid in walls/floors complete all as specified. |
| 102 | Taking down cement plaster on brick or stone walls \"o\"f\"\" \"\"any descriptionincluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified |
| 103 | M&L for Rendering 10mm thickin CM 1:6 on fair faces of brick work or concrete surfaces and finishedeven and smooth without using extra cement on internal wall surfaces. |
| 104 | M&L for Rendering 10mm thickin CM 1:4 on fair faces of brick work or concrete surfaces and finishedeven and smooth without using extra cement on ceiling surfaces. |
| 105 | M&L for rendering 10mm thick in CM 1: 6 as under layer and 5mm thick in CM 1:4 mixed with water proofing compound as finishing layer to external wall surfaces and finishing the surface even and smooth includingtaking down existing cement plaster if necessary. Note: WPC shall be measured and paid separately |
| 106 | Supply only integralliquid water proofing compound. |
| 107 | M&L for complete removal of existing treatment f\"romwalls and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty to internal wall surfaces complete all as spcd and as directed. |
| 108 | M&L for preparing new plasteredwall surfacesandapplying two coat of oil bound distemper over a coat ofprimercomplete all as specifiedand as directed. |
| 109 | M&L for preparationof old decorated ceiling surfaces including necessary scaffolding and applying one coatsof white wash including filling the cracks/depressions using chalk whitening wherever required completeall as specified |
| 110 | M&L for preparing new plasteredceiling surfacesandapplying three coats of white wash complete all as spcd and as directed. |
| 111 | M&L for complete removal of existing treatment on walls and applying two coats of exterior weather proof paint over a coat of weather proof primer to all external wall surfaces complete all as specifedand as directed. |
| 112 | M&L for preparation of new steel surface of any description ,over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifiedand as directed. |
| 113 | M&L for preparation of new wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifiedand as directed. |
| 114 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifiedand as directed. |
| 115 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm inwidth or girth andapplying one coat of synthetic enamel paint complete all as specifiedand as directed. |
| 116 | M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even and smooth without using extra cement complete all as specified. |
| 117 | M&L for removing the existing roof treatment of any description completely and removel of all the debris from site and rubbish off the premises complete all as directed. |
| 118 | M&L for cementsceed bed20mm thick incement mortar 1:4 mixed withliquid water proofing compound all as per manufacturers instructions on roof surface complete all as specified. Note:WPCshall be measured and paid separately |
| 119 | M&Lfor water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.80 Kg/Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per Manufactures instructions . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures : IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note : The work shall be carried out throughauthorised applicators of Manufactures |
| 120 | S&F Heat resistance terrace tiles (300mm X 300mm X20mm with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on water proof and sloped surface of terrace, laid on and including20mm thick cement sand mortar in the ratio of 1:4 and grouting the joints with mix of white cement and marble powder in ratio 1:1 including rubbing and polishing the surface upto 3 cuts complete, including providing skirting upto 150mm height along the parapet walls in the same manner complete all as specified and directed . |
| 121 | M&L for Reinforced cement concrete ( nominal mix)1:2:4 type B1 using 20mm graded stone aggregate as in columnscomplete all as specified.Note: Reinforcement shall be measured and paid separately under relevant item. |
| 122 | M&L for Reinforced cement concrete ( nominal mix)1:2:4 type B1 using 20mm graded stone aggregate as in beams complete all as specified.Note: Reinforcement shall be measured and paid separately under relevant item. |
| 123 | M&L for use and waste of formwork to sides ofcolumns , flat , fair finished surfaces of concrete complete all as specified. |
| 124 | M&L for use and waste of formwork to sides ofbeams , flat , fair finished surfaces of concrete complete all as specified. |
| 125 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified |
| 126 | S&F mild steel TMT bars upto 10mm dia as in stirrups, cut to length, bent to shape required incl cranking, hooking ends and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified. |
| 127 | M&L for cutting holes into or through cement concrete slabs, chajjas etc., reinforced or otherwise superficial area exc 500 sqcm but n exc 0.1 sqm complete all as specified and directed. |
| 128 | S&F Mild steel, plain black sheet covering 1.0 mm thick to door shutters, chullah hoods water tanks cut to size, holes punched incl round headed screws or rivets fixed to steel members etc.complete all as specifiedand as directed. |
| 129 | INTERNAL ELECTRIFICATION: |
| 130 | Taking down carefully copper point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit all as directed. |
| 131 | M&L forPoint wiring complete with 1.5 sqmm single core FRLSH PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telphone socket,including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good tofacing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth all as specified and as directed. |
| 132 | One light point controlled by one switch. |
| 133 | One Ceiling fan point controlled by one switch and one regulator. |
| 134 | One 3 pin 5 amps switch socket on independent board. |
| 135 | One 3 pin 5 amps switch socket on same board along with other switches. |
| 136 | One exhaust point controlled by one switch |
| 137 | One bell point controlled by bell push switch on independent board. |
| 138 | One light point controlled by two 2 - way switches |
| 139 | All as per item No.130 above but with 4 sqmm copper conductor FRLSH cable with 4 sqmm PVC copper conductor FRLSH cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch15/16 Amps on independent board all as specified and as directed. |
| 140 | M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 4 runs of 10 sqmm FRLSH including two run of 10 sqmmsingle core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping includingaccessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old submain wiring of any description and size completall as specified and directed.Note :4runs of 10 sqmm single core multistandred copper conductor and tworuns of earth conduit conductor and one length of PVC conduit and its accessories shall be measured as oneunit length. |
| 141 | M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm FRLSH includingone run of 6 sqmmsingle core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping includingaccessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old submain wiring of any description and size completall as specified and directed Note :2runs of 6 sqmm single core multistandred copper conductor and one run of earth conduit conductor and one length of PVC conduit and its accessories shall be measured as oneunit length. |
| 142 | S&F in repairs metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 240 Volts 20Amps all as specified and as directed. |
| 143 | S&F in repairsWall mountedLED 20W Batten Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver all as specified and as directed. |
| 144 | S&F in repairswall mounted LED batten,Extruded aluminium housingprovided efficient heat disipation withpolycarbonate diffuser with integrated electronic driver high efficacy.short circuit & voltage cut off protection, wide opearting voltage range of 140V to 270V wide, lumen output of 1050,10W including lamp with complete all as specified and as directed. |
| 145 | S&F in repairsEnduraPEARL 30 W MPBldg Sec lights New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminarie with high power LEDs as light source and electronic driver of Lamp type:30W LED 6000K all as specified and as directed. |
| 146 | S&F in repairs MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 160 Amps rated busbar with neutral link,415 Volts 4 wayfixed on wall duly grouted in solid block wall or on wooden board with electrical connection completeall as specified and directed. |
| 147 | S&F in repairsMCCB four pole , 415 Volt, 63 Amps,16 KA , adjustable thermal & fixed magnetic settingcomplete all as specified and directed. |
| 148 | S&F in repairsMCB SP 230 volts,40amps \"C\" Curve 10 kA Capacitycompleteall as directed. |
| 149 | S&F Ceiling rose surface bakelite 65mm x 50 mm two to three terminals |
| 150 | S&F Modular switch 2 way 6A, 1 module, 240 Volts |
| 151 | S&F Modular switch 1 way 6A, 1 module, 240 Volts |
| 152 | S&F Modular switch 1 way 16A, 1 module, 240 Volts |
| 153 | S&F Modular Socket, 6A - 2/3 pin combined 2 module |
| 154 | S&F Modular socket 6 A/ 16 A -2/3 pin combined 2 module |
| 155 | S&F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 156 | S&F Modular Bell push, flush type, 5 Amp |
| 157 | S&F bell ding Dong 230V AC single pole |
| 158 | S&F Modular Fan step regulator, 100W - 2 module for ceiling fan of 1200 mm sweep |
| 159 | S&F ceiling fans, complete with three blade white incolour , down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor230 volts, with not more than 50W, with canopy complete all as directed. |
| 160 | S&F repairsexhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed . |
| 161 | S&Fexhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louversall as specified and as directed. |
| 162 | S&F in repairsGeyser ( Electric storage waterheater), electric operated, AC, 230 Volts, 50Hz of capacity 25 litres,Vertical type Energy efficient5 star rating of suitable storage tank including incoming & out going PVC connection pipe of suitable lengh for Hot water and cold water, washers, On/Off thermostatcontrol knob,Indication lights etcall as per IS specification complete all as specified and as directed Note: Oldgeyser shall be deposited to MES Store |
| 163 | Taking down existing old ceiling/ Exhaust fan, sealing cable end, dismantling blades and removing fan and blades to and depositing the sameto MES store yard without any damage including necessarytransporation and labour charges complete all as directed Note: Oldceiling fan/exhaust fan shallbe deposited to MES Store |
| 164 | S&Fmain meter board wall mounted vermin proof factory made Indoor type fabricated 14 Gauge (2 mm) sheet door fixed hinges on angle iron frame and complete with locking arrangement spare space 02 No\"s SPN MCBs and painted with two coats of synthetic enamel paint over one coat of red oxide primer suitable for 3 phase 415 V busbar- 200 Amps, 50 Hz, 3 Phase 4 wire Aluminium Busbar complete with the following accessories |
| 165 | (a) Incoming: 125 A 4 pole 25 kA MCCB -01 No |
| 166 | (b) Busbars 200 A TPN & Earth-1 No |
| 167 | (c)) Outgoing: MCBSPN 63A -01 No |
| 168 | (d) Outgoing: MCB TPN 63A -04 No\"s |
| 169 | (e) 16 Amp SP, 10 kA MCB - 5 No\"s |
| 170 | (f) Electronic meters temper proof LCD display with polycarbonate cover 3 Phase, 415 volt, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWHr incl all connected connection complete all as specified and directed by Engr-in-charge - 04 No\"s Note: Old Meter shall be deposited to MES Store yard |
| 171 | (g) Electronic meters temper proof LCD display with polycarbonate coversingle phase 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWHr incl all connected connection complete all as specified and directed by Engr-in-charge - 01 No\"s Note: Old Meter shall be deposited to MES Store yard |
| 172 | M&L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed. |
