|
| 1 | Dismantling of brick tiles or terracing tiles, single layer on roofs including taking down existing water proofing treatmentinclcement mortar of any descriptionand disposal rubbish out side MD land and hacking for key scrubbing down with water complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description as in roofs, floors (other than grnd floor) and similar suspended works complete all as specified and directed. |
| 3 | Dismantling of asbestos cement (corrugated , semi-corrugated etc) sheets/CGI Sheetsincl ridges in roof coverings complete all as specified and directed. |
| 4 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | Disconnecting existing water tank, setting aside (or lowering if required) for repairs, cleaning etc & hoisting & refixng in position capacity n. exc 500 ltrs complete all as specified and directed. |
| 6 | Dismantling and taking down water tanks of any description, n exc 1000 ltr capacity and removing from site complete all as specified and directed. |
| 7 | Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 8 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articalscomplete all as specified and directed. |
| 9 | Taking down cement plaster on wall & ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 10 | Taking up or down steel tubing and connections of 15 mm bore including fittings of any type and material complete all as specified and directed. |
| 11 | Taking up or down 20 mm dia steel tubing and connection including removal of fittings of any type and material complete all as specified and directed. |
| 12 | Taking up or down 25 mm dia steel tubing and connection including removal of fittings of any type and material complete all as specified and directed. |
| 13 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 14 | Preparation of concrete/Plastered surfaces by scrubbing downwith steel brushes and cleaning with water all loose dirt/dust and applying following roof treatment complete all as specified and directed:-(a) Applyingbituminous primer coatconforming to IS-3384 @ 0.4 Kg/Sqm cover prepared surface till the surface is properly impregnated and insolvent oil primer shall be allowed to evaporate completely.(b)Applying water proofing treatment by using APP polymembrane mineral finished over roof and including vertical surfacesand providing APP membrane having non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sqm and finished on top with mineral/slate finished laid with 100 mm & 150 mm over lap on side & end laps respectively complete all as per manfucturer\"s instruction. The membrane has to be laid with LPG torch and overlap sealed and finished neat.All joint and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @ of 200ml/Bag of cement and curved before laying membrane. |
| 15 | M&L for 50mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone agg) as in padding top surfaces to be finished even & smooth without using extra cement complete all as specified and directed. |
| 16 | Rendering 20 mm thick in CM 1:4 finished even & smooth using liquid water proofing compoundDr Fixit or equivalent @ 200 Ml/50 Kg of cement over RCC roof padding etc complete all as specified and directed. |
| 17 | Supply only liquid integral water proofing admixture of make pidilite or its equivalent complete all as specified and directed. |
| 18 | S&F Rotational moulded polyethylenewater storage tanks double layred (cylindricalvertical with closed top ) hoisted and fixed in position,complete of 1000 litre capacity complete all as specified and directed. |
| 19 | Stop valve 20mm dia, chromium plate fancy type with capstan head long shank and cup complete all as specified fixed in repair complete all as specified and directed. |
| 20 | S&F Ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed of 20 mm bore dia complete all as specified and directed. |
| 21 | S&F ofPre- painted galvalume aluminum zinc coating GI based corrugated profile sheet TCT with gsm -150sheet 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws complete all as specified and directed. |
| 22 | S&F ofPre- painted galvalume aluminum zinc coating GI based plain profile sheet TCT with gsm -150sheet 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws complete all as specified and directed. |
| 23 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed. |
| 24 | S&F 4mm dia galvanised steel wire,150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed. |
| 25 | M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat zink chrome red oxide primer complete all as specified and directed. |
| 26 | S&F in for mild steel bolt machine made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia of neck 12mm including taking out old unserviceable bolts with nuts and washers complete all as specified and directed. |
| 27 | Dismantiling of loose concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling and also remove any existing treatment on RCC surface by rubbing, scrapping etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusingnecessary form work & scaffolding up to Three storey complete andsurface of guniting to be finished fair and even with and including10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting,white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractor on this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separately. |
| 28 | M&L for Mild steel TMTbar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed) for rebaring complete all as specified and directed. |
| 29 | M&L for welded steel wire fabric weight n exc 2 Kg/sqm complete all as specified and directed. |
| 30 | M&L for Nominal mix Type B0 (1:1.5:3) (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors,chajjas, balconies, canopies, deck slabs and in shelves blocks etc and the like complete all as specified and directed. |
| 31 | S&F Formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed. |
| 32 | M&L for Mild steel TMT bars 05 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binder and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 33 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6complete all as specified and directed. |
| 34 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6 (except bricks) i.e. by using old bricks after proper cleaning)complete all as specified and directed. |
| 35 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 36 | M&L for 15mm thick renderingof brick wall in CM 1:6 finished even & fair on other than fair faces up to ceiling hieght including required scafolding etc complete all as specified and directed. |
| 37 | M&L for 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & fair with using WPC up to G+2 hieght including required scafolding etc complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 38 | M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extracement including required scafolding complete all as specified and directed. |
| 39 | M&L for preparation of newly plastered surfaces of ceiling applying two coats of oil bound distemper over and including a coat of primercomplete all as specified and directed. |
| 40 | M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 41 | M&L for 1mm thick wall care putty on wall and ceilings complete all as specified and directed. |
| 42 | M&L for preparation of newly plastered surfaces of wall and Applying two coat of cement based paint over and including one coat of primer on wall with roller/ brush including initial and final curingon wall complete all as specified and directed. |
| 43 | M&L for preparation of newly plastered surfaces of wall and applyingthree coats of whitewash complete all as specified and directed. |
| 44 | M/L for preparation of newly plastered surface of walls and applying two coat of oil emulsion distemper/ acrylic washable distemper over and including a coat of primer complete all as specified and directed. |
| 45 | M/L forpreparation of newly plastred surfaceof walls and applying two coat of exterior weather proof anti algae paint over and including a coat of primer, complete all as specified and directed. |
| 46 | Supplying and Applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed.Note : The Coverage is to be strictly maintained for film formation. |
| 47 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 48 | Supplying and laying of 16 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11with all fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 49 | S&F GI steel tubing 20mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 50 | S&F GI steel tubing 25mm bore mediumgrade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 51 | S&F in repairs for vitreous china wash basin white flat back size 550x400mmbut exclusive taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipes upto floor trap, pedestal & brackets complete all as specified and directed. |
| 52 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern ) including connection to trap and to flush pipes etc and lime concrete bedding & flush pipe complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 53 | S&F in repair vitreous china wash down water closet pedestal pattern white with plastic seat cover and flush pipe (excluding fixing of bolt of flushing cistern) including all fitting complete all as specified and directed. |
| 54 | S&F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. |
| 55 | S&F in repair 15mm bore bib tap two in one long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. |
| 56 | S&F in repairs 15mm bore stop valves,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 57 | S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 58 | S&F 15mm bore PVC connection 600mm longheavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed. |
| 59 | S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed. |
| 60 | S&F in repair 15 mm bore, brass CP wall mixer two in one for mixing hot and cold water screwed down for iron pipe complete all as specified. |
| 61 | S&F in repairs looking mirror of 6mm thickin decoratied frame , screwing with high quality ss glass fixer / holder sleeves at corners complete all as specified and directed. |
| 62 | S&F 15 mm dia & 1m long flexible SS braided cord health faucet incl chromium plated wall hook fixed to wall complete all as specified and directed. |
| 63 | S&F in repairs brass chromium plated shower rose 125 mm dia with swivel joint including shower arms in suitable lengthcomplete all as specified and directed. |
| 64 | M&L joint free Non Skid ceramic coloured tiles (also in patches) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:6 complete all as specified and directed. |
| 65 | M&L joint free Non Skid ceramic coloured tiles (also in patches) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 66 | M&L first quality coloured glazed ceramic, joint free tiles fixed in pattern of different colour including border of size300x450x7 mmthick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on over and including 10 mm thick rendering in cement mortar (1:4), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. |
| 67 | M&L for joint free Non Skid ceramic coloured tiles 7 to 8mm thickarea of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screeding in CM 1:6 complete all as specified and directed. |
| 68 | M&L joint free Non Skid ceramic coloured tiles (also in patches) 7 to 8mm thickarea of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. (screed bed shall not be measured and paid separately). |
| 69 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame)n. exc 1.5 sqm including making good dismantled portion by brickwork, concrete (1:2:4) or CM(1:3) and plastering complete all as specified and directed. |
| 70 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each complete all as specified and directed. |
| 71 | S&F Powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 72 | S&F in repair Powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. hydraulic door closer complete all as specified and directed. |
| 73 | S&F for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long hinge type B-21 100mm long suitable handle and tower bolts complete all as specified and directed. |
| 74 | All as per item No. 73 above, but wire gauzed window complete all as specified and directed. |
| 75 | S&F 4.5 mm thick tinted glass each panes fixed on aluminium door shutter with and including aluminium beading, rubber gasket etc complete all as specified and directed. |
| 76 | S&F 3 mm thick aluminium composit panel sheet any size fixed ondoor/ window/cupboard shutters with and including beading/ putty/ rubber gasket etc complete all as specified and directed. |
| 77 | S&F in repair 3 mm thick sheet glass panes any size fixed ondoor/ window shutters with and including beading/ putty/ rubber gasket etc complete all as specified and directed. |
| 78 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 79 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 80 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 81 | All as per item No 80 above, but size 65 x 125 mm complete all as specified and directed. |
| 82 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid type/ Plain flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant & fixing with stainless steel butt hinges on door with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. |
| 83 | All as per item No 82 above, but size 30 mm thick complete all as specified and directed. |
| 84 | S&F for 30mm thick plain WPC factory made wire mesh solid door shutter (confirming as per Is 4020) with density not less than 600 KG/Cum Manufactureed by anISO 9001-2015 certified company. The door to be pannened with SS mosquito mesh (Wire cloth used shall be of 0.36 mm nominal dia and average width of aperture 1.40mm) for additional strength and safety purpose Door should be fixed with SS hinges and SS screwDoor should be water proof fire retardant and having screw holding capacity complete all as per manufacturer specification and drawings and as per direction of EIC Note:- Wiremesh shall not be meaured separately |
| 85 | S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 86 | S&F 200mm stainless steelhandle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 87 | S&F in repair 150 mm stainless steelhandle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 88 | S&F 200 mmstainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 89 | S&F in repair 150 mmstainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 90 | S&F 250 mmStainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 91 | S&F200mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 92 | S&F in repair200mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 93 | S&F 75mm long stainless steel door stopper of double legged with rubber shoes in bottomcomplete all as specified and directed. |
| 94 | S&F in repair 75mm long stainless steel door stopper of double legged with rubber shoes in bottomcomplete all as specified and directed. |
| 95 | M&L for taking down and refixing the door shutter with frame in same opening after Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed. |
| 96 | S&F in repair 250 mmStainless steel sliding door bolt with hasp and staple (bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 97 | S&F in repair 200mm stainless steelhandle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 98 | S&F in repair 200 mmstainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 99 | S&F in repair stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 100 | S&F in repair, stainless steel curtain rods of 25mm diaas in doors/ windows SS brackets fancy type including screws and other necessary fitting (knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. |
