Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-02-2026 | BOQ corrigendum | BOQ | 05-03-2026 |
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge. |
| 2 | Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed. |
| 3 | Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials complete all as specified and directed. |
| 4 | Demolition of cement concrete (reinforced) in landing slab, chullah hoods ,manhole covers, Roofs ,Floors, beams, stair case, landing, chajja and similar suspended work complete all as specified and directed. |
| 5 | Dismantling floor hearth wall tiling (but not backing) removing serviceable tiles to store rubbish off the premises complete all as specifiedand directed. |
| 6 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars& precast concrete masonry etc complete all as specified & directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 but each complete all as specified & directed. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but n exc 4 sqm each complete all as specified & directed. |
| 9 | M&L 75mm thick cement concrete 1:3:6type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement and Joints of panel should be filled by bituminous mastic complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 11 | M&L for PCC (1:4:8) type D-2 (Using 40mm stone aggregate) as in foundation concrete all as specified and directed. |
| 12 | Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landing, cover slabs (for manholes etc) Chajjas, water troughs, managers, shelves and Similar article with plain faces complete all as specified and directed. |
| 13 | M&L plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 14 | M&L rendering 15mm thick in cement mortar 1:6 including WPC on stone/brick masonry finished even and smooth complete all as specified and directed by Engineer-in-Charge.Note : quoted rate is deemed to be inclusive for work at any height and location including cost of scaffolding and all other equipment’s reqd to execute the work. Note: WPC will measured and paid separately under respective items complete all as specified and directed |
| 15 | M&L for 15mm thick cement plaster in CM 1:6 on other than fair faces of brick/stone work or concrete surface finished even and smooth complete all as specified and directed |
| 16 | Supply only water proofing compound as per IS-2645 complete all as specified and directed. |
| 17 | M&L for Rough cast plaster on exterior wallsapplying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered completeall as specified and directed by Engineer in Charge. |
| 18 | Taking down carefully existing bitumen tarfelt including plaster of any description over the surfaces of roof, terraces including flashing and junction of parapets/curve walls etc and removing of the rubbish and depositing where directed complete all as specified and directed. |
| 19 | M&L water proofing treatment to RCC roof slab including parapet comprising of following course of treatment/specified from bottom to top complete all as specified and directed. (a)Applying Bituminous primer 85/25 @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.5 Kgs/Sqmuniformly embedded during manufacturing process shall only be used, it shall be laid by torch application . side overlap should be 75mm and end shall be 100mm. (C) Applying two coats of heat resistance paint over membrane complete all as per manufacturers instruction Note:- For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside parapet in groove.The same shall be finished by a membrane flashing. |
| 20 | M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L taking down and removal of loose / disintegrated old concrete up to 50mm depth/ plaster and cleaning all loose dust washing with water and epoxy bonds materials of pidilite /Dr fixit with new cement plaster /polymer modified plaster/concrete /screed concrete wth old surface etc complete all as specified and directed. |
| 22 | M&L for applying 15 to 20mm thick plaster on ceiling/beam (Bottom / sides) and a like surfaces with polymer modified fibre reinforced structural grade repair mortar finished surface to match with existing adjoining surfaces of ceiling bottom and sides beams and alike complete, The repair mortar shall be applies when bonding agent is still sticky. The application will be as per manufacturers instruction complete all as specified and directed. |
| 23 | M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete all as specified and directed.Note : Qty of zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption. |
| 24 | M&L for Glazed coloured ceramic tiles300x600x7 mm thicklaid over and including 10 mm rendering in CM 1:4 as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 25 | M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding exceeding 0.11 sqm n exc 0.16 Sqm in floors etc. laid over and including 10 mm rendering or bedding layerin CM 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 26 | M&L for vitrified double charged ceramic tiles of size 600x800mm/800x1200mm8-10mm thick (square/rectangular), polished, coloured,in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 27 | All as srl item No 26.00 but as in skirting/dado including cement mortar rendering/screeding 1:4 10mm thick |
| 28 | M&L for machine cut Green Marble 15-18mm thick as in riser of steps, skirting, dado and pillar set over 10 mm rendering in CM 1:3 and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified by Engr-in-Charge. |
| 29 | M&L 12mm thick vitrified exterior grade textured finished tiles (ENDURA JOHNSON OR EQUIVALENT HEAVY DUTY TILES (FOR PARKING/PORCH or as approved by GE) of size (30cmx30cm/40cmx40cm) set and jointed in net cement slurry in floor including cement mortar screed bed 1:4, 20mm thick and pointing with admixture of white/colour cement and pigment complete all as specified and directed. |
| 30 | M&L for Vibrator moulded (Coloured) precast concrete interlockingpaver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and including 25mm thick sand cushionand filled the joints with dry sand after laying the paver block complete all as specified and directed. |
| 31 | M&L for 18-20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite laid over 15 mm screed bed or bedding layerin CM 1:3, including grinding of edges to curved surface finish complete all as specified and directed. |
| 32 | M&L for cutting holes in stone /RCC/granite slabfor inserting cooking gas cylinder pipeand making good complete all as specified and directed. |
| 33 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 34 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X100mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 35 | S&F Gauzed shutter made of stainless steelframed work as in door frames madehallow/square/rectangular/circular section and other covering door to be prepared for handing or sliding with including either hooks, fittings, mortice lock and hanging also fastening and fixing , necessary arrangements for fixing of wiremesh, necessary bolting including welding complete all as specified and directed.Wire gauge will be measured and paid separately |
| 36 | S&F factory mademoulded PVC door shutter 28-30mm thick (style) with 2,4,or 6 raised panel design with 2mm thick moulded prelaminatedPVC sheet on the front face & 2 mm plain colour prelaminated PVC sheet on the back face, supplying & fixing in frame at site as per specification & drawing |
| 37 | S&F solid PVC door frames of size 50mmx47m made out of 5mmwood grain printed PVC sheet used instead of plain colour PVC sheetand edges will be painted to match wth printed sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing |
| 38 | S&F Aluminium windows made of 1.59 thick powder coated (thickness of powder coating not less than 50 micron) as per aluminium section of size given below . Aluminium window will be of double shutter of one glass/ one wire gauge shutters including frame with Aluminium U channel allnecessary accessoriesjointing cleats , glazing clips, rubber neoprene packing, for fixing glass/ wire gauge, aluminium handles and tower bolt 2 Nos 100 mm ‘D’ Type in each door, 2 Nos 100 mmaluminium hinges including necessary steel screws complete all as specified and directed by EngrThe size of different aluminium section to be used is as under (a) Outer Frame 125X45X2 mm thick (b)shutter frame section size 44X44X1.59mm thick for glass and 44x44x159mm for wire gaugeNote: Rates quoted are inclusive all fittings and fixtures complete all as specified and directed. Glass and wire gauge will be paid separately in respective items. |
| 39 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed. |
| 40 | S&F sheet glass, ordinary quality 4.80 mm thick fixed with rubber beading and clips size of glass n.exc 2 sqm in each pane complete all as spd & directed. |
| 41 | S&F frame work such as grills, gratring etc, with ends of bars shouldered &/or riveted or forged into spikes, framed guard bars, barred iron door ladder, frame balusters, walk ways, railing, frame work or water tanks & similar work conforming to Fe-290 Gde E-165. |
| 42 | S&F in repair vitreous china squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe complete including provision of lime concrete bedding complete all as specified and directed. |
| 43 | S&F fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-symphonize pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed. Make: JAQUAR/CERA/HINDWARE |
| 44 | Supplyand fixing in repair PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle symphonic action type incl brackets and flush pipe of polythene of low or high density. Make ; JAQUAR/CERA/HINDWARE |
| 45 | S&F in repair 15mm dia bib tap cast copper alloy chromium plated withbutter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed as fixed in repair complete all as specified and directed. |
| 46 | S&F in repair 15mm dia bib tap cast copper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed as fixed in repair complete all as specified and directed. Make : JAQUAR Cat part NoOPP-15037PM or equivalent of HINDWARE/CERA |
| 47 | S&F in repairs Stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make : JAQUAR Cat part No OPP-15053PM or equivalent like HINDWARE /CERA |
| 48 | S&F in repair shower rose(fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. Make : JAQUAR cat part No OHS-CHR-1663 or equivalent of HINDWARE/CERA |
| 49 | S&F in repairs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. Make : JAQUAR Cat part No OPP-15083KPM or equivalent of HINDWARE/CERA |
| 50 | S&F in repairs Mirror cabinet PVC frame of size 400 x 500 mm fixed to wall with brawl plug & stainless steel suitable size screws complete all as specified and directed.Make :Prayag cat No 554 or equivalent as approved by GE. |
| 51 | S&F in repairs wall mixer chromium plated (3-in-1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe complete all as specified and directed. Make : JAQUAR cat part No OPP-15125PM |
| 52 | S&F in repairs glass corner shelf set of three (Cat Part No T6010A1 of make – Parryware or equivalent of Jaquar/Marc) complete all as specified & as directed. |
| 53 | S&F in repair 800mmx600mx5mm thick beveled edge looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood incl framing and fixed to wooden plugs with chromium plated screws & cup washers & fixed in repair i/c taking out old mirror complete all as specified and directed. |
| 54 | S&F in repairs vitreous china wash basin white of size 550x400 mm with pedestal stand including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long,flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed. Make : JAQUAR/CERA/ HINDWARE |
| 55 | S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste coupling 32 mm size with aerator complete cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts screwed for iron pipes of 15 mm bore complete all as specified & as directed.Make : Jaquar, Cera, Johnson or equivalent as approved by GE. Make : JAQUAR Cat part NoOPP-15011BPM equivalent of HINDWARE/CERA |
| 56 | S&F in repairs health faucet, brass chromium plated for EWC with & including PVC connection 1m long suitable for 15 bore GI pipe with PTMT nut & nipple complete all as specified and directed. |
| 57 | S&F in repair 15mm dia bore cast copper alloy chromium plated fancy typepillar tap for complete all specified and as directed. |
| 58 | S&F in repair 32 mm dia PVC flexible waste pipe for WHB/Sink 600 mm long with PVC coupling all as directed fixed in repair complete all as specified and directed. |
| 59 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed. |
| 60 | Refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) bore of pipe in 20mm dia complete all as specified and directed. |
| 61 | S&F tubes medium grade \"galvanised\" with and including all fitting and fixed bore of 20 mm dia complete to walls and ceiling or laid in floors of 20 mm bore complete all as specified and directed. |
| 62 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed. |
| 63 | Refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) bore of pipe in 15mm dia complete all as specified and directed. |
| 64 | S&F tubes medium grade \"galvanised\" with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and directed. |
| 65 | S&F in repairs sink double bowl made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing in granite bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polyethylene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, including taking down old unserviceable sink complete all as specified and directed. |
| 66 | S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 67 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) holisted and fixed in position including dismantling of existing tank all as specified in SSR Part-I complete all as specified & directed. |
| 68 | S& F 1000 Ltr capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm float valve 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge. |
| 69 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 70 | S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 71 | S&F in repair Floor Drainer with Collar and Cockroach Trap/Jali with or without waste hole complete all as specified and directed. |
| 72 | S&F in repair brass chromium plated soap dish, complete all as specified and directed. |
| 73 | S&F in repair brass chromium plated towel ring incl a pair of CP brass bracket complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F in repair brass chromium plated fancy type toilet paper holder complete all as specified and directed. |
| 75 | Cutting Chases exe 10 cm but n exc 20cmin girth in brick/stone wall for fixing of PVC Pipe/GI pipe of 15 & 20mm bore (concealed in wall) including making good surface in CM (1:6) & to match with the existing surfaces complete all as specified and directed. |
| 76 | S&F in repair PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed |
| 77 | S&F in repair PVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed. |
| 78 | S&F in repair PVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed. |
| 79 | S&F in repair PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed. |
| 80 | S&F in repair PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified and directed. |
| 81 | S&F in repair PVC (SWR) bend 75mm bore of any radius complete all as specified and directed. |
| 82 | S&F in repair PVC (SWR) bend 75mm bore of any radius with access door complete all as specified and directed. |
| 83 | S&F in repair PVC (SWR) bend 110 mm bore of any radius complete all as specified and directed. |
| 84 | S&F in repair PVC (SWR) bend 110 mm bore of any radius with access door complete all as specified and directed. |
| 85 | S&F in repair PVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 110 mm bore with access door complete all as specified and directed. |
| 86 | S&F in repair PVC(SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 110 mm bore with access door complete all as specified and directed. |
| 87 | S&F in repair PVC (SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 75 mm bore with access door complete all as specified and directed. |
| 88 | S&F in repair PVC (SWR) vent cowl 110 mm complete all as specified and directed. |
| 89 | S&F for Pipe Supporting Clamping - 2 Nos for 20mm & 2 Nos for 15mm bore GI pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3\": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \"C\" Channel with ribs to be used of size 10\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1.Material Qty. for one unit : 1. Profile Bracket Wall distance 3\" - 2 Nos. 2. Continuous Slotted C Channel of Size 10\" - 1 No.; 3. U Bolt R/M for 3\" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2\" Zn coated - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102.Make: Shaivi or equivalent as approved by GE. complete all as specified and directed |
| 90 | S&F for Pipe Supporting Clamping - Single Pipe of dia 3\" (75 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3\": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanized + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \"C\" Channel with ribs to be used of size 10\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanized+ Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1.Material Qty. for one unit : 1. Profile Bracket Wall distance 3\" - 2 Nos. 2. Continuous Slotted C Channel of Size 10\" - 1 No.; 3. U Bolt R/M for 3\" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2\" Zn coated - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102.Make: Shaivi or equivalent as approved by GE. complete all as specified and directed |
| 91 | S&F for Pipe Supporting Clamping - Single Pipe of dia 4\" (110 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3\": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanized + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \"C\" Channel with ribs to be used of size 10\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanized+ Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1.Material Qty. for one unit : 1. Profile Bracket Wall distance 3\" - 2 Nos. 2. Continuous Slotted C Channel of Size 10\" - 1 No.; 3. U Bolt R/M for 4\" (110 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2\" Zn coated - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102.Make: Shaivi or equivalent as approved by GE. |
| 92 | Demolition and breaking up drain pipes (Salt glazed stone ware, AC, or Reinforced concrete) or 100mm dia set in cement mortar including PCC bed to drain pipe, packing under & hunching against the sides of drain pipes all as specified & directed by Engineer-in-charge. |
| 93 | S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed. |
| 94 | M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars including demolition and breaking up old existing pipe complete all as specified and directed. |
| 95 | M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone agg) as bed to drain pipe including in packing under and hunching against sides of pipes after they are laid and tested in complete all as specified for 100mm dia pipes complete all as specified and directed. |
| 96 | M&L for cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe complete all as specified and directed. |
| 97 | S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified and directed. |
| 98 | S&F extruded aluminum alloy with galvanized mild steel hing pin Butt hinges 100mm long complete all as specified and directed. |
| 99 | S&F stainless steel sliding door bolt with hasp, staple (bolt type) 300mm longnot less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed complete all as specified and directed. |
| 100 | S&Fstainless steeltower bolts of extruded section and fixed 200 mm long complete all as specified and directed. |
| 101 | S&F stailess steelhandles 150mm size fabricated type anodized ISI marked complete all as specified and directed. |
| 102 | S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, with vulcanised rubber piece fixed in floor complete all as specified and directed. |
| 103 | S& F in repair stainless steel plate rack out of 1.00 mm thick sheet of size 900 x 750 mm and depth of shelves 230 mm with partition for small /large plates made out of stainless steel 24 gauge all as per sampleto be hanged on wall by the help of steel screws grouted in walls with rawl plug design as approved by GE/Kept in GE Office |
| 104 | M&L for pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mmdia M S rod for locking, two nos chromium plated handle and one mortise pattern lock inclu two coats of spray painting over a coat of shop primer complete all as shown on drg no TD/2004/29 sheet no 1/3 to 3/3 |
| 105 | S&F(in repair) Harrison rails, mild steel, chromium plated curtain rod with fixing bracket, stops, rollers etc complete all as specified and directed. |
| 106 | S&F in repairs Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including matching finials at both ends and pair of SS brackets fixed at both ends with PVC brawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm complete all as specified and directed. |
| 107 | M&L for TMT bars 10mm dia and over cut to length to shape required including cranking, bending spirally or hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 108 | All as per srl item No 107.00 but 6mm to 8mm dia TMT bars complete all as specified and directed. |
| 109 | Excavating in trenches n exc 1.50m in width and n exc 1.50m in depth for foundation, manholes etc as well as n exc 10 sqmm on plan area and getting out in soft/loose soil complete all as specified and directed. |
| 110 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25 cm thick in soft/loose soil complete all as specified and directed. |
| 111 | Removing excavated soil to a distance exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 112 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan to any radius, built in 1:4 as in half brick thick wall complete all as specified and directed. |
| 113 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6 mean radius, built in CM 1:6 complete all as specified and directed. |
| 114 | Treatment of sunken portion is as follows :-(a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete all as specified and directed. (b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. Thesurface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be providedat the junctions of RCC slab and adjoining walls. (d) Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight ofcement. Over plastered surfaces, a layer of APP based polymeric membrane not less than 3mmthick, weighing not less than 3 kg per sqm, reinforced withpolyster non- wovenfabric (weighing not less than 150 gm per square metre) shall be laid by torchapplication. Side overlaps shall be 100mm and the ends laps shallbe 150 mm andoverlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes /joints and slabs / walls by filling water for 72 hours. The sunken portion ofNahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f) 32 mm dia GI spout shall be provided to drain out leakage, if any. |
| 115 | M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 116 | S&F for preparation of new steel surface/old untreated of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 117 | M&L for preparing newly plastered surfaces & applying two coats of oil emulsion distempering(OBD) over and including a coat of white wallcare putty 2 mm thick over a coat of primer on walls complete all as specified and directed. |
| 118 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty 2 mm thick complete over a coat of primer complete all as specified and directed. |
| 119 | M&L for preparation of old surfaces of ceilingand applying two coats of oil bound distemper on ceiling complete all as specified and directed. |
| 120 | Material and labour forpreparation of newly plaster surface of wall & applying two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height including necessary scaffolding. |
| 121 | M & L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint complete all as specified and as directed by Engr- in - Charge. |
| 122 | M&L for form work to soffits of suspended slabs such as roof slabs etc for rough finished concrete surface complete all as specified and directed. |
| 123 | M&L for form work to SIdes for slabs and Sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for fair finished concrete surface complete all as specified and directed. |
| 124 | M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded crushed stone aggregate as in roof, floor, slabs supported on walls complete all as specified and directed. |
| 125 | S&F factory madekitchen cabinetof size 1.5M x 0.60M x 0.3M,made out of 18mm thick PVC celuka sheet having density not less than 650kg/cum one side decorative lamination & other side balancing lamination sheet consisting of carcase18 mm thick PVC sheetincluding shutters made out of 18 mm thick PVC boardall required brackets 5.5 screws etc.The panels shall be fabricated using adhesive and screwswhere every required.All edge shall be covered with 2mm thick edge bonding tape or 90 degreeedge bent finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge Note : (i)PVC celuka sheet manufactured by an ISO 9001-2015 certified company, termite proof, water proof & flame retardant PVC sheet.(ii) PVC cabinet of required size fabricated by joining four 18mm thick PVC celuka ply fixed with each other using solvent cement adhesive and screws and 18mm thick PVC sheet as backing of cabinet screw and solvent cement adhesive etc(iii) The Cabinet box will be divided into twoequal part with two leafshutter and one shelf will be placed in cabinate (iii) Cabinate will be fixed in wall with4x fasteners etc and necessary fixing lugs (iv) Each shutter will be provided with SShandle 75 mm, CP Piano hinges, magnet/catcher(v)The quoted ratesare included the rates of all fittings and fixtures |
| 126 | S&F Stainless steel kitchen basketincluding cutlery tray, plate rack, utensil tray etc for modular kitchen of any size and shape with all accessories i.e. SS sliding Channel 304 Grade, SS screws etc as approved fixing in position including necessary drilling, PVC cap, self threading screws complete all as specified and directed. |
| 127 | Supplying and fixing in repair factory made PVC kitchen cabinet made out of 18 mmthickness consisting of panel of 18 mm thick celluca ply of density 650 Kg.cbm density with prelaminated sheet on one sidecut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickel plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nailscomplete all as specified and directed.Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturers specification and drawing. |
| 128 | Taking down carefully copper/Aluminium point wiring for one light/fan/socket/power point and taking down of teak wood batten / PVC casing capingand making good disturbed surfacesof walls/ceilings /floors etc incl dismentling of fittings. |
| 129 | M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductorcable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floorincluding PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with modular sheet top cover of required module with frame for mounting switches, sockets etc complete all as specified. Note -(a) Quoted rates shall be deemed to include the cost of Cutting Chases in Stone/Brick wall and making good to the disturbed surfaces including plastering andpaintingto match with the existing colour. (b) The rates Quoted by the contractor shall be deemed to include the cost of modular cover plates of required module with frame, cost of Sheet Metal Box and no additional payment shall be made on account of the same. |
| 130 | All as per srl item No. 129.00 but for one fan point controlled by one switch and regulator |
| 131 | All as per srl item No. 129.00 but for one bell/buzzerpoint controlled by one bell push |
| 132 | All as per srl item No. 129.00 but for one lightpoint controlled two ,two way switch |
| 133 | All as per srl item No. 129.00 but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board. |
| 134 | All as per srl item No. 129.00 but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board. |
| 135 | All as per srl item No. 129.00 but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour. |
| 136 | All as per srl item No. 129.00 but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour for AC complete all as specified & directed. |
| 137 | S&F switch piano flush type single pole one way, 5/6 amp 250 Volts , Modular type. |
| 138 | S&F switch piano fulsh type , single pole, two way 5 Amps 230 Volts, Modular type |
| 139 | S&F switch piano flush type single pole one way,15/16 amp 250 Volts , Modular type. |
| 140 | S&F socket outlet for 2& 3 pin 6 amp flush type 240 Volts ,two Modular type. |
| 141 | S&F socket outlet for 2 in 1, 3 pin6 & 16 amp, 240 Volts , two Modular type. |
| 142 | S&F modular bell push 5 Amps 240 Volt, One Modular type |
| 143 | S&F multi music type AC 230 volts single pole , Modular type |
| 144 | Supply and fixing Modular ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified. |
| 145 | Supply and fix in repair LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffisure duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver. it should have rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 K CRI >80, thd <10 and PF>0.95 complete all as specified and directed make - Crompton Cat Part CIS-305-40-57-SL-DP-NWH, Philips Cat part BN308C LED20S-6500 L120 PSU WH, Havells Cat Part Stella 20 Watt Galmtube LHEWAJPGPV1D020 |
| 146 | Supply and fix in repair wall mounted decorative lamp holder aesthetically designed with elegant frosted dual glass casing in durable metallic housing inbuilt with bulb holder two pin or Screwed type includinginsulated body with back plate for angle/batten fitting complete all as specified and as directed. Make/Model : Havells : Floretine WL1LSE27SSLHFOAJD1TZ1I060/Phillips Nerobless/Bajaj/Crompton |
| 147 | Supply and Fixing in repair 12 watt capacity emergency LED inverter bulb B-22 with tri colour control (Cool White/Warm White/Natural White) with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours.Make : - Havells/Philips/Bajaj |
| 148 | Supply and fixing in replacement LED Bulkhead fitting 1 x 10 Watt, complete with Standard LED lighting fixture with extruded polycarbonate housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting with all accessories and following specifications complete all as specified and directed by Engineer-in-Charge :-(a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 5°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : <15%. (f) IP rating : IP-65. (g) CCT : Minimum 5400K (h) Polycarbonate housing white coloured (j) LED Driver of the same make as of the luminaire. (k) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (l) Surge protection minimum 2.5 kV. (m) CRI : Minimum 80 (n) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) |
| 149 | Supply and fixing in replacement Decorative LED light fitting for mirror adjustable type with high out put diffuser 2 feet, 10 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-In-Charge. Make/Model : Phillips-Vega/Havells- Vanessa Glamtube |
| 150 | Supply and fixing in repair lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 151 | Supply and Fixing in repair 20 watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours complete all as specified and directed. Make : - Havells/Philips/Bajaj |
| 152 | Supply and fixing sheet metal enclosuresdouble door type suitable for fixing MCB\"s, SPN with 200 Amps rated bus bar,8 way, 240 Volts, grouted in wall including taking down complete all as specified & directed. |
| 153 | Supply and fixing sheet metalenclosures double door type , suitable for fixing MCB,TPN with 200 amps rated bus bar , 4 way. 415 Volts including taking down complete all as specified and directed. MAKE- havels,philips,bajaj |
| 154 | S&F in repair MCB 32 Amp, single pole & neutral,240 Volt complete all as specified and directed. |
| 155 | S&F in repair MCB SPN 63 Amp, Single pole & neutral,240 Volt complete all as specified and directed. |
| 156 | S&F in repair MCB 6-32 Amp, single pole240 Volt complete all as specified and directed. |
| 157 | Supply & fixing in repair AC box single pole and neutral enclosure with a two pin and socket complete with one single pole MCB 240 volts, 32 Amps complete all as specified and directed. |
| 158 | S&F sub main wiring on and includingpassing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductorunsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring complete all as specified and directed. (Note:Two runs of cable with one run of earth wire and one run of PVC Conduit shouldmeasured as one length) |
| 159 | Supplying, laying, jointing, testing and commisioning in replacement of size 3.5 core 50 Sqmm LT under ground cable, XLPE insulated, screened, PVCbedded, galvanised steel strip or wire armoured,electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall complete all as specified and directed.Note :- Exacavation and earth work, GI pipe for laying of cable, sand cushioning, cable protection cover shall be measured and paid seprately under respective items of the BOQ\". |
| 160 | Boring of holes under road, payment hard standing by trench less technology using ultra sound technique and necessary machine including supply and fixing HPDE pipe of 80 mm bore suitable for 0.4 mpa working pressure all as specified and directed. |
| 161 | M/L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed. |
| 162 | M&L for dry sand and punning for cushioning to under ground cable all as directed.Note :- For the purpose of payment only punned thickness shall be measured. |
| 163 | Supply and fixing in replacement energy efficient LED street light fitting of 35W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, fixing the light fitting with new bracket made out of GI tubing light grade 32mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 40x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, including taking down old Unserviceable light fitting with old bracket any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt.(b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%.(f) IP rating : IP66. (g) IK rating:Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI: More than 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) |
| 164 | Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.30 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers,PCCchamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc including taking down of existing complete all as specified &directed. |
| 165 | Supply and fixing in repair of25mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittingslaid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion as existing and including taking down of old unserviciable pipe complete all as specified and directed.Note :-Excavation Earth work will be measured and paid saperatly. |
| 166 | M & L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends with GI Union for iron pipe and fixed in repair complete all as specified and directed. |
| 167 | Supply & install, testing and commissioning in replacement of factory made,CPRI approved factory made LT panel outdoor KIOSK type with double doors of suitable size provided with locking arrangements dust, weather and vermin proof 1100 volt grade, 50 Hz AC made out by 3.15 mm thick CRCA sheet steel, fully compartmentalised, with IP-65 protection all as per conforming to IS: 2417 of 1962 complete with and 50x50x5 mm thick angle iron for frame and legs, 04 Nos. legs 750 mm long 450 mm grouted in PCC blocks of type B-1 (1:2:4) with 300 mm ground clearance,for 415 volts, 3 phase, 4 wire AC supply complete all as directed with and including the following :- Distribution Panels under Stair Cases of Block of 4 Qtr(a) MCCB 4 pole 415 Volt, 100 Amps ,Adjustable thermal and magnetic release rupture capacity 25 KA - 01 No (incoming)(b) MCB 230 Volt, 40 Amps SPN-6 Nos (Outgoing). The Panel should be well equiped with separate compartments of size 300 mm x 300 mm- 6 Nos with separate door for each compartment for mounting Smart Energy Meters along with these MCB\"s. The rates quoted by the contractor shall be deemed to include the cost of ixing the existing energy meters in these compartments and making necessary electrical connections.(c) Digital Voltmeter 96 sqmm 0 - 500V with selector switch - 01 No(d) Digital Ammeter 96 sqmm 0 - 200 Amp with CTs and selector switch - 01 No(e) Aluminium strip bus bars with colour code PVC insulation 150 Amps capacity - 01 Set(f) Indicators RYB - 01 Set(g) Earthing terminals and cable glands.(h) Internal wiring of panel board with solid coductor copper cable single core of sutable size and incl 03 Nos bakelite control fuses.(j) Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door. |
| 168 | Disconnecting form elect connection andtaking down carefully the existingCeiling fan/Exhaust fan/Geyserof any capacity, any make,any size and depositing the same Ceiling fan/Exhaust fan/Geyser inAGE E/M store yard all as specified and directed by the Engineer-in-Charge.Refixing the same Ceiling fan/Exhaust fan/Geyser carefully including necessary repair work for making functional the same and making electric connections complete all as specified and as directed. Note : Rates quoted by the contractor shall be deemed to include the cost of minor repair work of Ceiling Fan, Exhaust Fan and Geyser like replacement of Capacitor, bearing, fan rod etc in case of Ceiling Fan/Exhaust Fan if found unserviceable and replacement of thermostatein case of Geyser etc. |
| 169 | Disconnecting form elect connection andtaking down carefully the existingelectric energy meter of any capacity, any make,any size and depositing the same electric energy meter inAGE E/M store yard all as specified and directed by the Engineer-in-Charge.Refixing the same inside the LT Panel Box with Meter Compartments carefully incl necessary electric connections complete all as directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
