|
| 1 | M&L for Preparing of old decorative surface of wall and applying one coat of Oil Bound distemper complete all as specified and directed. Note:- Applied By Roller only. |
| 2 | M&L for Preparing of old decorative surface of ceiling and applying one coat of Oil Bound distemper complete all as specified and directed. Note:- Applied By Roller only. |
| 3 | M&L for Preparing of old decorative surface of wall and applying two coat of Oil Bound distemper complete all as specified and directed. Note:- Applied By Roller only. |
| 4 | M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over coat of primer and 1mm thick wall care putty complete all asspecified and directed. Note:- Applied By Roller only. |
| 5 | M&L for complete removal of existing treatment of wall and applying two coats of Royal emulsion over coat of primer and 1mm thick wall care putty complete all asspecified and directed. Note:- Applied By Roller only. |
| 6 | M&L for complete removal of existing treatment of wall and applying two coats of Royal emulsioncomplete all asspecified and directed. Note:- Applied By Roller only. |
| 7 | M&L for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat of primer complete all asspecified and directed.Note:- It includes cost of vegitation, plants etc remove if any on the wall surfaces. |
| 8 | M&L for one coat of synthetic enamel paint on old painted wooden surface including preparation of surfaces complete all asspecified and directed. |
| 9 | M&L for two coat of synthetic enamel paint on old painted wooden surface including preparation of surfaces complete all asspecified and directed. |
| 10 | M&L for complete removal of existing treatment of wooden surface and applying two coats of wooden polishing over a coat of wood filler (primer) complete all as specified and directed. |
| 11 | M&L for preparation old steel and iron surface not otherwise described over 10cm width or girthand applying one coats of synthetic enamel paint complete all asspecified and directed. |
| 12 | M&L for preparation old steel and iron surface not otherwise described over 10cm width or girthand applying two coats of synthetic enamel paintcomplete all asspecified and directed. |
| 13 | M&L for preparation of old plastered or unplastered surface of any desciription exc 10 cm width or girth and applying one coat of weather shield paint (Apex)complete all as specidied and directed. Note:- It includes cost of vegitation, plants etc remove if any on the wall surfaces. |
| 14 | M&L for complete removal of existing treatment of wall and applying two coats of weather shield paint (Apex) over a coat of primer complete all as specified and directed. Note:-It includes cost of vegitation, plants etc remove if any on the wall surfaces. |
| 15 | Material and labour for dampness rectification on affected wall area with following specification/ procedure complete all as specified and directed :-(a) Surface preapation : Removing existing putty/ plaster/ POP from the affected wall surface with wire brush/ grinder/ hammer etc up to brick level.(b) Surface coating: Applying two coats of anti-fungal, acrylic waterproofing coating ofDr Fixit Pidifin 2k , Asiain , Berger or equivqalent in CICO/ STP over cleaned surface and allowing it to dry for 24 hours . (c) Finishing the surface:Applying plaster and putty over the treated surfacemixed with waterproofing compound to provide proper finish after that painting can be done after proper curing. |
| 16 | Material and labour for preparation of old concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paintwith primer complete all as specified and directed. |
| 17 | Supplying and applying Asian Paints SmartCare BarrierX 2K is a hybrid epoxy modifed two component coating over complete removal of putty / existing suraface for negative side waterproofing application with passes more than 10Bar Negative water pressure as per ASTM D 7088 , Solid Content is more than 90% ASTM D 1644and pull of adhesion of 4 Mpa ASTM D 7234. This product offers superior mechanical properties and is designed to be applied on walls, ceilings & basements where the substrate has moisture or is in damp condition complete all asspecified and directed. |
| 18 | Material and labour for dampness rectification on affected wall area with following specification/ procedure complete all as specified and directed :-(a) Surface preapation : Preparation of old treated surfaces of affected wallwith wire brush/grinder/hammer etc(b) Surface coating: Applying two coats of anti-fungal, acrylic waterproofing coating ofDr Fixit Pidifin 2k, Asian, Berger or equivqalent in CICO/ STP over cleaned surface and allowing it to dry for 24 hours . (c) Finishing the surface:Applyingputty over the treated surfacewith waterproofing compound mixed with puttyto provide proper finish after that painting can be done. |
| 19 | S & F Retro Reflective Sign board type IV HIP,3mm thick arclyic /ACP sheet of any shape / size including fixing to the wall surfaces complete all as specified and as directed.Colour will be approved by GE.Note:- Rate of Reflactive letter or figures (roman, Italic or Indian) of any colourincluding in this items. |
| 20 | Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc. |
| 21 | M&L Rendering 10 mm thick internal usingcement plaster in CM 1:6 onfair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement complete all as specified and directed.. |
| 22 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even all as specified and directed. |
| 23 | M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM ( 1:3 ) finished even and smooth (without using extra lime or cement) on Ceilingcomplete all as specified and as directed. |
| 24 | M&L for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of wall care putty , white primer complete on walls complete all as specified and as directed. |
| 25 | M&L for two coats of weather shield paint (Apex) over a coat of primer on new plastered surfaces including preparation of surfaces complete all as specified and as directed. |
| 26 | Material and labour for applying two coats of oil bound distemper on ceiling overacoatpriming paint including preparation of new surfaces complete all as specified. |
| 27 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 28 | S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12mm fixed with tinned tacks of wire staplesfor repair of cracks at various location in wall, beam, chajjas, facia , slab , lintel etc including taking down plaster of craked portion and making good the area by rendering 15mm thick in CM 1:4 complete all as specified and directed. |
| 29 | M&L for one coat of Floor Coating paint on floor surface including preparation of surfaces complete all asspecified and directed. |
| 30 | M&L for two coat of Floor Coating paint on floor surface including preparation of surfaces complete all asspecified and directed. |
| 31 | S&F in repairs Wall mixer with provision for Overhead Showerwith 115mm Long bend pipe on Upper Side, connecting Legs & wall Flanges. |
| 32 | Demolition of cement concrete in ground floor & pavings n.exc 15cm thk (below or above ground level) complete all as specified and directed. |
| 33 | M&L 60 mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS 15658-2006, M-40 Grade with grey cement and pigment including 30mm to 50mm thick crushed sand filling complete all asspecified and as directed. |
| 34 | M&L for chequred cement concrete tiles colour glessyfinishedrubber pressed 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed. |
| 35 | M&L for Hardcore of gauge n exc. 63 mm Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed . |
| 36 | M&L Plain Cement concrete in Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40mm graded aggregate) all as specified and directed. |
| 37 | M & L cement concrete tybe B- 2, 1:2:4 (40mm graded aggregate) in floor finish concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed. |
| 39 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"B\" complite all as specified and as directed. |
| 40 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge as specified and as directed. |
| 41 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6complete all as specified and as directed. |
| 42 | M&L Brickwork with flyashbricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:6) complete all as speecified and directed |
| 43 | Removing building materials etc.to a distance of exc 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 44 | DismantlingStone slabs and tiles of any description or thickness in floors, aprons etc.of laid dry and laid dry and pointed ,removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 45 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 |
| 46 | M&L for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as directed |
| 47 | Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 48 | Supply and fix 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone sizenot exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed |
| 49 | M & L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed. |
| 50 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs. 7450.00] |
