Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise as directed and as specified. |
| 3 | Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed |
| 4 | Material and labour for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified. |
| 5 | Material and labour for non skid ceramic (colored),7 to 8 mm thick as in floor area of each tile exceeding 0.6 Sqm but n exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to matchincl and over screed bed or beeding layers of mortar 15mm thick in CM 1:4 in floors, complete all as specified and directed.complete all as specified and directed. |
| 6 | Material and labour for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified |
| 7 | Material and labour for Non - skid Ceramic tiles light shade7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick in CM 1:4 screed bed all as specified. |
| 8 | Material and labour for Non - skid Ceramic tiles light shade7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified |
| 9 | Material and labour for Vitrified Ceramic tiles light shade 10 mm thick , (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:4 |
| 10 | All as per item No 9 above but on vertical surfaces incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified |
| 11 | Material and labour pre polished machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified. |
| 12 | Material and labour Pre polished machine cut Kota stone slab 20-25 mm thick as in riser to step including 10 mm thick rendringin CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified. |
| 13 | Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified. |
| 14 | Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed. |
| 15 | Material and labour for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3) complete all as specified. |
| 16 | Demolition of reinforced brickworkinsuspended slabs,beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) |
| 17 | Supply and fixing providing SS-316 grade hand rail with 50 mm dia hand rail, middle rail 15 mm dia, and vertical pole 1.00 mtr height of 25 mm dia at 600 mm C/C including necessary cups/fittings, grouting complete all as specified and directed.Note : Railing comprising of hand rail, middle rails vertical post and accessories shall be considered as one unit length |
| 18 | Taking down of existing un-serviceable water proofing treatment, taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed |
| 19 | Material and labour for providing screed bed or bedding layer of mortar 10 mm thick for laying floor finishes in CM 1:3 with water proofing compound @ 3 % by weight of cement complete all as specified and directed.Note : WPC shall be measured and paid seperately. |
| 20 | Providing & applyingrising damp-proof course system with single component ready to use damp- proof coating Roff Hydamp :1. Surface preparation thoroughly brush and clean all laltance, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc.All large voids or hollow portions must be removed and re-plastered , Non -moving cracks having width upto 5 mm must be filled with polymer based brack filler.2.APPLICATION :Apply the first coat of Dr fixit Damp guard Classic with a paint brushdirectly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs .Apply on e part of DAMP GUARD mixed chemical and 2 parts of OPC whte cement / Birla putty and make the putty , apply putty on the entire surface area.Allow it to dry forat least 3-4 hours .Apply the Final coat of Dr Fixit Damp guard classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint complete all as specified and as directed. |
| 21 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed |
| 22 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs. |
| 23 | Supply and fixing500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed. |
| 24 | Dismantling water tanks and removing to store exceeding 500 ltrs and n exc 1000 ltrs complete all as specified and directed. |
| 25 | Supply and fixing 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed. |
| 26 | Material and labour for PCC (1:3:6) Type C-2 with using 40mm graded stone aggregates as in platform for PVC tank all complete as specified and as directed. |
| 27 | Supply and fixing 20 mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 28 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting not exc 10 cm girth complete all as specified and directed |
| 29 | Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 30 | Supplying and laying of20 mmbore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laid concealedin floor or wallincluding all fittingssuitable for fixing of plumbing fixture complete all as specified |
| 31 | Supplying and laying of16 mmbore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laidconcealedin floor or wallincluding all fittingssuitable for fixing of plumbing fixture complete all as specified |
| 32 | Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 33 | Supply and fixing 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 34 | Refixing 20mm old steel tubing and connecting in new or old position (walls, ceiling, floors)etc, complete all as specified and directed. |
| 35 | Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 36 | Material and labour for rendering on fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @.2 liter per bagof cement or as per manufacturer\"s instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.(WPL shall be measured and paid seperately. |
| 37 | Material and labour for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate in roof etc. as levelling coarse etc. all as specified and as directed by Engineer-in-Charge |
| 38 | Material and labour 10 mm thick rendering in cement mortar 1:6 onfair face of brick work or concrete surfacefinishing the surfaceeven and smooth without using exra cementcomplete all as specified and directed. |
| 39 | Material and labour newlyplastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitningcomplete all as specified and directed. |
| 40 | Complete removal of existing treatment ofold plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed. |
| 41 | Material and labour for preparation of old decorated surface of ceilling (plastered/unplastered)by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applyingone coat of oil bound distember on ceilings. |
| 42 | Material and labour for preparationof new surfaces of ceiling plasteredandapplying two coat of oil bound distemper over one priming coatcomplete all as specified and directed |
| 43 | Material and labour complete removal of existing treatment and applying three coat of white washing on wall surface complete all as specified and directed. |
| 44 | Material and labour guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC /CICO/PIDILITE)@2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness30 mm all as per manufactureres instruction.(Upto 5 mtr height) including necessary chiping/taking down loose concrete along with application of rust remover for old rusted bars and rebar if required followed by application of anti corrosive paint over old /rebar as per manufacturers instruction completeall as specified and directeddirected. |
| 45 | Supply and fixing mild steel welded fabric ofweight exe 3.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified. |
| 46 | Material and labour for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smoothwithout using extra cement. |
| 47 | Material and labour preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed. |
| 48 | Material and labour complete removal of existing treatment of ceiling and applying three coats of white washing complete all as specified and directed. |
| 49 | Material and labour for Complete removal of existing treatment ofold plastered surfaces of walls and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed. |
| 50 | Material and labour for Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work complete all as specified and directed. |
| 51 | Material and labour for preparationof newly plastered and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 52 | Demolition of brick work built in cement mortar of any description. |
| 53 | Material and labour for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 54 | Material and labour brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4 by using old size bricks complete. |
| 55 | Material and labour for providing plain cementconcrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in benching, copings, bed block for filing hollow space of steel chowkhats,including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 56 | Material and labourfor 15mm thick rendering on vertical side of sunken floor of brick/ concrete surfaces in CM (1:3) mixed with water proofing compound as per manufacture instrution and finished even and smooth without using extra cement complete all as specified. (Note : WPC shall be measured and paid seperately) |
| 57 | Material and labour for PCC 1:1½:3 nominal mix type A-0 using 12.5 mm graded stone aggregate mixed with water proofing compound as per manufacture instruction on bottom of sunken portion with slope towards spout including applying two coat of polymeric base chemical in the top surface of PCC and side of sunken portion complete all as specified. (Note : WPC shall be measured and paid seperately) |
| 58 | Material and labour for PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in lean concrete in sunken floors complete all as specified and directed. |
| 59 | Supply and fixing 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and as directed. |
| 60 | Supply and fixing in repairs vitreous china wash basin, white, flat back, size550x400m excluding taps, waste , chain & plug & porcelain stopperincluding brackets incl cutting for pinning in ends of bracketes or erecting standand fixing and supply and waste pipe complete all as specified and directed |
| 61 | Supply and fixing in repairs 600mm x 450 mm bevelled edge mirrorof selected quality, mounted on 6 mm thick AC plain building board or commercial plywood and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified and as directed. |
| 62 | Supply and fixing in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed. |
| 63 | Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding. |
| 64 | Supply and fixing in repair vitreous china wash down water closet pan (Cascade type), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete |
| 65 | Supply and fixing in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device complete all as directed. |
| 66 | Supply and fixing in repairs angular stop cock with wall flange of Jaquar cat part no QQT -7053 or equivalent complete all as specified and directed |
| 67 | Supply only central hole basin mixer for WHB complete all as specified and directed. |
| 68 | Supply and fixing in repairSStowel rail complete all as specified and directed. |
| 69 | Supply and fixing in repairs soap dish of Jaquar cat part no AKP-35731P or equivalent complete all as speified and directed |
| 70 | Supply and fixing in repair CP toilet paper holder complete all as specified and directed. |
| 71 | Supply and fixing in repair health faucet with one meter tube and hook complete all as specified and directed. |
| 72 | Supply and fixing in repairsglass shelf assemblystraight / corner with chromium platedbrass bars complete all as specified. |
| 73 | Supply and fixing stainless steel kitchen plate rack 1mm thick of size 900mmx780mmx222mm fixed to wall in repairs with brass screw complete all as specifed and directed . |
| 74 | Supply and fixing in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 75 | Supply and fixing in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed |
| 76 | Supply and fixing in repairspillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. |
| 77 | Supply and fixing in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe |
| 78 | Supply and fixing in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. . |
| 79 | Supply and fixing in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) |
| 80 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 81 | Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed. |
| 82 | Dismaintling of 75mm to 100mm bore cast iron pipe jointed in cement mortar and taking out of trenches or any description and any position as required complete all as specified and directed. |
| 83 | Supply and fixing of 100mm bore cast iron soil , waste and vent pipe, sand cast, in any length , with or without ears , with cement joints in cement sand mortar 1:1 with spun yarn fixed to wall complete all as specified and directed. |
| 84 | Fixing only of 100mm bore cast iron soil , waste and vent pipe, sand cast, in any length , with or without ears , with cement joints in cement sand mortar 1:1 with spun yarn fixed to wall complete all as specified and directed. |
| 85 | S& F cast iron soil, waste and vent pipe, sand cast 75mm bore in any length, with or without ears, with cement joints in CM 1:1 with spun yarn fixed to over septic tank or soakage well complete all as specified and directed. |
| 86 | Supply and fixing of 100 mm bore cast iron bend/TEE (any Radius) diminishing pieces or tapers(Large bore measured) complete all as specifed and directed. |
| 87 | Supply and fixing of 100 mm bore cast iron branch pipe , single (equal or unequal), ordinary or inverted (Spigot or Socket type )or with parallel branches complete alla specied and directed. |
| 88 | Supply and fixing of 75 mm bore cast iron bend (any Radius) diminishing pieces or tapers (Large bore measured) complete all as specifed and directed. |
| 89 | Supply and fixing of 75 mm bore cast iron cast iron cowls complete all as specifed and directed. |
| 90 | Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site. |
| 91 | Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame). |
| 92 | Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm eachcomplete all as all as specified and directed. |
| 93 | Material and labour Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant complete as specified & as directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 94 | Material and labour Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 60 x 105 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant complete as specified & as directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 95 | Supply and fixing mild steel angle iron work as in doors frames, chajja hollow square sections conforming to 410W(Gde E-250) quality-B including fixing of holdfast and hinges complete all as specified |
| 96 | Supply and fixingFactory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 97 | Supply and fixing 19 mm thick expanded closed cell rigid PVC sheet with a particularly fine and homogeneous cell structure and sikly matt surface. The nominal density of PVC board shold not be less than 500 kg/cum complete all as specified and directed bt engr - in - charge. |
| 98 | Supply and fixing factory made35 mm thick2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats |
| 99 | Supply and fixing stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed |
| 100 | Supply and fixing 200 mm long Aluminium anodised barrel tower bolts. |
| 101 | Supply and fixing 150 mm size aluminium anodised door handles. |
| 102 | Supply and fixing for sliding door bolt of 300mm long plateAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 103 | Supply and fixing 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed |
| 104 | Material and labour for preparation of new wooden surface of any descriptionexc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer. |
| 105 | Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 106 | Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete as directed. |
| 107 | Supply and fixing stainless steel butt hinges medium weight 100 mm long complete all as specified and directed |
| 108 | Supply and fixing 125 mm long Aluminium anodised barrel tower bolts complete all as specified and directed. |
| 109 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sas extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 110 | Supply and fixingaluminium powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members andhalf portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified. |
| 111 | Supply and fixing of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed. |
| 112 | Supply and fixingin repairrepair 25 mm dia drapery rod fancy powder coated fixed to wall with bracket& knobs complete. |
| 113 | Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 114 | Material and labour for preparation of old steel surface of any descriptionover 10cm width or girth and applying one coats of synthetic enamel paint |
| 115 | Supply and fixing pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified |
| 116 | Supply and fixing 100 mm size aluminium anodised door handles. |
| 117 | Material and labour 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed. |
| 118 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed |
| 119 | Supply and fixingRolled Mild steel confirming to Fe-290 (Gde E-165) roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165)complete all as specified and directed. |
| 120 | Supply and fixing Mirror cabinet PVC/fiber of size500x 400 with mirror complete all as specified and as directed. |
| 121 | Supply and fixing in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed15mm bore dia complete all as specified and directed |
| 122 | Supply and fixing of 75 mm bore cast iron branch pipe , single (equal or unequal), ordinary or inverted (Spigot or Socket type )or with parallel branches complete alla specied and directed. |
| 123 | Supply and fixing100 mmCast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) |
| 124 | Supply and fixing in replacement of PVC cabinet size 650x400mm, comprising of looking glass space for bath saop, shampoo, tooth brush and paste, handle towel rail complete all as specified |
| 125 | Material and labourfor providing and fixing stainless steel 9Grade 304) railing made of hollow tubes, channel, plates etc, including welding, grinding, buffing, polishing and makingcurvature ( where ever required0 and fitting the same with necessary stainless steel nuts and bolts etc of required sizeon the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed |
| 126 | Material and labour for 18-20mm thick granite stone slab as in shelves in cupboards including cutting , rubbing and polishing bothside and rounding of exposed edges complete all as specified and directed. |
| 127 | Material and labour for 18-20mm thick granite stone slab as in partition in cupboards including cutting , rubbing and polishing bothside and rounding of exposed edges complete all as specified and directed. |
| 128 | Material and labour for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 129 | Material and labour for providing andinjectingchemicalemulsion for postconstructional antitermitetreatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron |
| 130 | Material and labour for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 131 | Taking down carefully aluminium/copper point wiring ( light, fan, socket or power ) complete,including fixture and fittings such as switches, ceiling roses, pendents, regulators, socket, bell push, light fittings etc. removing serviceable material to store for keeping in safe custody for reuse at site or for taking credit ( credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surface of walls, floors etc. to match to the existing surfaces. |
| 132 | Material and labour for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 2 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core,PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dollyand including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator withsleek and curvy cover plates, for mounting ofmodularswitches, sockets, fan regulators complete for the following :- |
| 133 | One light/Ex fan/Ceiling fan/call bell point controlled by one switch. |
| 134 | One light point controlled by two, two way switches. |
| 135 | One socket outlet 6 amp controlled by one switch on the same board with other switches. |
| 136 | One socket outlet 6 amp controlled by one switch on indepdendent board. |
| 137 | Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red/Yellow/Blue, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken box with top plate/ frame of same manufacture for one 16 amp socket outlet Modular type for controlled by one switch on independent board complete. |
| 138 | Supply and fixing modular switch one way 6 amp 1 module all as approved. |
| 139 | Supply and fixing modular switch one way 16 amp 1 module all as approved. |
| 140 | Supply and fixing modular switch two way 6 amp 1 module allas approved. |
| 141 | Supply and fixing modular bell push, 6 amp, 1 module. |
| 142 | Supply and fixing bell multi music type, AC, 240 volts complete. |
| 143 | Supply and fixing modular socket6/16 - 2/3 pin combined 2 moduleall as approved. |
| 144 | Supply and fixing modular socket 6 amp 2/3 pin ,2 moduleall as approved. |
| 145 | Supply and fixing modular hum freeelectronic step fan regulator, 100 watt 2 module all as approved |
| 146 | Supply and fix in replacement ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified. |
| 147 | Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified. |
| 148 | Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete. |
| 149 | Material and labour for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green)drawing into andincluding concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete. |
| 150 | -ditto- all as per item no-145 but of size: 2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm (earth wire) |
| 151 | -ditto- all as per item no-145 but of size:4runs x 6 sqmm(Ph & N) + 1run x 6 sqmm (earth wire) |
| 152 | Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts with polycarbonate housing and diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 153 | Supply and fix in replacement of old unserviceable LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified. |
| 154 | Supply and fix in replacement Decorative wall light fitting, made out of polycarbonate suitable for B-22 base LED lamp including 9/10 watts LED lamp, full white of approved model fixed on wall and making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified. |
| 155 | Supply and fix in replacement ofLED bulkhead luminaire 10watt environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit with diffuser, including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified. |
| 156 | Supply and fix in replacement of LED street/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 42mm dia medium grade GI pipe of length 1.00m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washersand provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 157 | Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete. |
| 158 | Supply and fix in replacement of MCB distribution board, SPN, 12 way, 230 V, Single phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 159 | Supply and fix in replacement of MCB distribution board, ETPN, 4 way, 415 V, Three phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 160 | Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. |
| 161 | Supply and fix MCCB 160A, 36 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed. |
| 162 | Supply and fixing MCBs as per load requirement\"C\" series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- |
| 163 | Single pole 6 to 32 amp. |
| 164 | SPN 32 amp. |
| 165 | TPN 63 amp. |
| 166 | Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed. |
| 167 | Supply and fixing TV co-axial modular socket 1 module as approved. |
| 168 | Supply and fixing telephone socket double RJ-11, 1 module as approved. |
| 169 | Material and labour for co-axial TV cable drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories as required complete all as specified and directed. |
| 170 | Material and labour for PVC insulated unarmoured telephone cable for indoor applications 0.5 mm ATC 1 pairconfirming to TEC specification G/WIR06/02 drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories as required complete all as specified and directed. |
| 171 | TakingdownCeiling Fan of any make, typeandsweepby disconnecting Electric Connection anddeposit to MES store. |
| 172 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.Make: Atomberg Resena Smart Plus/ Orient Subaris Royal Premium Ceiling Fan/ Usha Fontana Mapple Ceiling Fan. |
| 173 | TakingdownExhaust Fan of any make, typeandsweepby disconnecting Electric Connection and depositing to MES store yard. |
| 174 | Supply and fixing of Exhaust Fan AC single phase 230Volt of size 300 mm sweep, 900 RPM turbo force energy efficient exhaust fan for kitchen (Metallic body finish) including making circular hole in wall of suitable size and grouting fastener with nut& washer-04 nos for installation of exhaust fan including providing the electrical connection with PVC insulated and PVC sheathed copper flexible cable of size 1.0 sqmm 3 core up to the ceiling rose complete all as specified and as directed. |
| 175 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter).The bove arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity (Size:270 x 40 200mm) complete all as specified and directed. |
| 176 | Supply, installation, Test and commisioning of Electric Chimney 900mm width & air flow capacity 1200Cum/Hr including making hole in wall for exhaust pipe and providing required length pipe of suitable dimension from chimney to outside of kitchen into atmosphere and smooth the wall surface complete all as specfied and directed with following features:- Touch sensor control with motion sensor- Brush-less DC motor, 9 speed control- Heat auto clean technology- Filter-less chimney - No need to clean filters- SS oil collector tray- Energy saving 2x1.5 W LED lights- Stir fry option for extracting fumes, Aeration forkeeping the kitchen fresh- Metal Housing-7 year warranty on motor Make: Glen Cat No: CH 6067 BL BLDC AC 900mm or equivalent in make of Hindware/ Faber/ Kaff. |
| 177 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed. |
| 178 | Excavating in trenches in average type ofsoil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed. |
| 179 | Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point. |
| 180 | Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each all as required and directed. |
| 181 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 182 | Taking down carefully Geyser any type any capacity from existing accn and depositing to MES store yard . |
| 183 | Supply and fixing of electric water heater ,storage type steel body with glass lined inner tank and heating element up to 2KW capacity 25 litre,BEE 5 star rated complete with all accessories such as safety valve,thermostate,NRV, connection pipe ect including all water connection and fixing on wall with suitable MS tower/anchor bolts,grouted to wall complete all as specified and as directed. |
| 184 | Taking up or down GI tubing 20 mm bore and connections and credit to contractor from site complete all as specified and directed. |
| 185 | Supply and fixing 20 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and directed. |
| 186 | Material and labour for drilling/boring and tapping on existing CI/GI pipe pipe 80mm to 300mm dia size for branch connections of 15mm to 50mm dia by fixing of MS clamp of size 50x40mm cut to length and bent to shape, drilled and welded with GI socket of suitable size including rubber packing, nut, bolt and washer etc. and testing complete all as specified and directed. |
| 187 | Supply and fixing Gun-metal, globe or gate valves of size 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
