|
| 1 | M&L for preparation of oldplastered surfaces of wall,by washing, rubbing down and stoping of distempered and painted surface etc, and applyitng one coat of distemper oilemulsion,etccomplete all as specified & directed. |
| 2 | M&L for complete removal of existing treatment on old surface of wall and preparing surfaces as directed byapplying thin layer of wall care putty of 1 mmto 2mm thick and finally applying two coats of distemper oil emulsion over a coat of primer,etc complete all as specified & directed. |
| 3 | M&L Prepration of old painted or plastered surface of wall washing, rubbing down andapplying onecoat of cement base paint etc, complete all as specified & directed. |
| 4 | M&L rendering 10mm thick plaster in cm 1:6 on fair faces of brick work or concrete surface including finishing top even and smooth without using extra cement etc,complete all asspecifeid and directed. |
| 5 | M&L for rendering 15mm thick in CM 1:4 and finished fair and even etc complete all asspecifeid and directed. |
| 6 | M&L for preparation of new plastered surfaces of wall and applying two coat ofdistemper oil emulsion over a coat of primer etc complete all as specifed and directed |
| 7 | M&L Prepration of newly plastered surface of wall and applying two coat of cement base paintover a coat of primer etc complete all as specifed and directed |
| 8 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0 sqm each and making good to disturbed surfacesand removing unserviceable material from site of work complete all as specified and directed by the Engineer-in-Charge. |
| 9 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.11 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, etccomplete all as specified & directed. |
| 10 | M&L for Glazed ceramic coloured tiles in verticle surface 350x250x7mm / 450 x350 x7 mm thick set and jointed in neat cement slurry and pointed with white and colour cement to match including rendering 10mm thick as in backing wall plasterin CM 1:4, etc complete all as specified & as directed. |
| 11 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames etccomplete all as specified & as directed. |
| 12 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,etccomplete all as specified and as directed. |
| 13 | M&L preparing old wood and wood basedsurface of any description, over 10 cm width or girth, not otherwise described and evenly applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | M&L Preparation of oldsteel surface of any description, over 10 cm width or girth and applying onecoats of Synthetic enamel paintcomplete all as specified & as directed. |
| 15 | M&L Preparation ofold paintedsteeland iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (1st quality) on CGI Sheet of roof including necessary scafolding including cleaning stoping and rubbing down and removing all drops etccomplete all as specified & as directed. |
| 16 | Hacking out old broken glass (any thickness, size,quality or descriptioin) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed. |
| 17 | S&F 2.5mm to 3mm thick PVC transparents/ frosted window panes ordinary quality and glazing with oil putty / wooden beads as required in squares n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 18 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm andfixed withsteel wire staples complete all as specified & directed. |
| 19 | S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 20 | S&F 100mm butt hinges,ediumweight ,cold rolled mild steel& fixed complete all as specified & as directed. |
| 21 | S&F 125mm size aluminium handles, cast type, anodized and fixed etccomplete all as specified &directed. |
| 22 | S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon,flush pipe, brackets etccomplete all as specified &directed. |
| 23 | S&F Wash basins white, vitreous China, flat back, size 580x450mm,excluding taps, waste, chain and plug and porcelain stopper but including bracketsfixed to wall etccomplete all as specified & directed. |
| 24 | S&F vitreous china wash down watercloset, \"Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding etc complete all as specified & directed. |
| 25 | S&F fancy type 15mm dia Bib taps cast copper alloy,chromium platedscrewed down to iron pipe or for brass ferrule & fixed complete all as specified & directed. |
| 26 | S&Ffancy type15mm dia pillar taps, cast copper alloy with capstan heads,chromium plated , screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks & fly nuts, screwed for ironpipe & fixed complete all as specified & directed. |
| 27 | Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed. |
| 28 | S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed. |
| 29 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified & directed |
| 30 | S&F 600mmx450mm mirror of selected quality glass,mounted on 4mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws as cups washer fixed etccomplete all as specified as directed. |
| 31 | S&F15mm bore dia angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified & directed. |
| 32 | S&F 32mm waste cupling of PTMT (half or full threaded)minimum weight 40gm-60 gms) fixed in repair etccomplete all as specified and as directed |
| 33 | S & F in repairs Vitreous china bowl urinal flat back,size of 465x355x265 white (minimum)with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe) vitreous china urinals,bowl type (back or corner wall type),complete including provding and fixing plugs beddinf urinals against wall incement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement flush pipe grating and union for dischsrge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including urials spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms) etc complete all as specified and as directed. |
