|
| 1 | COMPRESSED DIE MOULDED PRESSURE SEAL RINGS PROFILE” J” IN WEDGE CROSS SECTION WITH TOP “C” & BOTTOM “V” EXTRUSION RESISTANT SS FIXED RING CAP. FLEXIBLE PURE GRAPHITE DIE MOULDED SEAL RING REINFORCED WITH SPECIAL ALLOY WIRE NET IN ENDLESS FORM HAVING DENSITY 1.8 GM/CC., SUITABLE FOR WITHSTAND TEMP UPTO 650° C & PRE UPTO-300 BAR. |
| 2 | Taper Seal Ring-SS304 Steel Cap 146 x 126 x 15, - 2 mmThickness of Taper end- 7 mm, Taper length – 11 mm |
| 3 | Taper Seal Ring-S304 Steel Cap 160 x140 x 18, - 2mm |
| 4 | Taper Seal Ring-S304 Steel Cap 136 x 110 x 25, Taper-12.50, Thickness at Taper end- 7.5 mm |
| 5 | COMPRESSED DIE MOULDED PRESSURE SEAL RINGS PROFILE” 1” IN RECTANGULAR CROSS SECTION WITH TOP “C” & BOTTOM OUTER “L” EXTRUSION RESISTANT MULTI LAYERED WIRE MESH. FLEXIBLE PURE GRAPHITE DIE MOULDED SEAL RING REINFORCED WITH SPECIAL ALLOY WIRE NET IN ENDLESS FORM HAVING DENSITY 1.8 GM/CC., SUITABLE FOR WITHSTAND TEMP UPTO 650° C & PRE UPTO-300 BAR |
| 6 | Pressure Seal Ring375 x 332 x 30 mm |
| 7 | SPIRAL WOUND GASKETS TYPE SWG “C” WITHOUT INNER & OUTER RING // MOC: SS316L AS WINDING + FLEXIBLE GRAPHITE AS FILLER |
| 8 | Spiral Wound Gasket body gasket 117.50 x 105 x 3.8 mm |
| 9 | Spiral Wound Gasket body gasket 140 x 105 x 3.8 mm |
| 10 | SPECIAL RING {SINGLE OBLIQUE CUT FORM} PREMIUM EXPANDED PURE, SELF LUBRICATED, CHEMICALLY INERT GRAPHITE FIBRE JACKTED WITH INCONNEL WIRE + HITHERM THERMOLUBE & CORROSION INHIBITOR] BRAIDED PACKING. (SUITABLE FOR TEMP. 650˚C & 500 BAR PRESSURE). PASSED FUGITIVE EMISSION AS PER SHELL MESC SPE 77/312; API 622 2ND EDITION, ISO 15848 PART 1 & BAM |
| 11 | Stem Packing 57 x 38 x 8 mm |
| 12 | Stem Packing 26 x16 x5 mm |
| 13 | Stem Packing 105 x 75.50 x 14 mm |
| 14 | Stem Packing 32 x 48 x 8 mm |
| 15 | COMPRESSED DIE MOULDED PRESSURE SEAL RINGS PROFILE “K” {IN RECTANGULAR-WEDGE CROSS SECTION FORM} WITH TOP-FULL & BOTTOM-OUTER EDGE UPTO 10 MM EXTRUSION RESISTANT SS FIXED RING CAP. FLEXIBLE PURE GRAPHITE DIE MOULDEDSEAL RING REINFORCED WITH SPECIAL ALLOY WIRE NET IN ENDLESS FORM HAVING DENSITY 1.8 GM/CC., SUITABLE FOR WITHSTAND TEMP UPTO 650° C & PRE UPTO 300 BAR |
| 16 | 24” #2500 MOV // 540/550*620*29.8/38 [Ө45°] |
| 17 | 18” #2500 MOV // 435/443*482.60*22.1/30 [Ө45°] |
| 18 | 22” #2500 MOV // 481*564.8*30.5-R |
| 19 | COMBINATION VALVE CARTSEAL - A CUSTOM-MADE PACKING SET OF VARIOUS SEALINGMATERIALS IN SETS {TOTAL 06 NOS RING} FORM, WHICH WOULD TAKE CARE OF ALL PARAMETERS OF A PARTICULAR APPLICATION THUS GIVING AN OPTIMUM SEAL. EACH SET CONSIST OF = 02 NOS SPL RING {IN SINGLE OBLIQUE CUT} + 04 NOS COMPRESSED DIE MOULDED RINGS {IN ENDLESS}.• SPECIAL RING {TOP & BOTTOM BULL RING} PREMIUM EXPANDEDPURE, SELF LUBRICATED, CHEMICALLY INERT GRAPHITE FIBRE JACKTED WITH INCONNEL WIRE + HITHERM THERMOLUBE & CORROSION INHIBITOR] BRAIDED PACKING. (SUITABLE FOR TEMP. 650˚C & 500 BAR PRESSURE).PASSED FUGITIVE EMISSION AS PER SHELL MESC SPE 77/312; API 622 2ND EDITION, ISO 15848 PART 1 & BAM• COMPRESSED DIE MOULDED RINGS {IN BETWEEN POSITION]– FLEXIBLE PUREGRAPHITE DIE MOULDED SEAL RING HAVING DENSITY 1.6 GM/CC, SUITABLE FOR WITHSTAND TEMP. UPTO 600° C & PRESSURE 300 BAR.BOTH PACKING WILL PROVIDE HIGHEST GRADE OF HEAT DISSIPATION WITHOUT ANY KIND OF STEM OR SHAFT OR GLAND PITTING / WEAR & TEAR / SCORING. EXPANDED GRAPHITE BEING SOFT AND MOLDABLE MOULD TO THE CAVITIES AND IRREGULARITIES INSIDE THE STUFFING BOX ON COMPRESSION THUS ENABLING A 100% SEALING WHICH IS REQUIRED FOR SUPERHEATED/SATURATED STEAM |
| 20 | 24” #2500 MOV // 114*152*18.5 |
| 21 | 18” #2500 MOV // 95*135*19 |
| 22 | 22” #2500 MOV // 108*146*20 Please Enable Macros to View BoQ information |
