Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-03-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-03-2026 |
| Sl. No. | Item Description |
| 1 | Demolishing Brickwork or stone/boulder masonry, laid dry complete all as specified and directed by Engineer-in-charge |
| 2 | Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed. |
| 3 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L PCC Type D2 1:4:8(40mm graded stone aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 7 | M&L Reinforced cement concrete(Nominal Mix)Type B0 1:2:4 (12.5mm gradedSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 8 | M&L Damp proof course 40mm thick In cement concrete 1:2:4, type B-0to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 9 | M&L for brick work with sub class `B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 10 | Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and directed. |
| 11 | M&L for 12 mm thick rendering on brickwork / concrete surface on wall finished even and smooth (without using extra lime or cement) in CM 1:6 complete all as specified and directed by Engr-in-Charge |
| 12 | M&L for 15 mm thick rendering on brickwork / concrete surface on wall finished even and smooth (without using extra lime or cement in CM 1:4 using liquid water proofing compound @ 200ml of 50kg of cement complete all as specified and directed. Note:- LWPC shall be measured & paid seperately. |
| 13 | Supply only liquid water proofing compound complete all as specified and directed. |
| 14 | M&L for 6 mm thick rendering as in ceiling, finished even and smooth (without using extra lime or cement) in CM 1:3 complete all as specified and directed by Engr-in-Charge |
| 15 | M&L for applying two or more coats of luster paint over a coat of primer on new wall/ceiling surfaces, using 1st quality acrylic luster paint (ready mixed), low VOC content not exceeding 50 gms/litre, washable, stain-resistant, non-fading, smooth finish, of approved shade and colour, complete all as per manufacturer’s specifications and as directed.(Make : Asian Paints Royale Lustre Luxury Emulsion or equivalent) |
| 16 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqmand UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).Note: Item shall be included rate of writing of qtr no in block, roman, italic or indian font complete as per direction by Engr-in-Charge. |
| 17 | M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour after complete removal of existing treatment form wall/ceiling complete, as per manufacturer\"s specification. Two or more coats on old work complete all as specified and directed. |
| 18 | M&L for complete removal of existing treatment from old wall/ceiling surfaces, preparation of surfaces including scraping, cleaning, applying 3mm thick cement-based wall putty, a coat of primer, and two or more coats of 1st quality acrylic luster paint (ready mixed), VOC content not exceeding 50 gms/litre, washable, stain-resistant, non-fading, smooth finish, of approved shade and colour, complete all as per manufacturer’s specifications and as directed. |
| 19 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.67 ltr/ 10 sqm) over existing cement paint surface after complete removing old coat of paint with sander, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Note: Item shall be included rate of writing of qtr no in block, roman, italic or indian font complete as per direction by Engr-in-Charge. |
| 20 | M&L 3mm thick wall care putty on wall surface complete all as specified and directed. |
| 21 | Taking down Chowkhats or frames not exc. 1.5 sq. m eachdoors, windows and clerestory windows with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 22 | Taking down Chowkhats or frames not exc. 1.5 sq. m eachdoors, windows and clerestory windows with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 23 | M&L two coats of synthetic enamel paint over a coat of red oxide primer after preparation of old steel and iron surfaces of any descripltion, exc 10cm in width or girth completeall as specified and directed |
| 24 | Providing and fixing 100X58X1.90 mm IS : 12817 marked stainless steel butt hinges withstainless steel screws etc complete all as specified and directed. |
| 25 | S&F 125mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 26 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. (Copper oxidised as per IS 1378) 250X16 complete all as specified and directed. |
| 27 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 28 | S&F, 5.5 mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge. |
| 29 | S&F stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed by Engr-in-charge. |
| 30 | S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 31 | Providing and fixing of any size bright finished magnetic door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete all as specified and directed. |
| 32 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by the Engineer-in-Charge. |
| 33 | M&L for glazed vitrified digital coloured tiles of approved pattern on vertical surfaces, size 600 x 1200 x 8–9 mm thick, fixed with Roff Vitro Adhesive by Pidilite or equivalent, and jointed/pointed in white or coloured cement grout to match the shade of tiles, including 10 mm thick cement plaster in CM (1:4) as backing coat, complete all as specified and directed by the Engineer-in-Charge. |
| 34 | M&L Glazed Virifiedtiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 35 | M&L Full Body Virifiedtiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 36 | M&L for coloured Glazed ceramic designer mosaic tiles(200x200mm) x 7mm thick, in floors surfaces etc. set and jointed in neat cement slurry and pointed in epoxy grout of any colour to match over 20 mm thick screed bed in CM 1:4 etc complete all as spd and as directed by Engr-in-Charge. |
| 37 | M&L for coloured Glazed ceramic designer mosaic tiles(200x200mm) x 7mm thick, in set and jointed in neat cement slurry and pointed in epoxy grout of any colour to match over 15mm thick backing coat in CM 1:4 etc complete all as spd and as directed by Engr-in-Charge. |
| 38 | M&L 25mm thick PCC in Cement concrete type B-1,1:2:4 (20mm graded aggregate)as in sub base as specified and directed by engr-in-charge |
| 39 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 40 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 41 | Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 42 | Taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 43 | Taking up or down 50mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 20mm dia nominal bore having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & brass threadedfittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc complete as per direction of Engineer in Charge |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 25mm dia nominal bore having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge. complete as per direction of Engineer in Charge. |
| 46 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 50mm dia nominal bore having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge. complete as per direction of Engineer in Charge. |
| 47 | S&F 50mm fixed in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 48 | M&L in repairs 12mm thick toughened moduler glass partitaion as in railing, staircase including seamless frosted glass fixing at powder coated aluminium/SS-304 corner frame/bracket work for glass, seal by silicon sealent complete all as specified and directed. |
| 49 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including all fitting complete all as specified and directed |
| 50 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm of approved quality and colourcomplete all as specified and directed. |
| 51 | Dismantling 100 mm dia CI, PVC or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres leadcomplete all as specified and directed. |
| 52 | Dismantling 75 mm dia CI, PVC or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres leadcomplete all as specified and directed. |
| 53 | S&F 110mm dia Polypropylene (PP) pipes, mineral-filled, single socketed, any length, having density 1.6 gm/cm³, soundproof with sound rating of 12 dB(A) at 2 lps as per DIN 4109 in association with EN 14366, suitable for all pressureless waste pipes in accordance with DIN EN 12056 and DIN 1986-100, including all bends, oval access door/fittings etc, fixed to walls/ceiling with heavy duty double sided clamp (Shaivi or equivalent) by interval not more than 2.00m complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F 75mm dia Polypropylene (PP) pipes, mineral-filled, single socketed, any length, having density 1.6 gm/cm³, soundproof with sound rating of 12 dB(A) at 2 lps as per DIN 4109 in association with EN 14366, suitable for all pressureless waste pipes in accordance with DIN EN 12056 and DIN 1986-100, including all bends, oval access door/fittings etc, fixed to walls/ceiling with heavy duty double sided clamp (Shaivi or equivalent) by interval not more than 2.00m complete all as specified and directed by Engineer-in-Charge. |
| 55 | PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls including all fittings complete all as specified and directed |
| 56 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 57 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 58 | Roof waterproofing with SBS Wet Boanded Membrane :Providing and Applying Wet Applied Polymer Modified Bituminous Waterproofing Membrane (SikaShield® W162 ED IN 1,5 mm) having release liner on both side for wet- application on the retaining wall. The procedure involves the concrete to be saturated by water (use water hose). Any protrusions need to be removed and the concrete surface needs to be cleaned. A bonding slurry SikaShield® W1 (with approximate of 2–3 kg/m2) is applied to the substrate. At one end of the membrane, peel away part of the release liner from the membrane\"s underside (on the Sika sticker side). Bond this end of the membrane to the adhesive and the substrate. Continue to peel away the release liner sideways from the rest of the membrane\"s underside. Bond the rest of the membrane to the adhesive and the substrate and hard roll firmly fixing it onto the adhesive.The Modified Bituminous Waterproofing Membrane shall have following typical properties:Resistance to static puncture > 250 N (ASTM E154) Tensile strength ≥ 11 kN/m (ASTM D5147) Elongation ≥ 45 % (at break) (ASTM D5147)Tear strength Longitudinal ≥ 350 N Transverse ≥ 250 N (ASTM D5147) Joint shear resistance ≥ 500 Nz/5cm (EN 12317-1)Foldability at low temperature (At -25° C) Pass,No cracks observed (EN 1109) Permeability to liquid water Water Absorption (%) ≤ 0.5 (ASTM D5147) Resistance to water penetration No Leakage (ASTM D 5385)Ambient air temperature +10 °C min. / +40 °C max Relative air humidity Upto 80 %Substrate temperature +10 °C min. / +40 °C max |
| 59 | Supplying and Laying of 120 gsm geotextile membrane over the coating before screed complete all as specified and directed. |
| 60 | Open the grove in v shape and fill with the Sikaflex 127 a single-component Pu sealant. Providing and applying Sikaflex®-127, a single-component, elastic, moisture-curing hybrid polyurethane sealant and adhesive. Suitable for sealing connection joints, window and door frames, precast concrete elements, and facades. Also used as an adhesive for bonding construction components like concrete, wood, metals, PVC, and aluminum composite panels. Key Features: High weather resistance, over-paintable, low odor, and good adhesion to various substrates without special pre-treatment. Technical Specifications: Shore A hardness ~35, tensile strength ~1 N/mm², elongation at break ~350%. Curing: ~2 mm/24 hours curing rate. |
| 61 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed. |
| 62 | Demolishing Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed |
| 63 | Providing, cement concrete TypeB0 1:2:4 (12.5mm gradedaggregate) in roof kerbs or mud stops, rounded or chamfered on edges,roof slab etc complete all as specified and directed. |
| 64 | M&L Steel work in tubular trusses including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 65 | M&L Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. Using R1 series with frame (33 mm & above ) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre). |
| 66 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 67 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 68 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as in Gutter (600 mm over all girth) complete all as specified and directed. |
| 69 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft loose soil complete all as specified and directed. |
| 70 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 71 | Demolishing cement concrete ete of any description and in any position not otherwisespecifically provided for complete all as specified and directed. |
| 72 | M&L for vitrified heavy duty parking tiles 400x400 mm, 11–12 mm thick, skid-resistant/anti-slip finish, of approved shade/pattern, laid in footpath and courtyard areas using 3 mm spacers, jointed with epoxy grout of approved manufacturer to match the shade of tiles, including rubbing, cleaning and finishing the surface, laid on and including 20 mm thick bed of cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all asspecified in SSR Part-1 complete all as specified and directed |
| 74 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions false ceiling including sunk or raised mouldingpattern approved by GE fibre fixed to & including the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finishincluding necessary supporting hanger with 4.0 mm dia GI wire and \"J\" bolts washer nuts for securing frame work toGl frame work for (605 mm x 605 mm) seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applyingtwo coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 75 | M&L Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 76 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 77 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 78 | M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 79 | M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 80 | S&F PVC Designer False Ceiling made of PVC laminated panels 10 mm thick, fire-retardant, ISI marked, with density not less than 1.4 gm/cm³, in approved shade, colour and pattern, with laminate finish (glossy/matte as approved), fixed with screws to existing framework, with all joints aligned, edges neatly finished, including cut-outs for light/fan/AC fittings as required, surfaces cleaned and complete all as specified and directed.Note: GI framework shall be measured and paid for separately). |
| 81 | M&L treatment on capillary wall(a) Substrate preparation vertical:Cleaning and cheepingthe bricks plaster surface make itdust and sludge free, removing any extended portions by grinding using suitable equipments. The substrate to be made suitable for waterproofing system application.(b) Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visible penetrated aarea. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm drilling holes 10mm diameter in masonary structure along the side of the joints at 45 degree so as to cross the bick/ block at the intervals spacing if 10-30 cm depending on extent of rising dempness as per recommendation of Engr- in- charge, Cleaning of hole:- Clean the hole by air blower proir to fixing nozzles. Install Sika @ packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packet securely using Sikadar 31. Cutting of packers :- Cut the packers after completion of grouting without damaging structural elements. AND seal with sikagard 694 fi.(c) Injection resin for re-injectable hose as per manufacturer instruction:Providing and applying of a 3 part, very low viscous, solvent free, elastic polyacrylic injection resin Sika Injection-306 with a versatile and adjustable reaction time. The resin must be capable of reversibly swelling and shrinking; have mixed viscosity of 3-11 m.Pa.s at +20 °C according to ISO 3219; curing time of 8-50 mins depending on accelerator dosage. The polycrylic resin must have proven function test report from Wissbau with re-injectable hose system and proven compatibility test report with PVC membrane system from same manufacturer. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. (d) Waterproofing coating:Providing and applying of SikaTop-109 Seal IN ready to use 2 component acrylic cementitious waterproofing coating comprising of 2 coats of equal consumption of 1 kg/sqm and reinforced with glass fabric cloth Sika Fabric-50 applied over a saturated surface. The 2 coats must be applied at right angle to each other with a brush. The coating must be taken to a height of 300 mm on walls and 600 mm in splash area. |
| 82 | Taking up/down plants or vegetation growth from wallupto roof levelby means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not excone brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as directed by Engineer -incharge. |
| 83 | ACP Cladding (Plain)S&F Aluminium Composite Panel (ACP) sheet 4 mm thick (with aluminium skin of not less than 0.5 mm on both sides), exterior/interior grade, coated with PVDF/Polyester paint in approved colour/finish (solid/metallic/wooden texture etc.), including necessary frame work with aluminium tubular/angle/tee sections, cleats, brackets, rivets, screws, silicon sealant, back-up rods, washers etc., for fixing in vertical/horizontal/curved or any shape at any height, including cutting to shape and size, bending, grooving, edge finishing and installation, complete all as specified and as directed. |
| 84 | S&F decorative acrylic laminate of approved make, colour, shade and pattern, thickness 2.0 mm (as specified), fixed with approved adhesive over backing of 18-19mm thick marine plywood (BWP) as per IS 710, including edge banding / lipping of matching PVC / acrylic edge strips, provision of grooves / design patterns as approved by Engineer-in-Charge, all edges and corners finished neatly and complete all as specified and directed. |
| 85 | Supply and fix of 18mm thick marine plywood (BWP) as per IS 710, laminated both sided of any colour of sunmica sheet of 0.9 mm thick for kitchen cabinets etcincluding edge banding / lipping of matching strips as approved by Engineer-in-Charge, all edges and corners finished neatly and complete all specified and as directed. |
| 86 | S&F decorative handles of approved make, design, colour/pattern as approved by Engineer-in-Charge, suitable for modular kitchen cupboards, size 150 mm to 200 mm, fixed with necessary screws and accessories, complete all as specified and directed. |
| 87 | Supply and fix perforated cutlery basket of (Appx size)520x535x95mmfabricated with purpose made stainless steel of grade 304, weight around 6-8 Kg per each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, fixed in repairs, complete all as specified and as directed. |
| 88 | Supply and fix stainless steel cup and saucer rack(Appx size) 520x535x90mmfabricated with purpose made stainless steel of grade 304, weight around6- 8 Kg per each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, fixed in repairs, complete all as specified and as directed. |
| 89 | Supply and fix perforatedthalirack of size(Appx size) 520x535x180mmfabricated with purpose made stainless steel of grade 304, weight around 6-8 Kg per each rack, using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, fixed in repairs, complete all as specified and as directed. |
| 90 | Supply and fix plain basket (Appx size)520x535x180 mm size fabricated with purpose made stainless steel of grade 304,weight around 6-8 Kg per each rack , using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, fixed in repairs, complete all as specified and as directed. |
| 91 | Supply and fix pull out 3 shelf(Appx size)300 x485x530 mm size fabricated with purpose made stainless steel of grade 304, weight around6- 8 Kg per each rack using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, fixed in repairs, complete all as specified and as directed. |
| 92 | Supply and fix multipurpose double tier of (Appx size)300 x485x430 mm,with fabricated purpose made stainless steel of grade 304, weight around 6-8 Kg per each rack , using square hollow tubes for frame work and solid round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, fixed in repairs, complete all as specified and as directed. |
| 93 | Supply and fix modular aluminium profile door shutters for cutlery cupboards including:(a) Aluminium profiles: Modular sections of approved manufacturer, colored anodized as per approved finish, providing structural strength and aesthetic appearance.(b) Glazing: Tinted glass of approved thickness (typically 5–6 mm) cut and fixed securely within aluminium frames using gaskets or glazing beads to prevent movement or rattling.(c) Hinges & fittings: Suitable hinges (concealed/exposed as per design), magnetic catches, handles, locks, and other necessary hardware for proper door operation. All fittings to be corrosion-resistant and approved quality.(d) Installation: Doors to be leveled, aligned, and adjusted for smooth opening/closing. Any cutting/trimming to fit cupboard dimensions included. Protection to finishes during handling and installation.(e) Testing & finishing: Ensure doors operate smoothly without rattling; edges polished; fittings functional; clean and hand over ready for use.Notes1. Colour, finish, and design to be approved by Engineer-in-Charge before execution.2. Handles, locks, catches, and fittings included in the item rate.3. Measurement: *Per door shutter* (or as specified in BOQ). |
| 94 | Supply and fix telescopic channels, soft closing, powder coated with ball bearings, suitable for sliding SS plate racks 60 cm long, standard width, fixed over and including 2nd class hard wood rectangular fillet sectional area exc. 3 sq.cm & n.exc. 6 sq.cm, clean swan secured with screws and the fillet fixed on cudappah stone with screws, all as specified and as directed. |
| 95 | Supply and fix modular stainless steel handle of any colour oval shape platefabricated type 150mm long of approved design, shape,colour and make with ISI mark embosed on it, fixed in repairs with nut screws & washers complete all as specified and as directed. |
| 96 | Supply and fix stainless steelfinish soft closing hingesof approved design, shape and make with ISI mark embosed on it, fixed in repairs with nut screws & washers complete all as specified and as directed. |
| 97 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)including fixing to flush pipe to Pan, including all joints complete all as specified and directed. |
| 98 | S&F in repairs ofDiverter with Spout in Rose Gold finish comprising Exposed Part Kit for 3-Outlet Diverter including cover plate and all necessary fittings, complete all as specified and directed by Engr-in-Charge.Make: Hindware or equivalent as approved by GECat. Part Nos.: F410068RGD (Exposed Part Kit for 3-Outlet Diverter, compatible with Cat. No. F860068) and F410010RGD (Bath Tub Spout with Tip-Ton). |
| 99 | S&F repairs ofRose Gold Overhead Shower, 250 mm square shower rose with 380 mm arm, Cat. Nos.: F160161RGD (shower rose) and F160151RGD (shower arm), Make: Hindware or equivalent, including all necessary fittings, connections, and accessories, complete all as specified and directed by Engr-in-Charge.” |
| 100 | S&F repairs of White Vitreous China Wash Down Water Closet (WC) Pan, wall-mounted, size 52×36×35 cm, with mild steel Chromium-Plated or aluminised hinging device including soft-closing seat cover, connection to down pipe and flushing pipe, Make: Hindware, Cat. Part No.: 92567 (P-21) or equivalent, complete all as specified and directed by Engr-in-Charge. |
| 101 | S&F repairs of Pneumatic Concealed Cistern Full Frame & Drain Set with Flush Plate, Make: Hindware, Cat. No.: 527946, including Loop Neo Rose Gold Flush Plate, Cat. No.: F860063RGD or equivalent, with all necessary fittings, connections, and accessories, complete all as specified and directed by Engr-in-Charge. |
| 102 | S&F repairs of Health Faucet (ABS body) with mild steel Chromium-Plated finish, suitable for 15 mm dia pipe, including 1.25 m long flexible tube and ABS wall hook, making all necessary connections and fixing in position, complete in all respects as specified, Make: Hindware, Cat. Part No.: F160152RGD or equivalent, complete all as specified and directed by Engr-in-Charge |
| 103 | S&F Towel Ring of approved size and design as per enginner in charge complete all as specified and directed. Cat. No.: F880007RGD or equivalent |
| 104 | S&F Tumbler Holder of approved size and design as per enginner in charge complete all as specified and directed Cat. No.: F880001RGDor equivalent |
| 105 | S&F Soap Dish of approved size and design as per enginner in charge complete all as specified and directed Cat. No.: F880011RGD or equivalent |
| 106 | S&F Towel Shelf of approved size and design as per enginner in charge complete all as specified and directed Cat. No.: F880008RGDor equivalent |
| 107 | S&F Bottle Trap 32mm of approved size and design as per enginner in charge complete all as specified and directed Cat. No.: F850004RGD or equivalent |
| 108 | S&F Square Drain Jali 127mm of approved size and design as per enginner in charge complete all as specified and directed Cat. No.: F860058 or equivalent |
| 109 | S&F 15mm bore Angular Stop Cock with Wall Flange of approved size and design as per enginner in charge complete all as specified and directed Cat. No.: F410006RGD or equivalent |
| 110 | S&F 15mm bore Bib Cock with Wall Flange of approved size and design as per enginner in charge complete all as specified and directed Cat. No.: F410004PGDor equivalent |
| 111 | S&F in repair LED Mirror, vertical type, Hindware Cat. No.: F680036, size 800×600 mm, including all necessary fittings, mounting accessories, connections, and fixing in position, Make: Hindware or equivalent, complete all as specified and directed by Engr-in-Charge |
| 112 | S&F repairs of Concealed Stop Cock, Heavy Duty, 15 mm, including Exposed Part Kit for Concealed Stop Cock, Cat. No.: F410007RGD &F850096, Make: Hindware or equivalent, including all necessary fittings, connections, and accessories, complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F in repairs of Vitreous China Counter Top Wash Hand Basin (WHB), Hindware Cat. No.: 91094, Snow White, fancy type, overall size 490×400×150 mm, including 32 mm CP Pop-Up Waste Coupling (Full Cap ceramic) Cat. No.: F860053, CP Bottle Trap Cat. No.: F850003 (32 mm) with 225 mm & 175 mm long wall connection pipes, wall flange (Premium), 300 mm long PVC connection pipe, and all necessary fittings and accessories, Make: Hindware or equivalent, complete all as specified and directed by Engr-in-Charge. |
| 114 | S&F repairs of Rose Gold Pillar Cock, tall body, Cat. No.: F410002RGD, of make Hindware or equivalent as approved by GE, including all necessary fittings, accessories, and connections, complete all as specified and directed by Engr-in-Charge.” |
| 115 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.” |
| 116 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.” |
| 117 | M& L for Fixing OnlyLED light fittings 1\"x1\", 1\"x4\", 2\"x2\" and1 feet of any type and size after necessary repair of civil and elect work etcincluding connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed by Engr-in-charge. |
| 118 | M&L for Point wiringconcealed with 1.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), drawing in and including PVC conduit 20 mm dia,cutting chases wall & ceiling and making good to disrurbed surface of wall ,ceiling etc,having wall thickness not less than 2 mm with modular GI box with modular base and cover plate (for mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistranded) FRLS copper conductor continuous earth wire for one light /fan/Exh fan /bell point controlled by one way 5 Amp modular switch complete all as specified and directed. |
| 119 | All as per item No. 118 above but for one 5 Amp socket point controlled by one 5 Amp modular switch on same board complete all as specified and directed. |
| 120 | All as per item No. 118 above but for one 5 Amp socket point controlled by one 5 Amp modular switch on independent boardcomplete all as specified and directed. |
| 121 | All as per item No 118 here in before but 2.5 Sqmm cable with 2.5 Sqmm earth wire for one 15 Amps socket point controlled by one 15 Amp modular switch on independent board complete all as specified and as directed. |
| 122 | Supply & fixing switch modular type 5 Amps AC, 230V single way complete all as specified and directed. |
| 123 | S/F socket outlet 2 in 1,3 pin 5 amps modular type 230 Volts complete all as specified and directed. |
| 124 | Supply & fixing ofmodular switches 15 Amps, single way, 230V complete all as specified and directed. |
| 125 | Supply & fixingof modular socket 2 in 1, 5 pin, 5 amp and 15 Amps multipurpose 230V complete all as specified and directed. |
| 126 | Supply & fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 127 | Supply & fixing ofbatten holder, PVC body angular type 230V complete all as specified and directed. |
| 128 | Supply & fixing ofmodular bell push flush type 5 Amps 240 Volts complete all as specified and directed. |
| 129 | Supply & fixingofcall bell AC 230 Volts single phase 240 Volts complete all as specified and directed. |
| 130 | Supply & fixingof ceiling rose 3 plates polycarbonates, isolated body complete all as specified and directed. |
| 131 | S&F modular fan step regulator 60-120 W 1 module complete all as specified and directed. |
| 132 | S&F of Decorative, wall mounting lightbrass made bracket with 132 mm X 98mm. Decorative oval shape base, Brass Arm 305 mm . Length tipped with Decorative Brass leaf and provided with 52 mm. Length X 34 mm. Dia. Gallery with flower at top end with 2 Pin Brass Holder inside Frosted Glass shade 155mm x 129 mm, in Black Nickel Plated finish as Per IS/5077/1969 with 5 watt LED Lamp complete all as specified and directed |
| 133 | Supply & fixing of LED lamp 9watts inverter Bulb , 6500K, energy savings with cool daytype, complete all as specified and as directed. |
| 134 | Supply and fix DLYT18 W LED Recess downlight combines performace and economy in alightweight,IP40 rated fixture featuring a hiigh efficiency driver and long life LED ensuring reliable and energy efficient illumination for commercial and residential spaces. |
| 135 | Supply and fix The fame Spot 9 W LED Spotlights offer high performance illumination with precise beam control for commercial andretail spaces. Designed for efficiency and longevity, they ensure consistent lighting quality with a sleek modern aesthetic. |
| 136 | Supply and Fix energy efficient marathone ultra Rope light (50 M ), 120 LED/ M, IP 65 water proof and striplight , IP 65 protection InclPlug and Play SKU or driver etc with connected accesoies complete all as specified and directed by Engineer-in-charge. |
| 137 | S&F wall Bracket lantern ,Fully cast aluminium body finished with polyurethane paint ( with prior treatments ) with acrylicwindow cover total lenth 590 mm ( 23.6 inches) & max projection Breadth 285 mm(11.4 inches).Base provided 300 mm (12 Inches)X112mm (4.5 Inches) for wall mounting WithB22 Brass Holder provided with aluminum Cover and 20 W LED Bulb complete all as specified and directed by Engineer-In-charge. |
| 138 | Supply & fix VPTN DB enclosure with vertical type load line distribution board, double door, 4 way AC 3 Phase 415 volt with TPN bus bar 250 Amps for each phase with 2 Neutral bar, 2 Earthbar and with provision forMCCB up to DPX3 200 A as incomer and SP/TP MCB\"s as out going complete all as specified and directed by by Engr-in-Charge |
| 139 | Supply & fix MCCB 4 Pole, 63 Amps 415 Volts, having breaking capacity 16 KA, with thermal magnetic protection or thermal based Releaseunit for existing LT Panel /proposed DB and testing complete all as specified and directed |
| 140 | Supply & fixing of 8 way SPN DB single door type Suitable for surface and flush mounting. IP 43 with metal door complete all as specified and directed by Engr-in-Charge |
| 141 | Supply & fixing of 12 way SPN DB single door type Suitable for surface and flush mounting. IP 43 with metal door complete all as specified and directed by Engr-in-Charge |
| 142 | Supply & fixing of MCBs, SP 6 to 32 Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection.complete all as specified and as directed. |
| 143 | Supply & fixing of MCBs, SPN 6 to 32Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection. complete all as specified and as directed. |
| 144 | Supply & fixing of MCBs, SPN 63 Amps C characteristics of 10 kA breaking capacity, including all incoming and out going electric connection. complete all as specified and as directed. |
| 145 | S&F for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase- Red, Neutral - Black, Earth - Green) in PVC conduit drawing into and including concealed rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories of following nominal size 2x4 sqmm + 1x4 sqmm earth wire in suitable size of conduit complete all as specified and directed |
| 146 | S&F for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase- Red, Neutral - Black, Earth - Green) in PVC conduit drawing into and including concealed rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories of following nominal size 2x6 sqmm + 1x6 sqmm earth wire in suitable size of conduit complete all as specified and directed |
| 147 | S&F for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase- Red, Neutral - Black, Earth - Green) in PVC conduit drawing into and including concealed rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories of following nominal size 2x10 sqmm + 1x10 sqmm earth wire in suitable size of conduit complete all as specified and directed |
| 148 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point or indicated including testing on completion (for Main DB of block) complete all as specified and directe |
| 149 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed. |
| 150 | Taking down existing energy meters any type any capacity, keeping aside safely & refixing/connectingthe same in its original position after making complete of point wiring/sub main wiring of bldg/Qtr complete, all as specified and directed by Engr-In-Charge. Note:- Small items required for fixing the electric energy meter at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates. |
| 151 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by Engr-in-Charge |
| 152 | Taking down ceiling fan / Exhaust fan by disconnecting the electric connection and dismantling the blades and removingfrom ceiling or wallof bldg by descrewing the nut bolt and deposite to MES store yard complete all as specified and directed by Engineer-in-Charge |
| 153 | Rehanging and refixing only ceiling fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 Sqmmfrom ceiling rose or connector block offan including fan rod of suitable size and minor repairs such as replacement of locking pin, reel insulators, bolts, nuts etc and spraying one coat of synthetic enamel paint of color approved by GE/ Engr in charge all as required and directed. |
| 154 | Taking down Geyser of any capacityby disconnecting the electric connection from wall of bldg by descrwing the nut bolts and refixing the same place after completion of civil repair work etc complete all as specified and by Engineer-in-charge |
| 155 | Supply and fixDuctless Auto clean Wall mountedfilterless electricChimney of230 V, AC motor, 50 Hzwithheat Auto Clean, touch, Gesture and remote control withmotion & Odor sensor ,in 60x48X38Cm size, Air suction capacity 1400 CMH suitable for 100-200 Sq ft kitchen ,2-4 burner stove, and Heavy frying / grilling etc incl suitable size went Pipe and connected Accessories complete all as specified and directedby Engineer-in-charge |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
