|
| 1 | Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finised with a floting coat fof neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. |
| 4 | 40mm thick with 20mm nominal size stone aggregate. |
| 5 | Providing wood work in frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 6 | Local best quality Tolhao wood |
| 7 | Providing and fixing panelled or panelled and glazed shutter for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws,excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 8 | Local best quality Tolhao wood. 35 mm thick shutters |
| 9 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. Metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : |
| 10 | With cement mortar 1:4 (1 cement: 4 coarse sand) |
| 11 | Prpviding corrugated G.S. Sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. Limpet washers or with G.I. Limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 12 | 0.63 mm thick with zinc coating not less than 275gm/sqm |
| 13 | Providing ridges or hips of width 60 cm over all width plain G.S. Sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. Limpet and bitumen washers complete. |
| 14 | 0.63mm thick with zinc coating not less than 275gm/m2 |
| 15 | Providing and fixing precoated galvanised steel sheet roffing accessories, Zink coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on bod side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or GI seat bolts and nuts, G.I. plain and bitumen washers complete : |
| 16 | Gutter (600 mm over all girth) Precoated galvanised iron profile sheets 0.40 mm thick |
| 17 | Providing wood work in frames of false celing, partition etc, sawn and put up in position : |
| 18 | Local best quality Tolhao wood. |
| 19 | Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087 finished with a coat of aluminum primer on both sides & edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised alluminium (with 15 micron anodic coating) T-sections 35 x 15 x 1.5 mm size main runners and cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats. |
| 20 | Extra for providing 3mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plan/or with design particle board ceiling tiles in item above |
| 21 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 23 | New work (two or more coats) over and including priming coats with cement primer |
| 24 | Finishing walls with textured exterior paint of required shde : |
| 25 | New work (Two or more coats applied @ 3.28 Lts/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 27 | One or more coats on old work |
| 28 | Providing and fixing M.S. Sliding bolts bright finished or black enamelled with nuts & screws etc. Complete. |
| 29 | 250 x 16 mm |
| 30 | Providing and fixing ISI marked oxidised M.S. Tower bolt black finish, (Barrel type) with necessary screws etc. Complete : |
| 31 | 100x10 mm |
| 32 | 200x10 mm |
| 33 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainlesssteel screws etc. Complete : |
| 34 | i)125x64x2.50 mm |
| 35 | ii) 100x60x2.50 mm |
| 36 | iii)75x50x2.50 mm |
| 37 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete : |
| 38 | 125 mm |
| 39 | 100 mm |
| 40 | Dismantling W.C. Pan of all sizes including disposal of dismanntled materials i/c malba all complete as per direction of Engineer-in-Charge. |
| 41 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete |
| 42 | 10 litre (full flush) capacity- white |
| 43 | Providing and fixing solid plastic seat with lid for pedestal type W.C. Pan complete |
| 44 | White solid plastic seat with lid |
| 45 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 46 | Flat back wash basin of size 550x400 mm |
| 47 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 48 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 49 | Providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. Brass screws and washers complete. |
| 50 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 51 | Providing and fixing C.P. Brass bib cock of approved quality conforming to IS:8931 |
| 52 | 15 mm nominal bore |
| 53 | Providing and fixing C.P. Brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 |
| 54 | 15 mm nominal bore |
| 55 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 56 | Renewing glass panes,with putty and nails wherever necessary: |
| 57 | Float glass panes of thickness 4 mm |
| 58 | Providing and fixing PTMT pillar cock of approved quality and colour. |
| 59 | 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms |
| 60 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 61 | Internal work - Exposed on wall |
| 62 | 21 mm nominal outer dia Pipes |
