|
| 1 | De-Watering:-Suplying all materials, labours, T&P, 5.00 HP Diesel Pump set with POL, Pump Operator etc. and De-watering the clear water/muddy water etc. all complete as per the required specification and direction of Engineer in charge |
| 2 | De-Silting :- Supplying all materials labour T&P, Excavation of any available type of soil by mechanical means loading into and transportation by mechanical means and unloading the soil within the Pond Area on properly prepared and scientifically approved surface including spreading and levelling the earth in 22.5 cm layers to make ready for watering and compaction by mechanical means but excluding watering and compaction in dams and dykes for all heights including construction, maintenance, watering and lighting of haul road and borrow area etc. complete as per the required specification and direction of the Engineer-incharge. (measurement of the fill to be taken on the finished compacted section under OMC condition.) |
| 3 | Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transportation by mechanical means and unloading the soil within initial lead of 1km rehandling the earth from dumping yard to bank of pond & spreading on properly prepared and scientifically approved surface including spreading and levelling the earth in 22.5cm layers to make ready for watering in dams and dykes for all heights including construction maintenance watering and lighting of haul road and borrow area etc complete as per specification & direction of engineer in charges |
| 4 | Supplying all materials labour T&P, Watering earthwork upto OMC condition and compaction by Mechanical means in layars not exceeding 22.5Cm to 95% dray density including hire and running charges of all the Machineries complete as per the direction of EIC (AoR-2006, Page no-12, item No.2) |
| 5 | Supplying all materials , Labour, T&P and Fine dressing of earthwork in odinary or hard soil in road / Embankment formation including cost of cutting of filling earth upto 0.15m depth of surface etc all complete as per the required specifications and direction of Engineer in Charge (AoR-2006, Page no-7, item No.10) |
| 6 | Earthwork in excavation of foundation in Ordinary soil including levelling the bed and depositing excavated earth away from site with in 50m initial lead , 1.50m initial lift. Complete as per direction of E-I-C |
| 7 | Supplying ,Filling of sand in foundation and plinth base of road surface including cost of material with taxes , watering, ramming and labour required for the work etc.Complete as per direction of E-I-C. |
| 8 | P.C.C. work in (1:3:6) with 40mm size h.g.metal(CB), mixing with concrete mixture laying , compacting including cost of all material with taxes , watering, curing ,labour required for the work etc. Complete as per direction of E-I-C. |
| 9 | P.C.C. work in (1:2:4) with 12mm size crusher brocken h.g. chips mixing with concrete mixture laying , compacting including cost of all material with taxes , watering, curing labour required for the work etc but excluding centring, shuttering . Complete as per direction of E-I-C. |
| 10 | Providing ,laying, spreading and compacting of Stone screened Dust (passing through 2.36mm sieve and retained on 0.075mm sieve ) and compacting with smooth 3 wheeled steel roller-10 tonnes to achieve the desired density as per clause 406 of of MoSRT & H specifications for Road & Bridge works (4th Revision) including cost of all materials , T & P , hire and running charges of machinaries ,labour required for the work . Complete as per direction of E-I-C .Measurement will be taken on compacted surface only. |
| 11 | Providing and laying C.C M30 grade mix , heavy duty ,factory made hydrulically pressed and mechanically compacted pre cast interlocking tuff stone brand different coloured paver blocks 60 mm thick coral shaped preparation of sub base with 50mm sand and levelling and laying of interlocking paver block with sand binding and final compacting with plate vibrator finishing the surface including cutting of blocking at the edges with all labour, material with taxes. Complete as per direction of E-I-C |
| 12 | Providing rigid smooth centring and shuttering for C.C/R.C.C. works including false work and dismantling then after casting including cost of materials complete as per direction of E-I-C. |
| 13 | Supplying and fixing of pre cast kerb stone of size 300mm x 300mm x150mm of M30 grade of approved make, design ,colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.Complete as per direction of E-I-C |
| 14 | Rough stone dry packing in approns and revetments with hard granite stones (15cm to 30cm) including cost of material T & P and labour required for the work. Complete as per direction of E-I-C |
| 15 | Random rubble H.G. stone Masonry in cement mortar (1:6) in foundation and plinth.including cost of material T & P and labour required for the work. Complete as per direction of E-I-C |
| 16 | Providing and Laying (to level or slopes) and jointing with rubber rings pre-cast reinforced socket and spigot concrete pipes Class NP-3 of the following diameters conforming to IS:458 - 2003 suitable for rubber ring roll on joint of the following internal diameter as per specification complete. (Earthwork in trenches to be measured and paid for separately) as per the specification and direction of the Engineer-in -charge. |
| 17 | Supplying,fitting,fixing of Rubber ring for RCC Humepipe joint |
| 18 | Horticulture(Elephant Era,Canna Indica,wedelia,vetiver grass)-;Supplying all materials labour & T&P etc. For removing vegetation & making up undolation not exceeding 15cm in depth including disposal of rubbish,plantation of saplings a)Bougainvillea Glabra,Elephant Ears Plant,Canna Indica,wedelia Plantation, Vetiver grass spread across the area all comp. as per the specification & direction of Engineer in Charge. LS Qnty |
| 19 | supplying fitting fixing od cement concrete bench |
| 20 | Supply and fixing of 5 mtr pole shall have a weather proof pole junction/ looping/ terminal box clamped at 450mm from top of the pole.Project SPV to installed FRP pole junction box, in cluding clamps,bolts, G.I painting,glands, DIN rail terminals, insulation, locking arrangement for providing connection of incomer cable and outgoingwire, including foundation of pole to be provided with a suitable bus bar arrangement to loop 2 to 3 cables of size up to 25 sqmm, 6A MCB and bi-metallic connector to be provided in each junction box for supply to LED Luminaires.Bottom-100mmx600mm, Top- 50mmx2400mm. The base pleat size-250mmx250mmx12 mm with PYUbased etch primer & matt finish paint.MAKE:- |HAVELLS/PHILIPS/JAQUAR/CROMPTON /BAJAJ or equivalent. |
| 21 | (40-45) W LED park show light with |P65, Rated -22OV,50Hz, PF>0.9,0D of pole top for housing LED lantern should be 55 to 60mm with 40- 45watt light and LED post top lantern made in Die cast aluminium housing with Acrylic clear diffuser for out door garden lighting.40-45watt warm white colour (300OK+-300K), IP 65 or better, with suitable constant current electronic drives with operating voltage of 160V to 260V. Surge rotection>4KV. Fixture should be suitable for 60mm OD pipe entry with fixing MAKE:- bolts.HAVELLS/PHILIPS/JAQUAR/CROMPTON /BAJAJ or equivalent. |
| 22 | Supply & laying of 6 sq mm x 4 core Aluminium aromoured cable.(MAKE: HAVELLS/POLLYCAB/UNIVERSAL/FINOLEX or equivalent) |
| 23 | Supply & Laying of 50 mm Dia, ISI Marked PVC/HDPE Conduit pipe suitable for UG cable laying. |
| 24 | Laying of one number of PVC insulated and PVC seathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the |trench etc. as required. |
| 25 | Feeder Panel along with input output switchgears, metering, switchs, contactors,fuses, auto transformer coils etc. should be reputed manufactures like Simens/ABB/ Schneider/GE/ TAS etc and norms as applicable in IS 8623 for LV switchgear and control assemblies, IEC:60947-1 & 4/ IS: 13947-1 & 4, IS 8828: 1996/ IEC 60898- 2002, IEC 60947-3 and other relevent standards. Please Enable Macros to View BoQ information |
