Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-03-2026 | Amendment in critical date | Date | 31-03-2026 |
| 2 | 02-03-2026 | Amendment in critical dates | Date | 24-03-2026 |
| 3 | 02-03-2026 | Amendment in critical dates | Date | 24-03-2026 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM in 1:4 finished even and fair andmixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid) on external surface, complete all as specified and directed. |
| 3 | Supply only Integral crystalline water proofing admixture of approved make, complete all as specified and directed. |
| 4 | M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling, finished even & fair, complete all as specified and directed. |
| 5 | M&L for rendering 10 mm thick in CM (1:6) other than fair facesof Brick work or stone surface finished even and fair on internal surfaces of wall, complete all as specified and directed. |
| 6 | M&L for Complete removal of existing treatment on exterior surface of wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour, complete all as specified and directed. |
| 7 | M&L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs) diluted with water as per manufacturer instruction appliedwith fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max materialhose length of 30 m. The spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform complete all as specified and directed. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.Mame of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in list of make.Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE.The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defectlibality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same. |
| 8 | M&L for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed.Mame of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in appx B |
| 9 | M&L for scrapping with wire brush/sanding paper and preparation of surface to make surface clean, free from dust, loose paint etc all as specified and directed |
| 10 | M&L for preparation of new or old plastered surface and applying two coats of oil bound distemper on walls incl 1 mm thick wall care putty, complete all as specified and directed. |
| 11 | M&L for preparation of new or old plastered surface and applying Synthetic enamel Painton walls over a coat of 1 mm thick wall care putty in Common areas/Corridors complete all as specified and directed. |
| 12 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame).(Ventilator and Window) complete all as specified and directed. |
| 13 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame).(Doors and Window) complete all as specified and directed. |
| 14 | S&F Pressed steel frame 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed, including preparation of new primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed |
| 15 | S&F Pressed steel frame 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed, including preparation of new primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed |
| 16 | M&L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate for back filling in door frames, complete all as specified and directed. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note : (i) The WPC shall comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms). (ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws.(iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant.(iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster\"s. |
| 18 | S&F 30 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 19 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flushdoor shutter of size35mm thick comprising of virginpolymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 20 | S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engr-in-charge.Note-Stainless steel wire mesh shall be measured and paid separately. |
| 21 | Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 22 | Providing and fixing factory-made uPVC white colour casement (openable) window suitable for openings up to 1.00 sqm, made from extruded uPVC profiles of wall thickness 2.3 mm (±0.2 mm). The window shall consist of multi-chambered hollow profiles as follows: frame section 60 mm × 58 mm, sash section 60 mm × 73 mm, T-profile section 60 mm × 74 mm (used between two shutters), and glazing bead 35 mm × 20 mm. All members shall be mitre cut and fusion welded at corners. Work includes drilling for hardware, provision for drainage, and fixing of all accessories. EPDM gasket of 1.2 mm (±0.2 mm) thickness shall be provided. Galvanised steel reinforcement shall be inserted as follows: frame 28 mm × 21.5 mm, sash 31 mm × 27.5 mm, and T-profile 27 mm × 17 mm. Frame shall be fixed to wall using 8 mm × 100 mm long anchor fasteners. Hardware shall include casement handles (zinc alloy, white powder-coated), butt hinges (zinc alloy, white powder-coated), and multipoint locking system with transmission gear of mild steel. Window shall accommodate 5 mm thick glass of approved make. |
| 23 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes costof glass and includes all other connected accessoriesNet opening will be measured for payment purpose.) |
| 24 | S&FStainless steel wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or SS wire staples complete all as specified and directed. |
| 25 | S&F 5.5 mm thick plain sheet glass as in,shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 26 | S&F 5.5 mm thick Frosted sheet glass as in,shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 27 | Providing and applying approved quality weatherproof silicone sealant around the perimeter of UPVC window frames (internal and external sides) to seal the gap between frame and masonry/plaster surface, including surface preparation, masking, and cleaning, complete in all respects as directed by Engineer-in-Charge. |
| 28 | S&F 100mm SS handles, Complete all as specified and directed. |
| 29 | S&F 150mm SS handles, Complete all as specified and directed. |
| 30 | S&F 100mm SS barrel tower bolts fixed as specified and directed. |
| 31 | S&F 200mm SS barrel tower bolts fixed as specified and directed. |
| 32 | S&F 300 mm SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet fixed as specified and directed. |
| 33 | S&F 100 mm long SS butt hinges, complete all as specified and directed |
| 34 | S&F 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 35 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm complete all as specified and directed |
| 36 | Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and directed |
| 37 | Providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powcler/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being Termite/borer proof, water/moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel hinges shall be paid separately) |
| 38 | Providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer composite) solid plain white colour board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In-Charge. |
| 39 | S&F continuous (piano) hinges, Stainless steel of width 30 mm complete all as specified and directed. |
| 40 | S&F 150 mm Hasp and staple, Stainless steel,including bolt to hinge plate and fixed with screwscomplete all as specified and directed. |
| 41 | S&F magnetic catchesfor cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved samaple by Engr-IN-Charge complete all as specified and directed. |
| 42 | S&F Stainless Steel 150 mm dia oval shape handle fancy type brass polished bright finish complete all as specified and directed |
| 43 | M&L 40 mm brassdia cuboard knobs fixed withnuts ,screws and washers of mild steel, bright finished complete all as specified and directed. |
| 44 | Dismantling wrought Iron or mild steel workofany description not other wise described complete all as specified and directed. |
| 45 | S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including painting with zinc chrome primer and two coats of synthetic enamel paint complete all as specified and directed. |
| 46 | S&F in repair fancy type drapery rod 20 mm dia stainless steel incl end brackets and sidebrackets, complete all as specified and directed. |
| 47 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 48 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 49 | Excavating over areas, n exc1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 50 | Returning,filling in including spreading ,leveling ,waterring and well ramming in layers not exc 25cm with excavated soil complete all as specified and directed. |
| 51 | Removingexcavated material/soil to a distance n .exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. |
| 52 | M&L for Cement concrete, (1:4:8) type D2 (using40mm graded crushed stone aggregate)as in foundations fillings and mass concrete complete all as specified and directed. |
| 53 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking beinding spirally hopping and binding wisth and dincluding mild steel wire (annelid not less than 0.9mm dia) complete all as specified and directed. |
| 54 | M&L for mild steel TMT bars 5 to 10 mm dia and over cut to length, bent to shape required, including cranking beinding spirally hopping and binding wisth and dincluding mild steel wire (annelid not less than 0.9mm dia) as in stirrups etc., complete all as specified and directed. |
| 55 | S&F Formwork to sides for fair finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 56 | S&F Formwork to side for fair finished surface of concrete of pillars, posts, struts, piers, coloums and stanchions complete all as specified and directed. |
| 57 | M&L for Reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded crushed stone aggregate) using in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 58 | M&L Reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded crushed stone aggregate) as incolumns,pillars, piers, posts and struts etc., complete all as specified and directed. |
| 59 | S&F Roof trusses (framed), trussed, purlins,crane grantries, pillars, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, Hollowor flat sections)including distance pieces,cleats etc.Fe 410-W (Gde-E-250) quality-A and applying two coats of synthetic enamel paints over and incl a coat of red oxide/pink primerall as specified and directed.. |
| 60 | S&F Mild steel screw bolts diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed. |
| 61 | M&L for PCC (1:3:6) type C1 (20 mm graded crushed stone aggregates) as in roof kerbs, slopingpadding in roof slab or mud stops, rounded or chamfered on edges including SBR polymer as per manufacturer\"s instructions all around periphery of the wall INCLUDING NECSSARYDEMOLATION OF PCC complete all as specified and directed. |
| 62 | M&L cement concretetype-B-1, 1:2:4 using 12.5 mm graded stone aggregate as in Bed blocks, copings, etc incl necessary formwork complete all as specified and as directed. |
| 63 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 64 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes including dismantling of exsitingtiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed. |
| 65 | M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding incl 10mm thick plaster in cm 1:4 including dismantling of exsitingtiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed. |
| 66 | M&L for treatment to sunken floor and sides, complete as specified hereafter:-(a)Cleaning & Surface Preparation: – Demolition and removal of existing PCC, lime concrete, muddy soil, and any previous treatment from sides and base slab, including sand blasting with compressed air for thorough cleaning. All debris to be removed and disposed of outside Defence land at contractor’s own expense.(b)Waterproof Coating :- Applying a base coat of glass fibre reinforced acrylic modified cementitious coating system (Sika Top Seal-107 @ 1.50 Kg/Sqm with glass fibre reinforcement Sika Fab-I) followed by a top coat of Sika Seal-107 @ 1.50 Kg/Sqm, or equivalent make (Forsoc / Pidilite).(c)Plastering:-Providing and laying 15 mm thick cement plaster in CM 1:3 over sides and base slab of sunken portion, mixed with integral waterproofing compound (Sika Plastocrete Plus or equivalent) as per manufacturer’s instructions.(d) Bituminous Coating:- Applying tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm evenly on plastered surfaces of sides and base.(e)Spout Pipe:- Supplying and fixing 25 mm bore CPVC pipe spout from inside of sunken portion extended minimum 150 mm beyond external face of wall, complete. Note:- Floor area to be measured and paid only. |
| 67 | M&L for Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken portion of slab complete all as specified and directed. |
| 68 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) |
| 69 | S&F 110 mm boreUPVC (SWR) pipes Type A conforming to IS 13592single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified. |
| 70 | S&F 75 mm dia UPVC (SWR)pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified and directed. |
| 71 | S&F 75 mm dia UPVC (SWR) pipes TYPE -B Conforming to IS 13592 single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 72 | S&F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floorsincluding all type earth work complete all as specified. |
| 73 | S&F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, fixed on wallscomplete all as specified. |
| 74 | S&F 110 mm dia UPVC (SWR) bends any radius with oval access door complete all as specified. |
| 75 | S&F 75 mm dia UPVC (SWR) bends any radius complete all as specified. |
| 76 | S&F 110 mm dia UPVC (SWR) branch piece, (double Y) equal or unequal complete all as specified. |
| 77 | S&F 75 mm dia UPVC (SWR) branch piece, (double Y) equal or unequal complete all as specified. |
| 78 | S&F 75 mm dia UPVC (SWR) bends with access door any radius complete all as specified. |
| 79 | S&F 110 mm dia UPVC (SWR) plain bends any radius complete all as specifiedand directed. |
| 80 | S&F 75 mm dia UPVC floor trap plain with grating including jointing with solvent cement complete all as specified. |
| 81 | M&L for Mild steel work in brackets, clamps, flat iron supports, holdfasts etc., fabricated from MS flat/round/angle sections, including cutting, bending, drilling, welding, and fixing in position to hold rainwater pipes against wall, with necessary bolts, nuts, washers, and painting two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 82 | M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for concealed for water tubing or concealed condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed |
| 83 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed. |
| 84 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed. |
| 85 | S&F PP-R pipe 20 mm bore outer dia, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge.The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete in all respects. |
| 86 | S&F PP-R pipe 25 mm bore outer dia, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge.The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete in all respects. |
| 87 | S&F PP-R Gate valves (brass insert) as per requirement of the site outer dia 20 mm complete all as specified and directed. |
| 88 | S&F PP-R Gate valves (brass insert) as per requirement of the site outer dia 25 mm complete all as specified and directed. |
| 89 | S&F in repair 15 mm size bib tapscast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.Make : Jaquar Cat Part No OPP-CHR-15037PM or Equivalent Cat Part of make specified in list of make. |
| 90 | S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.Make : Jaquar Cat Part No OPP-SSF-15053PM or equivalent Cat Part of make specified in list of make. |
| 91 | S&F in repairs angle cock, 2 way, with wall flange 15 mm dia complete all as specified and directed. |
| 92 | S&F in repaircentral hole basin mixer for WHB cast copper alloywith capstin heads chromimium platedfancy type screweddown high pressure with or without lettered hot or coldwith long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.Make : Jaquar Cat Part No CQT-CHR-23167B or Equivalent Cat Part of make specified in list of make. |
| 93 | S&Fin repairs Health faucet (Hand shower) with 1 metre flexible tube with wall hook, Chromium Plated asspecified and as directed by the Engineer-in-Charge. Make : Jaquar Cat Part No ALD-CHR-573 or Equivalent Cat Part of make specified in list of make. |
| 94 | S&F Overhead Rain shower SS 100 mm dia (4\") with 200 mm (8\") long shower arm and wall flange complete all as specified and directed.Make: CERA model no F7020109SS or equivalent Cat Part of make specified in list of make. |
| 95 | S&F in repairlooking mirror of size 600 x 450 mm, selected quality5 mm thick including aluminium frame, mounted on 6 mm thick commercial plywood and fixed to wall with wooden plug & chromium plated brass screws complete all as specified and directed. |
| 96 | S&F in repair 15 mm bore stop valve fancy type brass chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make : Jaquar Cat Part No ALI-CHR-85083K or Equivalent Cat Part of make specified in list of make. |
| 97 | S&F in Single Towel Rail 600mm Long, Stainless Steel including brackets fixed to wall stainless steel screws, complete all as specified and directed. Make: Jaquar Model No ACN-CHR-1111SM or equivalent Cat Part of make specified in list of make. |
| 98 | S&F in repair SS soap dish complete all as specified and directed. Make Jaquar ACN-SSF-1131N or Equivalent Cat Part of make specified in list of make. |
| 99 | S&F in repair vitreous china wash hand basin with pedestal pattern, white, flat back, size 550 x 400 mm, excluding taps, waste chain and plug, but including bracket, 32 mm waste coupling, andUPVC waste pipe of 40 mm dia laid up to 1000 mm, fixed in repair, complete all as specified and directed by Engineer-in-Charge.Make: Jaquar model no CNS-WHT-301 or equivalent Cat Part of make specified in list of make. |
| 100 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.Make: Prayag/Polytuf/Pearl. |
| 101 | S&F glass shelf matt finished chromium plated (MCH/Colour CP)600 mm Glass Shelf - (Chrome, Wall Mounted) bracket and fittings all as specifid and directed. Make Jaquar Continental ACN-CHR-1171N/ Grohe/Kohler |
| 102 | S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 103 | Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed. |
| 104 | Demolition of brick work built in cement mortar including all quoins arches, pillars etc., complete all as specified and directed. |
| 105 | M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified. |
| 106 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 107 | M&L for Baroda green marble 14 to 16mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 108 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed. |
| 109 | M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in manhole covers etc. all as specified and directed by Engineer-in-Charge. |
| 110 | S&F in repairs, sinks with drainage board made of stainless steel 1.0 mm thick SS 304 grade (kitchen or laboratory type), with plugs, washers and wastes; including bedding in cement mortar into dwarf wall or fixing with cantilever brackets and connecting union to pipe. Also including provision and fixing of uPVC waste pipe of 40 mm nominal bore, length up to 1000 mm, with uPVC bottle trap, all jointed and connected in position, Overall Dimension 1016 x 508 x 204 mm, Make: New Coral of Parryware/ Platino of Hindware/ equivalent in Jaquar |
| 111 | S&F Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified and directed.Make Jaquar Model No CQT-CHR-23309 or equivalent Cat Part of make as specified in list of make. |
| 112 | S&FStailness steel plate rack of size 910mm x 780mm x 250mm (31\"\" x 36 \" 10\") with separators and 3 tier shelves, provisionsing of hook 9 Nos made out of stailness steel sheet of grade AI SI 304 and fixed in repairs all as specified and directed. |
| 113 | S&F corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP ) with bracket and fittings complete all as specified and directed. MakeWPT6010A1 of parryware or equivalent in Hindware/Cera |
| 114 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:4) complete all as specified and as directed. |
| 115 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed |
| 116 | Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation or for shafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out any type of soil all specified and directed. |
| 117 | Supply, laying, jointing and testing in trenches DWCPE (SN 8) nominal size 175 (ID)/200(OD) dia as per IS-16098 (Part-2): 2013 including all items and activities required to make sewer line functional complete all as specified and as directed. Make supreme/prince/finolex |
| 118 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone agg as in surface channel or benching including finishing the top of benching or for kerb/gola and edging even and smooth using extra cement (Forming fair finished channel shall be measured separately). |
| 119 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed. |
| 120 | M&L for 1st quality non skid coloured Heavy duty tiles of size 400mmx400mm, 12 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) AND 25mm thick levelling corse ofpcc 1:2:4 using 12.5 mm crushed stone aggregatecomplete all as specified and directed. |
| 121 | M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even and fair complete all as specified and directed. |
| 122 | M&L for Baroda green marble work (table rubbed and polished) asin flooring, 16-18 mm thick laid over and including 20mm screed bedding in cement mortar (1:4), including pointing in white cement (1:2) using dust with admixtures completeall as specified and as directed. |
| 123 | M&L for Baroda green marble work (table rubbed and polished) asin steps, stairs, jambs, pillars, window cills, cooking platforms and like, 16-18 mm thick laid over and including 20mm screed bedding in cement mortar (1:4), including pointing in white cement (1:2) using dust with admixtures completeall as specified and as directed. |
| 124 | Supplying and fixing polished black granite inauguration plate of size 600mm x 900mm x 18-20mm thick, with machine-cut edges, mirror finish, and engraving of text/logo as per approved design including gold paint filling in letters, fixing with stainless steel clamps and necessary adhesive, complete as directed by Engineer-in-Charge. |
| 125 | Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors, etc. |
| 126 | M&L for point wiring light/fan/bell point with PVC insulated FRLS unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including PVC conduit medium grade not less than 20 mm dia, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling alongwith 1.5 sqmm stranded PVC insulated FRLS unsheathed copper conductor(Green in color) as earth wire and connected to common earth dolly for the following incl making good to surface with CM(1:4) plaster and paint to matchthe surface complete incl provn of CI/pressed steel terminal switch boxand 6mm thick Phenolic laminated top sheet cover and fixed with brass screws cup washerfor fixing switches/socket/regulators etc complete all as specified and directed for the following:-One light/fan point |
| 127 | All as per item No. 126 above but for one light point two way |
| 128 | All as per item No. 126 above but for one bell point on independent board controlled by one 5 Amps bell switch. |
| 129 | All as per item No. 126 above but for One 5 pin 5 amps socket outlet on same board with cables of size 2.5 sqmm |
| 130 | All as per item No. 126 above but for One 5 pin 5 amps socket outlet on independent board with cables of size 2.5 sqmm |
| 131 | All as per item No. 126 above but for One 6 pin 15/16 amps socket outlet on independent board with cables of size 2.5 sqmm |
| 132 | All as per item No. 126 above but for one 6 pin 15/16 upto socket outlet on independent board with cables of size 4 sqmm(geyser point) complete. |
| 133 | S&F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed. |
| 134 | S&F Switch Piano Flush button single pole two way 5 Amp complete all as specified and directed. |
| 135 | S&F Bell Push Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed |
| 136 | S&F socket outletflush type 3/5 pin 5/6 Amps 230V AC all as specified and directed. |
| 137 | S&F switch piano flush single pole one way 15/16 Amps complete all as specified and directed. |
| 138 | S&F socket outletflush type 5/6 pin15/16 Amps 230V AC all as specified and directed. |
| 139 | M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 140 | S&F stepped type electronic fan regulator flush type complete all as specified and directed. |
| 141 | S&F calling bell ding dong AC 230 volts single pole complete all as specified and directed. |
| 142 | S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings incl 10W LED Bulb complete all as specified and directed. |
| 143 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 144 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 145 | Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 146 | Supply and fixing wall bracket light fancy type suitable for B-22 base holder incl 10W LED bulb complete all as specified and directed. |
| 147 | S&F MCB DB SPN 8 way with 200 amps 240 volts rated copper busbarin sheet steel enclosure.double door type complete all as specified and directed. |
| 148 | Supply & fixing MCB , SP, AC, 240 volts of 06 to 32Amps capacity 10KA, \"C\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 149 | Supply & fixing MCB, SPN, AC, 240 volts of 6-32 Amps capacity 10KA, \"B\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 150 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.Note:- The contractor shall deposit the existing fan to store yard of AGE E/M old cantt. Quoted rates shall deemed to be included for taking down and transportation of the fans |
| 151 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with min 2 year manufacturers warranty complete |
| 152 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 153 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, 250 mm sweep complete all as specified and directed. |
| 154 | Supply and fix electric water heater, storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection (02 Nos) etc., complete all as specified and directed.Note:-The contractor shall deposit the existing geyser to store yard of AGE E/M old cantt |
| 155 | Supply and fixing LED bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with & including connection with suitable size of copper wire, complete all as specified and directed. |
| 156 | Disconnecting and taking out old unserviceable submain wiring any type and S&F sub main wiring with two single core PVC insulated,unsheathed, multistranded copper conductor cable 6 Sqmm with one single core 6 Sqmm PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit(HMS), duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point complete all as specified & directed.Note:- 2 run of submain wiring + 01 run of earth wire and 1 run of conduite shall be considered as one unit length. |
| 157 | Supply, laying,testingXLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core complete all as specified & directed. |
| 158 | M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed.Note :Punned thickness only shall be measured. |
| 159 | Supply and laying dry well burnt locally available brick sub class\"B\" modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed . |
| 160 | S&F 50 mm dia Galvanised steel tubing light grade with all necessary fittings laid in trenches, fixed to walls, poles, under road/ floor etc for cable protection, complete all as specified and directed. |
| 161 | Supply, fixing and testing of LT panel board indoor type made out of 2mm thick MS sheet of suitable size duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, wall mounted/ semi grouted in wall with locking arrangement and provision of tapping for incoming and outgoing electric connections with suitable size of lugs complete all as specified and directed comprising of the following (i) Copper bus bar chamber TPN of 200 amps rating (Set of four strip). (ii) Phase indicating lamp Set of three. (iii) Voltmeter (0-500V), three phase, digital type with inbuilt selector switch-01 set (iv) Ammeter (0-300 Amps) three phase, digital type with inbuilt selector switch incl CT\"s - 01 set(v) MCCB four pole 415 volts AC 50 Hz, 160 amps rating breaking capacity 25 KA fixed magnetic and adjustable thermal release - 01 No. (vi) MCB SPN 240 volts AC 50 Hz, 32 amps rating - 06 Nos(vii) fixing and connection of existing energy meter - 06 Nos(viii) Name slip holder on each compartment for identification of Accn - 07 Nos(ix) Earthing terminals - 02 Nos(x)MCB SPN 20A 10 KA B series - 01 No |
| 162 | Supply, fixing and testing of LT panel board indoor type made out of 2mm thick MS sheet of suitable size duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, wall mounted/ semi grouted in wall with locking arrangement and provision of tapping for incoming and outgoing electric connections with suitable size of lugs complete all as specified and directed comprising of the following (i) Copper bus bar chamber TPN of 150 amps rating (Set of four strip). (ii) Phase indicating lamp Set of three. (iii) Voltmeter (0-500V), three phase, digital type with inbuilt selector switch-01 set (iv) Ammeter (0-300 Amps) three phase, digital type with inbuilt selector switch incl CT\"s - 01 set(v) MCCB four pole 415 volts AC 50 Hz, 100 amps rating breaking capacity 25 KA fixed magnetic and adjustable thermal release - 01 No. (vi) MCB SPN 240 volts AC 50 Hz, 32 amps rating - 04 Nos(vii) fixing and connection of existing energy meter - 04 Nos(viii) Name slip holder on each compartment for identification of Accn - 05 Nos(ix) Earthing terminals - 02 Nos(x)MCB SPN 20A 10 KA B series - 01 No |
| 163 | M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plateone end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
