|
| 1 | Renovation and Modification of Existing Glass House |
| 2 | Removing rafters from roof including the material as directed with all leads, lifts, etc. complete |
| 3 | Removing wooden or AC partition including frame work and stacking the material as with all leads, lifts etc. complete |
| 4 | Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 5 | Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm X 19 mm inserted inside the hollow section of stiles rails top and bottom rails and two 19 X 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profiles shall be lipped with 10 mm (5mm X 2) thick X 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. |
| 6 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 7 | Wall painting with acrylic emulsion paint, having VOC content less han 50grams/ liters, of approved brand and manufracture, including applying additional coats wherever required, to achieve even shade and colour :one coat |
| 8 | Providing Galvanised steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted/bolted/welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. (for detailed justification refer SSR Item No.23.04) |
| 9 | Supply and Installation of translucent roof with DPI Flux standing seam mutlicell polycarbonate panel system. The system with complete assembly of co extruded UV protected mutlicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 8 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on GS structure (Will be paid Separately) with 3 one Numbers self- drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min.7000N (7KN) tested as per ISO 6892:1998 and IS 1608:2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/Glazing Bar for ends as required and including Door fitting. Panel shall be fixed over GS structural stell/GS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved make: FLUX by DPI Daylighting or approved equivalent The 6 mm thick panels shall be used for a roofing height of upto 15 mtrs. (for detailed justification refer SSR Item No. 51.187) |
| 10 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litres |
| 11 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 12 | Providing and fixing Chlorinated Polyvinly Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC palin & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includeds jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work-Exposed on wall 15 mm nominal dia Pipes |
| 13 | Providing & Fixing Real time Micro processor based control panel including Monitor panel, lights, Temperature, humidity con troller system & total electrical fittings in polyhouse shed. A) Technical feature of Photoperiodic Timer:- Cycle 24 hrs minimum ON/OFF period 30 minutes, Accuracy:+ 10 sec/day, Input:200-240 VAC, phase-Single, Ambiebt:5°C to 45°C, RH upto 85% normally, b) Technical feature of Temperature control system:- Temp. Range:0.1 to 59.9°C accuracy : + 1°C, Hysteresis: 0.4°C with sensor probe Pt-100 sensor cord 5 meter. Inputs: 200-240 VAC (110 VAC available on demand) phase-single, Ambient: 5°C to 45°C, RH upto 85% normally, c) Relative Humidity Control system: It Maintains RH in the range of + 4%, Range: 40% to 85%, Real RH: + 2% +1% digit (at 45%), Input: 220 V AC available on demand) phase single, Ambient: 5°C to 45°C, upto 95% complete as per direction of Engineer in Charge |
| 14 | Providing & Fixing shading system Internal and external by reflective, thermal aluminium screen silver with a notorised mechanism with a rack & pinion, driving shaft, pull rod clap, operated expanding & retracting mechanism inside the polyhouse, external shading by 75% shade net with a manual mechanism with rolling arrangements, complete as per direction of Engineer in charge |
| 15 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70 sq. mm. aliminium conductor complete erected with glands & lugs, on wall/trusses/pole or laid in provided trech/pipe as per specification no.CB-LT/AL |
| 16 | Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron previously painted in building including scaffolding, if necessary, cleaning and preparing surface (excluding primer coat) etc. complete |
| 17 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 18 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 19 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 20 | Supplying and erecting mains with 2x4 sq. mm FRLSH copper PVC insulated wire laid in conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 21 | Supplying and erecting mains with 2x6 sq. mm FRLSH copper PVC insulated wire laid in conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 22 | Supplying and eracting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 23 | Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 24 | Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete |
| 25 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 26 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 8 module duly erected. |
| 27 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected. |
| 28 | Supplying, erecting & marking FPMCB 6A to 32A, with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 29 | Supplying and erecting LED square circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5% THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty |
| 30 | Supplying and erecting LED square / circular Max. 25 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg. max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty |
| 31 | Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF |
| 32 | Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position as per specification no. FG-FN/EXF |
| 33 | Supplying 230/250V, 50Hz, evaporative air cooler (desert cooler) duct type having normal cooling capacity of 120cu.m per minute, with 17\" exhaust, min 75 to 80 litres water capacity tank with galvanised steel sheet with grade 350 minimum, leak or drip free, front grill shall be made of non-corrosive material, circular opening shall be more than fan sweep but not exceeding more than 25mm, filter pads shall be made of wood wool or any other substitute placed in non-corrosive wire mesh and tightened at places with side panels, noise level should not be more than 65dBA at 1m distance, 3 core copper cable minimum 2m length & metal casing of the electrical components, metal frame or chassis of cooler cabinet and all exposed metallic parts, shall be provided with proper earthking complete as per specification no. AP-WCR/DAC |
| 34 | Supplying, installing, testing & commissiong split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. Room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R23 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC |
| 35 | Supplying and erecting regular/ standard model ceiling fan of 900 / 1050 mm. sweep complete erected in position as per specification no. FG-FN/CF |
