|
| 1 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading, or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches leveling, dressing and ramming the bottom boiling out water as per required complete. a) Depth of excavation not exceeding 1.5 mtrs |
| 2 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water and ramming complete including the cost of supply of sand. By. Find Sand( payment to be made on measurement of finished quantity) |
| 3 | Single brick flat soling of picked Jhama bricks including ramming and dressing but to proper level and filling soils with local sand. |
| 4 | Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor (A) [Pakur Variety] a) 1:3:6 proportion |
| 5 | Earth work in filling in foundation in plinth with good earth in layer not exceeding 150 mm including watering and ramming etc layer by layer complete (payment to be made on the basis of measurement of finished.a) With earth obtained from excavation of foundation. |
| 6 | Brick work with first class bricks in cement mortar (6:1) a) infoundation & Plinth. |
| 7 | 125 mm thick Brick work with 1 st class Bricks in Cement mortar(1:4 ) in Ground Floor |
| 8 | Plaster (to wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougehning of concrete surface including throating, nosing and drip course where necessary (ground floor) i) With 1:6 cement mortar a)15 mm th. plaster |
| 9 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 10 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.Pakur variety |
| 11 | Artificial stone in floor, dado, staircase etc with cemen concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 20 mm. thick |
| 12 | 80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. [Note: Subgrade CBR shouldnot be less than 5]Colour DecorativeRef : – PWD Bld. schedule Page – 286 item 8 & 3rd corrigenda |
| 13 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 14 | (A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m i) Other than Coloured decorative including white |
| 15 | (B) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white |
| 16 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars strriups binders etc initials straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape placing in proper position and binding with 16 guage black annealed wire at every intersection complete as per drawing and direction of EIC. For works in foundation ,basement upto roof of G. Floor upto 4.0 m. ( tor steel/ mild steel) I) JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL) |
| 17 | Hire & labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting fixing and striking out after completion of works(upto roof of G.Floor) a)25 to 30 mm shuttering with staging as per direction of EIC. |
| 18 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement ifany, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 19 | Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 20 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(i) 630 mm X 450 mm size.PWD SOR S & P -2017, It- A- V ,3, P- 41 |
| 21 | Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets. (b) Laboratory sink with rim and overflow.(ii) 500 mm X 300 mm X 150 mmPWD SOR S & P -2017, It- A- V ,5, P- 42 |
| 22 | (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 23 | Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 24 | Earth work in filling in compound , tank , low land ditches etc with good earth in layers not exceding 150 mm including breaking clods and consolidating the same by ramming & dressing complete (Payment will be made on profile measurement before & after the work). With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth. |
| 25 | MS or WI ornamental grill of approved design joints continuously welded with MS , WI flats and bars for windows, railing etc fitted and fixed with necessary screws and lugs in ground floor.Grill weights above 16 Kg /Sqm &Above |
| 26 | M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m |
| 27 | Priming 1 ( one ) coat on steel or other metal surface with synthetic oil bound primer of approved quality , including smoothning surfaces by sand papering etc |
| 28 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of a approved putty etc on the surface if necessarya) On steel or other metal surface with super gloss(Hi-gloss)i) Two coats (with any shade except white) |
| 29 | Welding in M.S. structural work with gas or electric.a) Continuous weld. |
| 30 | Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc. ( Payment to be made on area of cut surface) |
| 31 | Supply of E.R.W.M.S. black pipe of approved make(heavy quality) as per standard specification having wall thickness not less than 8 mm.i) 600 mm dia. (internal) |
| 32 | For supplying & delivery of RCC Spun Pipe as per IS : 458/2003 NP-3 ( Pushing 600 mm dia RCC Hume Pipe ,Payment will be made on actual length of pushing Hume pipe at site)a)300 mm dia. (40 mm th.) NP-3 |
| 33 | 18% GST (9% State+Central 9%) Rs |
| 34 | 1% WBWF Cess (0.99% for Saving +0.01% Reserve) Rs Please Enable Macros to View BoQ information |
