|
| 1 | Civil |
| 2 | Dismantling brick masonry in cement mortor and stacking the material as directed with all l eads, lifts etc. complete. |
| 3 | Removing G.I. sheet from roof or ceiling and stacking them as directed with all leads and lifts etc. complete |
| 4 | Removing other type truss below 5 metres span from roof and stacking the materials as directed with all leads and lifts etc. complets |
| 5 | Removing cement tiles, or marble or polished shahabad floor or dado with out bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 6 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. |
| 7 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. (PWD S.S.R. 22-23 Item Serial No.897 & Item No.27.05) |
| 8 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (PWD S.S.R. 22-23 Item Serial No.963 & Item No.32.11/Page-209). |
| 9 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.(PWD S.S.R. 22-23 Item Serial No.958 & Item No.32.04/Page-209). |
| 10 | Providing and applying white-wash in three coat on old / new plastered or masonry surface sand asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.(PWD S.S.R. 22-23 Item Serial No.1097, 1098. & Item No.36.02/Page-227 & Item No.36.03/Page-227). |
| 11 | Providing & applying waterproof cement paint three coats on plastered or masonary surface of approved manufacturer and of approved colour including primer coat scafolding & preparing the surface watering for two days complete. (Bd.O.8/406).(PWD S.S.R. 22-23 Item Serial No.1085 & Item No.35.15/Page-224). |
| 12 | Providing and fixing rolling shutter fabricated from steell at hsofminimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fastarr angements, M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size attopand safety device sincluding mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade castir on or mild steel and one coat of redlead primer etc. complete.(I.S.62481979) (Without mechanical gear) (PWD S.S.R. 22-23 Item Serial No.1217 & Item No. 39.24/Page-248). |
| 13 | Providing and fixing steel window of various sizes as per detailed drawing without hotdip zinc coating, with out ventilators, including fabricating/ glazing with plain/ obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars12 mm square at 10 cm c/c.). (PWD S.S.R. 22-23 Item Serial No.1223 & Item No.39.30/Page-249) |
| 14 | Providing structural steel work in trusses,other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2coats of oil painting approved quality and shade etc. complete. (PWD S.S.R. 22-23 Item Serial No.819 & Item No. 23.04/P.no.819) |
| 15 | Providing and fixing colour coated Zincalume(R) AZ150 (min150gms/sq.mt.total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5mmTCT), Hi-strength steel with min.550 MP a yield strength, metallic hot dip coated with Aluminium-Zincalloy (55%aluminium 43.4% zinc1.6% silicon) with COLORBOND (R) steel quality super durable polye ster paint coat (with in organic pigment). The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050mm effective cover width and nominal 25-30mm deep ribs with subtle square fluting in the five panat nominal 180-250mm center-to-center.The end rib shall be designed for anti-capillary groove. and return leg.The feed material should have coil manufacturers product details marke daregular interval .Including fasteners with min.fastened with min.25umZinc-Tin alloy coated, Hexhead,self-drillings crew etc.complete. (weight of profile 4.52 Kilogram/ One Square Metre) (PWD S.S.R. 22-23 Item Serial No.1174 & Item No. 38.34/P.no.236) |
| 16 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. Ridge.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min.fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface Width).(PWD S.S.R. 22-23 Item Serial No.1175 & Item No. 38.35/P.no.237) |
| 17 | Providing and fixing wind oppareted tarbo ventiletar systim (24 inch dia.) over exsiting roof including cutting of sheet ,propar fixing in position to true line & level with all fixtures & fastning, providing 0.8mm thick FRP sheet for covering area between roof and fan so as to provide waterfoof joints with approved water proffing compound making good the roof surface including cleaning etc. complete (General application for all types of roofs for ventilation & day light parpose at terrace [As directed by Engineer in charge]. (Jalgaon D.S.R.304 /123) |
| 18 | Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. (PWD S.S.R. 22-23 Item Serial No.1017 & Item No. 33.30/Page-216) |
| 19 | TRUCK Pointing for ucr masonary Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete. |
| 20 | Shed Royalty |
| 21 | a) For sand |
| 22 | Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social,Health and Safety (ESHS) risks and SHS Code of Conduct Please Enable Macros to View BoQ information |
