|
| 1 | Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed. |
| 2 | M&L for brick work with using sub class \"B\" brick,straight or curved on plan exc. 6 meter radius, built in CM (1:6) for wall complete all as spfd and directed. |
| 3 | Taking down cement plaster of any description on brick or stone walls or from concrete surfaceincl racking out joints hacking for key scrubbing with water etc all as specified. |
| 4 | M&L for rendering15mm thickwith CM 1:4 on fair face and other than fair faces of brick work,finishing fair and evenwithout using extra cementcomplete all as spfd & directed. |
| 5 | M&L for applying two coat of oil emulsion distemper on wall/ceiling old /newly decorative plastered/ unplastered wall/ceiling with 1 mm wall care putty over a coat of primer, upto any height ,after preparation. incl complete removal of existing treatment complete all as specified and directed |
| 6 | M&L for preparation of old/ newly plastered surfaces of wall and applyingtwo coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer\"s instructions including necessary scaffolding complete all as specified and directed by Engr- in Charge. |
| 7 | M & L for applyingone coat of synthetic enamel painton old paintedwooden surfaces of any descriptioncomplete all as specified including preparation and complete removal of existing treatment complete all as specified and directed . |
| 8 | M & L for applyingone coat of synthetic enamel painton old painted steel surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed |
| 9 | Demolition Cement concrete (unreinforced)in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 10 | M&L providing cement concrete(1:3:6) type C-1 using 20 mm graded aggregate, plinth protection / sub base , lintels upto 1.5 mtr long,cills,steps, and other similar band, plinth course, string course, lacing course, parapets and railing upto 60cm in height, coping, apex stones, bed plate, water troughs and like including weathring, slightly rounded or chamfered angles and troughtingetc complete all as specified and directed. |
| 11 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 12 | M & L for cement concrete (Nominal mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) in Beams, lintel/roof beam, side support of path, similar work etc complete all as specified and directed.. |
| 13 | Dismantling floor, heart wall tiling including cement and sand mortar bedding ( but not backing ) including rubbish off the premises complete all as specified and directed |
| 14 | M&L for non- skid coloured creamic tiles (1st quality/ premium quality) 7 to 8 mm thick, ( square/ rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, as in floor set and jointed in neat cement slurry and pointed in coloured or whitecementto match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 15 | M&L for glazed coloured ceramic tile,first quality( of approved class , colourand design/ dark shade ) of size 300 x 450x7 / 350x450x7 / 350x250x7 thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with colouredtiles, over with and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tilescomplete all as specified and directed. |
| 16 | Taking down of any chowkats or frame (Wooden, steel, aluminium, press steel, pvc etc.) with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 17 | S&F PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet etc.complete all as specified and directed. |
| 18 | S&F factory made solid PVC moulded door shutter withcore 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm prelam PVC sheet on back face and fixing to framecomplete all as specified and directed by enginer in charge, |
| 19 | S&FSS butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed. |
| 20 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 21 | S&F 150mm long aluminiumhandles, cast type, anodized and fixed complete all as specified and directed. |
| 22 | S&F powder coated aluminium sliding window twotrack with two glass shuttersincl fixing 4.8 mm thick plain glass, and outer side covered withwiremesh with and including stainless steel wire gauge cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium power coatet sections, aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etccomplte fittings as approved. Note Size of aluminium section shall beunder :-(i) Three track top and vertical - Jindal main-2010 section No 20829 or equivalent (ii)Three track bottom- Jindal main-2010 section No 20830 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent |
| 23 | S&F for grill, T, joist channel, MS pipe, angel, flat, or tee section, round or square bar as in post and strut, frame/chowkhat , in fencing including drilling holes notching for wire,welding etc, flat iron fillet (for securing wire mesh/chanelling fencing) incl all necessary drilling riveting ,bolts etc. similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 24 | S&Fpre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 25 | S&Fpre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 26 | M & L for praparation of newly steel surface over 10 cm width or girth and applyingtwo coat of synthetic enamel paintover one coat of redoxide primer complete all as specified and directed |
| 27 | M&L for Chicken wiremesh (wt not less than 1.0 kg/sqm) fixed on junction of wall/ concrete slab, beam, column, chajja, facia etc under and above up to any height, fixedwith tinned tacks or galvanized wire staples/ nail/ clip etc and provinding necessary overlaps not less than 100mm, incl covered byplaster of 15mmthick 1:3 cement mortar, make sharp edge and smooth surface macthing with old surface, Cleanig of old concrete/ platered surface andapplying two coat weather proof exterior paint(apex)/OBD/cement base paint (of required colour) over a coat of primer complete all as specified and directed by engr -in- Charge. |
| 28 | Re-securing or easing and adjusting without taking down shutters of any descriptionexc. 1.0 sqm but n exc 2.0 sqm each complete all spcified and directed. |
| 29 | S&F in repair for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squaren exc 0.5 Sqm in each pane complete all as specified and directed |
| 30 | S&F in repair for 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as spfd and directed. |
| 31 | S&F in repair for s.s curtain railsminimum dia 25 mm, cromium plated includingbrackets, stops, rollers including fixing arrangement with drilling holes in wall brakets with screw etc completed all as specified and directed. |
| 32 | M&L welding in repairs exc.2.5 cm but n exc 5.0 cm in length and not exc 6.0 mm thick complete all specified and directed. |
| 33 | M&L for 18 to 20 mm thick Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and 15mm thick bedded in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite including Dismentling of stone slabs and tilesof any description or thickness in floors, approns etc,laid bedded and pointedin any mortarcomplete all as specified and directed. |
| 34 | S&F in repair bib tap long body with flange, fancy type,brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 35 | S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered \"Hot\" or \"Cold\" ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. |
| 36 | S&F in repair 15 mm dia brass chromium plated Stop valve, fancy type with or without lettered \"Hot\" or \"Cold\" ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. |
| 37 | S&F in repair PTMT bib tap long body with flange, fancy type, (minimum weight 120gms)with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 38 | S&F in repair PTMT piller tapwith flange, fancy type, (minimum weight 120gms)with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 39 | S&F in repair Waste coupling to WHB/kitchen sink of 32/40 mm diacomplete all as directed by Engr in Charge, |
| 40 | S&F in repair15 mm dia concealed stop cock fancy type chromium plated with long shank and cup complete all as specified and as directed.Make : Jaquar or equivalent in Parryware/Hindware. as approved by GE. |
| 41 | S&F in repair fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 42 | S&F in repair towel rail ,D type, brass, chromium plated,, fancy type,60 cm long between flanges fixed with and including CP brass screws, rawl plug etccomplete all as specified and directed. |
| 43 | S&F in repair PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors,wall fixing with catcher etc completed all as spfd and directed. |
| 44 | S&F PVC (SWR) bends any radius, with access door, for 75 mm bore of pipe. |
| 45 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, for 75 mm dia of outlet. |
| 46 | M&L for Cutting chases, pinningin making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm.complete all as specified and directed. |
| 47 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floorsinclluding Taking up or down existing GI tubing and connections, includingmaking good the disturbed surfacecomplete all as specified and directed. |
| 48 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing \"medium grade\" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including Taking up or down existing GI tubing and connections, includingmaking good the disturbed surface complete all as specified and directed. |
| 49 | S&F in repair Vitreous China urinals, half stall typewhite urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 50 | S&F in counter top wash hand basin coloured oval type 510x410X150 mm fixed over granite slab ofAppropriatesize including brackets, PVC connection waste pipe waste coupling etcall as specified andas directed . Maker Pryagor equivalentas approved by GE. Note Graniteslabwill bemeasuredand paidseparately |
| 51 | S&F in repair fancy type Single lever Basin mixer without popup waste system with 450 mm long braided hoses complete all as specified and as directed.Make : Jaquaror equivalent in Parryware/Hindware. as approved by GE. |
| 52 | S&F in repair PVC connection 15mm bore 450mm long with brass nuts and washers on both sides as complete as specified and as directed. Make : Jaquar or equivalent in Parryware/Hindware as approved by GE. |
| 53 | S&F in repairs fancy type chromium plated health faucet with 1.2 Mtr long flexible tube with wall hook, suitable for 15 mm bore pipe or for union and ABS wall hook incl making connection and fixed in positioncomplete all as specified and directed . |
| 54 | S&F in repair Soap dispensor with glass bottle complete all as specified and as directed.Make :Jaquar or equivalent in Parryware / Hindware as approved by GE. |
| 55 | S&F in repairtowel ring square complete all as specified and as directed.Make: Jaquaror equivalent in Parryware/Hindware as approved by GE. |
| 56 | S&F in repair stainless steel toilet roll holder with flap complete all as specified and as directed. Make: Jaquar or equivalent in Parryware/Hindware as approved by GE. |
| 57 | S&F in repairs, Wash down water closet pedestalfloor mounted pattern casecadeParryware or equivalent with dual flushing cistern complete all as specified and as directed.Make : Parryware Cat No.C0232/86 Closet , C0711 Cistern, C2054, C8300, C8016. or equivalentinHindware/Cera |
| 58 | M&L for fixed in repairs WC - wall hung ( Cat Part No-4525, Make:Prayagor Eqv) with integrated cistern, seat cover and twin flush systemivory colour ,incl seat cover , fixing bolts etc,complete all as specified and directed. |
| 59 | S&Fin repair chromium plated brass 2 Way Angle cock with flange Cat Part No:- 8510, Make: Prayag or Eqv) complete screwd down for15 mm GI bore pipe complete all as specifed and directed. |
| 60 | S&F in repair bathroom Cabinet and With mirror (Cat Part No-555, Make:Prayagor Eqv of ) complete all as specified and directed |
| 61 | S&Fin repair for central hole basin mixer (Cat No. 6350 N, Make: Prayag or Eqv), 15 mm fancy type fixed in repairs complete all as specified and directed. |
| 62 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and over head shower complete with wall flange (without hand & over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed (Cat No:9380, Make: Prayag or eqv) |
| 63 | S&F Looking Mirror with PVC or wooden frame as desiredMake:Atul, Modiguard or Saint Gobain) complete all as specified and directed. |
| 64 | M&L French polishing on wooden surfaces of any description, over 10 cm width or girth including cleaning & preparing the surface including a coat of wood filler on old works with one or more coats complete all as spfd directed. |
| 65 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC long bendflush pipe 32 mm borecomplete all as specified and directed by engr-in charge.. |
| 66 | S&F in repair Rotational moulded polyethene water storage tank( cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltr including dismantling of existing water tankand connecting to outlet GI 20mm dia pipe including fitting complete all as spfd and directed by enginr-in-charge. |
| 67 | Dismantling mild steel work of any description complete all as specified and directed. |
| 68 | Demolition Reinforced cement concrete (reinforced)in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 69 | M&L Providing cover slab 1:2:4 type B 1 using 20 mm graded aggregate set in cement mortar 1:6 as in cover slab including placing in position complete all as spfd and directed (Note : - reinforcement shall be measure and paid separtely under respective item of sch A). |
| 70 | M & L for TMT 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beam and Fdn, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified & directed. |
| 71 | Excavation in post holes each n.exc 0.5cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed in layers n.exc 25 cm and covering and removal of surplus soil n.exc 50 m and making good surface complete all as specified and directed. |
| 72 | Dismantling fencing wire mesh any type complete all specified and directed. |
| 73 | S&F MS galvanished chainlink fencing (Weight Not exc 4 Kg per Sqm / as approved by GE ), rail straining bolts, tec incl provissionof binding wire,of any description complete all as spfd and directed. |
| 74 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, manholes, etc n.exc 10 Sqm plan and getting out in soft/loose soil complete all as specified and directed. |
| 75 | Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm using soils complete all as specified & directed. |
| 76 | Removal of surplus excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point as in soft/loose soil complete all as specified and directed. |
| 77 | M&L in Concrete bed to drain pipes ( bore of pipes is 150 mm)including packing under and completely surrounding pipes with concrete after they are laid and tested in complate all as specified and directed. |
| 78 | S&F in 110 mm dia PVC (SWR ) pipes single socket in any length laid in trenche , drain wall or in floors completes all as specified and directed. |
| 79 | S&F Reinforced concrete pipe,bore of pipe 150mm , class NP2, laid and jointed complete with collers completed all as specified and directed. |
| 80 | Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed. |
| 81 | Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 500 & n exc 1000 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed. |
| 82 | M&L for Cleaning of septic tank up to 25 users by removing sludge in semi solid sate or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5 km but n exc 2 KM out of MOD land and buriedinto groundby digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 83 | M&L for Cleaning of septic tank exc25 users and not exc 50 usersby removing sludge in semi solid sate or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5 km but n exc 2 KM out of MOD land and buriedinto groundby digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 84 | M&L for Cleaning of septic tank exc 50 users and n.exc 100 usersby removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buriedinto groundby digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 85 | M&L for Cleaning of septic tank exc 100 users and n.exc 200 usersby removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buriedinto groundby digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 86 | M&L for Dewateringof soak well or sewage of any dia and depth manully or by using pumps and rremoval of sludgeif any to a distance exc1.5km but not exc 2Km out of MOD land and buriedinto groundby digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 87 | M&L for cleaning with suitable chemical of P/S trap of EWC/IWC etc by removingall blockage of any descriptionin any situation in thesystem and removal of sludge in semi solid state or liquidstate by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buriedinto groundby digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 88 | M&L forcleaning of Nahani/floortrap of Bath/kitchen/urinal/ wash basin incluingIst gully trap etc by removingall blockage of any descriptionin any situation in thesystem and removal of sludge in semi solid state or liquidstate by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buriedinto groundby digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 89 | M&L forcleaning of Sewage pipe line from gully trapto ISt manholean then upto the final drop into the septictank an soak well /cess pool (except intermediatemanholes ) by removing all blockageof any description in any situationin the system completeany ia of pipe an epthby rodding ,manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buriedinto groundby digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornmentcomplete all as specified and directed. |
| 90 | M&L forcleaning of manholes any type & size and any depthby removingof sludge in semi solid state or liquidstate by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buriedinto groundby digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 91 | Taking down of any chowkats or frame ( wooden, steel, aluminium. Press steel, pvc etc.) with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exe 4.00 Sqmeach complete all as specified and directed. |
| 92 | S&F powder coated aluminium sliding window threetrack with two glass shuttersincl fixing 4.8 mm thick plain glass, and one wire meshshutter with and including stainless steel wire gauge cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium power coatet sections, aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etccomplte fittings as approved. Note Size of aluminium section shall beunder :-(i) Threetrack top and vertical - Jindal main-2010 section No 20829 or equivalent (ii)Three track bottom- Jindal main-2010 section No 20830 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent (v) Shuttervertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent |
| 93 | M&L for repair of oldAnodisedaluminium/Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, with extruded built up standard tubular sections/ appropriate Z sections and other sections includingtaking down and refixing in same opening of door shutter or frame/ chowkhat n exe. 3.0 sqm,fixing with dash fasteners of required dia and size, hinge 150 mm size, 02 no of aluminium door handle, required necessary tower bolt, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge. Note:- Required glass, Double action floor springhydraulically regulate, automatic hydraulic door closer, mortic lock for aluminium door shall be paid separately complete all as directed. |
| 94 | M&L for repair of old Anodisedaluminium/Powder coated aluminium (minimum thickness of powder coating 50 micron) work for window( double/three track), ventilator with shutter, and partition (fixed portion), with extruded built up standard tubular sections/ appropriate Z sections and other sections includingtaking down and refixing in same opening of window, ventilator, and partition orshutter,frame/ chowkhat n exe. 1.50 sqm,fixing with dash fasteners of required dia and size, hinge 150 mm size, 02 no of aluminium door handle, required necessary tower bolt, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge.Note:- Required glass shall be paid separately complete all as directed. |
