|
| 1 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etcincluding errection of double steel scaffolding, covering with green cloth and all the safety measures/ precautions and remove the debries outside MD land (as per directions of BMC) complete all as specified and as directed. |
| 2 | M&L for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 3 | M&L for Rendering 10mm thick on fair faces of ceilings in CM 1:3 finished even & smooth without using extra cement, complete all as specified. |
| 4 | Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat primer on 1 to 2 mm thick wall care putty complete all as specified and directed. |
| 5 | Material and labour for preparation of new plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer on 1-2mm thick wall care putty, complete all as specified and directed. |
| 6 | M&Lfor preparation of old plastered surface of wall and applying 2 coats of oil emuslion distemper complete all as specified and directed. |
| 7 | Material and labour for preparation of old plastered surface of ceiling and applying two coats of oil bound distemper, complete all as specified and directed. |
| 8 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, conforming to Fe.290 Gde-E-165. |
| 9 | S&F in repair 75mm cast iron floor trapwith grating including jointingto waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed. |
| 10 | M&L coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) areaof each tiles exceeding 0.11 Sqmbut not exceeding 0.18 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over 10mm thick rendering in CM (1:4),completeall as specified and directed. |
| 11 | M&L for coloured glazed ceramic tiles as in vertical surface, of size exc 0.06 Sqm and not exc 0.16 Sqm 7-8mm thickas indado/skirting or on vertical surface, over and including 10mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement match to existing tiles completeall as specified and directed. |
| 12 | M&L for coloured light shade Digitial Glazed vitrified tiles of size 600 x 600 mm, 7 to 8mm thick, laid in flooring, with & including 5mm thick adhesive of of approved make including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed by Engr-in-charge. |
| 13 | M&L for coloured light shade Digitial Glazed vitrified tiles7 to 8mm thick, superior quality, 100mm highskirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, complete all as specified and as directed.(Note : Skirting shall be flush with the walls) |
| 14 | Dismantling stone slabs and tiles of any description or thickness in floors laid or on riser and treads bedded and pointed in any mortar complete all as specified and directed. |
| 15 | M&L for Machine cut cuddapa stone slabs 20-25mm thick fixed with cement mortar 1:3 screed base laid and jointed with grey cement slurry as in verticle/ horizontal supports for cooking platform, complete all as specified and as directed by Engr-in-Charge. |
| 16 | M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite incl moulding and rounding all as directed. |
| 17 | Taking down of chowkhats or frames without taking off shutters from the frame exc 1.5 Sqm but n.exc 4.00 Sqm Each, complete all as specified. |
| 18 | Taking down of chowkhats or frames without taking off shutters from the frame n.exc 1.5 Sqm, complete all as specified. |
| 19 | Taking down shutters exe 1Sqm and n exe 2 Sqm Each. |
| 20 | M&L for 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 21 | M&L for 35mm thick factory made plain framed, panelled shutters (two panel), 2nd class HW rail and style, with lock rail and panel of 9 mm B.W.P commercial ply with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc all as specified and directed by Engr in charge. |
| 22 | M&L35mm thick 2nd Class Hard Wood as glazed and skelton shutters open rebated and prepared to receive glass, gauze etc, edges of forming plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters with sash bars all as specified in SSR Pt-I |
| 23 | Dismantling boarding any description fixedin any position with screws. |
| 24 | M&L for 12mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thick decorative choice laminate type 1 of surface finish, colour and pattern as approved , fixed with approved adhesive as per manufacturer\"s instruction, fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc cupboard shutters complete as directed by Engineer In Charge. |
| 25 | M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and diretced. |
| 26 | S&F 100mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed. |
| 27 | S&F 150mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed. |
| 28 | S&F continious piano hinges of 30mm flap staniless steel, bright finish fixed with mild steel screws complete all as specified and directed. |
| 29 | S&F plastic body Magnetic catcher with iron plate to be fixed with shutters of kitchen cabinetapproved pattern and shape fixed with screws on wooden/ plywood surfaces all as specified and directed. |
| 30 | S&F powder coated (25 Micron minimum thickness) aluminum frame for door, windows,ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, sliding rollers, Rubber gasket etc compleate all as specified and directed.Note: (a) Glazing shall be measured seperately. (b) Item shall be paid as per weight of alluminium section. (c) The rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc, as required which shall not be measured for arriving the weight. (d)the rate shall be inclusive of the locking arangement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area. |
| 31 | Supply and fix4.80 mm thick plain glass n exc 0.5 Sqm in each pane fixedto aluminium windows and iron frame. |
| 32 | Supply and fix4.80mm thick plain glassexc 0.5 Sqm in each pane fixedto aluminium windows and iron frame. |
| 33 | S&F 100mm long stainless steel butt hinges medium weight with ISI mark. |
| 34 | S&F 100mm long butt hinges medium weight stainless steel with ISI mark. |
| 35 | S&F night latch seven levers suitable for 35mm to 45mm thick doors. |
| 36 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and as directed by Engg-in-Charge |
| 37 | S&F Aluminum anodized barrel tower bolt of extruded section 200mm long |
| 38 | S&F in repair Aluminum anodized barrel bolt of extruded section 200mm long. |
| 39 | S&F extruded aluminium alloy handle fabricated type anodized 150mm long. |
| 40 | S&F peep hole, Magic eye brass at entrance door shutter complete all as specified and as directed by Engineer in Charge. |
| 41 | S&F Door stopper wall mounted magnetic latch type arrrangement of approved make and pattern, approved pattern, fixed with screws on skirting and plate with spring arrangementfixed on door complete all as specified and as directed by Engineer in Charge |
| 42 | S&F as in repairs Door stopper wall mounted magnetic latch type arrrangement of make and pattern, approved by GE, fixed with screws on skirting and plate with spring arrangementfixed on door complete all as specified and as directed by Engineer in Charge |
| 43 | S&F Aluminium Wire Cloth 0.45mm niminal dia with 1.40mm average width of aperture, fixed with aluminium wire staples, complete all as specified and as directed :- |
| 44 | M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in bed blocks, copings, benchings, railing, bends, fixing of hold fast etc incl necessary form work all as directed/specified. |
| 45 | S&F 20mm dia stainless steel curtain rod or similar articlescomplete all as specified and directed by Engineer in Charge |
| 46 | S&F alumunium powder coated brackets suitable for hanging 20mm dia rods in Wardrobes and fixed on stone/ walls with screws, all as specified and directed. |
| 47 | S&F aluminium grill including suitable aluminiumanodised frame F/H section as requird manufactured by Approved make, 7.5 mm thick all as specified and as directed by Engr- in- charge. |
| 48 | M&L preparation of new wooden surface and applying two coats of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described, over a coat of pink primer, specified and directed. |
| 49 | M&L preparation of new Steel surface and applying two coats of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described, over a coat of Red oxide, zinc chrome, specified and directed. |
| 50 | M&L preparation of old wooden surface and applying one coat of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described. |
| 51 | M&L preparation of old Steel surface and applying two coats of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described, specified and directed. |
| 52 | S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC white seat cover withmild steel chromium plated or aluminised hinging device including flushing cistern connection to drowm pipe PVC connection andflushingpipe all as specified. |
| 53 | S&F as in repairs Vitreous China wash basin, white, flat back, size 550 x 400mm including brackets or fixing with bolts in wall , 15mm fancy pillar tap, waste coupling, waste pipe, complete all as specified. |
| 54 | M&LVitreous water closet (Squatting pan, Orissa pattern, size 580 x 440 white, with integral foot rests and \"P\" trap (excludinGround Floorlushing cistern and flush pipe) including provision of lime concrete bedding complete fixed in repairs. |
| 55 | S&F 10 ltr capaciaty PVC low level flushing cistern 10 litre capacity with 32mm bore polythene flush pipe of sufficient lenght including internal fitting (valve less syphonic)etc. complete fixed as in repairs. |
| 56 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 57 | S&F PVC cabinet with openable shutter and mirror with size of 450mm x 350mm with thickness of mirror not less than 2mm, fixed to wall complete all as directed. |
| 58 | S&F aluminium anodised tubular towel rail 20mm dia 600mm long including necessary aluminium brackets complete all as specified and as directed. |
| 59 | S&F as in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 60 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 61 | S&F low density polythy lene (LDPE) pipes 40mm dia of pressure rating 6 Kg /CM2 laid in walls/floors from WHB out let upto Nahani trap including required nos of elbows/ fittings, and cutting chasing in, etc complete. |
| 62 | S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick (SS grade 304 AISI 18/8) IS embosed (IS : 13983) gloosy finish ktichen sink with plugs, washeres and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and as directed by Engineer in Charge. |
| 63 | S&F 38mm dia PVC (flexible) waste pipe, 800mm for Kitchen sink complete all as specified and directed. |
| 64 | Demolition of brick work built in cement mortar or cement lime mortar an removal of debris out side MD land. |
| 65 | M&L for brick work built in cement mortar 1:6 with sub class B bricks straight or curved on plan exc 6m mean radius. |
| 66 | M&L brick work sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 etc all as specified and directed by engineer- in-charge. |
| 67 | S&F in repairs stainless steel plate rack made of size 900X580X210 mm fixed to wall with screws all as specified and directed. |
| 68 | S&F toilet paper holder fixed in repairs complete all as specified and directed. |
| 69 | S&F Stain less steel Towel ring 150mm dia of approved make complete all as specified and directed. |
| 70 | S&F decorative corner glass shelf shall be size of 300 X 120 mm and 8mm thick with railing 25mm high having edges rounded off and shall be supported on chromium plated brass brackets fixed with chromium plated brass screw on plugs or gutties fixed in wall. |
| 71 | M&L for 18mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thk decorative choice laminate type 1 of surface finish, colour and pattern as approved i, fixed with approved adhesive as per manufacturer\"s instruction,fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etcas in kitchen cupboard/ wardrobe shutters complete as directed by engineer In Charge. |
| 72 | S&F Telescopic channels, powder coated with ball bearings, suitable for Sliding stainless steel kitchen basket 60cm long standard width; fixed over 2nd class hard wood rectangular fillet sectionalarea exc 3 & n exc 6 Sqcm, clean swan secured with screws and the fillet fixed on cuddapah stone with screws, all as specified and as directed. |
| 73 | Solid PVC door frame of size 100 x 45mm made out of 5mm wood grain printed PVC sheet reinforced with MS square/rectangular tubefixing in existingopening including& edges will be painted to match with prelam sheet necessary hold fast and concreteall asspecified and directed. |
| 74 | M&L for factory made moulded door shutter 35mm thick, consisting of solid core single leaf flush door of 30mm thick, lipped with 15mm (5mm x3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick PVC sheet of density 600 Kg/Cum Manufactured by an ISO 9001-2015 certified company . Termite proof, water proof and fire resistant moulded PVC sheet with 2, 4, 6 raised panel design in different plain and or prelam PVC sheet on other side after routing the moulding design on flush doooor & 2mm plain and or prelam PVC sheet on other side using rubber based adhisive on the PVC lipping etc. complete as per direction of Engr-in-Charge incl supplying and fixing in frame at site as per specication and apporved by GE etc complated all asspecified and directed. |
| 75 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing, complete all as specified. |
| 76 | S&F 20mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 77 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing, complete all as specified. |
| 78 | S&F 15mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 79 | M&L for Cutting holes into or through brickwalls built in cement mortar n.exc 150 Sqcm superficial area & making good after pipes lines are laid by using PCC(1:2:4) , complete all as specified. |
| 80 | Supply and fix in repair white rectangular PVC water storage tanks (Loft tank) of capacity 275Ltrs with complete fitting including fixing 03 Nos tank nipples of GI/ PPR with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed. |
| 81 | Supply and fixing in repair PVC profile suitable for PVCLoft tank of capacity 275Ltrsincluding fixing of necessary aluminium channel around the profile complete all as specified and directed. |
| 82 | Supplyingand fixing in repairs brass float valve flat type of size 15 mm bore, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes includingnecessary GI fittings complete all as specified. |
| 83 | S&F as in repairs 15mm fancy type chromoum plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 84 | S&F as in repairs brass chromium plated shower rose 125mm size, including fixed to steel tube, complete all as specified and directed. |
| 85 | S & F in repairsstop valve /angle valve fancy type chromium platedscrewed down, high presure with butterfly handle screwed both ends for pipeand fixed to pipe of15mm dia bore complete all as specified and as directed. |
| 86 | Supply and fix Hand Shower (Health Faucet) with 1 Meter Longflex tube in chrome finish including holder complete all as specified and directed. |
| 87 | Supply andfix chromium plated brassBib cock two way suitable for 15mm bore GI tubing and health faucet complete all as specified. |
| 88 | Supply andfix fancy type chromium plated brass Bib tap with nozzle for washing machine suitable for 15mm bore GI tubing with necessary fittings complete all as specified. |
| 89 | Supply and fix in repairs pressure reducing valve gun metal20 mm dia (ISI marked) heavy duty screwed down for iron pipe PRVs of sizes up to 16 storey buildings with necessary scaffolding or props as required. |
| 90 | Supply andfix fancy type chromium plated brass mixer unit 3 in 1 with wall flange suitable for 15mm bore GI/ PPR tubing with necessary fittings complete all as specified. |
| 91 | S&F anodised aluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified. |
| 92 | Taking down copper/ aluminium point wiring (light, fan, socket or power)complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition sepertately) and making good disturbed surfaces of walls, floors etc. |
| 93 | Material & Labour for point wiring conforming to IS-732:1989 complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheated copper conductor, 1100 volts grade conforming to IS-694:1990 drawn through and including PVC medium grade non-metallic concealed conduit ISI marked with accessories concealed in wall/floor including cutting chases, pining etc with modular metallic ISI marked terminal boxes, concealed in wall (PVC casing caping of suitable size shall be used where ever concealing is not possible) including one single core FRLS PVC insulated and sheathed multistanded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :- Note:- (i) PVC Casing caping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/ beam/ column/ ceiling etc.) The same shall be deemed to included in the quoted rate. No extra cost shall be paid for the PVC casing caping item.(ii) Separate circuit shall be drawn from MCB. No taping from light circuit.(iii) Modular metal flush box shall be paid separately under relevant items of this schedule. (iv) Circuit conductor from MCB DB to switch boards should not be less than 2.5 sqmm for following(a) Switch boards having light/fan point and 6A socket in common circuit.(b) Multiple socket outlets 6A. |
| 94 | (a) One light point controlled by one switch SP one way. |
| 95 | (b) One ceiling fan point controlled with one 6A switch |
| 96 | (c)One exhaust fan point controlled with one 6A switch |
| 97 | (d)One 3 pin socket outlet 5 Amps on independant board. |
| 98 | (e)One 3 pin socket outlet 5 Amps on same board with other switches. |
| 99 | (g)One bell pontcontrolled by one bell push 6 amps independent board. |
| 100 | All as per item No. 02 here in before point wiring but for 16 amps socket complete with 2.5 sqmm single core multi stranded FRLS PVC insulated sheated copper conductor 1100 volts grade drawn through and including PVC medium grade non - metallic concealed conduit including one FRLS PVC insulated and sheathed multi stranded green colour copper conductor 2.5 sqmmas earth continuity conductor connected to comon earth as earth dolly. Note:- (i) PVC Casing caping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/ beam/ column/ ceiling etc.) The same shall be deemed to included in the quoted rate. No extra cost shall be paid for the PVC casing caping item.(ii) Separate circuit shall be drawn from MCB. No taping from light circuit.(iii) Modular metal flush box shall be paid separately under relevant items of this schedule.(iv) Circuit conductor from MCB DB to switch boards should not be less than 2.5 sqmm. |
| 101 | Supply & Fixing modular switch, 6 Amps , One way, one module , ISI marked complete all as specified and directed. |
| 102 | Supply & Fixing modular type bell push 6 amps 1 module, ISI marked complete all as specified and directed. |
| 103 | Supply & Fixing modular switch, 16 Amps , One way, one module , ISI marked complete all as specified and directed. |
| 104 | Supply & Fixing bell electric AC 230 Volts single pole ding dong with ISI markedcomplete all as specified and directed. |
| 105 | Supply & Fixing modular socket, 6 Amps, 3 pin, two module, ISI marked complete all as specified and directed. |
| 106 | Supply & Fixing modular socket, 16 Amps , 3 pin combined , two module , ISI marked complete all as specified and directed. |
| 107 | Supply & Fixing ceiling rose surface bakelite with ISI mark, three terminals complete all as specified anddirected. |
| 108 | Supply & Fixing Modular white cover plate with Frame 1 Module, ISI marked complete all as specified and directed. |
| 109 | Supply & FixingModular white cover plate with Frame 2 Module, ISI marked complete all as specified anddirected. |
| 110 | Supply & Fixing Modular white cover plate with Frame 3 Module, ISI marked complete all as specified anddirected. |
| 111 | Supply & Fixing Modular white cover plate with Frame 4 Module, ISI marked complete all as specified and directed. |
| 112 | Supply & Fixing Modular white cover plate with Frame 6 Module, ISI marked complete all as specified and directed. |
| 113 | Supply & Fixing Modular white cover plate with Frame 8 Module, ISI marked complete all as specified and directed. |
| 114 | Supply & Fixing Modular white cover plate with Frame 12 Module, ISI marked complete all as specified and directed. |
| 115 | Supply & Fixing Modular metal flush box 01 or 02 module ISI marked andflushed in walland making good surface complete all as specified and directed. |
| 116 | Supply & Fixing Modular metal flush box 3 module, ISI marked and including flushed in walland making good surface complete all as specified and directed. |
| 117 | Supply & Fixing Modular metal flush box 4 module, ISI marked and including flushed in walland making good surface complete all as specified and directed. |
| 118 | Supply & Fixing Modular metal flush box 6 module, ISI marked and including flushed in walland making good surface complete all as specified and directed. . |
| 119 | Supply & Fixing Modular metal flush box 8 module, ISI marked and including flushed in walland making good surface complete all as specified and directed. |
| 120 | Supply & Fixing Modular metal flush box 12 module, ISI marked andincluding flushed in walland making good surface complete all as specified and directed. |
| 121 | Supply and fixing integrated LED batten 20 Watt, 4 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and directed. |
| 122 | Supply and fixing integrated LED batten 10 Watt, 2 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 123 | M&L for Lampholder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as directed by engr-in-charge. |
| 124 | Supply & Fixing inverter typeLED lamp 14 Watts complete all as specified and directed by Engineer-in-Charge. |
| 125 | Supply & Fixing MCB DB SPN 18 way suitable for single phase AC supply, 230 V sheet steel powder painted enclosure double door type with minimum IP-43 degree of protection withbuilt in 200 Amps copper bus bar, neutral link and earth link complete including flush off in wall with cutting and making good the disturbed surface including connection of circuits with copper pin terminals complete all as specified and directed. |
| 126 | Supply & Fixing MCB DB SPN 4 way suitable for single phase AC supply, 230 V sheet steel powder painted enclosure double door type with minimum IP-43 degree of protection withbuilt in 200 Amps copper bus bar, neutral link and earth link complete including flush off in wall with cutting and making good the disturbed surface including connection of circuits with copper pin terminals complete all as specified and directed. |
| 127 | Supply & Fixing in repair ISI marked 63 Amp, 30mA, 230V, DP RCBO, conforming to IS:12640 (Part 2)-2016, having front face indication for earth leakage fault, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP20 protected lower terminals and sliding shutters, complete all as specified and directed by the Engineer-in-charge. |
| 128 | S & F MCB SPN upto 32 Amps, 240 Volts, C Series complete all as specified and directed. |
| 129 | S & F MCB SP 6-32 Amps, 240 Volts, C Series complete all as specified and directed. |
| 130 | Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces. |
| 131 | Supply and fixing submain wiring with proper colour coding,2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC concealed conduit of suitable size not less than 25 mm , ISI marked including 1 single core cable with strandedsheathed copper conductor of size 4 Sqmm(green colour) for earthing. (For AC & Geyser Points)Note : (i) 2 runs of 4 Sqmm cable of 01 m each, 1m of PVC Conduit and 1 m of 4 Sqmm cable as earth wire shall be measured as 1 RM for payment purpose.(ii) Each Submain Wiring shall run in Seperate PVC Conduit.Note:- PVC casing caping wiring shall be provided where concealed wiring is not feasible (i.e conctete surface/beam/column/ceiling etc).The same shall be deemed to included in the quoted rate. No extra cost shall be paid for the PVC casing caping item. |
| 132 | Supply and fixsubmain wiring in repair 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 16 Sqmm in and including PVC conduitin wall of size not less than 25mm dia including 1 single core cable with stranded copper conductor of size 16 sqmm(green colour) for earthing. Note :- (i) Two runs of 16 Sqmm cable, 1 run of PVC casing caping/ conduitand 1 run of16 Sqmm cable shall be measured 1 RM for payment purpose.(ii) Each submain wiring shall run in seperate conduit |
| 133 | Supply & Fixing MCBAC/Geyser metal clad plug and socket enclosure box complete with and including 6 pin socket, plug top, mini MCB SP 25 Amp capacity, fixed on c metal flush box of suitable size complete all as specified and directed. |
| 134 | Supply and fixing ceiling fans complete with aluminum blades, down rods with safetyGIwire connecting up to fan hook,electronicregulatormodular type and accessories , 230 volts, 1200 sweep.Minair delivery 245 CFM with service value 8.75 CMM/W with brushles diret currentmotor 28 W, minimum rated speed 350 RPM, No of speed -5, insulation resistance above 2 mega ohm, No of blade - 03 Nos, TDH below 10%, class B insulation, starting voltage 120 V maximum BIS certified andconnecting up including provision of flexible 3 corecopper cable complete all as specified and directed. |
| 135 | Supplyand fixingexhaust fan , Plastic body AC single phase, 230 volt of size 250 mm sweep1280 RPM, 36 watt, Air delviry 800 cmh, no of blade -05 nos, insulation resistance - 2 mega ohm, with blades, and frame andlouverscomplere fixing arrangements on the wall/windowwithnuts and boltsmaking the good surfcesall as specifed and directed. |
| 136 | S&F Exhaust fan230mm sweep, 1250 RPM metallic body without sound, AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site. |
| 137 | Supply & Fixing modular TV Socket ISI marked including flush box and cover plate with frame complete all as specified and directed. |
| 138 | Supply & Fixing Telephone Socket RJ 45, ISI marked complete including flush box & cover plate and frame as specified and directed. |
| 139 | M & L for Rigid non-metallic medium grade ISI marked PVC conduit not less than 20mm dia and 1.2mm thick concealed in wall inclusive of boxes (junction/ terminal) all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. all as specified and directed. |
| 140 | Supply, fixing, testing and commissioning of instant type water heater (geyser) vertical type of 03 Ltrs capacity, single phase, rust Resistant, ABS body stainless steel inner tank SS 304 with thermal cut off with power consumption 3000 watts,5 star rated, ISI marked, rated pressure - 60 (Class I), BIS certified including fixing on wall with chromium plated screws & nut bolts connected to existing water and electric connection complete all as specified and directed by the Engineer-in-charge. |
| 141 | Supply, fixing, testing and commissioning of storage type water heater (geyser) horizontal type of 06 Ltrs capacity, single phase, rust Resistant, ABS body stainless steel inner tank, rated pressure 0.8 with thermal cut off with power consumption 2000 watts,5 star rated,ISI marked,including fixing on wall with chromium plated screws & nut bolts connected to existing water and electric connection complete all as specified and directed by the Engineer-in-charge. |
| 142 | Supply and fixhot water extension pipe made out of copper chromium plated 450mm long with brass adaptor and fixing in position complete all as specified and directed. |
| 143 | Supply and fix450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specified and directed. |
