|
| 1 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws etc complete all as specified and directed.Note :Dismantling of old chowkat and S&F new chowkat shall be measured and paid separately under relevant items. |
| 2 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed. |
| 3 | Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed. |
| 4 | Taking down Chowkats or frameswith shutters ( without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed. |
| 5 | Taking down steel window/ventilators n.exc 1.5 Sqm (without taking off shutter from frame including guard bars) of any description complete all as specified and as directed. |
| 6 | Taking down steel window/ventilators exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutter from frame including guard bars) of any description complete all as specified and as directed. |
| 7 | Taking down cup board shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed. |
| 8 | Dismantling Of Stone Chowkhat of any description complete all as specified and directed. |
| 9 | Dismantling of stone chowkats of any descriptioncomplete all as specified and as directed. |
| 10 | S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified & directed |
| 11 | S&F 35mm thick IInd class hard wood factory made panelled door shutter (two panel) with lock rail and panelof 9mmBWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed |
| 12 | S&F 35 mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed |
| 13 | S&F factory made steel windows with side hung shutters including projecting type box hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chromate primer complete all as specified and directed. |
| 14 | S&F factory made steel windows with side hung shutters including projecting type box hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chromate primer complete all as specified and directed. |
| 15 | S&F steel ventilator with top hung shutter including hinges steel peg stay complete including taking down complete all as specified and directed. |
| 16 | M&L for framed work as in doors or gates of angle or other section with gusset plates( Fe 410-W Gde E-240), rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, cooler stands (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed. |
| 17 | S&F 300mm long mild steel sliding door bolt, bolt type, stove enamelled black,with bright bolt 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate, fitted to shutters complete all as specified and directed. |
| 18 | S&F in repair300mm long mild steel sliding door bolt, bolt type, stove enamelled black,with bright bolt 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate,fitted to shutters complete all as specified and directed. |
| 19 | S&F butt hinges,medium weight, cold rolled, mild steel,100mm long,fixed to angle iron chowkhats including welding complete all as specified and directed. |
| 20 | M&Lpreparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed. |
| 21 | M&L preparation to new or previously untreated wooden surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 22 | S&F in repairs MS dropery rod 19/20 mm dia fancy type with PVC coloured sleevesfixed with suitable brackets two Nos & PVC colour bowl two Nos at end for each door/window complete all as specified and directed. |
| 23 | S&F in repairs SS Curtain rod 19/20mm dia as including suitable fancy type bracketsand bowl for each door/ window fixed wity rawl plug, screw etc complete all as specified and directed. |
| 24 | Cutting holes in brick walls Exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TYpe B1 as required complete all as specified and directed. |
| 25 | Cutting holes in brick walls not exc Half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TYpe B1 as required complete all as specified and directed. |
| 26 | S&F 200mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed. |
| 27 | S&F in repair 200mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed. |
| 28 | S&F 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed. |
| 29 | S&F in repair 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed. |
| 30 | S&F 150mm anodised aluminium handles, cast type complete all as specified & directed. |
| 31 | S&F in repair 150mm anodised aluminium handles, cast type complete all as specified & directed. |
| 32 | S&F extruded aluminium alloy with galvanised mild steel hing pin, butt hinges 100mm long complete all as specified & directed. |
| 33 | Mild steel 1.6 mm thick , plain, black sheetin hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, cloutnails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed. |
| 34 | M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders;, cooler stand framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165 |
| 35 | M&L for flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed. |
| 36 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 37 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 38 | Hacking out old broken glass of any thickness/size of any description from steel frame fixed with clips and putty and S&F with 4mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane complete all as specified and directed. |
| 39 | Hacking out old broken glass of any thickness/size of any description from steel frame fixed with clips and putty and S&F with 4mm thick figured glass pin headed type fixed with clips and putty completed in squares not exc 0.50 Sqm each pane complete all as specified and directed. |
| 40 | S&F 4mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane complete all as specified and directed. |
| 41 | S&F 4mm thick figured glass pin headed type fixed with clips and putty completed in squares not exc 0.50 Sqm each pane complete all as specified and directed. |
| 42 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed. |
| 43 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed. |
| 44 | S.F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing |
| 45 | S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made of out of MS tube for top & bottam rail m.s frame shall be covered with heat moulded plain colour PVC \"C\" channel having a pvc sheet stripp of 20mm width stuck inside with solvent cement for style & plain colour pvc sheet for top rail,lock rail & bottam rail on either side & as gap insert for top rail & bottam rail, pannelling of plain colour pvc sheet fitted in m.s frame welded sealed to the style & rail with suitable pvc sheet bedding,& jointed togather with solvent cementS&F in the frame at site as per specifaction & drawing. |
| 46 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face& 2 mmplain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed. |
| 47 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 48 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 49 | S & F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface asoriginal complete all as specified and as directed.Note :-The measurement shall be taken of front elevation and not girthwise. |
| 50 | S&F powder coatedanodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 51 | S&F Powder coated anodized aluminium door shutters, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles 2 Nos in each door, hinges type B-21 100mm long (3 Nos), complete all as specified & as directed. |
| 52 | S&FPowder coatedanodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. |
| 53 | S&F forpowder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed. |
| 54 | S&FSheet glass 5.5mm thick selectedqualityBlack Colour and glazing with beading and rubber gasket exc 0.5 Sqm in each pane complete all as specified and directed. |
| 55 | Supply Only Sheet Glass 5.5mm thick selected quality Black Colour and Glazing with beading and rubber gasket exc 0.5 Sqm in each pane complete all as specified and directed. |
| 56 | S&F brass mortice lock ,vertical type size 65mm, 4 levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed. |
| 57 | S&F in repairbrass mortice lock ,vertical type size 65mm ,4 levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed. |
| 58 | S&F closed hydraulically regulated ,designation No 3 ,aluminium(Die cast) body,universal type (ISI marked) complete all as specified and directed. |
| 59 | S&F In repair closed hydraulically regulated ,designation No 3 ,aluminium(Die cast) body,universal type (ISI marked) complete all as specified and directed. |
| 60 | Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 61 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified & directed |
| 62 | M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 63 | M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 64 | M&L for rendering 15mm thick internal surfaces in cement mortar 1:6 on fair faces of stone masonryor concrete surfaces finishedeven and fair without using extra cement complete all as specified and directed. |
| 65 | M&L for applying two coats of distemper oil emulsion over 2mm thick wall care putty on newly plaster surface of walls complete all as specified and directed. |
| 66 | M & L for complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over a coat of primer over and inclucluding 2mm thick Birla white wall care putty complete all as specified and as directed. |
| 67 | M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed by Engr- in - Charge. |
| 68 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing the domolisd material out side of defence land complete all as specified and directed. |
| 69 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed |
| 70 | Material and labourfor 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-In-Charge. |
| 71 | Material and labour for coloured joint free Non skid ceramic tiles7 to 8mm thick area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm,as in floors etc., laid over and including15 mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 72 | M&L Glazed ceramic coloured tiles (Ist quality) in vertical surface 450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement& Sand Mortar 1:4complete allas specified and directed. |
| 73 | M&L For False Ceiling Complete With Armgyp-FB ceiling Tiles of Size 595x595,9mm thick (as approved by GE) fixed with and including galvanised iron Powder coated inverted \"Tee\" or \"L\" section (Concealed GI frame Work) Suspended From Ceiling with provision of Galvanised wire 4mm dia and wall tapping screws including butterfly clips,hold down clips for fixing the board to frame complete all as per manufacturer\"s instruction, complete all as directed and specified. |
| 74 | Repair to Wooden Shutter or rescuring or easing & adjusting without taking down shutter exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 75 | Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of)etcin all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed. |
| 76 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding,laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted inmin slope 1:30 over roof complete all as specified & directed. |
| 77 | M&L screed laid 15mm thick in CM 1:4with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed. |
| 78 | M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. mincluding cleaning surfacesover bituminious primer complete all as specified & directed. |
| 79 | M&LAPP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by toarch application method with overlaps 100mm on length side and 100mm on the width side as per manufacture,s instructions with fabric (wt not less than 150 gms/sqm) on primed surface including two coat of refelective silver aluminium paint over APP membrane complete all as specified. Note : (i) Coved fillets in PCC (1:24) Type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, applied @1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm.(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing.(iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators.(iv) In case of store masonry parapet wall etc a groove of size 25mmx25mm (minimum) shall be made in coved fillet at the junction of roof and parapet wall/mumty chimney/other vertical surfaces and polymeric membrane inserted in groove and sealed with paving bitumen.(v) Above aspects are deemed to be included in quoted rate. |
| 80 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 81 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I including dismantaling existing water tanks complete all as specified and directed. |
| 82 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position with ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms all as specified in SSR Part I including dismantaling existing water tanks complete all as specified and directed. |
| 83 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as specified and directed. |
| 84 | S&F for 20mm diasteel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed. |
| 85 | S&F in repairs ball valves of 20mm dia, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed, minimum weight - 210 gms of including taking down existing ball valves any type complete all as specified and directed.Make : Prayag or equivalent as approved by GE. |
