|
| 1 | Taking down chowkats without taking off shutter from chowkats area n.exc 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed. |
| 3 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | All as per item No. 3.00 above, but size 65 x 125 mm complete all as specified and directed. |
| 5 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 6 | S&F for Factory made solid panel PVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed. |
| 7 | S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 8 | S&F 200 mmstainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 9 | S&F 300 mmStainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 10 | S&F300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 11 | S&F 75mm long aluminum anodised extruded typedoor stopper of double legged with rubber shoes in bottomcomplete all as specified and directed. |
| 12 | S&F powder coated aluminium anodized three track three panels sliding window,shutter glazed and gauged of stainless steel wire cloth nominal dia of wire 0.36mm and average width of aperture 1.40mm along with aluminium section with 50 micron anodizing size of frame 100mmx25mmx16 gauge,size ofshutter, top, bottom and side rail 19mmx38mmx16 gauge aluminium section with 50 micron anodizingand 5mm thick black / tinted sheet glass to be fixed on glazed portion and necessary stainless steel hooks and eye to be provided as stay of shutter etc complete including necessary jointing cleats, glazing clips, rubber packing attached aluminium snap beading, screws anodized aluminum fitting such as suitable handle & auto locking arrangement etc complete all as specified and directed. |
| 13 | M&L foraluminium grill of mesh size 65 x 75mm of 6mm dia of aluminium bar fixed with \"Y\" or \"H\" aluminium sec complete all as specified and directed. |
| 14 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube incl suitable metal stifner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. |
| 15 | S&F factory made solid panelPVC moulded door shutter 28 to 30 mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face with particle board corecomplete all asspecified and pattern & design complete all as specified and directed. |
| 16 | S&F PVC handle 150mm size complete all as specified and directed. |
| 17 | S&F PVC but hinges 100mm size complete all as specified and directed. |
| 18 | S&F PVC tower bolt 150mm size complete all as specified and directed. |
| 19 | S&F in repairs fancy type stainless steel curtain rods of 25 mm dia for doors/ windows etc including SS brackets and SS funnels/dome complete all as specified and directed. |
| 20 | Providing & Fixing Ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO .50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4 ) -1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing including dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover filletsand complete all as specified and directed. |
| 21 | Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed |
| 22 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.(Note : Debris obtained from dismantling will be dispossed off as directed) |
| 23 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copings, kerbs, filling for fixing of hold fast etc including necessary formwork etc complete all as specified and directed. |
| 24 | M&L 40mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in floorto receive tiles complete all as specified and directed. |
| 25 | M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 26 | M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 27 | All as per Item No 26.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 28 | M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) andjointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed. |
| 29 | Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar complete all as specified and directed.(Note : Debris obtained from demolition will be dispossed off as directed) |
| 30 | Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed. |
| 31 | Machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thickcement screed bed in CM 1:6 laid and joint jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 32 | M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm gradedcrushed stone aggregate) as in sub base complete all as specified and directed. |
| 33 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade, set, jointed over 25 mm thick sand cushoning complete all as specified and directed. |
| 34 | Providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar complete (1:4) with joints to match complete all as specified and directed. |
| 35 | M&L 75 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection and paving laid in alternate bays finished finish even and smooth wihtout using extra cement complete all as specified and directed. |
| 36 | Demolition of brick work of any description and in any positionbuilt in cement mortarincluding quoins arches and pillars complete all as specified and directed. |
| 37 | M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed. |
| 38 | Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 39 | M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall even and smooth complete all as specified and directed. |
| 40 | M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer\"s instructions, surfaces finished even and smooth complete all as specified and directed. Note:-WPC measured and paid separately. |
| 41 | M&L for preparation ofnew plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat ofprimer and wall care putty for getting smooth surfacecomplete all as specified and directed. |
| 42 | M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of oil bound distmper of any colour on old surfaces of wall over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed. |
| 43 | M&L for preparation of new plastered surfaces and applying two coat of weather coat exterior painton wall surfaces over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed. |
| 44 | M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of exterior emulsion paint (weather proof anti algae) over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed. |
| 45 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide& over 10cm width or girth complete all as specified and directed. |
| 46 | M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed. |
| 47 | Taking up or down 15 mmbore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 48 | S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed. |
| 49 | Taking up or down 20 mmbore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 50 | S&F 20 mm bore galvanized steel tubes medium grade with all fittings laidin walls complete all as specified and directed. |
| 51 | Dismantling PVC water tanks of capacityexc 500 ltr but n exc 1000 ltr and removing to store complete all as specified and directed. |
| 52 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etcincluding GI nipple of suitable size complete all as specified and directed. |
| 53 | S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed 20mm bore complete all as specified and directed. |
| 54 | S&F in repairs 20mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F in repair vitreous china WHB white flate back size 550x400mm complete all as specified and directed. |
| 56 | S&F 600 mm x 450 mm bevelled edge mirror, mounted on 6 mm thick plywood and fitted to wooden plugs with CP brass screws andcup screws including taking down old unserviceable mirror complete all as specified and directed. |
| 57 | S&F in repair vitreous chinaware EWC water closet pan (Padestal pattern), white with and including white seat & cover with flat bottom withCP hinging device complete all as specified and directed. |
| 58 | S&F in repairvitreous china squatting pan \"Orrisa pattern\" size 580x440mmwhitewith integral foot rests any patternand making connection with & including CI P/S Trap, etccomplete all as specified and directed. |
| 59 | S&F in repair of PVC low level flushing cistern white 10 Ltrs capacity with inlet 15mm bore ball valve, float and handle incl brackets, incl PVC connection 300mm with flanges at both ends screwed down to 15mm bore pipe and 32mm bore PVC flush pipe of required length complete incl taking out of existing flushing cisterns complete all as specified and directed. |
| 60 | S&F in repairs Chromium plated brass soap dish/ tray fixed with wallcomplete all as specified and directed. |
| 61 | S&F in repair 15mm bore CP fancy type bib tap with capstan head including flange complete all as specified and directed. |
| 62 | S&F in repairs 15mm bore CP fancy type bib tap two way with capstan head fixedcomplete all as specified including flange complete all as specified and directed. |
| 63 | S&F in repair stop valve concealed type 15mm bore of cast copper alloy,fancy type of CP with long shank and cup, high pressure screwed both ends for iron pipe or unions and fixed complete all as specified and directed. |
| 64 | S&F in repair 15mm bore chromium plated stop valve/angular cockscrewed down high pressure with capstan head and flange complete all as specified and directed. |
| 65 | S&F in repairs pillar taps fancy type (ISI marked) cast copper alloy cp with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore all as specified and directed. |
| 66 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as specified and directed. |
| 67 | S&F in repair hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed. |
| 68 | S&F in repair 80 mm dia shower rose, brass chromium plated with swivel joint complete all as directed. |
| 69 | S&F in repair sinks with drainage board of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling complete all as specified and directed. |
| 70 | S&F in repairsstainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed. |
| 71 | S&F in repair stainless steel gratings suitable for 100 mm floor trap complete all as specified and directed. |
| 72 | S&F in repair PVC waste pipe 32/40mm dia suitable for Sink/Urinal etc complete all as specified and directed. |
| 73 | S&F in repair PVC connection 450mm long brass chucknut bolt ends for fixing 15mm dia pipe complete all as specified and directed. |
| 74 | Dismantling of 75 to 100 mm dia cast iron or reinforced concrete drain pipes incl bends etc, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 75 | S&F 75 mm bore cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in floor/trenches or in floors all as specified and as directed. |
| 76 | S&F 100 mm bore cast iron soil waste & vent sand castpipes in any length with or without ears, with cement joints,laid in floor/trenches all as specified & directed. |
| 77 | Dismantling of boarding, any descripsion, fixed in any position with nails all as specified and directed |
| 78 | M&L 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 79 | All as per item No 78.00 above but fixed in shelf and partition, ceiling etc complete all as specified and directed. |
| 80 | S&F of S&F Continuous (piano) hinges, mild steel, bright finish or elecro galvanisedwidth of flaps when open in 30 mmcomplete all as specified and directed. |
| 81 | M&L 125mm size stainless steel handles complete all as specified and directed. |
| 82 | S&F 125 mm size aluminium anodised hasp and staple, safety type,with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed. |
| 83 | Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges complete as directed. |
| 84 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 85 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed. |
| 86 | S&FPlates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment etc incl mild steel screw bolts (machine made) with hexagonal or square heads at one end & washers as reqd conforming to Fe 410W .Gde-E-250, quality-A. |
| 87 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified & directed |
| 88 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed. |
| 89 | Dismantling of unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 90 | S&F5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed. |
| 91 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 92 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. |
| 93 | M&L for concealed point wiring for the following the PVC insulated and unsheather cable 1.5 sqmm (nominal area) multistranded copper conductor 1100 v FRLSH grade single core including PVC conduit medium grade of appropriate size (not less than 25 mm dia) ISI marked concealed in wall and surface on ceiling complete with all accessories and all as specified including 1.5 sqmm PVC insulated unsheather multistranded copper conductor to common earth and connected to earth dolly for following :- (Note) : 1.The cuttingchases shall b finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost. 2. Rate quoted by the contractor deemed to be included metal flush box of suitable size as required at site and 3 mm thick laminated sheet suitable for mounting of switch and socket etc . |
| 94 | All as per item No 93.00 above but upto ceiling height and on surface at ceiling/ wall butone point(light/fan) controlled by one switch complete all as specified and directed. |
| 95 | All as per item No 93.00 above but for one 3 pin 15 Amps socket outlet independentwith 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit complete all as specified and directed. |
| 96 | All as per item No 93.00 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed. |
| 97 | All as per item No 93.00 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed. |
| 98 | S&F in repair switch piano 5 Amps one way complete all as specified and directed. |
| 99 | S&FSwitch 15 Amps flush type complete all as specified and directed. |
| 100 | M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. |
| 101 | Supply and fix LED Alumimium batten luminaire surface mounted, 4 feet system wattage of 20/22 Watts with lifetime ofnot less than 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, , surge protection 3KV in CM, IP-20n Protected, meets LED IS specifications, Class-1, Short circuit and over circuit protection, voltage range-150 to 270 Vots AC, System effiency at luminaire lelvel > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixe complete all as pecified and directed by Engr-in-charge. Note:- All the above mentioned specifications will be verifed through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures. |
| 102 | M&L for energy efficient LED light fittings [2\"x2\"size] with tube 36 watt or minimum lumen ouput is not less than 3600 lumens 230v recess mounting type including connecting with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 103 | M&L in replacement forsubmain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 2.5 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 104 | All as per item No 103 above but for cable of size 4 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit complete all as specified and directed. |
| 105 | Supply and fixing in repair TPN DB\"s 4 way vertical type 415 V, double door suitable for housing of 100 A/63 A MCCB as main incoming complete all as specified and directed. |
| 106 | S&F of MCCB ofcapacity 100 Amps, fixed thermal and magnetic release, 4 Pole, 16 KA suitable to be fixed in 4 way TPN DB complete all as specified and directed. |
| 107 | Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 108 | M&L for MCB single pole 240 volts 5 to 30 amps, with rupturing capacity 10 KA \"C\" series using thimbles of required size complete all as specified and directed. |
| 109 | S&F MCB SP 40 Amps, 10 KA, \"C\" Series with rupturing capacity 10 KA complete all as specified and directed. |
| 110 | M&L MCB single pole & neutral 240 volts 30 to 40 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. |
| 111 | M&L for single pole and neutral enclousere with a top pin, earth plug and socket complete with one SPN MCB 20 Amps, 240 Volts complete all as specified and directed. |
| 112 | Disconnecting electrically, taking down existing ceiling/exhasut fan any type and capacity with due care, dismantling blades and deposit to MES Store for repairingwith all accessories complete all as specified and directed. |
| 113 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 230 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor wih remote (BLDC) complete all as specified and directed. |
| 114 | Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed. |
| 115 | S&F in replacement of rigid steel conduit welded cut to pieces of size 20mm dia treated both ends for hanging ceiling fan 1200/1400mm size incl necessary hook calmps both sides withnuts bolts, rubber real etc complete all as specified and directed. |
| 116 | M&L for fixing of fan hookon the girder/ GI tube at existing or new location inside the hanger or buiding, above or below of fall ceilingat any hight of Bldg P-3 at ASC COY complete all as specified and directed. |
| 117 | Supply and lay pipe galvanized, “Medium class”, on the wall roof for hangingof ceiling fansand making good wall surface as existing including 40 mm dia complete all as specified and directed. |
| 118 | Supply and fixing PVC exhaust fan 300 mm sweep 230 volt single phase including PVC louvers including minor PCC work if required complete all as specified and directed. |
| 119 | Supply and fix in replacement of High power LED Security light 22/25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as specified and directed. |
| 120 | M&L for Earthing complete with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 ocomplete all as specified and directed and testing on completion. |
| 121 | Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and directed. |
| 122 | Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,foundation filling of poles or stays and for rerouting of cables complete all as specified and directed. |
| 123 | Returning filling including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required complete all as specified and directed. |
| 124 | Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 125 | M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretchingand testing the cable complete all as specified and directed.Note:- Punned thickness shall be measured and paid. |
| 126 | M&L for Sub class ‘B’ bricks old size laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required complete all as specified and directed. |
| 127 | Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 120 Sqmm 3.5 core complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 128 | Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 Sqmm 3.5 core complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 129 | Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 50 Sqmm 3.5 core complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 130 | Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35Sqmm 3.5 core complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 131 | Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 4 core complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 132 | Supply and laying in trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core complete all as specified and directed. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification) |
| 133 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 core complete all as specified and directed |
| 134 | Material and labour for GI tubing light grade 50mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and directed. NOTE-clamps for fixing pipe, nuts, bolts washers shall be included in quoted unit rate.. |
| 135 | All as per item No 134 above but 40mm bore complete all as specified and directed. |
| 136 | Supply & fix of cable PVC insulated flexible Copper conductor cable of size 1.5 Sqmm 3 core cut to pieces all as required for connetion with proper thimbles, drawn in existing/new GI pipefixedto wall or pole complete all as specified and directed. |
| 137 | S&F of bus bar chamberoutdoor type of size 400 x 380 x 190 mm made out of MS sheet 2 mm thick with200 Amp alum bus bar three phase & neutral each 320 x 20 x 6 mm of size fixed on insulators and fixing on steel pole with proper clamps, nuts, bolts & washers of required size and making connection of LT cables with thimbles, glands and making good the disturbedsurfaces incl water proof PVC sticker like danger mark all as required at site complete all as specified and directed. |
| 138 | Supply andinstallation, connecting eclectically & commissioning of LT feeder pillar box outdoor type of size 0.90 x 0.60 x 0.50 Mtr size factory fabricated made out of MS sheet of thickness 3.15 mm front door openable with locking arrangement mounted on angle iron legs made out of angle iron of size 40x40x6mm, 1.5 mtr long, 1.0 mtr above ground level and 0.50 mtr embedded in PCC blocks of size 0.30x0.30x0.50 mtr- 04 Nos duly painted with two coats of synthetic enamel paint over a coat of red oxidecomplete with 200 amps rated aluminium bus bar suitable for 3 phase 4wire supply system duly drilled holes and makingall cable connection with proper thimbles mounted on epoxy based post insulators and one MCCB 100 Amps 4 pole 415 Volt, 35 KA complete all as specified and directed. |
| 139 | Dismantling from insulators and taking down ACSR conductor any size from HT/LT over head lines and depositing to MES store yard complete all as specified and directed. |
| 140 | Dismantling insulator any type and any size fromHT/LT over head lines and fixing other side or depositing to MES store yard complete all as specified and directed. |
| 141 | Dismantling, cross arms, clamps, supports made of channels or angle section etc including nuts and bolts and setting aside for reuse on the same or new location or depositing to MES store yard complete all as specified and directed. |
| 142 | S&F in replacement of weatherproof junction box of size 325x220x150 mm outdoor type made out of thermo polycarbonat to accmmodated 04 Nos aluminium bus bar of size 25x6 mm rating 200 Amps and MCB SP 6 Amps IP-65 with hinged door and triangular locks water proof, shocked proof, rust proof, corrosion free, acid resistance/fire retardent and self extinguishingUV resistance complete fixed on pole with flat iron clamps of size 25 x 3mm, nuts, bolts, washers etc., including two coats of synthetic enamel paint over a coat of redoxide zinc chrome primer on iron/steel parts complete all as specified and directed. |
| 143 | Supply, fixing, testing and comissioning of automatic street light switch of capacity 8 KW in single phase using nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contactor, MCB and support terminals enclosed in pole / wall mounted enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangementwith suitable size of FI clamps 02 Nos with complete acessories as under including taking down old street light switch complete all as specified and directed. (i) Contactor rating (AC3) single phase, 50-63 Amp(ii) MCB 63Amps (SP),10 KA, 240 volts(iii) NATURESWITCH-01 |
| 144 | Supply and fixingin replacement of LED street light fitting90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed. |
| 145 | M&L for Earthing complete with galvanised iron earth plate electrode of size 600x600x6.3 mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using galvanised iron strip 32x6mm as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil reaming surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge incl testing on completion. |
| 146 | M&L for drilling manuallyin soft / loose soil under road / hard standing / culvert / nala of suitable bore for protection cable & pipe upto 80 mm bore complete all as specified and directed. Note: Depth of bore shall not be more than 1 Mtr from original ground level. |
| 147 | Supply & laying DWC pipe of 38 mm internal and 50 mm outer dia for cable protection complete all as specified and directed. |
| 148 | Supplyfixing cutting welding jointing etc toLT cable rout indicator made out by MSangle60 CM long in size40 MM x 40 MM and5 MM thick as stand and 6 inch dai with 5 MM thick rounded incating plate continious welding on top edge of standincl painting in two coats using syenthatic enamelled paint over one coat of primer red oxide and stand grouting in cement concrete brick foundation minium 30 CM etc to be fixed complete all as specified and directed. Note : (i) Indicating sign shall be emboused on MS round plate andcost cement concrete work shall be included in quoteditem rate. (ii) Quoted rate shall be included cost for required earth work to trace the correct route of cable. |
| 149 | Supply, Installation and Testing air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, BEE 5 Star rated expandable + Invertor (100% copper, 4 way swing, ice clean, Dust filter, colour in White. Including mounting stand for Outdoor Unit and Indoor Unit with Fastner and nuts, bolts, washer complete as as per site requirement.) complete all as specified and directed. |
| 150 | S&F voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation 170 V to 250 Volt with output stabilizer at 230 volt with accuracy of +/- 2.5% and of capacity 4 KVA complete all as specified and directed. |
| 151 | Surface excavation n.exc 30 cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 152 | Excavation in post holes or similar holes nexc 0.5 cum eachin soft/ loose soil , getting out returning filling in and ramming with earth or broken rubble around in layers not exc 25 cm watering etc and removing surplus soil to 50 m distance and making good surface complete all as specified and directed. |
| 153 | S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe-410-0 or Fe 310-O complete all as specified and directed. |
| 154 | M&L 100 mm thick PCC type B-1, (1:2:4) (using 40mm graded stone aggregate) Finished even & smooth without using extra cement complete all as specified and directed. |
| 155 | M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed complete all as specified and directed. |
| 156 | M&L 100 mm thick PCC type D-2, (1:4:8) (using 20mm graded stone aggregate) Finished even & smooth without using extra cement complete all as specified and directed. |
| 157 | S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick,with grey cement and pigments set, over 15 mm thick screed bed in cement mortar (1 : 6) jointed and pointed in cement mortar neat cement slurry in floors complete all as specified and directed. |
