Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-02-2026 | Changes in critical dates | Date | 09-03-2026 |
| 2 | 25-02-2026 | Changes in BOQ and Schedule of Credit | BOQ | 09-03-2026 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and paving\"s n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | Removing building materials to distance exc 1.00 Km but not exc 1.5 Km and depositing where, complete all as specified and directed. |
| 4 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 5 | M&L for brick work with sub class \"B\" old size bricks straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 6 | M&L for brick work with sub class \"B\" old size bricks straight or curved on plan to anyradius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed. |
| 7 | M&L for 25mm thick PCC 1:2:4, type B-0, as in sub base of floor using 12.5mm graded crushed stone aggregate, finished even & fair without using extra cement complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete in roofs, floors, beams, chajjas, staircases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed. Note: The work is required to be carried out in buildings up to triple storyed, contractor will make arrangement for scaffolding etc, adequate arrangement for safety and security of labours shall be made by contractor and the cost of all above shall deemed to be included in the rates quoted by the contractor and nothing extra shall be admissible. |
| 9 | M&L for TMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia, complete all as specified and directed. |
| 10 | M&L for TMT steel bars 5mm dia and over up to and including 10mm dia in stirrups, spacers etc, cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and directed. |
| 11 | M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surfaces of concretecomplete all as specified and directed. |
| 12 | M&L for reinforced cement concreteM-25 (Design Mix) using 20mm graded crushed stone aggregate as inpillars, posts, struts, piers, columns and stanchionscomplete all as specified anddirected. |
| 13 | M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 14 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surfaces of concrete, complete all as specified and directed. |
| 15 | M&L forformwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and directed. |
| 16 | Formwork to soffits ofsuspended slabs such roof slab, floor slabs, landings and similar work not exceeding 20 CM thick (horizontal or sloping) flat for rough finished surfaces of concrete , complete all as specified and as directed. |
| 17 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 18 | M&L for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 andfinishedeven and fair without using extra cement complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar 1:4including mixing water proofing compound @ 2% by weight of cement or as per manufacturer\"s instruction and finished fair and even without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 20 | M&L for preparation of old plastered surfaces and removing existing treatment on walls and applying two coat oil bound distempering over a coat ofa coat of alkali restant primer andwith wall care putty (3mm thick), complete all as specified and directed. |
| 21 | M&L for preparation ofnewly plastered surfaces of walls and applying two coat oil bound distempering over a coat ofa coat of alkali restant primer andwith wall care putty (3mm thick), complete all as specified and directed. |
| 22 | Supply only Integral water proofing compound, complete all as specified and directed. |
| 23 | M&L for finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all as specified and directed. |
| 24 | M&L for vitrified ceramic dark shade tiles 10mm thick (square/ rectangular) polished, area of each tiles exceeding0.42 sqm, in vertical surfaces as in dado, skirting etc set and jointed in 3mm thick polymer modified adhesive and pointed in white cement to match, complete all as specified and directed. |
| 25 | M&L for non skid ceramic coloured tiles 7 to 8mmthick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mmthick screed bed with cement mortar 1:6 all as specified |
| 26 | M&L for exterior stone craft finish ceramic cladding/elevation tiles joint free in vertical surfacesof size 300x600x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over10 mm thick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 27 | M&L for glazed ceramic coloured tiles 300x600x7-8mmthick vertical surfaces, as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 28 | M&L for vitrified ceramic tiles 10 mm thick of light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 20mmthick screed bed with cement mortar 1:6, complete all as specified and directed. |
| 29 | M&L for vitrified ceramic tiles 10 mm thick of light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mmthick screed bed with cement mortar 1:6, complete all as specified and directed. |
| 30 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed. |
| 31 | M&L for chequered cement concrete tiles 300x300x22-25mm thick, with grey cement and pigment set, jointedand pointed in neat cement slurry in floors including over Screed bed or bedding layer of mortar 15 mm thick 1:6 CM for laying floor finishes, complete all as specified and directed. |
| 32 | M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingincluding 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 33 | M&L for 18-20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over 10mm thick cement plaster screed 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 35 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. |
| 36 | S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framing (beam, tee, angle, gusset plate, channel or flat section including distance pieces, cleats etc, structural steel confirming to Fe-410w, Gde-250, quality- \"A\", complete all as specified and directed. |
| 37 | M&L for steel work in tubular trusses, columns, purlins and rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed. |
| 38 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board, valley gutter etc, fixed all as per manufacture\"s instructions, fixed with self tapping screws as directed, at site with suitable arrangement as required, complete all as specified and directed. |
| 39 | S&F framed work as in steel gate in (ornamental and intricate design) such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe 290.Gde -E-165, including all fittings and fixtures etc., complete all as specified and directed. |
| 40 | M&L for rounding to edges of stone slabs one edge, such as in, cooking platform, and other similar situations, complete all as specified and directed. |
| 41 | M&L for PCC 1:2:4, type C-1, using 20mm graded crushed stone aggregate as in block for hold fast block lintle, slab, coping or similar work and finished the surface with existing and including form work, complete all as specified and directed. |
| 42 | M&L for decorative laminate 1.5mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 43 | Dismantling wall, ceiling and floor boards (fiber, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, GI grid/ wooden frame work, complete all as specified and directed. |
| 44 | M&L for 2nd class softwood plain fillets 25 Sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed. |
| 45 | S&F false ceiling with semi perforated 12 mm thick micro tegular edgedat all hights with GRG(glass fiber reinforced gypsum ) false ceiling tiles of size 595mmx595mm of approved texture ,design and pattern having moisture content less than 2% ,humidity resistance of 99%, NRC 0.5 to 0.75 as per IS 8225-1987, noncombustible as per BS475 (part-4) -1970 and light code description unit rate No. 429 SUB HEAD: 26.0 new technologies and material reflectance of 85% (minimum)to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 gms per sqm including both sides ) comprising of main -T runners of size 15x32mm of length 3000mm ,cross Tof size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600 mm to form grid module of size 600x600mm ,suspended from ceiling using galvanised mild steel items (galvanising @80 gms per sqm ) i.e., 50mm long ,8 mm outer diameter M-6 dash fasteners ,6mm dia fully threaded hanger rod up to 1000mm length and L- Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angleof size 24x24x0.4mm of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws, complete all as specified and directed. |
| 46 | S&F 9 mm thick plywood grade BWR type BB fixed with screw to timber frameas in wall paneling, complete all as specified and directed. |
| 47 | M&L for 2nd class soft wood, plain fillets exc 6 cm n exc 13 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed. |
| 48 | M&L for chamfers, splays, grooves, rebates, rounded angles, rounded nosing\"s, tongued and grooved edges (each tongue and each groove measured) etc., moldings n exc 75mm girth on softwood, complete all as specified and directed. |
| 49 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 50 | S&F 75mm brass handle ,fancy type anodized as cupboard fixed with brass screw, bright finished complete all as specified and directed. |
| 51 | S&F Brass handles 150 mm, fancy type, polished bright, complete all as specified and directed. |
| 52 | S&F Butt hinges, 100 mm cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed. |
| 53 | S&F Brass Locks, cupboard, grade I, size 50mm 4 lever complete all as specified and directed. |
| 54 | S&F 4 lever Brass Mortice lock, vertical type, size 100 mm, complete all as specified and directed. |
| 55 | S&F Aluminum extruded sec body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 56 | S&F continuous (piano) hinges 40 mm, brass, bright finish or electrogalvanised complete all as specified and directed. |
| 57 | M&L for second class hard-wood clean swan timber framed/ cupboard/ window/ doorchowkhat and fixed in repair complete all as specified and directed. |
| 58 | Taking down chowkats or frame with shutter, n exc. 1.50 Sqm each (without taking off shutters from the frame), including making good disturbed surface, complete all as specified and directed. |
| 59 | Taking down chowkats or frame with shutter, exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frame), including making good disturbed surface, complete all as specified and directed. |
| 60 | S&F mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0, complete all as specified and directed. |
| 61 | S&F solid PVC frame (single rebated) of size 60mmx30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.Note:- i) Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 62 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. |
| 63 | S&F factory-made uPVC sliding door, white in colour, fabricated from extruded profiles with wall thickness of 2.3mm ± 0.2mm. The profiles shall be of multi-chamber hollow section design and include the following specifications:Frame size: 60mm x 58mmSliding sash size: 60mm x 78mmInterlock section (between two sliding shutters): 60mm x 74mmGlazing bead: 35mm x 20mm, miter cut and fusion welded at all corners. The system shall include provisions for drilling holes for hardware installation and water drainage, and appropriate arrangements for smooth sliding operation. Gaskets: EPDM gaskets of thickness 1.2mm ± 0.2mm, Steel Reinforcement (galvanized):Frame: 28mm x 21.5mm Sash: 31mm x 27mm, Interlock: 27mm x 17mm, Galvanized steel reinforcements shall be inserted in all necessary profiles for structural stability. The frame shall be fixed to the wall using 8mm x 100mm long fasteners. Hardware to include:Sliding door handle (zinc alloy, white powder-coated) Sliding rollers (heavy-duty, smooth operation) Locking system (hook or crescent type with multipoint locking optional)Aluminium track or stainless-steel rail for bottom sliding Stoppers, bumpers, and anti-lift locks as required Glazing: 5mm thick clear float glass (or as approved) to be fixed using appropriate glazing bead and EPDM gaskets, to be paid separately. |
| 64 | S&F factory made uPVC any colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories such asDoor Espag, Lever Door Handle, Standard Cylinder, Centre Striker, 3D Hinge, Striker, Drainage, Glazing Bridge, Silicon Sealant etc for area more than 2.00 Sqm (net opening), complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose. |
| 65 | S&F factory made uPVC any colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories such asDoor Espag, Lever Door Handle, Standard Cylinder, Centre Striker, 3D Hinge, Striker, Drainage, Glazing Bridge, Silicon Sealant etc., complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 66 | S&F factory made uPVC any color (area exceeding 2.00 sqm each) Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow sectionwith multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock, complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose for Areaexceeding 2.00 sqm each. |
| 67 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm fitted with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 68 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed. |
| 69 | S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed. |
| 70 | Dismantling water tanks of capacity exceeding 500 liters but not exceeding 1000 liters, complete all as specified and directed. |
| 71 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 liters capacity, ISI marked, double layered, marked embossed, hoisted and fixed in position including connecting up pipes, complete all as specified and directed. |
| 72 | S&F 20mm ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 73 | Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 74 | Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 75 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed. |
| 76 | M&L for 15mm mild steel galvanised tubing medium grade galvanised ISI marked with all fittings such as bends, elbows, tees, short pieces, connections, back nuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors, complete all as specified and directed. |
| 77 | M&L for 20mm mild steel galvanised tubing medium grade galvanised ISI marked with all fittings such as bends, elbows, tees, short pieces, connections, back nuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors, complete all as specified and directed. |
| 78 | Refixing 15mm bore old Steel water tubing and connectionsof all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 79 | Refixing 20mm bore old Steel water tubing and connectionsof all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 80 | S&F in repair 20 mm dia gun metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 81 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm long, complete all as specified and directed. |
| 82 | S&F for 32mm dia Low density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls. Ceilings or in floors etc., complete all as specified and directed. |
| 83 | Dismantling of cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches/ floor/ wall if required of100mm dia, complete all as specified and directed. |
| 84 | Dismantling of cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches/ floor/ wall if required of75mm dia, complete all as specified and directed. |
| 85 | S&F 100 mm dia (sand cast) cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 86 | S&F 100mm dia (sand cast) cast iron soil,waste and vent pipes, in any length with or without ears with cement joints, fixed in walls complete all as specified and directed. |
| 87 | S&F 75mm bore sand cast pipe cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix to wall, complete all as specified and directed. |
| 88 | S&F 75mm bore sand cast pipe cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed. |
| 89 | S&F 100 mm bore cast iron Bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 90 | S&F 75 mm bore cast iron Bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 91 | S&F in repair branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches 100 mm bore with oval access door, complete all as specified and directed. |
| 92 | S&F 750 mm dia cost iron Single \"Y\" junctions laid and jointed, complete all as specified and directed. |
| 93 | S&F in repairs cast iron cowls of 100 mm dia, complete all as specified and directed. |
| 94 | S&F in repairs cast iron cowls of 75 mm dia, complete all as specified and directed. |
| 95 | S&F in repair stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe, complete all as specified and directed. |
| 96 | S&F in repair stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof 75mm bore of pipe, complete all as specified and directed. |
| 97 | S&F in repair cast iron floor trap with SS grating incl jointing to waste pipe fixed in cement concrete type B-I (1:2:4) 75 mm dia, complete all as specified and directed. |
| 98 | M&L for preparing oldwood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint on old wood or wood based surfaces, complete all as specified and directed. |
| 99 | M&L for preparing for two coats of synthetic enamel painting over a coat a of red oxide primer on new steel surfaces exc 10cm width or girth incl preparation, complete all as specified and directed. |
| 100 | M&L for preparing for one coats of synthetic enamel painting over prepared old steel surfaces exc 10cm width or girth incl preparation, complete all as specified and directed. |
| 101 | S&F brass CP kitchen sink mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe, complete all as specified and directed. |
| 102 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortar to dwarf wall to cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings i.e. CP waste coupling, waste pipe complete all as specified and directed. |
| 103 | M&L for PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed. |
| 104 | M&L for complete removal of existing treatment of plastered or unplastered old decorated surface walls by brooming down and applying two coat of weather proof anti fungal exterior emulsion painton external surfaces including a coat of alkali resistant priming paint at any height of building/ tower complete all as specified and directed. |
| 105 | M&L for preparation of newly plastered surface of wall applying two coat of weather proof anti fungal exterior emulsion paint on external surfaces includinga coat of alkali resistant priming paint with 2mm wall care putty, complete all as specified and directed. |
| 106 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges ,flashing, eaves board, valley gutter etc, fixed all as per manufacture\"s instructions, fixed with self tapping screws and covered with silicone sealant as directedat site with suitable arrangement as required, complete all as specified and directed. |
| 107 | S&F seasoned Pine Wood Ceiling using solid pine wood planks of minimum 8 feet length, having a thickness ofnot less than 12 mm and width of 100 mm to 150 mm, as per approved design. The pine wood shall be kiln-dried to a moisture content of 10 - 12% and shall be free from warping, cracks, sapwood, insect infestation, and knots larger than 10 mm. Planks shall be machine-planed on all sides with tongue and groove joints or shiplap joints, if specified and fixed over a pre-installed wooden or metal framework using approved screws, nails, or concealed fasteners. The ceiling shall be polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer, including all sanding and surface preparation to achieve a smooth and uniform finish.Rate to include: (a)Supply of seasoned pine wood planks. (b)Surface treatment, polishing materials, and labor (c)Fixing hardware (d)Skilled labour, scaffolding, and all incidental works.Note: Frame work shall be measured and paid separately. |
| 108 | S&F 4 mm thick veneered decorative teakplywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws/ adhesive solutionto plywood/flush door shutter and necessary melamine polish as in wall paneling complete all as specified and directed. |
| 109 | S&F 25 mm thick flush shutters, solid core construction, with block board core and 4mm plywood face panels, commercial type both face is covered with decorative face veneer(Melamine polish 2 coats) with 1st class hardwood lipping/ frame to match complete all as specified and directed.Note:- Melamine polish rate deemed to be included in the quoted rates. |
| 110 | M&L for 18 mm thick one side decorative lamination and other side balancing white sheet consisting of carcass 18mm thick PVC sheet fixed with approved adhesive and shelf tapping screws incl all accessories for fixing of shelves, cabinets etc., complete all as specified and directed. |
| 111 | M&L for 6mm thick one side decorative lamination and other side balancing white sheet consisting o carcass fixed with approved adhesive and shelf tapping screws, complete all as specified and directed. |
| 112 | M&L for 18mm wide and 1 mm thick PVC Edge bending to paste on edge of PVC shelfs, cabinets etc with suitable adhesive complete all as specified and directed. |
| 113 | S&F Magnet catcher as approved by Engr-in-charge and fixed with brass screws & washers in cupboard PVC shutters complete all as specified and directed. |
| 114 | S&F Brass sliding door bolt 300 mm long , fancy type, polished bright complete all as specified and directed. |
| 115 | S&F 6 mm Toughened (Tempered) Glass Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.Type: Single toughened glass (heat-treated)Standard: Conforming to IS: 2553 (Part 1): 2018Application: Full-height doors, sliding doors, partitions, or safety-critical areasFeatures: High impact resistance, shatter-safe behavior, suitable for high-traffic areasEdges: Polished or chamfered as required |
| 116 | S&F in repair stainless steel 25mm dia drapery rods for curtains incl stainless steel decorative end knobs and brackets (wall to wall or flush to wall) for securing curtain rod fixed with PVC rawl plug with ss screw complete all as specified and directed. |
| 117 | S&F galvanised mild steel pan mortar(Tasla) 21-22 inch dia not less than1mm thickwith for04 Nos bolt of 5-6mm dia with 8 Nos nut bolt including fixing on water storage tank as tank cover complete all as specified and directed. |
| 118 | Dismantling of existing steel/wooden railing, complete all as specified and directed. |
| 119 | S&F tubular stainless steel railing/ grill with top knobs including welding invertical/horizontal includingwith special shape washers etc and fixing in concrete surface, complete all as specified and directed. |
| 120 | S&F in repair two way brass CP bibcock with wall flange50 to 65mm long (facilitate to fix the Health faucet) 15 mm dia boretype withhandle, screwed down, screwed for iron pipe or female of quarter turn type complete all as specified and directed. |
| 121 | S&F 15mm dia wall mixer (hot and Cold) 3 in 1 (Provision for over head shower and hand shower) with extended spot typewith 450mm braided connection pipe (Without POP UP), complete all as specified and directed. |
| 122 | S&F in repair health faucet (ABS Body) with 8mm dia 1.00 m long flexible tube (PVC/ stainless steel coated) and wall hook complete all as specified and directed. |
| 123 | S&F vitreous china wash down water closet pan (pedestal pattern) white/ coloured cascade type 640x360x690 (monolithic flush cistern type) single piece wc with PP seat cover, Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions, complete all as specified and directed.Make: Jaguar Model No: SLS WHT-6853S/ CERA Cat No: S1013132 or equivalent as approved. |
| 124 | S&F in repair brass CP Angle /Stop cock with long shank and cupwith wall flange 15 mm dia borescrewed down with crutch handle both end screwed for iron pipe or union, complete all as specified and directed. |
| 125 | S&F CP Toilet paper holder with flap cover fixing with all necessary arrangements screws etc.., complete all as specified and directed. |
| 126 | S&F 15mm dia wash hand basin mixer (hot and cold) with extended spot typewith 450mm braided connection pipe (without pop up), complete all as specified and directed.Make: CERA Cat No:F 3002581/ Jaguar Cat NO:CQT-233321B and equivalent as approved. |
| 127 | S&F soap dispenser push button model capacity 0.8 ltr of ABS body fixed all as per manufacturing instructions complete all as specified and directed. |
| 128 | S&F CP towel rack 600mm long with out hangers and with lower hanger including with all fixing arrangements complete all as specified and directed. |
| 129 | S&F 600mm long glass shelf with ss railingincluding with all fixing arrangements complete all as specified and directed. |
| 130 | S&F looking mirror(900x600x6 mm) with frame complete all as specified and directed. |
| 131 | S&F stainless steel 200 mm overhead shower with 450 mm long arm crome finish with rotating connector the swivel ball design in connector allows to adjust the angle of the head in 360 degree complete all as specified and directed. Make:- CERAor equivalent as approved. |
| 132 | S&F in repair vitreous China wash basin pedestal pattern super white/ colour of size 560x475mm including all fittings complete, decorative type, complete all as specified and directed. |
| 133 | Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 134 | M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC casing capping/ conduit 25mm size with all fittings and accessories, terminated to PVC board of suitable size for housing/ mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and as directed. |
| 135 | All as per Srl Item No 134.00 above but for one 3 pin socket outlet 5 amps, onindependent board, complete all as specified and directed. |
| 136 | All as per Srl Item No 134.00 above but for one 3 pin socket outlet 5 amps, onsame board with other switches, complete all as specified and directed. |
| 137 | All as per Srl Item No 134.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS-H PVC insulated unsheathed multistranded copper conductor cable and with 2.5 Sqmm FRLS-H, PVC insulated unsheathed multistranded copper conductor as earth wire, complete all as specified and directed. |
| 138 | S&F in repair Modular switch 1 way 6 A, module complete all as specified and as directed. |
| 139 | S&F in repair Modular switch 1 way 16 A, module complete all as specified and directed. |
| 140 | S&F in repair Modular Bell push 6 A, 1 Module complete all as specified and directed. |
| 141 | S&F in repair modular Socket, 6A-2/3 pin combined 2 module complete all as specified and directed. |
| 142 | S&F in repair modular Socket, 6A/16A-2/3 pin combined 2 module complete all as specified and directed. |
| 143 | S&F in repair white cover plate with frame 1 Module complete all as specified and directed. |
| 144 | S&F in repair white cover plate with frame 2 Module complete all as specified and directed. |
| 145 | S&F in repair white cover plate with frame 3 Module complete all as specified and directed. |
| 146 | S&F in repair white cover plate with frame 4 Module complete all as specified and directed. |
| 147 | S&F in repair white cover plate with frame 6 Module complete all as specified and directed. |
| 148 | S&F in repair white cover plate with frame 8 Module complete all as specified and directed. |
| 149 | S&F for Metal flush box 1 module complete all as specified and directed. |
| 150 | S&F for Metal flush box 2 module complete all as specified and directed. |
| 151 | S&F for Metal flush box 3 module complete all as specified and directed. |
| 152 | S&F for Metal flush box 4 module complete all as specified and directed. |
| 153 | S&F for Metal flush box6/8 module complete all as specified and directed. |
| 154 | S&F for telephone socket, complete all as specified and directed. |
| 155 | S&F for TV socket, complete all as specified and directed. |
| 156 | S&F for telephone wire 2 pair, complete all as specified and directed. |
| 157 | S&F for cable TV co axial cable, complete all as specified and directed. |
| 158 | S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked), complete all as specified and directed. |
| 159 | S&F LED batten with fixture, 1x 20 watt, (4 Feet) wall mounted, with PC housing and diffuser, IP20 complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.Make: HPL Cat part No: HPLLEDINVT5BPC20CW/ Havells/ Bajaj or in equivalent as approved |
| 160 | M&L for lamp holder (Angle) PVC/Polycarbonate type with back plate suitable for batten/ bulb fittings incl 12 watt LED Bulb, complete all as specified and directed. |
| 161 | S&F 12 watt LED Lamp, complete all as specified and directed. |
| 162 | S&F LED building security light 25 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 163 | S&F LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 164 | S&F LED mirror light wall light fancy fitting 10 watt, wall mounted PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed. |
| 165 | S & F LED light fitting 9/10W bulkhead luminaire including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unsv existing fittings complete all as specified and directed. |
| 166 | S&F in replacement of Bed side lamp decorative, E-27 screw type holder with 0-2 watt bulb suitable for bedroom, study room, complete all as specified and directed. |
| 167 | S&F in replacement 36/40W LED (Size 2\"x2\") square shapedRecess mounting type luminaire having white polycarbonate body & Alumium heat shrink with PMMA diffuser, 5700Kincluding connecting three core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed.Make: Havells cat part No. VENUSNEO2X2PLR36WLED83OG2 or equivalent as approved. |
| 168 | S&F in repair Surge protection device (SPD) Voltage protection level Up up to 1.3 kV, suitable for protection of all terminal equipments Both Common & Differential Mode Protection complete all as specified and directed.Make: Havells, SKU: DHSA2NAN40320 SP+N. |
| 169 | S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arrangements complete all as specified and directed. |
| 170 | S&F in repair exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metal body with louver including fixing all arrangements complete all as specified and directed. |
| 171 | Refixing AC single phase static energy meter and three phase of existing with transparent hinge type box including taking down and re-fix the same, complete all as specified and directed. |
| 172 | M&L for submain wiring with 2X6.0Sqmm+1X6.0Sqmm Earth Wire single core PVC insulated FRLS-H PVC sheathed cooper cableconnecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement and direction by EIC, with all accessories complete including taking down to old u/s all as specified and directed. Note: Three runs of copper wire for phase , neutral, earth & one run PVC conduit/ casing shall be measured one unit length, complete all as specified and directed. |
| 173 | S&F sheet metal enclosure MCB DB 12 waySPN double door suitable for 240V fixed flushed on walls including cutting Knitch and making good disturbed surfaces, incl taking down existing, complete all as specified and directed. |
| 174 | S&F MCB SP (single pole) 06 to 32 Amps, \"B\" Curve with 10 kA for inductive load connected through cable lugs of suitable size, incl taking down existing, complete all as specified and directed. |
| 175 | S&F MCB SPN/ DP (single pole and neutral) 40/ 63 Amps \"B\" Curve with 10 kA for inductive load connected through cable lugs of suitable size, incl taking down existing, complete all as specified and directed. |
| 176 | S&F MCB TPN 415 volts 40/ 63 amps for inductive loadconnected through cable lugs of suitable size, complete all as specified and directed. |
| 177 | S&F sheet metal enclosure MCB DB 4 way,VTPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed. |
| 178 | S&F 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA connected through cable lugs of suitable size complete all as specified and directed. |
| 179 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 liter, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc., complete all as specified and directed. |
| 180 | S&F 15/20 Amp Socket with 16/ 20 Amp MCB with metal box combinations (ISI marked) flush type universal, complete all as specified and directed |
| 181 | Supply, fixing and commissioning of electrical chimney width 90 cm (90 IN) auto clean, curved glass, filter less, touch control, motion sensor, energy efficient LED light, powerful suction wall mounted, black colour 1350 CMH, complete all as specified and directed |
| 182 | S&F two core PVC aluminium conductor cable 1100V grade ISIsize 6 Sqmm, complete all as specified and directed. |
| 183 | M&L for earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less \"than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including galvanised strip protected by 32 mm bore light grade galvanised iron pipe and earth and connected to test point as directed including funnel, watering pipe 20 mm bore light grade galvanised iron wire mesh charcoal and common salt in alternate layers of 15 cm compacted thickness all around the GIelectrode with concrete pit in PCC 1:3:6 type C1includingnecessary excavation in soft/loose soil and disposal of soil to a distance not exc 50 m and necessary testing completeconnected to earthing test point complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
