|
| 1 | Dismantling of floor/ wall tiles including cement mortar bedding of any thickness upto PCC/ RCC/brick surface and rubbish off the premises, complete in all respect all as specified and directed. |
| 2 | Dismantling asbestos cement sheet, ridge(corrugated, semicorrugated, plain etc.) in roof covering,wall etc or of similar types complete allas specified and directed. |
| 3 | Dismantling of timber scantlings 40 sqcm & over in section framed work complete all as specified and directed. |
| 4 | S &F second class hardwood plain, solid straight, chowkats and frames, wrought, framed rebated on the solid ,rounded or chamfered,put together with glue pinned at joints, complete in all respect as specified and directed. |
| 5 | S&F coloured 0.50mm thick pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheethaving tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws alongwith bitumen washer complete allas specified and directed. |
| 6 | S&F coloured 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheethaving tensile strength of 550 Mpa as in ridge, valley gutter or of similar type, fixed with self tapping screws alongwith bitumen washer complete allas specified and directed. |
| 7 | Dismantling of cement concrete (unreinforced) in ground floors and pavings not exceedings 15 cm thickness (below or above ground level), complete in all respect as specified and directed. |
| 8 | Taking down shutter and refixing in same opening after easying n. exc 1 sqm andeach, complete in all respect as specified and directed. |
| 9 | Taking down shutter and refixing in same opening after easying exc 1 sqm and n. exc 2 sqm each, complete in all respect as specified and directed. |
| 10 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 11 | Taking down cement plaster of any thickness and description on brick/ concrete/ stone wall/ ceilings, etc, including raking out joints, hacking for key, scrubbingdown with water etc, complete in all respect as specified and directed. |
| 12 | M&L for Providing and laying for cement concrete in coping, hold fasts, 1:2:4 type B-1 (using 20mm nominal size crushed stone aggregate) as or of similar type of work including necessary formwork complete as specified and directed. |
| 13 | M&L for 25 mm thick of cement concretetype B 0 (using 12.5 mm nominal size crushed and graded stone aggregate) and finished even and fair without using extra cement, complete in all respect as specified and directed. |
| 14 | M&L for Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile fixed over and including 15 mm thick screed bed in cement mortar (CM) 1:6, complete all as specified and directed. |
| 15 | M&L for Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.15 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick rendering in cement mortar (CM) 1:4, complete in all respect as specified and directed. |
| 16 | S&F Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality \"A\") including necessary welding complete complete allas specified and directed. |
| 17 | M&L for 15 mm thick plastering on brick/ stone/ concrete surfaces of wall in cement mortar (1:4), finished even & smooth without using extra cement, complete in all respect as specifed and directed. |
| 18 | M&L for 15 mm thick plastering on brick/ stone/ concrete surfaces of of wall in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 19 | Supply only water proofing compound complete, in all respect as specified and directed. |
| 20 | S & F in repair 15mm bore concealed long neck , CP finished auto closing concealed urinal flush valve, cast copper alloy, screwed down, highpressure, withscrewed both ends foriron pipe orfor unions and fixed complete all as specified and directed. Item as per Make Jaguar Cat part No. PRS-CHR-073 or equivalent as approved by GE from list of makes. |
| 21 | S & F Stainless Steel pipe 20mm dia curtain rod with fixing bracket, stops, rollers etc. complete all as specified and directed |
| 22 | S&F in repair exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type including dismantling of existing false ceiling boards, complete in all respect as specified and directed. |
| 23 | S&F in repair Providing and fixing false ceiling at all height including fixing of frame work made of special section power press from m.s Sheets and galvanized with zing coating of 120 gram g.m.s /sqm includind fixing Perimeter channels 0.5 mm thick 27mm height Heading flages of 20 mm and 30mm long, the Perimeter of ceiling fix to wall with the Help of rawl plugs including fixing of 12mm Gypsum board including jointing and Finishing to a flush finish. With putty , Primer and double coat ceiling paint finish including dismantlling of existing false ceiling complete in all respect as specified and directed. |
| 24 | M&L for Providing and laying plinth protection of 75mm thickcement concrete, 1:3:6, type C-1 (using 20mm nominal size crushed and graded stone aggregate), laid in alternate penals/bays and finished the surafce even and smooth without using extra cement complete in all respect as specified and directed. |
| 25 | S & F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mmincluding necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 26 | S & F powder coated aluminium three tier window frame including necessary joining cleats, of Jindal section No 20832 or equivalent section of appd make of 1.5mm thick complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 27 | S&F 150mm length of bolt, Aluminium anodised, barrel tower bolt of extruded section complete allas specified and directed. |
| 28 | S&F 125 mm size, Aluminium handle cast type anodised complete allas specified and directed. |
| 29 | S&F aluminium anodised sliding door bolts with hasp and staple (boil type) 19mm dia bolt 300 mm long complete allas specified and directed. |
| 30 | S&F 30mm thick flush shutter, solid core construction, with block board core with decorative face veneers with lippingon both sides complete allas specified and directed. |
| 31 | S&F 100mm size Stainless steel butt hinges complete allas specified and directed. |
| 32 | Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall 110 mm bore fixed with pipe clamps over walls including dismantling and breaking up drain pipes complete all as specified and as directed. |
| 33 | Supply and fix PVC (SWR) bend of any radius, 110 mm bore with access door complete all as specified and as directed. |
| 34 | M & L for brick work with sub-class \"B\", old size bricks of class designation 75, straight or curved on plan exc. 6m mean radiusbuilt in CM (1:6) including dismataling of brick work built in cement mortar in any position complete in all respect as specified and directed. |
| 35 | M & L for 15mm thick plastering on wall in cement mortar(1:4) finished even and smooth without using extra cement on one side of lathing or stone masonary surface other than fair face complete in all respect as specified and directed. |
| 36 | M & L for 15mm thick plastering on wall in cement mortar(1:6) finished even and smooth without using extra cement on other side of lathing or stone masonary surface other than fair face on other side of lathing complete in all respect as specified and directed. |
| 37 | S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete in all respect as specified and directed. |
| 38 | Taking downplastering onlathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered complete allas specified and directed. |
| 39 | M&L for any colour of granite stone without white spots Granite stone slab 17 to 19 mm thick, as in floor, dado, steps, laid over and including screed bed 15 mm thick in cement mortar (CM) 1:6, jointed and pointed with white cement mixed with pigment to match the shade of stone including cuttingl rubbing and polishing surface, including cutting for wash hand basin, sink, gas pipe hole etc., to the entire satisfaction of the Engineer-in-Charge, complete in all respect as specified and directed. |
| 40 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) in any position, complete in all respect as specified and directed. |
| 41 | M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper (OBD) and finished top coat with spunge roller over and including one coat of alkali resistant priming paint and 2 mm thick (in two layers) wall care putty including preparation of surfaces complete in all respect as specified and directed. |
| 42 | M&L for preparation of old decorated plastered surface of wall after complete removal of existing treatment and applying two coats of weather coat over and including a coat of primer and 2 mm thick wall care putty (in two layers) including preparation of surface, complete in all respect as specified and directed. |
| 43 | S&F 5 mm thick of bevelled edge mirror of selected quality decorative type mounted on 6 mm commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 44 | M&L for coloured rubber moulded, glazed pre coated chequered cement concrete tiles of any shape and size, 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. (Sample as approved by GE). |
| 45 | M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate)as in foundaion and mass fillingcomplete all as specified and directed. |
| 46 | M & L for Broken stone orboulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 47 | M&L for preparation of new undecorated wooden surfaces with pre mixed wood filler used as putty of grith exc 10cmand applyingtwo coats of synthetic enamel paintover one coat of pink primer before painting complete all as specified and directed. |
| 48 | M&L for preparation of old undecorated steel surfaces with pre mixed steel filler used as putty and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 49 | M&L for preparation of new undecorated steel surfaceswith pre mixed steel filler used as putty for steel work and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer before painting complete all as specified and directed. |
| 50 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, complete all as specified and directed. |
| 51 | S&F stainless steel wire cloth,0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete all as specified and directed. |
| 52 | M&L for Providing and laying reinforced cement concrete 1:2:4 type B-1, (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc complete all as specified and directed. |
| 53 | M&L forformwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete all as specified and directed. |
| 54 | S & F 10mm dia and over TMT bar cut to length bent to shape required, including cranking, bending spiarlly for hooping for colums, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 55 | S & F 5mm dia and over upto and including 10mm dia TMT bar cut to length bent to shape required, including cranking, bending spiarlly for hooping for colums, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips for stirrups, spacers and binders complete in all respect as specified and directed. |
| 56 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 65 X 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of enineer-in-Charge (M.S. hold fast/lugs or SS dash fastener shall be paid for seperately)Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 57 | S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work conforming to Fe. 290, Gde-E-165complete in all respect as specified and directed. |
| 58 | M&L for preparation of newly plastered surface of wall and applying two coats of weather coat over 2 mm thick wall care putty over a coat of primer including necessary preparation of surface, complete in all respect as specified and directed. |
| 59 | S&F in repair Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed. (Item as per make Jaguar Cat part No. URS-WHT-13253N or equivalent as approved by GE from list of makes. |
| 60 | S&F in repair PVC valveless, syphonic action type, low level dual flush cistern 10 ltr capacity, white, wtih inlet, ball valve, float and handle including brackets & flush pipe of polyethylene for low or high level cistern of required height of high density PVC, 32 mm dia pipe, complete in all respect as specified and directed. |
| 61 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 62 | S&F in repair 15 mm bore fancy type CP finished angle valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 63 | S&F in repair long body Bib taps of 15 mm bore, fancy type CP finish cast copper alloy with crutch handle, screwed down, screwed for iron pipes, complete allas specified and directed. |
| 64 | S&F 75 mm dia of outlet, PVC (SWR) nahani trap, plain with SS grating of size 150mmX150mm, 0.75mm thick openable at center including jointing with solvent cement, complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 75 mm bore, complete all as specified and directed. |
| 66 | S&F in repair PVC (SWR) single (single \"T\") equal or unequal 110mm bore pipe with access door, complete all as specified and directed. |
| 67 | S&F in repair PVC (SWR)single (single \"T\") equal or unequal 75mm bore pipe with access door, complete all as specified and directed. |
| 68 | S&F in repair PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 75 mm bore, complete all as specified and directed. |
| 69 | S&F in repair PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed. |
| 70 | S&F in repair PVC (SWR) vent cowl 110 mm dia bore, complete all as specified and directed. |
| 71 | S&F in repair 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 72 | S&F in repair 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 73 | S&F in repair 20 mm bore of Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete in all respect as specified and directed. |
| 74 | S&F three layered white in colour rotational moulded made out from LLDPE material water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) including three tank nipples of 20 mm nominal bore dia hoisted and fixed in position including dismantling/ taking down all as specified in SSR part I, complete in all respect as specified and directed. |
| 75 | S&F CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed. (Item as per Cat Part No. ALI-CHR-85041 of Jaguar or equivalent as approved by GE from the makes as specified in list of makes) |
| 76 | S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. (Item as per Cat Part No. F-160002 of Hindware or equivalent as approved by GE from the makes as specified in List of Makes.) |
| 77 | S & F in repair vitreous china wash down water closet Pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and directed. |
| 78 | S&F solid PVC wall lining cosisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing, complete in all respect as specified and directed. |
| 79 | S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, complete in all respect as specified and directed. |
| 80 | S&FFactory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 81 | S & F 12 mm thick plywood boards, grade BWP, type BB fixed with screws to timber frame work for wall Panelling framing complete in all respect as specified and directed |
| 82 | S&F Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges cast copper alloy, chromium plated finish, complete in all respect as specified and directed. |
| 83 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 84 | S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed. |
| 85 | M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished top one coat with spunge roller over and including one coat of alkali resistant priming paint and 2 mm thick (in two layers), wall care putty, complete in all respect as specified and directed. |
| 86 | S&F 8 mm thick curved shaped urinal partition with frosted glass size 900 x 450 mm including stainless steel fixing brackets complete in all respect as specified and directed. Jaguar Cat Part No-JSE-CHR-110UC450X or equivalent as approved by GE from list of makes. |
| 87 | Taking down carefully casing and caping copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. |
| 88 | M & L for point wiring in replacement with 1.5 sqmm (nominal area) FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of size not less than 20 mm dia concealed in wall, pressed steel concealed terminal boxes of required size and with top cover 3 mm thick of plastic laminated sheet of reqd colour, painting terminal boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including 1.5 Sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dollyfor fan / light / exhaust fan/ bell point controlled by one switch. Note:- (i) Cost of PVC conduit, steel terminal boxes, plastic laminated sheet cover etc; are deemed to be included in the quoted rate. (ii) M&L for cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. |
| 89 | All as per item 88 above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 90 | All as per item 88 above but for 3 pin 5 Amps switch socket on Same board with 1.5 sq mm copper cable complete all as specified and directed. |
| 91 | All as per item 88 above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 92 | Labour onlyfor refixing of point wiring with existing 1.5 sqmmFRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade (MMS ISI) of size not less than 25 mm (or conduit as site requirement)in wall/over ceiling,modular metal flush boxes of required size and with modular plates incl of all accessories and all as specified including existing 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dollyfor light / fan point controlled by one switch.Note:- (i) Cost of PVC conduit, modular plates,frames, cover plates etc are included in the quoted rate.(ii) M&L for making good disturbed surfaces including finishing with cement mortar (1:3) etc are deemed to be included in the quoted rate.(iii) Wire obtained from Item No 87 above shall be reused. |
| 93 | All as per item 92 above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 94 | All as per item 92 above but for 3 pin 5 Amps switch socket on Samet board with 1.5 sq mm copper cable complete all as specified and directed. |
| 95 | All as per item 92 above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 96 | Labour only for rerefixing of modular switch10A,1 module single pole, one waycomplete all as specified and directed. |
| 97 | Labour only for refixing of modular socket outlet 5 pin ,10 Amps,2 module, 240 Volts complete all as specified and directed. |
| 98 | Labour only for refixing of modular switch16A,1 module single pole, one waycomplete all as specified and directed. |
| 99 | Labour only for refixing of modular socket outlet 5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 100 | Labour only for refixing of ceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 101 | Labour only for refixing ofmodular step type electronic fan regulator , two module 120 watt single pole 240 Volts complete all as specified |
| 102 | S&F in replacement LED batten luminaires, 20/22 watts, CW/WW colour lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from connector and ceiling rose, complete all as specified and directed. |
| 103 | Supply and fixing in replacement LED luminaire in CW/WW colour 600 mm x 600 mm, 35/36 watt, 220 V AC Recessed/Surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 104 | S & F in replacement modular switch10A,1 module single pole, one waycomplete all as specified and directed. |
| 105 | S & F in replacement modular socket outlet 5 pin ,10 Amps,2 module, 240 Volts complete all as specified and directed. |
| 106 | S & F in replacement modular switch16A,1 module single pole, one waycomplete all as specified and directed. |
| 107 | S & F in replacement modular socket outlet 5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 108 | S & F in replacement ofceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 109 | S & F in replacement of modular step type electronic fan regulator ,two module 120 watt single pole 240 Volts complete all as specified |
| 110 | S & F in replacement sheet metal enclosure double doorfor MCB DBs SPN 4 way 240 V, complete flush mounted all as specified and as directed. |
| 111 | Supply and fixingin replacement 6-32 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole(SP) in the MCB DB complete with connection testing and commissioning. |
| 112 | S & F in replacement MCB Single pole & neutral (SPN)32-40 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 113 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I complete alll as specified and directed. |
| 114 | NOTES:1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
