|
| 1 | SCHEDULE \"A\" (B/R) |
| 2 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified and directed. |
| 3 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingand Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with cement mortar 1:6 complete all as specified and directed. |
| 5 | S&F powder coated anodised aluminium alloy sections 3 tier track sliding windows series B weight of section frame 1.248 kg/mand shutter section weight 0.547 kg/m Jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness,aluminiumwire cloth 0.45 mm dia and average width of aperture 1.4 mm, aluminium alloy handles ,aluminium powder coated any colour deco grill 8 mm dia(75x75mm) etc including taking down old window in any size and make and make good jambs and cillscomplete all as specified and directed.Note :-Quoted rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle, 8mm dia aluminium powder coated colour deco grilletc |
| 6 | Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 7 | M&L for 15 mm thick renderingtwo layers consisting 10 mm thick in CM 1:6 followed by 5 mm thick in CM 1:4 mixed with WPC on fair faces ofbrick work or concrete surface including finished even and fair all as specified. Note: WPC shall be measured and paid separately as supply only. |
| 8 | M&L for 10 mm thick renderingon internalwall surfaces in cement mortar 1:6on fair faces incl finished even and smooth w/o using extra cement complete all as specified and directed. |
| 9 | Supply only Integral waterproofing compoundcomplete all as specified and directed. |
| 10 | M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:3, finished even and smooth (without using extra lime or cement) on ceiling complete all as specified and directed. |
| 11 | M &L for applying 2 coats of distemper oil emulsion paint over a coat of primer and putty on wall including preparation of surfaceby using mechanical tool/ auto rollercomplete all as specified and directed.Note:- All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved by GE before carrying out the work. |
| 12 | M &L for Finishing walls with Acrylic Smooth exterior paint of required shade on plastered surface with two or more coats applied @ 1.67 ltr/10 sqm over including priming coat of exterior primer applied @ 2.20 kg/10 sqm and puttyby using mechanical tool/auto roller complete all as specified and directed.Note:-All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved by GE before carrying out the work. |
| 13 | M&L for preparingplastered surfaces and applying threecoats of white wash on ceiling complete all as specified and directed. |
| 14 | M&L for CompleteRemoval of existing treatment on wall by vacuum based sanding machine, removal of nails etc & fillng cracks and applyingAcrylic Smooth exterior paint of required shade with two or more coats applied @ 1.67 ltr/10 sqm overincluding priming coat of exterior primer applied @ 2.20 kg/10 sqm and putty by using mechanical tool/auto roller complete all as specified and directed.Note:-(i) Chajja, beam, column to be painted different colour as per Engineer-In-Charge instructions.(ii) All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved by GE before carrying out the work. |
| 15 | M&L for CompleteRemoval of existing treatment on ceiling and applying two coats of white wash including preparation of surface complete all as specified and directed. |
| 16 | M&L for CompleteRemoval of existing treatment on wall by vacuum based sanding machine removal of nails etc & filling cracks and applying two coats of oil bound distemper over one coat of alkali resistant primer andputty by usingmechanical tool/ auto roller complete all as specified and directed. Note:- All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved by GE before carrying out the work. |
| 17 | Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 18 | Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 19 | S&F 25mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixedto walls, ceilings or in floors etc., with all fittings complete all as specified and as directed. |
| 20 | S&F 20mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed to walls, ceilings or in floors etc., with all fittings complete all as specified and as directed. |
| 21 | Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). |
| 22 | S&F 110mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 23 | S&F 75mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 24 | S&F 110mm PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 25 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frames) complete all as specified and directed. |
| 26 | S&F 165x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 27 | S&F 35mm thick second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 28 | S&F second class hard wood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 29 | S&F in repairStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 30 | M&L for painting to surfaces of any description, not otherwise descri-bed, over 10cm width, preparation of new wooden surface and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 31 | M&L for painting to surfaces of any description, not otherwise descri-bed, over 10cm width, preparation of old wooden surface and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 32 | M&L for painting tosurfaces of any description, over 10cm in width or girth,not otherwise described inclduing preparation of old steel surfaces and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 33 | S&F 100mm longButt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 34 | S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 35 | S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 36 | S & F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 37 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc., complete all as specified and as directed. |
| 38 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6 complete all as specified and directed. |
| 39 | M&L for Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering with cement mortar 1:4 complete all as specified and as directed. |
| 40 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes,including necesaary repair for existing tanksetc exc 1000 and n exc 2000 ltr complete all as specified and directed |
| 41 | S&F in repairs 19mm dia curtain rods, anodised aluminium alloyincluding brackets, stops rollers etc., complete all as specified anddirected. |
| 42 | S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including bracket and cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste complete all as specified anddirected. |
| 43 | S&F in repair 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cementcomplete all as specified and directed. |
| 44 | S&F in repairs 15mm bore Bib tap fancy type of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) complete all as specified anddirected. |
| 45 | S&F in repairs 15mm borePillar taps of fancy type ofPTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and directed. |
| 46 | S&F in repairs 15mm bore angle stopcock of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 47 | S & F in repairs PVC connection 15 mm size PTMT nuts length 450mm complete all as specified and directed. |
| 48 | S & F in repairs32mm dia bore PVC waste pipe for wash basin complete all as specified and directed. |
| 49 | S&F in repair of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified anddirected. |
| 50 | Demolition of cement concrete un- reinforced in ground floor & and paving not exceeding 15cm thick, complete all as specified and directed. |
| 51 | M & L for PCC 1:3:6 type C2 75 mm thick (using 40 mm graded aggregate) , as in plinth protection and sub base for paving tiles finishing the surfaces even & fair complete all as specified and directed. |
| 52 | M&L for 100mm thick Cement concrete type D- 2,1:4:8 (using 40mm graded aggregate) complete all as specified and directed. |
| 53 | M&L forsand cushioning/filling under paver block all as specified and directed. |
| 54 | S&F Machine pressed precast Concrete interlocking paver block any shape and size with grey/colour cement and pigment confirming to IS 15658-2006 of60 mm thickness, M-35 grade all as specified and directed. |
| 55 | Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed. |
| 56 | M & L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 57 | M&L for PCC(1:3:6) type C2(using 40 mm graded stone aggregate) as in surface channels and draincomplete all as specified and directed. |
| 58 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed. |
| 59 | Dismantling plain or corrugated steel sheeting any gaugeincluding Nainital or similar pattern in roof covering all as specified anddirected. |
| 60 | S & F Pre- painted galvalume aluminIum zinc coating GI based corrugated steel sheet 0.50mm thick of anY colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 61 | S&F300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed. |
| 62 | S&F150 mm size (Overall length of cover plate) floor door stopper of aluminiumbody and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 63 | Removal of all loose/unsound/bad/damaged concrete or plaster from existing RCC structure of slab/beams/walls byusing chisel/hammer, cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement. clean loose rust from bars manually with brush .fixing new supplementary bars if required,either by tying it with existing bars or by welding on it. Applyingepoxy bonding agent and making good with polymer modified plaster/micro concrete of required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor including formworkcomplete all as specified and directed. |
| 64 | SCHEDULE \"A\" (E/M) |
| 65 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified anddirected. |
| 66 | Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existingconcealedconduitthrough Wall/Ceiling/Floor along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dollycomplete for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified anddirected. |
| 67 | One light/fan point controlled by one switch with cable 1.5 Sqmm size. |
| 68 | one 3 pin socket outlet 5 Amps, on same boardwith cable 1.5 Sqmm size. |
| 69 | one 3 pin socket outlet 5 Amps, on independentboardwith cable 1.5 Sqmm size. |
| 70 | All as per item No 66.00 here-in -before but for one 5 pin socket outlet 5/15 Amps, on independentboardwith cables 2.5 Sqmm size. |
| 71 | Material and labour for point wiring of one light/ceiling fan/exhaust fan point controlled by one switch with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copperconductor wire drawn into and including PVC conduit and its acessories (concealed wiring) including provision of 1.5Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire. Note:-(i) Quoted rate deemed to include Rigid non metalic PVC conduit 20mm and suitable size junction box (ii) Quoted rate deemed to include cutting chases on brick walls/ concrete surfaces not exc10cm girth and making good in cement mortar (1:3) the existing surfaceafter carrying out the concealed wiring including necessary finishes to match with existing finishi all as specified and directed. |
| 72 | One light/fan point controlled by one switch. |
| 73 | one 3 pin socket outlet 5 Amps, on Independent boardwith cables 1.5 Sqmm size. |
| 74 | All as per item No 67 here-in-before but for one 3 pin socket outlet 15 Amps,onindependentboardwith cables 2.5 Sqmm size. |
| 75 | Supply and fix Modular switch one way 5/6 A white Active one module all as specified and as directed. |
| 76 | Supply and fix Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed. |
| 77 | Supply and fix Modular switch one way 16 A white Active one module all as specified and as directed. |
| 78 | Supply and fix Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed |
| 79 | S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated bodycomplete all as specified and as directed. |
| 80 | Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matching with existing colour of wall, floors, etc. all as specified and as directed. |
| 81 | Supply and fixing GImetal flush box suitable for mounting modular plate as per requirement of following modules:- |
| 82 | GImetal flush box, 2 Module |
| 83 | GImetal flush box, 3 Module |
| 84 | GImetal flush box, 4 Module |
| 85 | GImetal flush box, 6 Module |
| 86 | GImetal flush box, 8 Module |
| 87 | GImetal flush box, 12 Module |
| 88 | GImetal flush box, 16 Module |
| 89 | Supply and fixingcombined both frame and cover plates, fixing on mounting boxes for following modules:- |
| 90 | Cover plate with frame,1 Module |
| 91 | Cover plate with frame,2 Module |
| 92 | Cover plate with frame,3 Module |
| 93 | Cover plate with frame,4 Module |
| 94 | Cover plate with frame,6 Module |
| 95 | Cover plate with frame,8 Module |
| 96 | Cover plate with frame,12 Module |
| 97 | Cover plate with frame,16 Module |
| 98 | M&L for cutting chases on brick walls/concrete surfaces not exc10cm girth and making good in cement mortar (1:3) the existing surfaceafter carrying out the concealed wiring including necessary finishesall as directed. |
| 99 | Supply and fix high efficiency wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. |
| 100 | Supply and fix high performance low wattage Street light not less than 25 Watts LED light fitting ,IP66 protection powder coated pressure die cast aluminium high power street light with heat resisant toughened glass with lens by providingGI pipe medium grade 25 mm dia 1.5 Mtrin length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coats of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting including taking down old u/s damaged fittingall as specified and directed. |
| 101 | Taking down ceiling fans/Exhaust fans of any make and sweep from ceiling hook/existing position complete including disconnectingand transporting to E/M store all as specified and as directed. |
| 102 | Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 103 | Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300mmsweep with, blades,frame and louvers complete all as specified and as directed. |
| 104 | Supply and replacement ofMetal clad socket single pole and neutral enclosure with a two pin + earth plug top and socket incl taking down old u/s metal clad complete with one double pole 20-32 Amps MCB C Type 230 Volts all as directed. |
| 105 | Taking down sub main wiring along with earth wire of any sizescomplete all as specified and as directed. |
| 106 | Material and labour for Sub main wiring with Two runs ofsingle core 4 sqmm for phase and neutral and one run single core 4 sqmm as earth wire with multi stranded copper conductorPVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into concealed conduit or non-metallic rigid PVC conduit of minimum 20 mm dia as per site requirement wiring through wall/cable tray/ceiling/floor/roof etc including conduit accessoriescomplete all as specified and as directed. Notes:-(i) The disturbed surfaces shall be made goodto match with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles .(iv) Three runs of 4.00 Sqmm cable, and one run of PVC conduit will be measured as one unit. |
| 107 | All as per item ser No 84here in before but Two runs single core 6 sqmm for phase and neutral and one run single core 6 sqmm as earth wire (ie 3X6 Sq mm)complete all as specified and as directed. |
| 108 | All as per item ser No 84here in before but two runs single core 10 sqmm for phase and neutral and one run single core 10 sqmm as earth wire (ie 3X10 Sq mm)complete all as specified and as directed. |
| 109 | All as per item ser No 84 here in before but Four runs single core 10 sqmm for three phases and neutral and two runs single core 10 sqmm as earth wire (ie 6X10 Sq mm)complete all as specified and as directed. |
| 110 | Supply and fix in repair MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curveincluding taking down old unserviceable MCB complete all as specified and as directed |
| 111 | Supply and fix in repair MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curveincluding taking down old unserviceable MCB complete all as specified and as directed |
| 112 | Supply and fix in repair r MCB TPN 415 V,40-100 Amps with breaking capacity 10KA C curve including taking down old unserviceable MCB complete all as specified and as directed |
| 113 | S&F DB for MCB SPN 4 waydouble door DB with 200 amps rated copper bus barin SS enclosure having IP 43 and IK 09 protection including taking down old u/s DB and MCB\"s all as specified and directed . Note :- MCB SPN/SP shall be measured and paid under the respective item of the schedule. |
| 114 | S&F DB for MCB SPN 8 waydouble door DB with 200 amps rated copper bus barin SS enclosurehaving IP 43 and IK 09 protection including taking down old u/s DB and MCB\"s all as specified and directed . Note :- MCB SPN/SP shall be measured and paid under the respective item of the schedule. |
| 115 | S&F DB for MCB SPN 12 waydouble door DB with 200 amps rated copper bus barin SS enclosure having IP 43 and IK 09 protection including taking down old u/s DB and MCB\"s all as specified and directed . Note :- MCB SPN/SP shall be measured and paid under the respective item of the schedule. |
| 116 | S&F sheet metal enclosure TPN MCB DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangementsIncluding taking down old u/s DB, MCB\"s all as specified and directed.Note :-(i) MCBs shall be measured and paid separately under the respective item of schedule. |
| 117 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp incl taking down old unservicable and connecting up with three core flexible copper conductor cable of suitable size complete. |
| 118 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC cool white (or) warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling incl taking down old unservicable fitting and connecting up with driver three core flexible copper conductor cable of suitable sizecomplete all as specified and as directed. |
| 119 | Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate 5 layersof charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in eletrcial plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:-(i) Quoted rate deemed to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc. (ii) Quoted rate deemed to incl taking down old unservicable earthing items. |
| 120 | M&L for GI Pipe 15mm light grade galvanised with all fittings laid in trenches all as specified and directed. |
| 121 | Schedule of credit amount brought back from Ser Page No.45- Rs. 1,18,815.00 will be deducted from the above quoted amount to derive the contract sum.SIGNATURE OF CONTRACTOR |
