|
| 1 | Providing Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn/PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work. etc complete complying with standard specification and as directed by departmental officers. (TNBP. Specification.No : Special) |
| 2 | Vimanam Height upto 50\"-0\" |
| 3 | Vimanam Height upto 15\"-0\" |
| 4 | Scraping the old plastering surface of vimanams/ wall carefully including isolated bricks or brick work without damaging the vari vargams, racking out the joints, cleaning the surfaces with water including all working in heights, hire charges for special tools, brushes etc complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : Special) |
| 5 | Painting with multi colour ( Panchavaranam ) using good water base exterior emulsion paint over a priming coat with approved premeir etc., complete for the vimanam and gopuram for ornamental works including cost and conveyance of all materials labour charges including artist painter working in heights , lifting materials cost of brushes etc. which including allextra for foldingsetc complete complying with standard specification and as directed by the departmental officers.( The brand ,colour,shade and quality of paint should be got approved by the Executive Engineer before use on works ) (TNBP. Specification.No : 66 & 66-A) |
| 6 | Painting two coats with approved first quality water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface with one coat of priming coat with approved primer including clearing preparing the surface curing in all floors including brushes etc., complete as per specification. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A ) |
| 7 | Restoration by providing herbal water wash(Combination of Venthayam powder 20%, Siyakai Powder 10%, Arapu powder 5%, Boonthi kottai powder 50%, Arugampul powder 3%, Nannari ver powder 3%, Vettiver powder 3%, Korai kizhangu powder 3%, and sembaruthi leaf powder 3% total 100%) are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : Special) |
| 8 | Pointing with Lime mortar 1:1.5 ( One Lime and one & half sand ) to restore the originalities of the existing granite stone structure including the charges of scaffolding arrangement if necessary with neat finishing including all tools and plants and labour etc all complete for cut stone masonry.etc complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 60) |
| 9 | Supplying & Paving flooring with cut stone of size 600 mm X 600 mm and another sizes suitable for site conditions with machine cut edges and not less than 100mm thick and single line fully dressed as directed by the departmental officers,and set in special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand )using freshly burnt lime (cao not less than 75 %)with jaggaery,galnut as directed and pointing with same special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand ) including cost and conveyance of all materials etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 4&35 and special ) |
| 10 | Single Line Dressing |
| 11 | Supplying and filling in foundation, basement, etc with crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 23,24) |
| 12 | Removal of old weathering course clearing carefully away from site as directed etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 16 &18) |
| 13 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 44 ) |
| 14 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in special grinding Lime Mortar 1:1.5 (One of Lime and One & half of M.sand)12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 44-H) |
| 15 | Plastering with lime Mortar 1:1.5 (One of lime and one and half of plastering sand), 12mm thick in all floors including neat finishing curing etc. complete complying with standard specification and as directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.) (TNBP. Specification.No : 56 &57 ) |
| 16 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) (TNBP. Specification.No : 66&66A ) |
| 17 | \"Electircal Work |
| 18 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated Single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (Data A) |
| 19 | Supply and fixing of 4\" 20W single LED Battern with LED 20 W Tube (Higher end) complete with TW round blocks with PVC unsheathed Copper leads from terminals to the fitting. (SD 443) |
| 20 | Supply and run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with suitable colour |
| 21 | Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe wall and ceiling with continuous earth Wire connection of 14 on SWG TC wire with painting of suitable colour |
| 22 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300mm down rod on the existing fan clam with side plates and cross arm of size 450mm (18\") (SD 502) |
| 23 | Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe ( class B) with 1 no.32 mm GI bend complete on the exiting post / on wall with with Smc box with 16A fuse unit PVC unscheathed copper leads with MS clamps and with Aluminium painting (SD 457) |
| 24 | Supply and fixing of 200W LED flood light fiting complete with angle iron frame supports with suitable clamp sets on the existing post / wall with PVC unsheathed copper leads MS camps and aluminum painting. (warm white karuvarual Top side) |
| 25 | Supply and fixing of 50W LED Focus /Flood light fitting complete on wall or ceiling with suitable MS clamp. (For Karuvarul Outer Side) (warm white) |
| 26 | Supply and fixing of 450 mm (18\") high speed AC Wall mounting fan complete with clamp set (Havells/Crompton/equivalent) etc. ( Havells/Crompton/Equivalent) |
| 27 | Supply and fixing of 3nos.6/16 A two module 3 pin socket, 3 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End |
| 28 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End |
| 29 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End |
| 30 | Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only |
| 31 | Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\" x 1-1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete and as directed by the department officers |
| 32 | Supply and run of 2 of 1.5 sq.mm. (22 /0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour |
| 33 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour |
| 34 | Supply and run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion with suitable colour |
| 35 | Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe wall and ceiling with continuous earth Wire connection of 14 on SWG TC wire with painting of suitable colour |
| 36 | Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains etc, complete |
| 37 | Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron up right and end supports for mains |
| 38 | Supply and fixing of 32A FP MCB in flush with sheet enclosure in wall with connection (For Wall Street Light Control) |
| 39 | Supplying and fixing of 2KVAAutomatic invertor ISI qualitiy with input voltage 180V - 260V and output voltage 200V - 230V 50Hz with 2 No 12V 150AH tubulur battery and testing complete with connection. as directed by the department officers |
| 40 | Supplying and fixing of DP Sheet steel enclosure box with 40A DP Charge Over MCB in flush with wall with earth connection, as directed by the department officers |
| 41 | Supply and run of 1 of No.8SWG copper wire in suitablePVC rigid pipe on wall / floor / ground for earth connection as directed by the department officers |
| 42 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class \"B\" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc. complete and as directed by the department officers |
| 43 | SUB TOTAL |
| 44 | GST 18 % Please Enable Macros to View BoQ information |
