Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-03-2026 | Amendment No 3 | Date | 04-04-2026 |
| 2 | 13-03-2026 | Amendment No 2 | Date | 27-03-2026 |
| 3 | 13-03-2026 | Amendment No 2 | Date | 27-03-2026 |
| 4 | 03-03-2026 | Amendment No 1 | Date | 20-03-2026 |
| 5 | 03-03-2026 | Amendment No 1 | Date | 20-03-2026 |
| 6 | 03-03-2026 | Amendment No 1 | Date | 20-03-2026 |
| Sl. No. | Item Description |
| 1 | M&L for providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 2 | M&L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. |
| 3 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position etc complete all as specified and as directed |
| 5 | M&L for Reinforced cement concrete(Nominal Mix) type BO 1:2:4 using 12.5mm graded stone aggregate as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, sunshades, canopies, deck slabs and in shelves and the like complete including necessary form workcomplete all as specified and directed. |
| 6 | M&L for Reinforced cement concrete(Nominal Mix) type BO 1:2:4 using 12.5mm graded stone aggregate as chajjas or similar works etc completed including necessary form complete all as specified and directed. |
| 7 | M&L for 10mm dia & over, mild steel TMT bars, cut to length, bent to shape required including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, quality of steel conforming to deformed or twisted bars Fe-410-W (Gde-E-250) complete all as specified and directed. |
| 8 | All as peritem No 7 here in before but 5mm dia and over up to and incl 10mm dia as in complete all as specified and directed. |
| 9 | M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) ccomplete all as specified and directed. Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. |
| 10 | M & L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as level course under floor tiling etc complete all as specified and directed. |
| 11 | M&L for glazed ceramic coloured tiles, avg 8 to 9 mm thick size (600mmx600mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:4, complete all as specified and directed . |
| 12 | M&L for glazed ceramic coloured tiles, avg 8 to 9 mm thick (match to floor), as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,including 10mm thick backing coat in CM 1:3,complete all as specified and directed. |
| 13 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (size 300x300mm), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,including 15mm thick screed bed in CM 1:4, complete including dismantling of existing tiles complete all as specified and directed. |
| 14 | M&L for glazed ceramic coloured tiles in vertical surface 450X350X7mm / 300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:3, complete including dismantling of existing tiles complete all as specified and directed. |
| 15 | Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and directed. |
| 16 | M&L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms including 20mm thick screed bed cement screed bed 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including rounded edges with shade of granite complete all as specified and directed., complete all as specified and directed. |
| 17 | M&L for 75 mm thick PCC (1:4:8) type D-2by using 40 mm graded stone aggregate as in sub base floor complete all as specified and directed. |
| 18 | M&L for Machine cut Kota stone slab flooring 18-20mm thick over 20mm thick cement screed bed laid (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 19 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid 10mm thick plaster (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed. |
| 20 | Demolition of brick work built in cement mortar or cement lime mortar, complete all as specified and directed. |
| 21 | M&L for old size brick work with flyash bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6, complete all as specified and directed. |
| 22 | M&L for old size brick work with sub class `B\" bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6 except bricks,complete all as specified and directed. |
| 23 | M&L old size Brick work with sub class \"B\" bricks strainght or curved on plan to any radius in half thick in CM 1:4 brick wall built in cement mortor, complete all as specified and directed . |
| 24 | M&L supplying and fixing of 20 mm bore CPVC pipes SDR 11 & plain CPVC SCH-40 fitting on walls / ceiling or laying in floors/wall including all fitting such as (brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union ,ball valves, flange and tank adaptor including taking down of existing GI tubing 15mm dia and connectioncomplete all as specified and directed . |
| 25 | M&L supplying and fixing of 25 mm bore CPVC pipes SDR 11 & plain CPVC SCH-40 fitting on walls / ceiling or laying in floors/wall including all fitting such as (brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union ,ball valves, flange and tank adaptor including taking down of existing GI tubing 20mm dia and connectioncomplete all as specified and directed . |
| 26 | S&F in repair 40 mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings for WHB on walls/ceiling /roof or laying in floors including all fitting such as (brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union ,ball valves, flange and tank adaptor including taking down of existing GI tubing 32/40mm dia and connection complete all as specified and directed. |
| 27 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank of capacity exceeding 250 litres but not exceeding 500 litres, complete all as specified and directed. |
| 28 | S&F in repair Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 25mm bore and fixed, complete all as specified and directed. |
| 29 | S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and directed. |
| 30 | S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore, complete all as specified and directed. |
| 31 | S&F in repairs PVC connections 600mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and directed. |
| 32 | S&F in repair 15 mm Angle valve/Stop valves, cast copper alloy , chromium plated, fancy type screwed down high pressure with crutch and butter fly handles, screwedwith pipes or for union, complete all as specified and directed . |
| 33 | S&F in repair two way CP brass Bip Cock 15mm dia with single handle and wall flange complete all as specified and directed. |
| 34 | S&F in repairs Brass chromium plated mode 2 in 1 WHB mixture 15mm dia including necessary fittings model Quarterhalf turn (SOLO) ofas complete all as specified & directed. |
| 35 | S&F in repairs brass chromium plated mode 3 in 1 Wall mixture15mm dia including necessary fittings model Quarterhalf turn (SOLO) as all specified and as directed. |
| 36 | S&F in repairs Brass chromium plated mode 2 in 1 Sink mixture15mm dia including necessary fittingsmodel Quarterhalf turn (SOLO) ofas complete all as specified & directed. |
| 37 | S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe, complete all as specified and directed . |
| 38 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, \"D\" type 60cm long between flanges of brass CP, complete all as specified and directed . |
| 39 | S&F in repair stainless steel sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed . |
| 40 | S&F in repairs Health Faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed . |
| 41 | S&F in repairs corner glass assmbley with stainless steel railing, fixed to plugs with chromium plated brass screws complete all as specified and directed . |
| 42 | S&F in repair vitreous china wash down water closet pan with P or S trap (pedestal pattern), white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and directed . |
| 43 | S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level, complete all as specified and directed . |
| 44 | S&F in repair vitreous china wash basin, white, flat back, size 450x300mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed . |
| 45 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 8mm thick WPC board or commercial plywood and fixed to wooded plugs with chromium plated brass screws and cup washers, complete all as specified and directed . |
| 46 | Taking down (Door) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames)complete all as specified and directed . |
| 47 | Taking down (Door) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames)complete all as specified and directed . |
| 48 | S&F in repairs Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all specified and directed .Note:- For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 49 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all specified and directed .(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 50 | S&F in repairs in providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all specified and directedNote: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 51 | S&F in repairs 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. complete all specified, directed, manufacturer\"s specification & drawings.Note: Fixture/fittings shall be measured & paid under relevant item |
| 52 | S&F in repairs Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all specified and directed.Note :- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 53 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all specified and directed Note:- stainless steel butt hinges shall be paid separately under relevant item. |
| 54 | S&F in repairs stainless steel butt hinges, size 150 mm complete, complete all as specified and directed . |
| 55 | S&F in repair for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed. |
| 56 | M&L for preparation of old/new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed . |
| 57 | Dismantling wrought iron or mild steel / cast iron work of any description (steel window & Grill)complete all as specified and directed. |
| 58 | S&F in repairs aluminium window as per TD drg No. CEDZ/TD-316with following specifications complete all as specified and directed :- (i)Outer frame of size40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded.(ii) Center mullion of size 40mmx65mm.(iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDMrubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter.(iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar.(v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi)Entire window shall be powder coated with pure polyster coat of any shade as approved by GE.(vii)Window shall be installed with silicone. |
| 59 | S&F in repairs aluminium window as per TD drg No. CEDZ/TD-316 with following specifications complete all as specified and directed :- (i)Outer frame of size40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded.(ii) Center mullion of size 40mmx65mm.(iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDMrubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter.(iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar.(v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi)Entire window shall be powder coated with pure polyster coat of any shade as approved by GE.(vii)Windwo shall have provision for installation of windowAC/Desert Cooler and provision of windwo glass shutter, wiremesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge.(viii)Window shall be installed with silicone. |
| 60 | S&F in repairs aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded center mullion size 40mmx65mm partly glazed/ gauzed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , MS wire mess , 3mm thick sheet glass etc. provision for fixing the exhaust fan complete all as specified and as directed. |
| 61 | M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders,framed balusters,walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290 Gde-E-165, complete all as specified and directed . |
| 62 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed . |
| 63 | M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed . |
| 64 | S&F in repairs Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed by Engr-in-charge., Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.Note :- All necessary fittings and fixtures like nickle plated clip hinges, knobs etc complete all as specified and directed.(a) Pattern & design of WPC board to be decided by GE.(b) Items like, magnetic Catcher, cupboard 100mm SS handle, and CP Clip/continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap (when open) is 30mm, Haps & Staple deemed to be included in the quoted rate. (c ) The quoted rates are deemed to be including dismantling/taking down of existing boards/shutter of any type and description. |
| 65 | S&F in repair 25 mm diaSS curtain rod 1.6mm thick, with fixingbrackets, side knobs of good quality as approved complete all as directed. |
| 66 | M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm, complete all as specified and directed . |
| 67 | S&F in repairs SS peg set of five fixing with wall, complete all as specified and directed . |
| 68 | S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 750mm x 750mm x 250mm, complete all as specified and directed . |
| 69 | S&F in repair stainless steelAISI 304 grade barrel tower bolt 200mm long, extruded section complete all as specified and directed . |
| 70 | S&F in repair stainless steel AISI 304 grade handle of size 200mm long,etc., complete all as specified and directed . |
| 71 | S&F in repairStainless steel of AE SI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed . |
| 72 | Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .Note :- Contractor shall be bounded to carryout repair / maint upto G+2 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. |
| 73 | M&L for 15 mm thick rendering with readymix plaster (as per manufaturer\"s instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement complete all as specified and directed .Note :- Contractor shall be bounded to carryout repair / maint upto G+2 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. |
| 74 | M&L for preparation of newly/old plastered surfaces of walls and to prepare the surface even and smoothand finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over and including 1mm thick wall careputtycomplete all as specified and directed . |
| 75 | M&L for 10 mm thick rendering with readyimix plaster (as per manufaturer\"s instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall including necessary scaffolding, formwork, safety precautions for multi storey bldgs up to G+2 stories complete all as specified as directed . |
| 76 | M&L for preparation of new surfaces (Plastered or un-plastered) of wall and applying two coats of oil bound distemper over and including 1-2mm wall care putty complete all as specified as directed . |
| 77 | M&L for old decorated surfaces plastered or unplastered surface of wall and complete removal of existing treatment by rubbing, brooming down, washing with water etc applying two coat of oil bond distemper on wall over and including 1-2mm wall care putty complete all as specified as directed . |
| 78 | M&L for 5 mm thick rendering on ceiling surfaces with redimix plaster (as per manufaturer\"s instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of bldg up to G+2 stories complete all as specified as directed . |
| 79 | M&L for preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper over and including 1-2mm wall care puttycomplete all as specified and directed . |
| 80 | M&L for old decorated surfaces plastered or unplastered surface of ceiling and complete removal of existing treatment by rubbing , brooming down, washing with water etc then applying two coat of oil bond distemperon ceiling over and including 1-2mm wall care puttycomplete all as specified and directed . |
| 81 | Cutting of vegetation/scrubs plant (girth not exceeding 300mm) from plumbing shaft, chajja, facia etc digging out the roots complete including scaffolding etc, and removing from cantonment area complete all as specified and directed . |
| 82 | M&L for dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortarcomplete all as specified and directed . |
| 83 | Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thicknessremoved or only a part thereof) and removing from cantonment area or as directed. |
| 84 | M&L forCement concrete type B-0, 1:2:4 (12.5mm graded aggregate)as inroof pedding , finished even and smooth without using extra cement ,includingcleaningthe concrete surface by steel wire brushes, up to three stories bldgs,complete all as specified and directed . |
| 85 | M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3)on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cementcomplete all as specified and directed .(Note:- Rate of Water proofing compound shall be included in quoted rates). |
| 86 | M&L for APP based polymeric membrane rough finish on one side minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints complete all as specified and directed . |
| 87 | S&F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on and including 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cutscomplete all as specified and directed ., including providing skirting up to 150 mm height along the parapet walls in the same manner. |
| 88 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form workcomplete all as specified and directed . |
| 89 | Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm.complete all as specified and directed . |
| 90 | S&F in repairs cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls/laid in trenches or in floor duly apply a coat of bitumenous black paint complete all as specified and directed. |
| 91 | S&F in repairs cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to walls/laid in trenches or in floor duly apply a coat of bitumenous black paint complete all as specified and directed. |
| 92 | S&F in repairs Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door/Tee, union etccomplete all as specified and directed . |
| 93 | S&F in repairs Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door/Tee, union etccomplete all as specified and directed . |
| 94 | S&F in repairs Stack clamps made out of 50mm by 5mm flat iron and 6mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe.complete all as specifiecd and directed. |
| 95 | S&F in repairs stack clamps made out of 50mm by 5mm flat iron and 6mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 75 mm borecomplete all as specified and directed . |
| 96 | S&F in repairs Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 75mm bore (fixed in repairs)complete all as specified and directed . |
| 97 | S&F in repairs Cast iron branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 100mm bore (fixed in repairs)complete all as specified and directed . |
| 98 | S&F in repairs cast ironvent cowl for 100mm dia pipe complete all as specified and directed . |
| 99 | S&F in repairs cast iron floor trap/nahani trap 75 mm, with grating includingjointing to waste pipe complete all as specified and directed . |
| 100 | S&F in repairs 125mm x 100mm salt glazed stone ware gully traps square & round mouthered trap \"P\" including case iron grating and fixed, including necessary excavation and earthwork, concrete in bed, surrounds, kerbs etc., and jointing to drains in CM 1:1, complete all as specified and directed . |
| 101 | S&F in repairs PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall including dismantling of existing SWR/PVC/Salt glazed ware/AC or reinforced concrete pipe set in cement mortar etc. complete all as specified and as directed. |
| 102 | S&F in repairs PVC (SWR) bend any radius for 110mm bore pipe complete all as specified and directed . |
| 103 | M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 50 mm thick, finished even and smooth without using extra cement complete all as specified and directed . |
| 104 | M&L for machine pressed, factory made, Glossy finishedchequered cement concrete tiles 30cmx30cmx(22-25)mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment with 20 mm thick screed bed are bedding layer of cement mortar (1:4) for laying floor finishes complete all as specified and directed . |
| 105 | S&F in repairs GRG (Glass Reinforced Gypsum) False Ceiling 12mm thick including aluminium framing work / grid 605 mm x 605mm for seanless ceiling comprises of aluminium perimeter including all accessories including dismantling of existing flase ceiling/ wooden false ceiling complete all as specified and directed . |
| 106 | M&L for cement plaster 15mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth without extra cement mixed with by adding permeability reducing polymer @ 250gms/sqm (6%) by weight of cementitious content at the time fixing with water as per manufacturer\"s recommendations incl all levelling the surface, curing etc.complete all as specified and directed . Note :- Rates for water proofing compound/polymer deemed to be included in the quoted rates. |
| 107 | M&L for providing and applying a bond coat of latex : water : cement - 1:4:6 consumption @ 100 gms/sqm on the brick wall surface by brush as per manufacturer\"s recommendations incl curing complete all as specified and directed . |
| 108 | M&L for Brick work with sub class \"B\" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:4complete all as specified and directed . |
| 109 | M& L forcement concrete 1:2:4 type B-1 (20mm graded stone crushed aggregate) as in coping etc complete all as specified and directed . |
| 110 | S&F in repairs precast factory made M-30 concrete saucer drain of 600mm long 300mm wideand 100 mm thick set in CM 1:4 including necessary earth work / demolition of existing PCC drain etc complete all as specified and directed. |
| 111 | M&L type B1 (1:2:4) (20mm graded stone crushed aggregate) providing RCC precast cement concrete as in cover slab for manhole and similar article with plain face and set in cement mortar 1:4 complete all as specified and directed. |
| 112 | M&L for reinforced concrete pipe Class NP-3, 150mm dia with coller laid jointed with CM 1:3 in trenches / floorincluding necessary excavation work and demolition of existing pipes any dia complete all as specified and directed. |
| 113 | M&L PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified and directed. |
| 114 | Taking down carefully the old U/S Copper point wiring (light, fan, socket or power) complete Fitting suchas switch, ceiling roses,pendants,socket, regulators , all type light Fitting, security light Ding Dong Bell , etcand making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finishcomplete all as specified and directed . |
| 115 | M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated single core unsheathed FRLS 1100 volts grade electrical cable drawn existing concealed PVC conduit in wall and ceiling and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes of min thickness 1.2 mm with 120 GSM Zinc coating including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etcof required size completeincluding 1.5 sqmm copper cable Single core PVC insulated unsheathed earth continuity wire to common earth and connected to earth dolly complete all as specified and directed.Notes (a): The rates are inclusive of providing point wiring on casing caping if there is blockage/damage in existing conduit on ceiling.(b) :The rates are inclusive of cutting / chasing and making good disturbed surface with CM 1:3 and same finishes with the adjoining surface of disturbed area with OBD/ Colour wash/ white wash complete |
| 116 | All as per item No 115 here-in-before but one socket outlet 5 Amps on same board with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed.. |
| 117 | All as per item No 115 here-in-before but one socket outlet 5 Amps on independent board and through new concealed conduit complete with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed.. |
| 118 | All as per item No 115 here-in-before but one socket outlet 15 Amps on independent board and through new concealed conduit complete with cables 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing complete all as specified and directed.. |
| 119 | All as per item No 115 here-in-before but one AC pointon independent board and through new concealed conduit complete with cables 4 Sqmm size for phase and neutral and 4 Sqmm for earthing complete all as specified and directed.. |
| 120 | All as per item No 115 here-in-before but one light point controlled by two 2-way switch 230 volts with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed.. |
| 121 | S & FSwitch Modular type switch, 6 A, 1- way 1 Module switch with finger proof terminal complete all as specified and directed . |
| 122 | S & F modular type 2/3 pin combined shuttered type 6A socket 2 Modulecomplete all as specified and directed . |
| 123 | S & FSwitch Modular type switch, 6 A, 2- way 1 Module switch with finger proof terminal complete all as specified and directed . |
| 124 | S & FSwitch Modular type switch, 16 A ,1- way 1 module switch with finger proof terminal complete all as specified and directed . |
| 125 | S & F modular type 2/3 pin combined shuttered type 16 A, socket 2 Module,complete all as specified and directed |
| 126 | S & F AC modular box with MCB 20 Amps complete all as specified and directed . |
| 127 | S & F ceiling rose complete all as specified and directed . |
| 128 | S&F electric bell ding dong AC, 230 volts single phase complete all as specified and directed. |
| 129 | S&F Bell push modular type 1M, 5/6 Amp, complete all as specified and directed. |
| 130 | S&F surface mounting LED Integrated Aluminum Batten luminaries Polycarbonate co-extrusiontube for Not less than 20 Watt LED light housing.Fixture should have minimum system lumen of 2000lm & minimum efficiencyat system level >=120 lumens/Watt, life of fixture 50K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240V AC An operating voltage Range of 140-270V including all connection up to ceiling rose complete all as specified and directed . |
| 131 | S&F surface mounting LED Integrated Aluminum Batten luminaries Polycarbonate co-extrusiontube for Not less than 10 Watt LED light housing.Fixture should have minimum system lumen of 1000 lm& minimum efficiencyat system level >=120 lumens/Watt, life of fixture 50K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240 V AC.An operating voltage Range of 140-270V including all connection up to ceiling rose complete all as specified and directed. |
| 132 | Supply and fix not less than 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria,Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmmcopper conductor flexible wire fixed completeallas specified and directed. |
| 133 | S&F inverter LED lamp 12 Watt rechargeable for home, cool daylight, Basecomplete all as specified and directed |
| 134 | Supply and fixing round shape 12 watt 220 volts AC surface type with 1100 lumen output ,efficiency not less than 100lumen/watt ,Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. |
| 135 | S & F of Decorative wall light mounting suitable for LED Lamp upto 15 Watt complete with all connections all as specified and directed. |
| 136 | S & F 35 Watt security light high efficiency long life LED module with LENS type LED package mounted on MCPCB, Fixture should haveminimum efficiencyat system level >=120 lumens/Watt, integral SMPS based constant current electronic LED driver with THD<10% surge voltage protection of > 5.0 KV, CRI>80, PF>0.95,CCT 4000-6500K and other safety tests as per IS:15885( part-2/sec-13),IP 66 protection high efficiency polycarbonate cover with integrated lens housed in pressure die cast aluminim alloy heat sink for effective thermal management strudiness excellent corrosion resistance separate optical and control gear compartment & Top opening for easy maintanance suitable for side entry wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible copper cunductor cable of appropriate size and 1.5m long bracket having 40mm diameter light grade GI pipe including GI clamp nuts bolts & washers with two coats of synthetic enemal paint over a coat of oxide primer complete all as specified and directed . |
| 137 | Supply and fixing Exhaust fan300 mm sweep, 900 RPM, metallic body including metalic blade , single phase 240 volts AC 50 Hzand connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete including taking down and depositing itto MES store yardall as specified and directed. |
| 138 | Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with remote control, Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade, 30 cm long down road, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete including taking down and keeping in safe custody and depositing it to MES store yard all as specified and directed . |
| 139 | Supply, installing, testing and commissioning factory made and tested LT Panel Indoor type Wall mounted,suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars of capacity 250 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, and made out of 2.00 mm thick CRCA mild steel sheet, front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor PVC cable of adequate size but not less than 1.5 sqmmcomplete all as specified and directed, duly anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade.including taking down of old indoor Panel Make of Meter Board:- Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. |
| 140 | BUS BAR CHAMBER:- (a) 250 Amps 4 Strips, Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings.INSTRUMENT CHAMBER:- (i) Digital Volt Meter, 96X96mm, flush type rated 0-500 V, with Inbuilt selector switch- 01 Set.(ii)Digital Amp Meter, 96X96mm, flush type rated 0-150 A, with Inbuilt Selector switch- 01 Set. (iii) C.T\"s 150/5 A CL 1.0 Tape Wound- 01 Set. (Set of three)(iv) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three).(v) Protection MCB 6 A SP C Series- 1 Set. (Set of three). Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider.INCOMING SUPPLY:- (i) MCCB 125 Amps 36 KA , 4 Pole with Adjustable thermal & Fixed magnetic setting release 415 Volts, 50Hz =01 No., Make of MCCB:-L&T/Siemens / Legrand/ Schneider/ HPL.OUTGOING SUPPLY:- (i) MCB SPN 63 Amps, 240 volts, 50Hz, rupturing capacity 10 KA C Curve= 5 Nos., (ii) MCB SP 10 Amps, 240 volts, 50Hz, rupturing capacity 10 KA C Curve= 1 No.,Make of MCB:- L&T/ Siemens/ Legrand/ Schneider/HPL.(iii) Provision of meter box of size 350x 250x 150mm for 5 Nos of qtr Make: Schneider/ Secure/ L&T/ HPL.(iv) DMC Connector 2 way 63 A for outgoing submain supply - 5 Nos.Panel wiring for control circuit with copper flexible 1.5 Sq mm& powerwiring minimum 10 Sqmm flexible.Note- Quated Plate shall be included of taking down of old rusted unserviceable LT Panel. |
| 141 | The panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54(IS/IEC : 61439 (Part-1), 2011& IS/IEC : 61439 (Part-2) 2011)2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011)3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 6300 A with rated insulation voltage 660V5. ISO 9001 CERTIFIED |
| 142 | Supply and fixin replacement ofSPN 12 Way double door mettalic DB with rubber gasket conforming to IEC 61439-3 suitable for flush / surface mounting having 100 A copper busbar fully shrouded neutral bar earth bar wire set & cable ties for cable management pre fiited sheet etc. Having IK 09 & IP 43 protection complete including taking down of old DB all as specified in IS 732:2019complete all as specified and directed . |
| 143 | M&L in replacement MCB SPN \"C\" curve 32 Amps 240 Volts , 10 KA complete all as specified and directed. |
| 144 | M&L in replacement MCB SP \"C\" curve 06 to 32 Amps 240 Volts 10 KA complete all as specified and directed. |
| 145 | S &F in replacement for Earthing complete withgalvanized steel earth plate 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m belownormal groundlevel, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wirefrom earth electrode, supply and laying charcoaldust, common salt, PCC (1:2:4)type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4)type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars@75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for wateringcomplete all asshown in drg and connected to earth test point including testing complete all as specified and directed . |
| 146 | M & L Earth continuity conductor or main earthing lead fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and directed . |
| 147 | Supply & fixing of water storage heater, 5 star, Glass lined enamel coated incoloy heating element ,Digital temperature display, Feather touch buttons, Shock resistant injection moulded ABS body, IPX4 waterproof technology, Tank design is suitable to withstand 8 bar pressure(Geyser) of capacity 25 litre ISI mark, , AC, electric, 415 volt, complete , 3 core lead, includingPlug top, safety valve,including electric and making good to disturbed surfaceincluding taking down existing water storage heater complete all as specified and directed.Notes :- (i)Existing old geyser to be taken down from wall and deposit to the MES Yard for custody. (ii) Electric switch for geyser of 16 Amps shall be provided on main switch board of the bathroom and socket outlet shall be provided near the geyser and will be measured as 16 amps power wiring against item no.5 |
| 148 | S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed. |
| 149 | Taking down unserviceable Submain wiringof any size complete and making good disturbed surface complete all as specified and directed. |
| 150 | M&L for sub main wiring with two single core PVC insulated FRLScables with stranded copper conductors 10 Sqmm, 450/1100 Volts grade on & including PVC Conduit25 mm medium grade complete with conduit accessories and copper cable 10 sqmm continuous earth wire complete all as specified and directed (Two runs of cable with 01 earth wire shall be measured as one length)Note:- The quoted rate shall be inclusive of taking down old submain wiring, making good the disturbed surface and same surface finishes with the adjoining surface of disturbed area ie with OBD/colour wash/white wash and wall putty where ever required. |
| 151 | Supply and fixing of PVC conduit medium grade of size 15mm TV connection and Socket /Telephone socket complete all as specified and directed . |
| 152 | Supply and fixing TV Co-Axial Socket 1 module complete all as specified and directed . |
| 153 | Supply and fixing Flush metal box 1 module complete all as specified and directed . |
| 154 | Supply and fixing white cover plate with frame 1 module complete all as specified and directed . |
| 155 | Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V , 50 Hz RPM 1200, copper winding of sweep 250 mm complete all as specified and directed |
| 156 | M& L for opening of hole through out the wall as suitable for exhaust fan of size 250mm sweep and making good to disturbed surface complete all as specified and directed .Note - The rate are inclusive in respect of under this item as above hole opening civil work. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
