Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling plain orcorrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding and other neccessary T&P etc., Adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 2 | S&F pre-painted galvalume aluminum zinc coating (minimum 150gsm) GI based steel sheet of approved profile of corrugation, 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding etc, adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 3 | S&F pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of plain sheet, 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding etc, adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 4 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). incl ncessary scafoldingand other safety arrangement for heightup to 20mtr complete all as specified and directed. |
| 5 | S&FPlain, galvanised, mild steel sheeting of thickness 1mm as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and joints are welded or soldered complete all as specified and directed .Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding and other neccessary T&P etc. Adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed..Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding and other neccessary T&P etc. Adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 7 | Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section ,in any position in any position with nails etc complete all as specified and directed. Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding and other neccessary T&P etc. Adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 8 | Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, battens etc under 40 sqcm in sectionin any position with nails etc complete all as specified and directed. Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding and other neccessary T&P etc. Adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 9 | S&F rooftrusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W (Gde-E- 250), quality-A etc complete for fixing roof sheets/ claddings and other similar works as per requirement complete all as specified and directed.Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding and other neccessary T&P etc. Adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 10 | S&F framed work such as grills, gratings, etc., incl for ornamental and intricate design with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railing, framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed.Note: The work is required to be carried out in upto 20m height, contractor will make arrangement for scaffolding and other necessary T&P etc. Adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 11 | M&L for Second class hard-wood wrought timber as in scantlings as in struts, tie beams, rafters, etc., framed and fixed complete all as specified and directed. |
| 12 | M&L for Second class hard-wood clean sawn Battens for tiles of sectional area exc 15 but nexc 25Sqcm at 150mm centere to centre fixed complete all as specified and directed. |
| 13 | S&F in repair 30mm thick Hardwood 2nd class as inboarding in floors and skirting planed one side with butt joints and fixed with nails /screws in existing floors incl cutting out, piecing, heading joints etc. incl polishing complete all as specified and directed. |
| 14 | M&L for preparation of new wooden surfaces by sanding to remove any imperfections and applying wood primer to seal the surface, followed by applying evenlyfirst coat of Melamine paint as per manufacturers instructions and let it dry for 30mins. Lightly sand the surface with fine-grit sandpaper to smooth out any bubbles or unevenness. Apply a second coat of melamine polish and let it dry completely all as specified and directed. |
| 15 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth over one coat of red oxide, zinc chrome, complete all as specified and directed. |
| 16 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and removing from site, complete all as specified and directed. |
| 17 | All as per Srl item No 16.00 above but exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed . |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 19 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length , complete all as specified and directed.Note: i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints for doors, windows and other frames, complete all as specified and directed. |
| 21 | S&F35 mm thick second class hard wood,glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beeds for securing glass etc, supplied and fitted to chowkhats, complete all as specified and directed. |
| 22 | S&F 30mm flush shutters, solid core construction, with block board core and plywood face panells, commercial types on both sidesincl teak wood beading alround the shutters and both face is covered with decorative face veneer with lipping/ frame to match complete all as specified and directed. |
| 23 | S&F 100 mm sizebutt hinges, medium weight , coldrolled, mild steel and fixed, complete all as specified and directed. |
| 24 | S&F aluminium anodised barrel tower bolt 200mm long extruded section, complete all as specified and directed. |
| 25 | S&F 150mm size extruded aluminium handles fabricated type anodised, complete all as specified and directed. |
| 26 | S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long, complete all as specified and directed. |
| 27 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) or openable type/ casement windows upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.Note: i) Glass or wiremesh shall be paid separately.ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 28 | S&F factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow sectionwith multi chamber, Frame (60mm x 62mm). sash (42x67mm). Sliding Interlock (One vertical length in each shutters) (45.5x28mm). Glazing bead (24.5x16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel frame (30x21.5mm), Sash (30x18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Hardware : Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. |
| 29 | S&F sheet glass 4.0mm thick tinted, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane , complete all as specified and directed. |
| 30 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples, complete all as specified and directed. |
| 31 | S&F 12mm thick toughened (Tempered) glass toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including locking arrangement, Hinges,handles etc complete all as specified and directed.Type: Single toughened glass (heat-treated)Standard: Conforming to IS: 2553 (Part 1): 2018Application: Full-height doors, sliding doors, partitions, or safety-critical areasFeatures: High impact resistance, shatter-safe behavior, suitable for high-traffic areasEdges: Polished or chamfered as required. |
| 32 | S&F factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with mitlti chamber, frame (60x58mm), sash (60x78mm). T profile (One vertical length in between two shutters) (60x74mm). Glazing bead (35x20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28x21.5mm), sash (31x27mm), Tprofile (27x17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8x100mm long fasteners, complete all as specified and directed. Hardware: Casement door handle made of zinc alloyed (white powder coated. Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. |
| 33 | S&F sheet glass 5.0mm thick tinted, selected quality & glazing with oil putty in squareexc 0.5 sq.m in each pane , complete all as specified and directed. |
| 34 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc., complete all as specified and directed. |
| 35 | M&L for brick work with sub class \"B\" bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 36 | M&L for 1/2 brick work withsub class\"B\" bricks , usingold sizebricks, straight or curvedon plan exc 6 m meanradius built in cement mortar 1:4, complete all as specified and directed. |
| 37 | Taking down cement or cement lime plaster, girth plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. |
| 38 | M&L for rendering 15mm thick Plaster in CM 1:6, onbrick orconcretesurface in cement mortar on internal wall surface finished even and fair without using extra cement, complete all as specified and directed. |
| 39 | M&L for rendering 15mm thick plaster in CM 1:4 onbrick work or concrete surfaces on external wall surface finished even and fair without using extra cement mixed with WPC @ 200ml/ bag of cement, complete all as specified and directed.Note: WPC shall be made measured and paid sperately. |
| 40 | M&L for rendering 5 mm thick plaster in CM 1:3 on ceiling concretesurface in cement mortar, finished even and fair without using extra cement complete all as specified and directed. |
| 41 | M&L for preparation of newly plastered surface on walls and applying two coats of Oil Bound Distemper over a coat of 3mm thick wall care putty, complete all as specified and directed. |
| 42 | M&L for prepartion of newly plastered surface of wallapplying two coat of weather proof anti fungal exterier emulsion paint on external surfaces includinga coat of alkali resistant priming paint with 2mm wall care putty at any height of building/ tower, complete all as specified and directed. |
| 43 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling, complete all as specified and directed. |
| 44 | M&L for preparation of old wall surface and applying two coat of oil bound distemper over a coat of 3mm thick putty, complete all as specified and directed. |
| 45 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling complete all as specified and directed. |
| 46 | M&L for complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying two coat of weather proof anti fungal exterier emulsion painton external surfaces including a coat of alkali resistant priming paint at any height of building/ tower, complete all as specified and directed. |
| 47 | Dismantling of floor, hearth or wall tiling with cement mortar bedding, tucking and roughening of wall and floor, backingand dispose rubbish out off the premises complete in all respect, complete all as specified and directed. |
| 48 | Dismantling wall, ceiling and floor boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, GI grid/ wooden frame work, complete all as specified and directed. |
| 49 | Providing and fixing seasoned Pine Wood Ceiling using solid pine wood planks of minimum 8 feet length, having a thickness ofnot less than 12 mm and width of 100 mm to 150 mm, as per approved design. The pine wood shall be kiln-dried to a moisture content of 10–12% and shall be free from warping, cracks, sapwood, insect infestation, and knots larger than 10 mm. Planks shall be machine-planed on all sides with tongue and groove joints or shiplap joints, if specified and fixed over a pre-installed wooden or metal framework using approved screws, nails, or concealed fasteners. The ceiling shall be polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer, including all sanding and surface preparation to achieve a smooth and uniform finish.Rate to include: (a)Supply of seasoned pine wood planks. (b)Surface treatment, polishing materials, and labor (c)Fixing hardware (d)Skilled labor, scaffolding, and all incidental works.Note: Framework will be paid separately. |
| 50 | M&L 2nd class softwood Plain fillets 25 sq.cm square,rectangular or triangular in section, clean sawn, secured with nails or brads , complete all as specified and directed. |
| 51 | M&L for calcium silicate ceiling board system having density 950-1200Kg/Cum which shall consist of high-quality calcium silicate boards, supported by a galvanized steel or aluminum suspension grid, suspended from the structural soffit using appropriate hangers and fixings. The system shall provide a durable, stable, and aesthetically pleasing finish. Calcium silicate boards should be ofsize 600 x 600mm, 12mm thick and Boards shall be free from defects, cracks, or chipsfixed with screw in a timber/ GI/ Aluminium frame work in flat or sloped ceiling as required, complete all as specified and directed. |
| 52 | M&L for GI frame powder coated work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed. |
| 53 | Hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 54 | S&F 4 mm veneered decorative teakplywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screws/ adhesive solutionto plywood/ flush door shutter and polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer, including all sanding and surface preparation to achieve a smooth and uniform finish as in wall panelling, complete all as specified and directed. |
| 55 | S&F 9 mm plywood grade BWR type BB fixed with screw to timber frameas in wall panelling, complete all as specified and directed. |
| 56 | M&L for plain fillets exc 6 cm n exc 13 sq.cm square,rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed. |
| 57 | M&L for chamfers, splays, grooves, rebates, rounded angles, rounded nosings, tongued and grooved edges (each tongue and each groove measured) etc., mouldings n. exc. 75mm girth on softwood, complete all as specified and directed. |
| 58 | S&F lnsulated PVC Wall Lining (thickness of PVC wall lining 25mm) consisting of PVC Insulated Panels with wood grain printed PVC sheets havingexpanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing, complete all as specified and directed. |
| 59 | M&L for coloured digital glazed vitrified tiles 10mm thick in floor exc 0.42sqm but n.exc 1.00Sqm each tile area set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including screed bedding 15mm in CM 1:6 complete all as specified and directed. |
| 60 | All as per Srl Item No 59.00 above but on vertical surface as in dados/ skirting over 10mm thick plaster as backing coat in CM 1:4, complete all as specified and directed. |
| 61 | M&L for coloured digital light shade vitrified tiles 10mm thick in floor not exc 0.36sqm each tile area set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including screed bedding 15mm in CM 1:6, complete all as specified and directed. |
| 62 | All as per Srl Item No 61.00 above but on vertical surface as in dados/ skirting over 10mm thick plaster as backing coat in CM 1:4, complete all as specified and directed. |
| 63 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, in floors etc. set & jointed, with neat cement slurry and pointed white cement with pigment over 15mm thick screed bed or bedding layer of mortar in cement mortar (1:6) for laying of tiles, complete all as specified and directed. |
| 64 | M&L for glazed ceramic coloured digital wall tiles of size area exc 0.06Sqm and not exc 0.18Sqm x 7-8mm thick set and jointed, including 10mm thick rendering in CM 1:4, mixed with PD proof 101 LW(+) of Dr fixitor equvalant integral WP admixer @200 ml/bag of cementfinished the surface even and fair, complete all as specified and directed. |
| 65 | Supply only PD proof 101 LW (+) of Dr Fixit or equivalent, complete all as specified and directed. |
| 66 | Dismantling of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed. |
| 67 | M&L for reinforced cement concrete 1:2:4, (nominal mix), type B-0,using 12.5mm graded crushed stone aggregate as in Chajjas, slab and the like, complete all as specified and directed. |
| 68 | Use & waste of formwork to Chajjas, slab, chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed. |
| 69 | S&F of TMTbars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 70 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 71 | M&L for granite stone slab18 to 19 mm thick machine cut polished, bedded and jointed in neat cement slurry and pointed in white cement with pigment to match colour of granite stone with and including screed bed of 20mm thick in CM 1:6, complete all as specified and directed. |
| 72 | S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceilingor laid in/on floor complete incl taking down old steel tubing 15 mm bore, complete all as specified and directed. |
| 73 | S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces,back nuts, unions, caps and plug etc ) and fixed complete to wall and ceilingor laid in/on floor complete incl taking down old steel tubing 20mm bore, complete all as specified and directed. |
| 74 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls, complete all as specified and directed. |
| 75 | S&F in repairSingle Piece WC with PP soft close seat cover, hinges, dual flush cistern fitting and fixing accessories, Size: 360x640x685mm, P Trap/ S-Trap, complete all as specified and directed. |
| 76 | S&F in repair vitreous china counter top wash hand basin, size 600x400x185mm including MS brackets including cutting and priming in with 32mm CP waste coupling and all other accessories, complete all as specified and directed. |
| 77 | S&F in repair single lever basin mixer without popup waste system with 450mm long braided hoses & base flange, complete all as specified and directed. |
| 78 | S&F in repair single lever wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange incl hand shower (without overhead shower), complete all as specified and directed. |
| 79 | S&FSingle Lever Sink Mixer Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges for 15mm bore, complete all as specified and directed. |
| 80 | S&F in repairs bib taps with wall flange , complete all as specified and directed. |
| 81 | S&F in repair angular stop cock with wall flange 15 mm borecomplete all as specified and directed. |
| 82 | S&F in repair 2 Way Bib Cock with Wall Flangecomplete all as specified and directed. |
| 83 | S&F in repair 15mm bore shower Rose chromium plated ABS material of size 200x200mm square brass with \"L\" bend and PVC washers complete all as specified and directed. |
| 84 | S&F CP Toilet paper holder with flap coverfixing with all necessary arrangementsscres etc., complete all as specified and directed. |
| 85 | S&F Soap dispenser push button modelcapacity 0.8 ltr of ABS body fixed all as per manufacturing instructions, complete all as specified and directed. |
| 86 | S&F CP Towel Rack 600mm long with out hangersand with lower hanger including with all fixing arrangemetns, complete all as specified and directed. |
| 87 | S&F 600mm long glass shelf with ss railingincluding with all fixing arrangemetns, complete all as specified and directed. |
| 88 | S&Fin repair Corner glass shelf with bracket 200mm radius, complete all as specified and directed. |
| 89 | S&F looking mirror (900x600x6 mm) with frame, complete all as specified and directed. |
| 90 | S&F waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed, complete all as specified and directed. |
| 91 | S&F in repair PVC connection 15mm dia and 60 cm long with 2 Nos PTMT check nuts with washers complete all as specified and directed. |
| 92 | S&F in repair CP hygienic spray (health facucet with 1.5M long tube), complete all as specified and directed. |
| 93 | S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity, complete all as specified and directed. |
| 94 | S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity, complete all as specified and directed. |
| 95 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste, including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915x460mm bowl size 410x330x160mm, complete all as specified and directed. |
| 96 | S&F in repairstainless steel plate rack made of 0.80 mm thick sheet of size 900x600x250mm complete all as specified and directed. |
| 97 | S&F waste fittings 40mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed, complete all as specified and directed. |
| 98 | S&F in repair cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 99 | S&Fin repair Cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed. |
| 100 | S&F in repair Cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 101 | S&F in repair cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed. |
| 102 | S&F in repair 100 mm dia spun cast iron longbends(any radius) diminishing pieces or tapers (larger bore measured), complete all as specified and directed. |
| 103 | S&F in repair 100 mm dia spun cast iron Branch pieces or tapers fitted ovel access doors (larger bore measured) , complete all as specified and directed. |
| 104 | S&F 75 mm dia spun cast iron long bends (any radius) diminishing pieces or tapers fitted ovel access doors (larger bore measured ), complete all as specified and directed. |
| 105 | S&F 75 mm dia spuncast ironBranch pieces or tapers (larger bore measured), complete all as specified and directed. |
| 106 | S&F in repair 110 mm bore PVC rain water pipe single socketed in any lengthwith rubber ring fixed to wall with clamp incl taking down old pipe, complete all as specified and directed. |
| 107 | S&F in repair 100mm stack clamp out of 50mm by 5mm flat iron and 16mm dia around iron stamp incl bolts and nuts and securing ends of clamp to wall or roof, complete all as specified and directed. |
| 108 | S&F in repair 75mm stack clamp out of 50mm by 5mm flat iron and 16mm dia around iron stamp incl bolts and nuts and securing ends of clamp to wall or roof, complete all as specified and directed. |
| 109 | S&F in repair 75 mm dia cast iron floor trap, complete all as speicfied and directed. |
| 110 | M&L for salt-glazed stoneware gully traps, square or round mouthed, type `P\" 150x100mm, complete all as specified and directed. |
| 111 | S&F CP gratings100mm dia, complete all as specified and directed. |
| 112 | S&F Cast iron 75mm bore cowls, complete all as specified and directed. |
| 113 | S&F Cast iron 100mm bore cowls, complete all as specified and directed. |
| 114 | S&F 25mm dia mild steel chromium plated curtain rails fixed with brackets, stops, rollers, etc., complete all as specified and directed. |
| 115 | Demolition of PCC in ground floors & pavings n exc 15cm thickness (below or above ground level) (unreinforced), complete all as specified and directed. |
| 116 | M&L for 75mm thick PCC 1:3:6,type C-2, using 20mm graded crushed stone aggregate as in plinth protection/ path etc., complete all as specified and directed. |
| 117 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate cement concrete in surface channels and drains incl necessary formwork, complete all as specified and directed. |
| 118 | M&L for PCC 1:2:4, type B-0, using12.5mm graded crushed stone aggregate for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 119 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc., complete all as specified and directed. |
| 120 | M&L for welding in repairs of n exc 6mm thickand not exc 2.5 cm in length, complete all as specified and directed. |
| 121 | Resecuring or easing & adjusting, without taking down shutters of any descriptionexc 1 sqm and n exc. 2 Sqm each, complete all as specified and directed. |
| 122 | Cutting holes in brick walls exc half brick but not exc one brick walls built in cement mortar or cement lime mortarfor inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4, Type B-1, as required, complete all as specified and directed. |
| 123 | Dismantling cup board shelf, partition, wall panelling or similar items including shutter, insulation boards/slabs/blankets of any description, fixed in any position fixed with screws, complete all as specified and directed. |
| 124 | M&L for 18mm thick one side decorative lamination and other side balancing white sheet consisting of carcass 18mm thick PVC sheet fixed with approved adhesive and self tapping screws incl all accessories for fixing of shelves, cabinets etc., complete all as specified and directed. |
| 125 | M&L for 6mm thick one side decorative lamination and other side balancing white sheet consisting o carcass fixed with approved adhesive and self tapping screws, complete all as specified and directed. |
| 126 | M&L for 18mm wide & 1mm thick PVC edge bending to paste on edge of PVC furniture with suitable adhesive, complete all as specified and directed. |
| 127 | S&F stainleless steel handle 75mmfancy type for cub board shutter, complete all as specified and directed. |
| 128 | S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed . |
| 129 | S&F continuous piano hinges mild steel hinges bright electro galvanised width of tops 40mm (when opened) complete all as specified and directed. |
| 130 | Dismantling/ removing of old roof treatment of any type including brick tiles, mud fushka etc to get the original RCC surface,cleaning with water etc complete to receive plaster/PCC and removing the debries out of MOD land, complete all as specified and directed. |
| 131 | M&Lfor PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in mass concrete, complete all as specified and directed. |
| 132 | M&L for 15 mm thick screed bedover the concrete / brick roof surfaces in cement mortar 1:4 surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 133 | M&L for applying a priming coat of @ 0.30 Kg/ Sqm with Bituminous primerincluding prepration of surface, complete all as specified and directed. |
| 134 | M&L for applying evenly a tack coat of industrial hot blown grade bituminen 85/25 @ 1.2 Kg/Sqm including cleaning surfaces over primer, completeall as specified and directed. |
| 135 | M&L for water proofing treatment of roof with APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) shall be laid with 100mm side lap/end lap on primed surfaces as per manufacturers instruction, complete all as specified and directed. |
| 136 | M&L for applying a coat of heat resisting paint ( aluminium bitumen paint)over APPsurface, complete all as specified and directed. |
| 137 | Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 138 | M&L for concealed point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLSH) and unsheathed cable and including drawn through PVC casing capping / conduit 25mm size with all fittings and accessories, terminated to PVC board of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and directed. |
| 139 | All as per Srl item No 138.00 above but for two way swithces, complete all as specified and directed. |
| 140 | All as per Srl item No 138.00 above but for one bell point control by one, one way switch complete all as specified and directed. |
| 141 | All as per Srl item No 138.00 above but for one 3 pin socket oulet 5 amps, onindependent board, complete all as specified and directed. |
| 142 | All as per Srl item No 138.00 above but for one 3 pin socket oulet 5 amps, onsame board with other switches, complete all as specified and directed. |
| 143 | All as per Srl item No 138.00 above but for for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS-H PVC insulated unsheathed multistranded copper conductor cable and with 2.5 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor as earth wire, complete all as specified and directed. |
| 144 | S&F in repair Modular switch 1 way 6 A, 1 module complete all as specified and directed. |
| 145 | S & F in repair Modular switch 2 way 6 A, 1 module complete all as specified and directed. |
| 146 | S & F in repair Modular switch 1 way 16 A, 1 module complete all as specified and directed. |
| 147 | S & F in repair Modular Bell push 6 A, 1 Module complete all as specified and directed. |
| 148 | S & F in repair modular Socket, 6A-2/3 pin combined 2 module complete all as specified and directed. |
| 149 | S & F in repair modular Socket, 6A/16A-2/3 pin combined 2 module complete all as specified and directed. |
| 150 | S&F in repair white cover plate with frame 1 Module complete all as specified and directed. |
| 151 | S&F in repair white cover plate with frame 2 Module complete all as specified and directed. |
| 152 | S&F in repair white cover plate with frame 3 Module complete all as specified and directed. |
| 153 | S&F in repair white cover plate with frame 4 Module complete all as specified and directed. |
| 154 | S&F in repair white cover plate with frame 6 Module complete all as specified and directed. |
| 155 | S&F in repair white cover plate with frame 8 Module complete all as specified and directed. |
| 156 | S&F for Metal flush box 1 module complete all as specified and directed. |
| 157 | S&F for Metal flush box 2 module complete all as specified and directed. |
| 158 | S&F for Metal flush box 3 module complete all as specified and directed. |
| 159 | S&F for Metal flush box 4 module complete all as specified and directed. |
| 160 | S&F for Metal flush box6/8 module complete all as specified and directed. |
| 161 | S&F Telephone socket complete all as specified and directed. |
| 162 | S&F TV socket complete all as specified and directed. |
| 163 | S&F Telephone wire 2 pair |
| 164 | S&F cable TV co axial cable |
| 165 | S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked) complete all as specified and directed. |
| 166 | S&F LED battern tube light along with fixture, 1x 20 watt, (4 Feet) wall mounted LED battern, with diffuser, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. Make : HPL Cat part No HPLLEDINVT5BPC20CW/ Havells/Bajaj or equivalent as approved. |
| 167 | M&L for lamp holder (Angle) PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 168 | S&F LED 12 watt complete all as specified and directed. |
| 169 | S&F LED building securtiy light 25 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 170 | S&F LED tube light along with fixture, 1x10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 171 | S&F LED mirror light wall light fancy fitting 10 watt, wall mountedPVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 172 | S&F LED light fitting 9/ 10W bulkhead luminaire including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv existing fittings complete all as specified and directed. |
| 173 | S&F in replacement of Bed side lamp decorative, E-27 screw type holder with 0-2 watt bulb suitable for bedroom, studu room, complete all as specified and directed. |
| 174 | S&F in replacement 36/ 40W LED (Size 2\"x2\") square shapedRecess mounting type luminaire having white polycarbonate body & Alumium heat shink with PMMA diffuser, 5700Kincluding connecting three core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed. Make:- Havells Cat part No VENUSNEO2X2PLR36WLED83OG2/ Bajaj/ Crompton Greaves or equivalent as approved. |
| 175 | S&F in repair Surge protection device (SPD) Voltage protection level Up upto 1.3 kV, suitable for protection of all terminal equipments Both Common & Differential Mode Protection complete all as specified and directed. Make: Havells Cat part No SKU: DHSA2NAN40320 SP+N, Bajaj/ Crompton Greaves or equivalent as approved. |
| 176 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arangements complete all as specified and directed. |
| 177 | S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metal body with louver including fixing all arangements complete all as specified and directed. |
| 178 | Refixing AC single phase static energy meter and three phase of existing with transparent hinge type boxincluding taking down and refix the same and all fixing all complete all as specified and directed. |
| 179 | M&L for submain wiring with 2x6.0Sqmm+1x6.0Sqmm earth wire single core PVC insulated FRLS-H PVC sheathed cooper cableconnecting to common earth dolly in and including heavy duty PVC Casing cappingas per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit length. |
| 180 | S&F sheet metal enclosure MCB DB 12 waySPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed. Make: L&T/ Legrand/ Schneider or equivalent as approved. |
| 181 | S & F MCB, SP (single pole ) 05 to 32 Amps, 10 kA, B curve for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider or equivalent as approved. |
| 182 | S & F MCB, SPN /DP (single pole and neutral ) 40 to 63 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider or equivalent as approved. |
| 183 | S&F MCB, TPN (Triple pole Neutral) 40/63 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider or equivalent as approved. |
| 184 | S&F sheet metal enclosure MCB DB 4 way, VTPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed. Make: L&T/ Legrand/ Schneider or equivalent as approved. |
| 185 | S&F 4 Pole, MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA connected through cable lugs of suitable size complete all as specified and directed. Make: L&T/ Legrand/ Schneider or equivalent as approved. |
| 186 | Refixing electric water heater, storage type existing type complete with all accessories such asconnection piece, fastner etc., complete all as specified and directed. |
| 187 | S&F 15/ 20 Amp Socket with 16/20 Amp MCB with metal box combinations (ISI marked) flush type universal complete all as specified and directed. |
| 188 | Supply, fixing and commisioning of electrical chimney width 90 cm (90 IN) auto clean, curved glass, filterless, touch control, motion sensor, energy efficent LED light, powerful suction wall mounted, black colour 1350 CMH complete all as specified and directed. |
| 189 | Taking down carefully copper/aluminum point wiring ( fancy ligh fitting at rooms, Jhumar at main hall, bar ceiling lights, MCB, SPB, fan socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets etc to be measured separately) , removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 190 | S&F Galvanized zinc metallic zinc coated Iron earthing electrode speciallized developed for high sensitive equipment. Model SN001 (LXXVI MM ) as per Cpri 300 Cm long. Tested on 52.kA, C % 12 max, mn 0.60%mm class type GALV. Yield strength 329, tensile Strength 426, Elongation Bend/ Flattering. Thickness internal disposes\" 2 inch x6mm with base plate 3.15 to close the earthing rod. Terminal 2 inchx6mm filled with highly conductive compound which increase the life of earthing electrode. Composition of chemical filled in electrode water solubility . Grain size 100 mesh, along with SN make BFC compound non toxic, non reactive, non explosive and non corrosive, longerlife Easytomaintain less space consistent results. Earthing pitand chamber cover complete all as specified as directed. Make: SN ENGINEERING or in equivalent as approved. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
