Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking downcement or cement lime plaster of any description on brick, block or stone walls etc (at any height) including racking out joints, hacking for key scrubbing down with water etc complete & removing debris outside MD land as directed. |
| 2 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement etc complete all as specified and as directed. |
| 3 | M&L for 15mm thick plaster in CM 1:4 (using water proofing liquid as per manufacturers instructions) on other than fair faces of brick work masonary surface or concrete surface finished even and fair without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | S&F chicken wire mesh having 10 mm aperture and 0.63 mm diafixed to Ceiling/wall surfaces with nails and welded with reinforcement complete all as specified and as directed. |
| 6 | M&L for cutting chases in walls for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and making good, cutting exc 10 cm girth and not exec 20cm girth completeall as specified and as directed. |
| 7 | M&L for brickwork with fly ash bricks, straight or curved on plan, exc 6m mean radius,built in cement mortar 1:6including demolition of existing brick work built in cementor cement lime mortarof any description complete all as specified and as directed. |
| 8 | M&L for brickwork with fly ash bricks, straight or curved on plan, exc 6m mean radius,built in cement mortar 1:6 complete all as specified and as directed. |
| 9 | M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 with and including demolition of existing brick work built in cement or cement lime mortarof any description complete all as specified and directed. |
| 10 | M&L for preparation of new plastered internal surfaces of wall and applying two coat ofacrylic distemper of required shade and colour complete including one coat of primeras per manufacturer\"s specifications in any colour complete all as specified and directed. |
| 11 | M&L for newly plastered wall surfaces, preparation of surface and applying two coats of 100% premium exterior acrylic emulsion paint (weather coat) alkali & fungal resistance, dirt resistance of required shade over and including priming coat of exterior primer complete all as specified and as directed. |
| 12 | M&L for preparation of new plastered surfaces of ceiling and applying three coat ofwhite wash complete all as specified and directed. |
| 13 | M&L for applying 1.5 mmthick of Birla/ JK wall care putty in new or old decorated surfaces of walls and sanding the surfaces till smooth finish is obtained for receiving finishes complete all as specified and as directed |
| 14 | M&L for Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified . |
| 15 | M&L for complete removal of existing treatment on old decorated plastered suface of externalwalls & applying two coats ofExterior Acrylic Emulsion paint over one coat of primer including filling cracks using acrylic wall crack filleras requiredcomplete all as specified & directed by Engr in charge. |
| 16 | M&L for preparation of new surfaces and applying waterproof wall care putty, over prepared surfaces (thickness vary from 1.5 to 2mm) as required for desired smoothness and levelling of surfaces in two or more layers)including sanding of the putty surface after drying to achieve even and smooth finish for receiving painting complete all as specified and as directed by Engineer-in-Charge |
| 17 | M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on oldcomplete all as specified and directed. |
| 18 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removingrubbish off the premises all as specified and directed. |
| 20 | M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tile exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 21 | M&L for Vitrified double charge tiles 8 to 9 mm thick ( square /Rectangular)area of each tile exceeding 0.18 sqmbut not exc 0.38 sqm (600x600mm)in floors etc set and jointed in neat cement slurryand pointed inwhite cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 22 | Ditto all as per itemNo 21.00 above but as in skirting set and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 23 | M&L for glazed coloured ceramic tiles in vertical surfaces as dado of size450x300x6-7mm, thick set and jointed in neat cementand pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on other than fair faces of brick work etc complete all as specified & as directed.Note: Color, size and shade shall be as approved by Engineer-in-charge |
| 24 | Dismantling kota, granite, cudappa stone slabsand interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed. |
| 25 | M&L for machine cut Kota stone flooring 18 to 22 mm thick(size of kota stone slab 22\"x22\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 26 | All as per item No. 25 here-in-beforebut 15-18 mm thick as in risers to steps andskirtinglaid over and including backing coat of 10mm thick cement mortar 1:3all as specified and as directed.Note : Riser provided to steps shall be in one piece. |
| 27 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 28 | M&L for 75mm thick plain cement concrete 1:4:8type D-2, using 40 mm graded stone aggregate as in sub base of floors and pavingsall as specified and as directed. |
| 29 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 30 | M&L for 60mm thick, factory made, chamfered edge, cement concrete interlocking paver blocks (glossy/ rubber matt finish) of M-35 grade with approved colour, design & pattern of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks asrequired size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.Note : Size, shape, pattern and shade shall be asapproved by Engineer-in-Charge. |
| 31 | M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in copings, PCC band,in sides of interlocking tiles, slightly rounded or chamfered angles and throating and similar work including necessary formwork complete all as specified and as directed. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and asdirected. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and asdirected. |
| 34 | Taking down shutters of any description area exc 1 sqm & n.exc 2 sqm each leaf and complete all as specified & as directed. |
| 35 | S&F pressed steel doors frames of size 125 mm x60 mmwith one or more rebates including necessary fixing lugs, hold fasts, hinges,lock strike plate, etc. including filling with PCC 1:3:6 type C0 complete as specified and as directed. |
| 36 | S&F pressed steel doors frames of size 105 mm x60 mmwith one or more rebates including necessary fixing lugs, hold fasts, hinges, lock strike plate, etc. including filling with PCC 1:3:6 type C0 complete as specified and as directed. |
| 37 | M&L for PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in coping on top of wall,bed blocks for hold fasts, including necessary formwork complete all as specified and as directed. |
| 38 | S&F 35 mm thick flush shutters, factory made, solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and as directed. |
| 39 | S&F 35mm thick IInd class hard wood glazed skelton shutters,factory made,open rebated and prepared to recive glass,guage etc,(with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat complete all as specified and as directed. |
| 40 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges shall be paid separately under respective item. |
| 42 | S&F powder coated anodized aluminium frames for door, window, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.Note:- Colour shall be as approved by GE/Engineer-in-Charge. |
| 43 | S&F in repair powder coated anodised aluminium ventilator having aluminium section weighing not less than 0.55 kg/m, including aluminium louvers, frosted 3mm thick glass, SS wire mesh, including arrangement for fixing of exhaust fan and necessary joining cleats,glazing clips,screws etc complete all as specified and as directed.Note :Shade and size shall be as approved by Engineer-in-Charge. |
| 44 | S & F powder coated aluminum windows, three track, made out of aluminium sectionsincluding all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a)Window frame:(i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m)(ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m)(b)Shutter: (i)Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note :Shade shall be as approved by Engineer-in-Charge. |
| 45 | S&F mild steel framed work such as grill, gratings, guard barsetc with end of bars shouldered and/or riveted or forged into spikes, ladders, iron frame, balusters, railings, cooler stand and similar works conforming to Fe.290, Gde-E-165including one shop coat of zinc chrome primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified and as directed. |
| 46 | S&F 0.8 mm thick mild steel plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. as required all as specified and as directed. |
| 47 | S&F one piece moulded cyclindrical vertical Double Wall Underground water storage tanks (cylindrical vertical with closed top), 5000 liters capacity hoisted and fixed in position and connecting all as specified and as directed. |
| 48 | Supply, install, commisioning and testing of Centrifugal monoblock Pump set of capacity 5 HP pump set heavy duty, 3000 RPM, having discharge 150 LPM, atminimum 27mtrs head, with HDPE pipe of bore 50 mm form pump set to outside the bore all including electric motor working on three phase 415 V, AC Electric supply 50 HZ complete including MS Clamp/Flats, Reducer socket, PVC bend, Barrel, PVC Nipple, suitable rated DOL starter, volt meter, ammeter, selector switch on off switch etc all assembled in cubical panel made up of MS CRCA sheet 16 SWG, duly painted with powder coating including MS angle iron supports duly embedded in PCC foundation all as specified and directed. |
| 49 | S&F 0.9m to 1.5m bottom door seal brown aluminium frame 38 to 45mm width all as specified and directed. |
| 50 | M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10Cm width or girth complete all as spd & directed. |
| 51 | M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 52 | S&F SS wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames withtinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 53 | S&Fdoor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm all as specified and directed. |
| 54 | S&F mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge. |
| 55 | S&F 100 mm long SS butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed. |
| 56 | S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI markedcomplete all as specified and as directed. |
| 57 | S&F 100mm size stainless steel handles, for cupboard/ kitchen cabinet complete all as specified and as directed. |
| 58 | S&F for aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and directed. |
| 59 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 60 | Taking up or down 15 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 61 | Taking up or down 20 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 62 | Taking up or down 25 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 63 | M&L for 16mm outer dia CPVC pipesSDR 11 & Brass CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 64 | M&L for 20mm bore CPVC pipesSDR 11 & Plain CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 65 | M&L for 25mm bore CPVC pipesSDR 11 & Plain CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 66 | M&L for cutting chases in walls for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girthall as specified and as directed. |
| 67 | S&F in repairs Vitreous China wash basin, white, of size 550x400mm including brackets, Waste Pipe, CP Waste coupling 32mm of bore, PVC connection pipe complete all as specified and directed.Note : Cat No S2040141 of CERA or equivalent model of makes Specified. |
| 68 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white seat cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and as directedNote : Cat No S1053102 of CERA or equivalent model of makes Specified. |
| 69 | S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacityWhite, with inlet ball valve, float, handlewith 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.Note : Cat No B1010110 of CERA or equivalent model of makes Specified. |
| 70 | S&F in repair PVC connection,15 mm size with PTMT nuts,450 mm longcomplete all as specified and directed. |
| 71 | S & F stainless steel grating with square frame (grating thickness 1mm and frame thickness 1.5mm) of size 125mm (minimum) with waste hole complete all as directed. |
| 72 | S&F in repair Soap dish, chromium plated, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. |
| 73 | S&F in repairs,Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.Make :- Cat No F8030111AB of Cera or equivalent model of makes specified. |
| 74 | S&F in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.Make : Cat No.F2014101 of CERA or equivalent model of makes specified. |
| 75 | S&F in repair over head shower roses 125mm size with 200mm long shower arm and wall flange all as specified and directed by Engr-in-charge.Make :- Cat No F7020111AB of Cera or equivalent model of makes specified. |
| 76 | S&F in repairs, bib tap 15mm dia, with wall flange and areator screws down for iron pipe or for iron pipe or for brass ferrule complete all as specified and as directed.Make :- Cat No F1015151 of Cera or equivalent model of makes specified. |
| 77 | S&F in repairstowel rail60 cm long between flangescomplete all as specified and as directed.Make : Cat No. F5015103CH of CERA or equivalent model of makes specified. |
| 78 | S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all asspecified and directed by Engr-in-Charge |
| 79 | S&F in repair bevelled edge looking mirror 5.5mm thick ofsize 600mm x 450mm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screwscomplete all as spfd anddirected by Engr-in-charge. |
| 80 | S&Fin repairs, rotational moulded polyethylene water storage tanks colour white(cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as specified and as directed. |
| 81 | S&Fin repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20mm dia, ISI marked complete all as specified & as directed. |
| 82 | S&F in repairs, 20mm dia stainless steel curtain rod with brackets and finials at both ends as per site requirement including taking down old curtain rods with accessoriescomplete all as specified and as directed.Note :- The Cost of brackets and knobs shall deemed to be included in the quoted rate. |
| 83 | S&F in repairs 75 mm dia PVC(SWR) nahani/ floor trap withgrating including jointing to waste pipe with solvent cement complete all as specified and as directed. |
| 84 | Dismantling board any description, fixed in any position with nails complete all as directed |
| 85 | S&F for providingCupboard/kitchen cabinet with shutters in required size atsite made out of 18 mm thick solid PVC board one side laminated and other side plain. The panels shall be fabricated using adhesive, screwed and secure as required.All edges shall be covered with 1.5mm thick edges leaping tapes or 90 degree edgebent finish as per manufactures instructions, including dismantling of existing shutters complete all as specifed and directed. |
| 86 | S&F continous (Piano) hinges, brass finish of30mm width of flaps when open complete all as specified and as directed |
| 87 | S&F 100mm size hasp and staple, aluminium anodisedsafety type, fixed with screws complete all as specified and directed |
| 88 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed |
| 89 | S&F in repair magnetic catcher, Double strip (horizontal type),in cupboard/ward robe shutters including fixing wit necessary Stainless Steel screws etc. complete all as specified and as directed. |
| 90 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 91 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand confirming to Fe-290 (Gde E165) including preparing back of chowkhat and simlar applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 92 | S&F in repair for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed to walls complete all as specified & directed. |
| 93 | S&F in repairfor 110 mm bore PVC (SWR) pipes single socketed with rubber ring joints, laid in trenches or in floors, fixed to walls complete all as specified & directed. |
| 94 | S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 95 | S&F PVC bend/ shoe of dia. 110mm complete all as specifiedcomplete all as specified. |
| 96 | S&F PVC bend/ shoe of dia. 75mm complete all as specifiedcomplete all as specified. |
| 97 | M&L in repairsfor water proofing treatment to RCC roof slab, including parapet, comprising with the followingtreatment/specification from bottom to top:-(i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish outside MD land.(ii) Screed bed or bedding layer of 10 mm thickcement mortar 1:4 with mixing of WPC @ 3% by weight of cement or as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. |
| 98 | (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.40 ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum),weighing 3.6 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall beapplied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying two coat of Bituminous aluminium paint over the APP modified membrane @ 0.11 Kg/sqm.Note: Cost of Water proofing compound shall deemed to be included in the quoted rate. |
| 99 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaing out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed. |
| 100 | Demoltion of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landings, chajjas and other similar suspended works and paving, including cutting of reinforcement complete all as specified & directed. |
| 101 | Use and waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 102 | Use & waste of formwork to edges of slabs and similar work exc 10cm butnot exc 20cm wide for rough finished flat surfaces of concreteall as specified and as directed. |
| 103 | M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 104 | M&L forRCC 1:2:4, type B-1, using 20mm graded stone aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed. Note : Reinforcement shall be measured and paid seperately. |
| 105 | Resecuring or easing of door shutters exc 1 sqm but n.exc 2 Sqm for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed. |
| 106 | Hacking out of old broken glass (any thickness ,size quality or description) fromwooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 107 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or beads in square including glazing pins, n.exc 0.50 sqm in each pane, of any description complete all as specified and as directed. |
| 108 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc and matching with existing surface complete all as specified and as directed. |
| 109 | M & Lpoint wiring complete with two runs of 1.5 sqmm for phase and neutral single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990,PVC insulated andunsheathed , FRLSH cable drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as reqd at site,totally concealed inwalls/floors/ceilingincluding all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in wallswith 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws |
| 110 | and sunk/cup washers, for mounting of switches, sockets fan regulates etc; including 1.5 Sqmm (22/0.30 mm) 1100 V gradePVC insulated, unsheathed flexiblemulti stranded copper conductorFRLS (H) cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & directed forlight point or one fanpoint controlled by one, one way switch Note: (a) The unitrate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making gooddisturbed surfaces .(b) Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (c) All points shall be earthed up to fixtures i.e holders, tube lights, all lights, ceiling lights, bulkhead lights, bldg security lights etc. |
| 111 | All as per serial item No 108but for one 3 pin 6 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals. |
| 112 | All as per serial item No 108 but for one 3 pin 6 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals. |
| 113 | All as per serial item No 108but with 2.5 Sqmm cables for one 16A, 6-Pin (multipurpose) socket outlet pointon independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete all as specified and as directed. |
| 114 | S&F Modular switch single pole one way6/10 Amps 1 module complete all as specified and as directed. |
| 115 | S&F Modular switch single pole one way 16 Amps 1 module complete all as specified and directed. |
| 116 | S&F Modular socket 6 Amp-3 pin combined 2module complete all as specified and as directed. |
| 117 | S&F Modularsocket 6 A/16 Amp -6 pin combined 2 module complete all as specified and as directed. |
| 118 | S&F Modular fan regulator Step Type, 120W-2 Module Complete all as specified and as directed. |
| 119 | S&F in replacement decorative ultra slim batten square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientof capacity 20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXAZP7IN1W020 of Havells or equivalent of makes specified in PS |
| 120 | S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientof capacity 10 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXAZP7PN1W010 of Havells or equivalent of makes specified in PS |
| 121 | S&F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 122 | S&F in replacement LED lamp of capacity 9 Watt, 230 volts 50 Hz AC complete all as specified and as directed.Make : Cat No.LED PLUS 9W B22 CDL 1S LAMP V8I 2.0 of Havells or equivalent of makes specified in PS |
| 123 | S&F in replacement LED light fitting 1x 9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with two core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 124 | S&F ceiling rose surface bakelite three terminal type complete all as specified and as directed. |
| 125 | S&Fin replacement MCB DB double door 4 way TPN with suitable Amp rated busbar 415 V complete all as specified and directed by Engr in Charge. |
| 126 | S&F in replacement MCB DB double door 8 way SPN with suitable Amp rated busbar 240 V complete all as specified and directed by Engr in Charge. |
| 127 | S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed. |
| 128 | S&F in replacement of MCB SP, C Curve, 6 to 32 Amps 10 KA single pole AC 230volts complete all as specified and as directed. |
| 129 | S&F in replacement of MCB SPN, C Curve, 40-63 Amps 10 KA single pole AC 230volts completeall as specified and as directed. |
| 130 | S&F in replacement of MCB C Curve TPN 40-100 Amps, 415 V complete all as specified and as directed. |
| 131 | M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLSH cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawndrawn through concealed conduit and including PVC conduit heavy grade alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLSH copper conductor as continuos earth wire and connecting to common earth terminalsand testing on completion including taking down old submain wiring and casing caping complete all as specified and as directed.NOTES: (a) Proper colour coding shalladopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 4 sq.mm cable and one run of PVC conduit shall be measured as one unit |
| 132 | M&L for sub main wiring with 2 runs of 2.5 sqmm, single core, PVC insulated & unsheathed FRLSH cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn through concealed conduit and including PVC conduit heavy grade alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed FRLSH copper conductor as continous earth wire and connecting to common earth terminalsand testing on completion including taking down old submain wiring and casing caping complete all as specified and as directed.NOTES: (a) Proper colour coding shalladopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 6 sq.mm cable and one run of PVC conduit shall be measured as one unit. |
| 133 | Supply, laying,testing and commissioning of UG LT cables, 50 Sqmm x 3.5 core, 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminium conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cableincluding material and labour for all jointing/connecting material as requiredsize, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall including taking out old cable and cable covers complete all as specified and directed. |
| 134 | Supply, laying,testing and commissioning of UG LT cables, 16 Sqmm x 4 core, 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminium conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cableincluding material and labour for all jointing/connecting material as requiredsize, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete all as specified and directed. |
| 135 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shafts, wells, manholes, pier holes, laying of cable& pipes etc not exceeding 10 sq m on plan not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and as directed. |
| 136 | Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 mbut not exceeding 3.0 m in depth for foundation etc or for shafts, wells, manholes, pier holes, laying of cable& pipes etc not exceeding 10 sq m on plan exceeding 1.5m but not exceeding 3.0 m in depth and getting out in in any type of soil complete all as specified and as directed. |
| 137 | Removing excavated surplus soil to a distance n.exc. 50 mand depositing where directed at a level not exceeding 1.5 m from the starting point complete all as specified and as directed. |
| 138 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick as in soil complete all as specified and as directed. |
| 139 | Supply and laying Double Walled Corrugated (DWC) HDPE pipe of nominal bore 63mm including 90 degree bends with coupler and rubber ring, conforming to IS :16205 Part 24 Type 450N, laid in trenches for cable protection complete, all as specified and as directed. |
| 140 | M&L in replacement for GI tubing 40 mm bore light grade for protection of cable with all necessary fittings accessories such as MS 40x3mm clamps of suitable length, nuts, bolts and washers and fixed complete towall/ceiling or laid under floors complete all as specified and as directed. |
| 141 | S&Fin replacement 35 Wattbuilding mounted LED security light fitting complete made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2m long bend to shape requiredfixed to pole / wall with 02 Nos MS clamps made out of flat iron 40x5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting complete all as specified and as directed. |
| 142 | M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia, by means of nut bolts, check nuts and washer andthe GIEarth wire connected upto main earth point/DBs alongwith 15mm dia GI medium grade protection pipeincluding provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4)cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape,GI light grade |
| 143 | 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh andearth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.Note : Rate of GI earthwire and GI protection pipe upto 7.5 mtr length shall be deemed to be included in this item |
| 144 | Supply, installing, connecting, testing and commissioning of electric water heater storage type capacity 25 Litres 5 star rated with inner body duly coated for superior corrosion resistance, heavy duty protective anode to protect the inner container from corrosion, Energy saving high density PUF insulation to keep hot water for longer time, precaliberated thermostat, safety valve, fire retardant power cord, Corrosion proof outer body, Colour changing LED indicator, Heavy duty heating element with rated voltage 2 KW, 230 volt, 50 Hz ,vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with and including 600 mm long hot and cold water connection and electric connectionscomplete all as specified and as directed by Engineer-in-charge. |
| 145 | M&L for sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed FRLS cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Capping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed FRLS copper conductor cable as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed.NOTES: (a) Proper colour coding shalladopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 4 sq.mm cable and one run of PVC casing caping shall be measured as one unit |
| 146 | S&F sheet metal enclosure, SPN enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and directed . |
| 147 | S & F stop/angle valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. |
| 148 | S&F in repairs, angle/ stop cock 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. |
| 149 | S&F CPcast copper alloy, wall mixer for mixing hot and cold water and bend for connecting to shower,15 mm borescrewed for iron pipe and fixed complete all as specified and as directed. |
| 150 | S&F MCB SP, C Curve, 6 to 32 Amps 10 KA single pole AC 230volts complete all as specified and as directed. |
| 151 | S&F heavy duty, metallic body with metallic blade & brackets, ISI marked exhaust fan, 300 mm sweep, min 1300 RPM, min air delivery 1050 CMHwith louvers to prevent entry of mouse & birds and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to exhaust fan, including cutting and making hole on existing wall and fixing on wall with necessary bolts, nuts , washers,etc complete all as specified and as directed by Engineer in Charge. |
| 152 | M&L for point wiringwith two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990,PVC insulated andunsheathed , FRLSH cabledrawn through andPVC casing caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc.alongwith 1.5 Sqmmcopper conductor cable (multistranded)PVC insulated and unsheathed FRLSH cableas earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC boards/bakelite sheetsfor mounting switches, sockets, fan Regulators, accessories etc as specified and as directed for one light point or one fan point controlled by one, one way switchNOTES: (a)Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fixtures/ fittings |
| 153 | Surface dressing not exc 15 cm deep and getting out in any type of soil complete all as specified and as directed. |
| 154 | S & Ffor 110 mm bore PVC (SWR) pipes single socketed with rubber ring joints, laid in trenches or in floors, fixed to walls complete all as specified & directed. |
| 155 | S & F 110 mm dia PVC (SWR) bendsof any radiuscomplete all as specified and as directed |
| 156 | S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed. |
| 157 | Supply and fixsluice valve of size 100 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. incl taking out old/ UNSV sluice valve from valve chamber / trenches complete all as specified and as directed. |
| 158 | S&F 20mmbore UPVC pipes Sch 40 including fittings, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed. |
| 159 | Supplying, filling, spreading & levelling stone boulders ofsize range 5cm to 20 cm in screen chamber, in the required thickness, for all leads and lifts, all complete as per direction ofEngr-in-Charge. |
| 160 | Supplying, filling, spreading & levelling gravels of size range 5mm to 10mm in the screen chamber over the existing layer of boulders in required thickness, for all leads and lifts, all complete as per direction of Engr-in-Charge. |
| 161 | Supplying, filling, spreading & levelling charcoal over existing gravel layer, for all leads and lifts, all complete as per direction of Engr-in-Charge. |
| 162 | M&L forPCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete completeall as specified and as directed. |
| 163 | Excavation of pits of size 0.60m x 0.60m x 0.60m deep, removing moorum, debris, weeds/roots etcto a distance exc. 50mand not exc 250mand including supplying & filling good earth / locally available fertile soil and cattle manure mixed in 4:1 ratio, adding fertilizers, provision of antitermite treatment at plantation time, supplying & planting of following species of plantsminimum of 4 to 5 feet high healthy trees/plants with well developedroot system (along road side), replacement of dead plants upto the completion ofmaintenance period of 03 months after completion ofentire work including flooding with water, levelling with and including supply and fixing stakes (bamboo) 1.75m high above GL as support to sapling etc complete all as specifiedand as directed for the following plants/ trees :- Note :- (i) The treesshall be selected and approved by the Engineer-in-Charge before plantation.(ii)The Maintenance and Upkeeping period of plants shall be 3 months after completion of work anddead trees/Plants shall be replaced without any extra cost during this period. |
| 164 | Ashoka, Conocorpous |
| 165 | Golden Sibras, Golden Duranda |
| 166 | Chapha, Jasmin, Nekotia, |
| 167 | Survey and ground water study by the state/central ground water survey and development agency Maharashtra state/Govt of India as per the location provided by Engr in charge. The rate shall be deemed to be inclusive for Cost and charges for the same required. Note :In the above survey report shall providethe supplementary drinking water sources in the area,location for drilling of borehole, depth of borewell, diameter and discharge ofwater in peak summer per hour. |
| 168 | M&L for Drilling of Bore Hole suitable for 150 mm dia case piping from ground level to 110 meter or above in any strata below ground level through any kind of strata soils/rocks, disposal of surplus soil within a distance of 100m, well ramming and stabilizing of material, transportation of drilling rig and other T&P required, including lowering and extraction of casing pipes complete all as specified and as directed by Engineer In Charge. Note : Casing pipe shall be measured and paid separately .The depth of casing pipe to be decided by Engineer-in-Charge. |
| 169 | M & L for fixing PVC casing pipe of 150 mm dia class \"A\" upto 6 mtr depth with fitting as required below ground level in any type of strata complete all as specified and as directed. |
| 170 | M&L for Yield test for the bore well by continously pumping for 08 hrs) to determine safe pumping yield. Note :The rate includes for provision of electric supply for pumping and required T&Ps for testing all as per standard shall be arranged by the contractor. |
| 171 | Development of Tube Well by means of pumping and compressed air (Compressor to be arranged by contractor at his own cost), until sand free and clear water is obtained at optimum yield complete all as specified and directed by Engr-in-charge. |
| 172 | Supply Installation testing and commissioning of Submersible pump, electric driven, three phase at voltage 415V + 10%, Frequency 50 Hz, suitable for 150mm dia borewell (Casing pipe size 150mm) having discharge min 80 LPM @ 90 meter head supply, Protection Class IP68 and install complete of minimum capacity 3.0 HPcomplete all as specified and as directed by Engr-in-Charge.Note: The rate includes for supply and fix nylon rope having min 12 mm dia and 120 Rm length of best quality for operation of submersible pump set complete all as specified and as directed.”Make : Crompton and equivalent model of makes specified in PS |
| 173 | S & F reducer, bail plug, well cap, NRV, MS strip for centring, MS iron clamps, eletric logging and sample strata box(suitable for 150mm size borewell) complete all as specified and directd. |
| 174 | S&Fsubmersible cable of size 4 Sqmm 3 core,flat, AC 415V,with multistranded copper conductor and jointing with submersible pump setcomplete with submersible water proof jointing tape all as specified and directed. |
| 175 | S&F high density polyethylene pipes (HDPE) of pressure rating 10 kgf/cm2 of size 40 mm dia including connected with bore well Pump and lowering to the well complete all as specified and as directed |
| 176 | Supply and laying and testingLT XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured eletric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm4 core complete all as specified and directed..Note : Excavation & Earthwork, Cable protection pipe, etc shall be measured & paid separately under the respective item. |
| 177 | Supply and laying Double Walled Corrugated (DWC) HDPE pipe of nominal bore 50mm including 90 degree bends with coupler and rubber ring, conforming to IS :16205 Part 24 Type 450N, laid in trenches for cable protection complete, all as specified and as directed. |
| 178 | Supply, laying, jointing and testing 40mm dia GI tubing medium grade,ISI marked with and including all fitting and fixture such as GI bend,tee,union etc laid in trenches/on wall in any length with all fitting complete all as specified and directed by Engr in charge. |
| 179 | Supply, Laying, jointing and testing 25mm dia GI tubing medium grade, ISI marked with and including all fitting and fixture such as GI bend,tee,union etc laid in trenches/on wall in any length with all fitting complete all as specified and directed by Engr in charge. |
| 180 | Supply,fix and testing of 40mm dia. Gun metal gate /globe valve heavy duty ISI marked with iron wheel head screwed both ends complete all as specified and directed by Engr in charge. |
| 181 | M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to GI earth strip 32 X 6 mm by means of nut bolts, check nuts and washer of the GI. Earth wire connected upto main earth point/DBs alongwith40mm dia GI pipe, light grade protection pipe,including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick RCC (1:2:4)cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh andearth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.Note : Rate of GI strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in this item. |
| 182 | M & L for fabrication of bus bar chamber of size 750 (L) x 500 (H) x 300 (B) mm for415 volts 3 phase 4 wire system , outdoor type, double door, with pedestal mounted, weather and vermin proof fabricated out of 3.15 mm thick MS CRCA sheet with anti corrosive coating & finally epoxy polyster powder coating of flint grey shade including 3 nos. phase indicating lamps, insertion ofsuitable cable glands for all incoming and out going cable including grouting of panel board60 cm above & 30 cm below ground level duly supported on 50x50x6mm angle iron frame & welding 45 cm long angle iron legs of size 50x50x6mm on all the four corners embedded in PCC 1:2:4 using 20 mm stone aggregate upto 30 cm depth complete all as specified and directed by Engineer-in-Charge (a) Copper bus bar capacity 63 Amps for phase R-Y -B 03 nos 63 Amps for neutral - 01 set.(b) MCCB TP 32 Amps with breaking capacity 16 KA,415 volt-01 Nos(c) Fully automatic DOL starter AC 415 volt suitable for 3 phase ,3 HP/5 HP motor of bore well - 01 Nos(d) Single phase preventre of suitable range -01 Nos(e) Digital Ammeter of range0 to 100 Amps with suitable size CTS -01 No(f) Digital volt meter of range 0 to 415 volt -01 nos (g) LED indicating lamps R- Y-B (h) Selector switch for ammeter and volt meter - 02 Nos |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
