|
| 1 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articalscomplete all as specified and directed. |
| 2 | M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 4 | M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as inleveling /sub base of flooringcomplete all as specified and directed. |
| 5 | M&L for Pre Polished Kota Stone 20 - 25 mm thick on risers of steps laid over 10 mm thick cement plaster in CM 1:4, fixed and jointed with grey cement slurry mixed with pigment to match complete all as specified and directed. |
| 6 | M&L for Pre Polished Kota Stone 20 - 25 mm thick laid over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match including rendering, moulding & polishing on exposed edges complete all as specified and directed. |
| 7 | Taking down cement plaster on wall including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 8 | M&L for 12mm thick ready to use cement based plaster (Ready Mix Plaster) with high quality polymer additive and well graded sand and fillers over wall of brick, stone or concrete including preparing the surfaces clean and made free from dirt, oil grease, concrete sealer or curing compound using a wire brush mopping . Dampen surface with clean water.Water to be mixed/preparation of mortar to be done as per manufacturer instruction complete all as specified and directed. |
| 9 | All as per item No. 8 above, but 5 mm thick on ceiling complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed. |
| 11 | Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall complete and applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed. |
| 12 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over and including a coat of primer over applying a coatofwall care putty on wallincluding rubbing with sand paperto achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 13 | M/L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying two coat of white wash on ceiling complete all as specified and directed. |
| 14 | Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall complete , applying a coat of 1mm thickwall care putty on wall including rubbing with sand paperto achieve a smooth surface and sharp straight edges etc. complete as per manufacturer\"s instructions and directed at site. Make- Birla / JK white and applying two coats of oil bound distemper (any colour) over a coat of primer complete all as specified and directed. |
| 15 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame)n. exc 1.5 sqm complete all as specified and directed. |
| 16 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm each complete all as specified and directed. |
| 17 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including S&F with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 19 | S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 20 | S&F 200 mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 21 | S&F 200mmstainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 22 | S&F 300 mmStainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 23 | S&F 75mm long aluminum anodised extruded typedoor stopper of double legged with rubber shoes in bottom complete all as specified and directed. |
| 24 | S&F for powder coated aluminium window and ventilator shutters incl frame, side hung type without sash bars, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long( 01 No), hinge type B-21 100mm long (02 Nos), 100mm long handle (02 Nos) and tower bolts 150 mm long (02 Nos) in each shutter complete all as specified and directed. (Glass panes shall be measured separately):-(a) Frame - 64 x 40 x 1.20 mmmain frame fixed to wall with screwed all as specified and directed by Engr-in-Charge.(b) Side rail- 40 x 18 x 1.0 mm, (c) Bottom rail - 40 x 18 x 1.09 mm (d) Top rail - 40 x 18 x 1.09 mm. |
| 25 | All as per item No. 24.00 above, but wire gauzed window, complete all as specified and directed. (Wire gauze shall be measured separately) complete all as specified and directed. |
| 26 | S&F 4 mm thick glass each panes fixed on aluminium door shutter with and including aluminium beading, rubber gasket etc. complete all as specified and directed. |
| 27 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 28 | Dismantling ofterracing tiles/brick tiles single layer on roof,laid bedded and pointed in any mortar complete all as specified and directed. |
| 29 | Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 30 | M&L for cement concrete type B0 (1:2:4 ) (using 12.5 mm graded stone aggregate) as in padding and coping, incl hunching, benching etc complete all as specified and directed. |
| 31 | M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 1.5 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqmand a geotextile of 40 GSM to be applied over first coat while first coat is still wet,complete as per manufacturer\"s instructions complete all as specified and directed.Note:- 1. The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer\"s gurantee. The amount of Rs. 40 ( Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor\"s final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. |
| 32 | Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete complete all as specified and directed. |
| 33 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path/ plinth protection finished the surfaces even & fair complete all as specified and directed. |
| 34 | Supply only liquid water proofing compound complete all as specified and directed. |
| 35 | M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat zink chrome red oxide primer complete all as specified and directed. |
| 36 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 37 | S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 38 | Dismantiling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusingnecessary form work & scaffolding up to Three storey complete andsurface of guniting to be finished fair and even with and including10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting,white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractoron this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separetly. |
| 39 | M&L for Mild steel TMTbar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed ) complete all as specified and directed. |
| 40 | M&L for welded steel wire fabric weight n exc 4 Kg/sqm complete all as specified and directed. |
| 41 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. |
| 42 | Point wiring for one light point/bell point/c fan/ Exhaust fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size 25mm dia with all fittings (ISI Marked) controlled by one switch including pressed steel terminal modular boxes & modular top cover of appropriate sizewith suitable size of modular plate with all accessories including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified and directed. |
| 43 | All as per item No 44.00 above but for one 3 pin 15 Amps socket outlet independentwith 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl PVC conduit complete all as specified and directed. |
| 44 | All as per item No 44.00 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed. |
| 45 | All as per item No 44.00 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed. |
| 46 | All as per item No 44.00 above but for one light point controlled by 2 nos two way switches complete all as specified and directed. |
| 47 | M&L forModular switch 1 way 6A,1 module240 volts complete all as specified and directed. |
| 48 | S&F switchModular switch 1 way 16A,1 module 230 Volts complete all as specified and directed. |
| 49 | M&L for Modular Socket,6A - 2/3 pin combined 2 module, 230 volts complete all as specified and directed. |
| 50 | M&L for Modular Socket6A/16A - 2/3 pin combined 2 module, 230 volts complete all as specified and directed. |
| 51 | M&L for Modular switch 2 way 6A, 1 module, 230 Volts complete all as specified and directed. |
| 52 | Supply and fixing in Fan step regulator, 120W - 2 module, Modular step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required complete all as specified and directed. |
| 53 | M&L in replacement forsubmain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 54 | All as per item No 55 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 32 mm dia complete all as specified and directed. |
| 55 | M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. |
| 56 | S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed. |
| 57 | S&F Emergency LED Lamp solution gets Automatically switched on during a power cut and runs effectively on 4 hours.power Factor more than 0.9, Protection Glass IP 20, bulbs 12 watt. Make - Orient / Philips etc complete all as specified and directed. |
| 58 | S&F in replacement of wall mounted LED light fittings 20/22 watt, 6500K, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified and directed. |
| 59 | S&F in replacement of LED mirror light fitting 10/12 Watt,2\" long, with efficient heat dissipation and integrated electronic driver complete connecting electrically,Housing Polycarbonate, IP 20,PF More than 0.9 complete all as specified and directed. |
| 60 | Supply and fix in replacement of High power LED wall security light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driverincl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as specified and directed. |
| 61 | S&F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitablefor MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, confirming to complete with one MCCB 3 pole 415 Volts 100 Amps, 4 pole rating with rupturing cap 26 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed. |
| 62 | Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 63 | M&L for MCB single pole 240 volts, B Curve& 6 to 32 amps, with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. |
| 64 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 65 | Disconnecting & taking down upto 1200 mm sweep ceiling fan anddeposited to MES store yard and Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified and directed.Note : (a)Make, Model & Colour of fan as approved by GE. (b)Writing MES No. in black synthetic enamel paint by the contractor.(c)T & P will be provided by the contractor for reaching any height of the ceiling. |
| 66 | M&L for Earthing complete with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion. |
| 67 | Disconnecting electrically and taking out old unserviceable LT UG cables any type of size up to 35 Sqmm 3.5 core complete all as specified and directed. |
| 68 | Supply and laying in trenches or fixing to wall/pole or passing through pipe PVC insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core complete all as specified and directed. |
| 69 | Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n\"exc. 1.5 m deep for HT under ground cable/pole fondationand getting out including forming bottom surface to required level or slop, complete all as specified and directed. |
| 70 | Returning filling including spreading leveling watering and well ramming in layers not exc 25Cmin soft/ loose soil, complete all as specified and directed. |
| 71 | Removing excavated material in soft/ loose soil n\"exc 50M and depositing where directed at a level n\"exc1.5M above the starting point, complete all as specified and directed. |
| 72 | M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed. |
| 73 | Supplying and laid flat sub class \"B\" bricks, old size, laid dry in trenches for the protection of U/G cable, complete all as specified and directed. |
