|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise as dircetd and as specified. |
| 3 | Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed |
| 4 | Material and labour for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified. |
| 5 | Material and labour for non skid ceramic (colored),7 to 8 mm thick as in floor area of each tile exceeding 0.6 Sqm but n exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to matchincl and over screed bed or beeding layers of mortar 15mm thick in CM 1:4 in floors, complete all as specified and directed.complete all as specified and directed. |
| 6 | Material and labour for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in wall/dadoetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified |
| 7 | Material and labour for Non - skid Ceramic tiles light shade6 to 7 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick in CM 1:4 screed bed all as specified. |
| 8 | Material and labour for Non - skid Ceramic tiles light shade6 to 7 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified |
| 9 | Material and labour machine cut Kota stone slab 18-20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified. |
| 10 | Material and labour machine cut Kota stone slab 18-20 mm thick as in riser to step including 10 mm thick rendringin CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified. |
| 11 | Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as directed. |
| 12 | Material and labourMarble work any shed other than white or black 18-20mm thick (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like 15mm in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified. |
| 13 | Removing of existing unserviceable water proofing treatment with PCC padding, taking down cement plaster etc of any description and cleaning of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete. |
| 14 | Material and labour for water proofing treatment to non accessible RCC roofs by providing 10mm in CM 1:3 using 100% course sand on roof incl WPC 3% by weight of cement & applying one coat of bituminous primer @ 0.4 ltr/sqmand allow to dry applying one coat of hot blown bitumen grade 85/25@ 1.2 kg/Sqm,Supply and laying polymeric water proofing membrane weight not less than 3kg/sqmand and minimum 3mm thick reinforced with polyster non wove fabric(wt not less than 150gms/sqm) land onprimed surface by forced application andapplying a coat of alumunium paint, complete all as specified and directed. |
| 15 | Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed |
| 16 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs. |
| 17 | Supply and fixing500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) triple layer in white colourincl connecting up pipes securing access covers etc as specified and as directed(Make : Sintex or Polycon). |
| 18 | Material and labour for PCC (1:3:6) Type C-2 with using 40mm graded stone aggregates as in platform for PVC tank all complete as specified and as directed. |
| 19 | Supply and fixing 20 mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 20 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting not exc 10 cm girth complete all as specified and directed |
| 21 | Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 22 | Supplying and laying of20 mmbore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laid concealedin floor or wallincluding all fittingssuitable for fixing of plumbing fixture complete all as specified |
| 23 | Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 24 | Supply and fixing 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 25 | Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 26 | Material and labour for rendering on fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer\"s instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. |
| 27 | Supply and fixing Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size |
| 28 | Material and labour for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate in roof etc. as levelling coarse etc. all as specified and as directed by Engineer-in-Charge |
| 29 | Material and labour 10 mm thick rendering in cement mortar 1:6 onfair face of brick work or concrete surfacefinishing the surface fair and even complete all as specified and directed. |
| 30 | Material and labour newlyplastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall care putty 1.5mm thick to wall surface complete all as specified and directed. |
| 31 | Complete removal of existing treatment ofold plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall care putty 1.5mm thick to wall surface complete all as specified and directed. |
| 32 | Material and labour guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC /CICO/PIDILITE)@2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness30 mm all as per manufactureres instruction.(Upto 5 mtr height) including necessary chiping/taking down loose concrete along with application of rust remover for old rusted bars and rebar if required followed by application of anti corrosive paint (nitozink primer) @.25lt/sqm over old /rebar followed with application of one coat epoxy bonding agent(Nito Bond EP) to old concrete surface as per manufacturers instruction completeall as specified and directeddirected. |
| 33 | Supply and fixing mild steel welded fabric ofweight exe 2.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified. |
| 34 | Material and labour for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smoothwithout using extra cement. |
| 35 | Material and labour preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed. |
| 36 | Material and labour complete removal of existing treatment of ceiling and applying three coats of white washing complete all as specified and directed. |
| 37 | Demolition of brick work built in cement mortar of any description. |
| 38 | Material and labour for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 39 | Material and labour brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete. |
| 40 | Material and labourfor 15mm thick rendering on vertical side of sunken floor of brick/ concrete surfaces in CM (1:3) mixed with water proofing compound as per manufacture instrution and finished even and smooth without using extra cement complete all as specified. (Note : WPC shall be measured and paid seperately) |
| 41 | Material and labour for PCC 1:1½:3 nominal mix type A-0 using 12.5 mm graded stone aggregate mixed with water proofing compound as per manufacture instruction on bottom of sunken portion with slope towards spout including applying two coat of polymeric base chemical in the top surface of PCC and side of sunken portion complete all as specified. (Note : WPC shall be measured and paid seperately) |
| 42 | Material and labour for PCC 1:5:10 type E-2 (using 40 mm graded aggregate) as in lean concrete in sunken floors complete all as specified and directed. |
| 43 | Supply and fixing 50 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall for spout etc complete including taking down old pipe complete all as specified and as directed. |
| 44 | Supply and fixing in repairs vitreous china wash basin, white, flat back, size550x400m excluding taps, waste , chain & plug & porcelain stopperincluding brackets incl cutting for pinning in ends of bracketes or erecting standand fixing and supply and waste pipe complete all as specified and directed |
| 45 | Supply and fixing in repairs 600mm x 450 mm bevelled edge mirrorof selected quality, mounted on 6 mm thick AC plain building board or commercial plywood and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified and as directed. |
| 46 | Supply and fixing in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed. |
| 47 | Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding. |
| 48 | Supply and fixing in repair 15 mm bore stop cock / angle cock with flage complete all as specified and direcrted |
| 49 | Supply and fixing in repair CP brass 600 mm D type towel rail complete all as specified and directed. |
| 50 | Supply and fixing 0.60 mm thick stainless steel plate rack of size 31\"x36\"x10\" complete all as specified and directed. |
| 51 | Supply and fixing in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 52 | Supply and fixing in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed |
| 53 | Supplyand Fix in repairpillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. |
| 54 | Supply and fixing in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe |
| 55 | Supply and fixing in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. . |
| 56 | Supply and fixing in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) |
| 57 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 58 | Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed. |
| 59 | Dismaintling of 75mm to 100mm bore cast iron pipe jointed in cement mortar and taking out of trenches of any description and any position as required complete all as specified and directed. |
| 60 | Supply and fixing of 110 mm PVC (SWR) pipes doublesocketed inany length withrubber ring joints fixed in trenches or fixed towalls complete all as specified and directed. |
| 61 | S& F 75 mm PVC (SWR) pipes double socketed,inanylength with rubber ring joints, laid in trenches or in floors or wall complete all as specified and directed |
| 62 | Supply and fixing of 110 mm bore PVC (SWR)bends /tee any radiuscomplete all as specifed and directed. |
| 63 | Supply and fixing of 75 mm borePVC (SWR)bends/tee any radius complete all as specifed and directed. |
| 64 | Supply and fixing of 110mm bore PVC (SWR)cowls complete all as specifed and directed. |
| 65 | Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site. |
| 66 | Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame). |
| 67 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified |
| 68 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) etc complete all as specified and directed. |
| 69 | Supply and fixing factory made35 mm thick2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats |
| 70 | Supply and fixing stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed |
| 71 | Supply and fixing 200 mm long Aluminium anodised barrel tower bolts. |
| 72 | Supply and fixing 150 mm size aluminium anodised door handles. |
| 73 | Material and labour for sliding door bolt of 300mm long plateAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 74 | Supply and fixing 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed |
| 75 | Material and labour for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer. |
| 76 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 77 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete as directed. |
| 78 | Supply and fixing stainless steel butt hinges medium weight 100 mm long complete all as specified and directed |
| 79 | Supply and fixing Continuous (piano) hinges, 30mm width of flaps(when open) mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 80 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified anddirected by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified. |
| 81 | Supply and fixingaluminium anodisedventilator with fixed aluminium framefixed in vertical position with aluminium vertical members and1/3 portion to be provided with 6.30mm thick fixed figured glass and remaining 2/3 portion to be louvered using 4mm thick figured, including rubber gasket and aluminium beading as shown in TD Drwg No -CEJZ-/12 sheet No-2/2 complete all as specified. |
| 82 | Supply and fixing of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed. |
| 83 | Supply and fixingin repair25 mm dia drapery rod of MS chromium platedfixed to wall with fancybracket& knobs complete. |
| 84 | Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 85 | Material and labour for preparation of old steel surface of any descriptionover 10cm width or girth and applying one coats of synthetic enamel paint |
| 86 | Supply and fixing 100 mm size aluminium anodised door handles. |
| 87 | Material and labour 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed. |
| 88 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed |
| 89 | Supply and fixing powder coated anodised Aluminium aloy sectionswindows with frame side hung/openable shutters duly fitted with neoprene beading, cleats,glazing clips,hinges shutters glass panes 4.80 mm nominal thickness , aluminium alloy handles etc. as shown in TD Drwg No -CEJZ-/12 sheet No-1/2complete all as specified and directed. |
| 90 | Supply and fixing 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed |
| 91 | Supply and fixing of 75 mm PVC (SWR) branch piece, single (single Y) equal or unequalor with parallel branches complete alla specied and directed. |
| 92 | Supply and fixing110mm75 mm PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches complete alla specied and directed. |
| 93 | Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with white cement and pigment,jointed and pointed in neat cement slurry in floors on horizontal surfaces incl 15mm thick screed bed CM 1:6 Complete all as specified and directed. |
| 94 | Supply and fixing in repairs 18 mm (+ 0.7 mm) thick, solid PVC sheet one side prelam sheet for cupboard shutter of density 600 Kg/Cbm bent 900 and finish at all edges at level for making egdes at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at 4 edges using bonding tape etc complete all as per direction of Engineer-in-Charge and manufacturer specification |
| 95 | Supply and fixing MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete all as specified and as directed. |
| 96 | Material and labour 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 97 | Material and labour PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 98 | Material and labour for post construction anti termite treatment Along the external wall or at the junction of floor and wall using ATT chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc complete all as specified and directed. |
| 99 | Material and labour for post construction anti termite treatmentof soil under existing floors using ATT emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 100 | Material and labour for Treating the soil under plinth protection / floorat the rate of 5 litres of ATT chemical emulsion per square metre of surface area complete all as specified and directed. |
| 101 | Material and labour for Mild Steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips FE 410 Gde complete all as specified and directed by Engineer-in-Charge. |
| 102 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 103 | Complete removal of existing treatment andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 104 | Taking down copper/aluminium point wiring ( light,fan, socket or power) complete,incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting ( Mirror light,Bulk head,LED Panel 2\"\"x2\"\",security light,wall fitting,down light,Flood light,post top lantern)etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. |
| 105 | Material and labour for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:- |
| 106 | (a) One light point /Ceiling fan/Exhaust fan/call bell point controlled by one switch. |
| 107 | (b) One socket outlet 6 amp controlled by one switch on the indepdendent board. |
| 108 | (c) One socket outlet 6 amp controlled by one switch on same board. |
| 109 | One light point controlled by two , two way switches. |
| 110 | Ditto- all as per item No. 30 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 111 | Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete. |
| 112 | Material and labour for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length) |
| 113 | (a) 2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit.. |
| 114 | (b) 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit.. |
| 115 | Notes for item No. 104 to 108:-(i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster,putty and paint to match with the existing surface.(ii) If any beam/column/ rock wall is encountered while cutting chases,that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure.(iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion. |
| 116 | Supply and fix in replacement of modular switch 1 way 6A, 1 module 240V, 50 Hz complete all as approved. |
| 117 | Supply and fix in replacement of modular switch 1 way 16A, 1 module 240V, 50 Hz complete all as approved. |
| 118 | Supply and fix in replacement of modular switch 2 way 6A, 1 module 240V,50Hz complete all as approved. |
| 119 | Supply and fix in replacement of modular bell push 6A, 1 module , 240V, 50Hz complete all as approved. |
| 120 | Supply and fix in replacement of Electric call bell ding dong type, AC, 240V, 50Hz complete all as approved. |
| 121 | Supply and fix in replacement of modular socket, 6A- 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. |
| 122 | Supply and fix in replacement of modular socket, 6A/16A- 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. |
| 123 | Supply and fix in replacement Ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified. |
| 124 | Supply and fix in replacement of Modular BLDC fan regulator step type in 5 steps, 240V, 50Hz complete all as specifed and directed. |
| 125 | Supply and fix in replacement of old unserviceable LED tube light fitting Integral slim LED batten 20 watts with aluminium housing and polycarbonate diffuser internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. |
| 126 | Supply and fix in replacement of old unserviceable LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with PVC insulated and PVC sheathed twisted two core wire of suitable size complete all as specified. |
| 127 | Supply and fix in replacement Decorative wall light fitting, made out of polycarbonate suitable for B-22 base LED including 10 watts LED lamp, full white of approved model fixed on wall and making electrical connection with PVC insulated and PVC sheathed twisted two core wire of suitable size commplete all as specified. Make: Havell model No-CITY-2,LHDL04160099 or equivalent model in Wipro/ Crompton/ Philips. |
| 128 | Supply and fix in replacement of LED bulkhead luminaire in die-cast aluminium alloy body heat resistant prismatic diffuser, with specially designed gasket for minimum IP 55 degree of protection suitable for and including provision of 10W retrofit LED bulb, full white with B22 lamp holder including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified. |
| 129 | Taking down existing old ceiling/ exhaust fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades and deposited to AGE E/M store yard complete all as specified and directedrd. |
| 130 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make:Atomberg Resena smart Plus/ Orient Subaris Royal Premium Ceiling Fan/ Usha Fontana Mapple Ceiling Fan. |
| 131 | Supply and fixing of Exhaust Fan AC single phase 230 volt of size 300 mm sweep 900 RPM turbo force energy efficient exhaust fan for kitchen (Metalic body finish) including making circular hole in wall of suitable size and grounting fastener with nut & washer-04 Nos for installation of exhaust fan including providing the electrical connection with PVC insulated and PVC sheathed copper flexible cable of size 1.0 sqmm 3 core up to the ceiling rose complete all as specified and as directed. Make: Havells Cat No: FHEHDSPDB129 or equivalent in make of crompton/ Bajaj/ Khaitan. |
| 132 | Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed. Make: Havells Cat No: FHEHDSPDB129 or equivalent in make of crompton/ Bajaj/ Khaitan. |
| 133 | Supply and Fixing MS pipe medium grade 32mm dia fixing near the roof for hanging of ceiling fan complete all as specified and directed. |
| 134 | Supply and making the hook for hanging of ceiling fan with flat iron including nut bolts, 2 washers complete all as specified and directed. |
| 135 | Taking down carefully Geyser any type any capacity from existing accn and depositing to MES store yard. |
| 136 | Supply and fixing of electric water heater ,storage type steel body with glass lined inner tank and heating element up to 2KW capacity 25 litre,BEE 5 star rated complete with all accessories such as safety valve,thermostate,NRV, connection pipe ect including all water connection and fixing on wall with suitable MS tower/anchor bolts,grouted to wall complete all as specified and as directed.Make: Orient Aquator IoT/AO Smith Urbane/Crompton Amica Pro. |
| 137 | Supply and fix in replacement of LED street/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 42mm dia medium grade GI pipe of length 1.00m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washersand provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified.Make: Havells Cat No: LHETAVU7PA7J030 or equivalent in make of Bajaj/ Wipro/ Philips. |
| 138 | Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified.Make: Havells Cat No: DHDMCSN0251025 or equivalent in L&T/ Simens/ Legrand. |
| 139 | Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete. |
| 140 | Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. Make: Legrand Cat No: 507745 or equivalent in simens/Havells/L&T |
| 141 | All as per Item No. 133 here-in-before but SPN, 8 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately. |
| 142 | Supply and fix MCCB 160A, 36 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed. |
| 143 | Supply and fix in replacement of MCB 40A-63A, 10 KA, SPN \"C\" Curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. |
| 144 | Supply and fix in replacement of MCB 6-32A, 10 KA, SPN \"C\" Curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed. |
| 145 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter).The bove arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity (Size:270 x 40 200mm) complete all as specified and directed. |
| 146 | Supply, laying and testing of LT UG cable, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavu duty) 100 Volts grade with stranded aluminium conductor of size 35 Sqmm, 3.5 core complete all as specified and directed.Note: Earth work (Excavation,returning & refilling and removal),cable protection HDPE pipe, GI protection pipe shall be measured and paid for seperately under respective item of BOQ |
| 147 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 148 | Excavating in trenches in any type ofsoil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed. |
| 149 | Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each all as required and directed. |
| 150 | Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point. |
| 151 | Taking up GI tubing 20 mm bore and connection from site as directed. |
| 152 | Supply and laying of 20 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 153 | Material and labourfor drilling/boring and tapping on existing CI/GI pipe pipe 80mm to 300mm dia size for branch connections of 15mm to 50mm dia by fixing of MS clamp of size 50x40mm cut to length and bent to shape, drilled and welded with GI socket of suitable size including rubber packing, nut, bolt and washer etc. and testing complete all as specified and directed. |
| 154 | Supply and fixing Gun-metal, globe or gate valves of size 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 155 | Supply and fix Bib taps (bore dia of 20 mm), cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
