Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5sqm, complete all as directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from frames) exceeding 1.5 sqm but not exceeding 4 sqm each, complete all as specified anddirected. |
| 3 | Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one coat of primer, size of frame 125mm x 60mm including filling of plain cement concrete (1:3:6) type C-0 (using 12.50mm graded crushed stone aggregate), complete all as specified and as directed . |
| 4 | Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one coat of primer, size of frame 105mm x 60mm including filling of plain cement concrete (1:3:6) type C-0 (using 12.50mm graded crushed stone aggregate), complete all as specified and as directed . |
| 5 | Factory made, HDF prelaminated moulded door shutter, 35mm thick (style with 2, 4 or 6 raised panel design with 2mm thick, 3D wood grain moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplied and fixed to frame at site all as per specification and drawing No CEUZ/TD-1343/2013 sheet No 1/1 complete all as specified. |
| 6 | Factory made, single piece wire gauzed panel HDF door shutter 35mm thick (style) with 2, 4 or 6 raised panel design including GI wire gauge complete supplied & fitted in the frame at site as per specification and drawing No CEUZ/TD-1343/2013 sheet No 1/1 complete all as specified. |
| 7 | Box typesteel window with side hung, double shutter with provision for desert cooler / AC (inside for wire mesh & out side for glass) including guard bar, hinges, steel, handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixedsteel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1517/2015 sheet No 1/3 to 3/3 and directed.(Note: Wire mesh and sheet glass shall be measured and paid separately). |
| 8 | Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 9 | Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with \"C type Gl or 40 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as perspecifications, complete all as specified and directed. |
| 10 | Box type steel ventilators top hung, double shutter (inside for wire mesh & outside for glass), including 8mm guard bar spacing 85mm both way, guard bar,hinges, steel handle tower bolt and steel peg stay complete with glazing bar dovetailed or weldedsteel ventilators shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1517/2015 sheet No 1/3 to 3/3 and directed.(Note: Wire mesh and sheet glass shall be measured and paid separately). |
| 11 | Sheet glass, 3.00mm thick, ordinary quality and glazing with oil puttyin square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 12 | Figured glass,3.00mm thick, pin head type and glazing with oil puttyin square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 13 | Stainless steel wire cloth of0.36mm nominal dia of wire and average width of aperture 1.40mm andfixed with stainless steel wire staples, complete all as specified and directed. |
| 14 | 150mm long, aluminium anodised barrel tower bolt of extruded section and fixed completed all as specified and directed. |
| 15 | 100mm long, aluminium anodised barrel tower bolt of extruded section and fixed completed all as specified and directed. |
| 16 | Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long, complete all as specified and as directed . |
| 17 | 100mm mild steel butt hinges, medium weight, cold rolled and fixed, completed all as specified and directed. |
| 18 | 150mm long aluminium handles cast type, anodised and fitted, completed all as specified and directed. |
| 19 | 100mm long aluminium handles cast type, anodised and fitted, completed all as specified and directed. |
| 20 | 300mm long ordinary brass rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed. |
| 21 | 25mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 22 | Applying two coat of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces, over 10cm width or girth including preparation of surfaces complete all as specified and directed at site. |
| 23 | Preparation of new steel surfaces over 10cm in width or girth, nototherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 24 | Mild steel drapery rod 25mm dia, plastic coated fixed on wall including providing rings through out the length at some intervals complete including taking out old drapery rod any type and size all as specified and directed. |
| 25 | Mild steel brackets powder coated (coloured) to hang curtain rodcomplete all as specified and directed. |
| 26 | Fancy type coloured PVC ball shaped knobs for curtain rod complete all as specified and directed. |
| 27 | 125mm long, hasp and staple, safety type, brass with aluminium anodised,with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 28 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc; completeallas specified and directed. |
| 29 | Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 30 | Rendering 15mm thick on other than fair faces ofbrick work in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and directed. |
| 31 | Complete removal of existing treatment on wall and applying two coats of cement base paint on old surfaces, height upto 4 storeys complete all as specified and directed. |
| 32 | Preparation of newly plastered or unplastered wall surface and applying two coats of oil bound distemper over a one coat of primer over and including 2mm thick wall care putty, complete all as specified and directed. |
| 33 | Preparation of new plastered surfaces of wall or concrete surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 34 | Rendering 5mm thick on concrete surface in cement mortar (1:3) finished even and smooth without using extra cement, complete all as specified and directed. |
| 35 | Preparation of new plastered surfaces of ceiling, chajjas facia etc; applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 36 | Complete removal of existing treatment on old surfaces on wall and applying two coats of oil bound distemper over a coat of primer over and including 2mm thick wall care putty, complete all as specified and directed. |
| 37 | Complete removal of existing treatment on ceiling and applying two coats of oil bound distemper over alkali resistant primer paint on ceiling surfaces, complete all as specified and directed. |
| 38 | Demolition of unreinforcement cement concrete of any description and in any position not otherwise specifically provided for, including removing all demolished material/debris exceeding 250m but not exceeding 500m from the site and depositing where directed complete all as directed. |
| 39 | PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate), 75mm thick as in plinth protection and finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 40 | Formingcontraction(Dummy)joints65mmdeepx 10mmwide,filledwithsealingcompoundgrade‘A’, complete all as specified and directed. |
| 41 | Plain Cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in sunken floor, filling and mass concrete, complete all as specified and directed. |
| 42 | Water proofing treatment to sunken portion of WCs bathroometc.; by applying cement slurry mixed with acrylic based polymer modified cementations composite compound:- (a) First layer of slurry cement @ 0.488 kg/ Sqm mixed with Acrylic based polymer modified cementations composite compound @ 0.253 kg/Sqm .The layer will be allowed to air cure for 4 hrs.(b) Second layer of slurry of cement @ 0.242 kg /Sqm mixed with Acrylic based polymer modified cementations composite compound @ 0.126 Kg/Sqm . The layer will be allowed to air cure for 4 hrs. |
| 43 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 44 | Demolition stone slabs and tiles of any description or thickness in floors, aprons and staircase etc., laid bedded and pointed in any mortar complete all as specified and directed. |
| 45 | Glazed ceramic coloured tiles of size (350mm x 250mm x 7mm/ 300mm x 450mm x 7mm thick), as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with the surface over and including 15mm thick screed in cement mortar (1:4) complete all as specified and as directed. |
| 46 | Non skid joint free coloured ceramic floor tiles 7mm to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match the surface with and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 47 | Non - skid Ceramic tiles 7mm to 8mm thick(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 20mm thick screed bed in cement mortar 1.6, complete all as specified and directed. |
| 48 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc;complete all as specified and directed. |
| 49 | Vitreous China squatting pattern Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) but including provision of lean concrete bedding connection to drain out pipe to flush pipe antisyphonage pipe etc; complete all as specified and as directed. |
| 50 | PVC valve less, symphonicactiontype, flushing cistern 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and as directed. |
| 51 | Corner wash hand basin/wall mounted basin of size 369mm x 369mm x 127mm excluding taps, chain and plug and porcelain stopper but including 32mm dia PVC waste pipe, waste fittings brass chromium plated etc; with long screwed shanks and fly-nuts, flange end and bedded in red lead cement and other end fixed suitable angle iron brackets with paintingscomplete all as specified and as directed. |
| 52 | Vitreous china wash basin, angle back, size (600x480)mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, including 32mm dia waste fittings, brass, chromium plated etc; with long screwed shanks and fly-nuts, flangea end and bedded in red lead cement and other end fixed suitable angle iron brackets with painting, complete all as specified and as directed. |
| 53 | 30mm dia, waste pipe white flexible PVC CP hose pipewith suitable length for wash basin & kitchen sink heavy duty hose pipecomplete all as specified and directed. |
| 54 | Soap dish, stainless steel, approximate size 130mm x 90mm x30mm fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 55 | Brass chromium plated mixer tap for mixing hot & cold water, screwed down for iron pipe or for iron pipe 15mm bore and fixed, complete all as specified and directed |
| 56 | 15mm bore, wall mounted, brass, wall mixer with stainless steel L-bend provn of overhead shower chrome finish for mixing hot & cold water screwed down for iron pipe and fixed. |
| 57 | Bib taps, cast copper alloy, screwed down, fancy type, chromium plated, screwed for ironpipe or brass ferrule for 15mm bore of pipe fixed in repair complete all as specifiedand directed. |
| 58 | Stop valves 15mm dia, cast copper alloy, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type) chromium plated, screwed both ends for iron pipe or for unions and fixed in repair complete all as specifiedand directed. |
| 59 | Angle cook/stop valve cast copper alloy 15mm dia, fancy type, chromium plated with long shank and cup screwed down, high pressure with capstan handle screwed both ends for iron pipes or for unions fixed in repair, complete all as specified and as directed. |
| 60 | Chromium plated swivel shower rose of size 15mm bore (minimum weight 40gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of CP any colour (minimum weight 40 gms) fixing to pipe or union of 15mm bore,complete all as specifiedand directed. |
| 61 | 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 5mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repair, complete all as specified and directed. |
| 62 | PVC connections, 15mm size with PTMTnuts of length 600mm, complete all as specified and directed. |
| 63 | Brass chromium plate tubular towel Rail 20mm dia, D type, 60cm long between flange fixed in repair, complete all as specified and directed. |
| 64 | Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with 32mm dia plugs, washers and waste pipe including bedding in cement mortar (1:3) to drawf wall or including fixing MS angle iron (35mm x 35mm x 5mm including primer and painting) cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified specified and directed. |
| 65 | Sink without drainage board made of stainless steel 1mm thick kitchen or laboratory with 32mm dia plugs, washers and waste pipe including bedding in cement mortar (1:3) to drawf wall or including fixing MS angle iron (35mm x 35mm x 5mm including primer and painting) cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified specified and directed. |
| 66 | Stainless steel plate rack wall mounted type with 5/6 partition of size 600mm x 900mm x250mm made out of 1mm thick, stainless steel sheetcomplete all as specified specified and directed. |
| 67 | Magic eye of steel body with magic glass complete all as specified specified and directed. |
| 68 | Floor doors stoppers of aluminium alloy body and tenque anodised with hard drawn steel spring fixed in floor 140mm long, fixed in repair, complete all as specified and as directed. |
| 69 | Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) (White in Colour and three layered) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including dismantling existing water tanks and removing to store complete all as specified and directed. |
| 70 | Ball brass, valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule for 20mm bore dia of pipe, complete all as specified and directed. |
| 71 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore complete all as specified and as directed. |
| 72 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore complete all as specified and as directed. |
| 73 | 15mm dia, steel water tubing, medium grade, galvanised, including short lengths,with all fittings and fixed complete to walls and laid in floor, complete all as specified. |
| 74 | 20mm dia, steel water tubing, medium grade, galvanised, including short lengths,with all fittings and fixed complete to walls and laid in floor, complete all as specified. |
| 75 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases forconcealed water tubing or concealed conduit wiring etc., and making good, cutting not exceeding 10cm girth, brick wallscomplete all as specified. |
| 76 | Stop valves 20mm dia, cast copper alloy, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type) chromium plated, screwed both ends for iron pipe or for unions and fixed in repair, complete all as specifiedand directed. |
| 77 | Demolition of reinforcement (reinforcement cut as required to facilitate demolition) cement concrete of any description and in any position not otherwise specifically provided live damaged surfaces irregular facia, chajjas and like on for complete all as specified and directed. |
| 78 | Reinforced cement concrete, type A-1, 1:1:5:3, using 20mm graded crushed stone aggregate as in shelves, chajja and the like complete all as specifiedand directed. |
| 79 | MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 80 | Green marble work 18mm to 20mm thick, makrana white (table rubbed and polished) in steps, jamps, pillars, windowcills, cooking latforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting for sink and including laid over 20mm thick screed bed in cement mortar (1:4)complete all as specified. |
| 81 | Dismantling of cast iron or reinforced concrete drain or PVC pipes, 110mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 82 | PVC (SWR) pipe 110mm dia, type \"B\", single socketed, in any length with rubber ring joints fixed to wall/floor, complete all as specified and directed. |
| 83 | PVC (SWR) bends, any radius, for 110mm dia of pipe, complete all as specified and as directed. |
| 84 | 110mm bore, mild steel, stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. |
| 85 | Aluminium Hat and coat hooks, solid body, 175mm to 250mm complete all as specified and directed |
| 86 | Demolition of brickwork or stone/boulders masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facing, dressed stonework and precast concrete articles complete all as directed. |
| 87 | Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc; complete all as directed. |
| 88 | Brick work with subclass \"B\" bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 89 | All as per Srl item No. 88 above here-in-before but except brick. |
| 90 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finishedsurfaces concrete flat, complete all as specified. |
| 91 | Formwork on rough finished surfaces to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/ PCC bands in walls,horizontal or sloping and similar work exceeding 5cm but not exceeding 10cm widecomplete all as specified. |
| 92 | Auto closing hinges 35mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed complete all as specified. |
| 93 | Stainless steel handles 100mm size for kitchen cabinet shutters fixed in repair, complete all as specified and directed. |
| 94 | 17mm thick, HDHMR board both side laminated any colour as in kitchen, wardrobe etc; complete all as specified. |
| 95 | 2nd class softwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, cross section area not exceeding 3sqcm, complete all as specified and directed. |
| 96 | Two coats synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces, not exceeding 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 97 | Machine cut kota stone slab (single piece using in treads) flooring 20mm to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting in square or rectangular and polishing including 15mm thick, screed bed in cement mortar (1:6) complete all as specified as in directed. |
| 98 | Kota stone slab (single piece using in riser) 20mm to 25mm thick in rise of steps, skirting, dado and pillar laid over cement screen and jointed including rubbing, cutting in square or rectangular and polishing including 15mm thick, screed bed in cement mortar (1:6) complete all as specified as in directed. |
| 99 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified as in directed. |
| 100 | Dismantling brick tiles or terracing tiles single layer on roofs including cleaning the roof surfaces and filling the cracks with silicon compound if obserbed on roof and removing building materials etc to a distance of 250m including loading, unloading and stacking, complete all as directed. |
| 101 | APP (atatic polypropylene) modified membrane 3mm thick and weight not less than 3.00 Kg per Sqm with 160 GSM/Sqm, non woven polyester mat as centre core reinforcement laid over a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm with 100mm over lap the membrane has to be laid with LPG torch and over lap sealed and finished neat over roof / sunken floor includingAPP membrane complete all as specified and directed.Note: APP based polymeric membrane of approved manufacturer will belaid/fixedby authorised person of the same manufacturers. |
| 102 | 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement included screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6)complete all as specified and directed. |
| 103 | Preparation and applying two coats of aluminium paint to surfaces of any description wood, steel, iron, concrete, brick, stone, APP membrane etc; exceeding 10cm in width or girth, complete all as specified and directed. |
| 104 | Plain cement concrete 1:2:4, (nominal mix) type B-0, using 12.50mm gradedcrushedstone aggregate, as in roof kerbs or mud stops, rounded or chamfered on edges and the like including use of necessary form work complete all as specified. |
| 105 | Rendering 10mm thick in cement mortar 1:4 on roof surfaces or finished even and smooth without using extra cement including use of liquid water proofing compound as per manufacuture instructions, complete all as specified and directed.Note: Liquid water proofing compound shall be measured and paid for seperately as supply only. |
| 106 | Supply only liquid water proofing compound. |
| 107 | Mild steel framed work such as grills, gratings. etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing , framedwork or water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 108 | Dismantling of asbestos cement (corrugated, semi corrugated; etc) sheets in roof coverings, complete all as specified and as directed. |
| 109 | Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 110 | Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 111 | Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 112 | 2nd class hard wood, 20mm thick, planed one side with butt joints boarding, with nails in any situation complete all as specified and as directed. |
| 113 | Demolition wall and ceiling boards (fiber, pulp, insulation; etc) or insulation boards / slabs / blankets; any thickness including cover fillets, complete all as specified and as directed. |
| 114 | 12mm thick, perforated particle board/ tiles for insula-tion and accoustic purposes, (60x60) cm in size, fixed with nails to timber frame work or with staples on anodised aluminium snap grid frame work, size of grid 605mm x 605mm for false ceiling complete all as specified and as directed. |
| 115 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 116 | Mild steel works as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 117 | Cast iron cowl 50mm bore pipe, complete all as specified and directed. |
| 118 | 50mm bore, cast iron soil, waste and vent pipes (Sand cast) in any length, with or without ears, with cement joints, fixed to walls complete all as specified and directed. |
| 119 | 100mm bore, cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for pipes, with oval access doors, complete all as specified and directed. |
| 120 | 100mm bore, cast iron bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed. |
| 121 | 100mm bore, cast iron soil, waste and vent pipes (Sand cast) in any length, with or without ears, with cement joints, fixed to walls complete all as specified and directed. |
| 122 | 100mm cast iron, sanitary connecton socket to fit WC out let complete all as specified. |
| 123 | 100mm bore, cast iron bends (any radius) with duck\"s foot or heel restcomplete all as specified and as directed. |
| 124 | 100mm bore, cast iron soil, waste and vent pipes (Sand cast) in any length, with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed. |
| 125 | 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as directed. |
| 126 | 75mm dia, PVC (SWR) multi floor trap with grating including jointing to with solvent cement to the CI pipes, complete all as specified and directed. |
| 127 | 75mm bore, cast iron bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed. |
| 128 | 75mm bore, cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for pipes, with oval access doors, complete all as specified and directed. |
| 129 | 75mm bore, cast iron bends (any radius) with duck\"s foot or heel restcomplete all as specified and as directed. |
| 130 | 75mm bore, cast iron soil, waste and vent pipes (Sand cast) in any length, with or without ears, with cement joints, fixed to walls complete all as specified and directed. |
| 131 | 75mm bore, cast iron soil, waste and vent pipes (Sand cast) in any length, with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed. |
| 132 | Mild steel, stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore of pipe, complete all as specified and as directed. |
| 133 | Mild steel, stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 50mm bore of pipe, complete all as specified and as directed. |
| 134 | Mild steel, stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore of pipe, complete all as specified and as directed. |
| 135 | Dismantling of cast iron or reinforced concrete or salt glazed ware drain pipes, 100mm dia jointed in cement mortar and taking out of trenches/walls, if required complete all as specified and directed. |
| 136 | Dismantling of cast iron or reinforced concrete drain pipe, 75mm dia jointed in cement mortar and taking out of trenches/walls, if required complete all as specified and directed. |
| 137 | Dismantling of cast iron or reinforced concrete drain pipe, 50mm dia jointed in cement mortar and taking out of trenches/walls, if required complete all as specified and directed. |
| 138 | Forming letters, figures etc. by cutting \"V grooves in cement plaster (per cm of height) complete all as specified and directed. |
| 139 | Writing letters or figures (Block. Roman, Italic or Indian) not exceeding 30cm high, letter shall be painted with thick enamel paint, so that they stand out boldly and solidly without showing signs of brush marks, complete all as specified and directed |
| 140 | Stops, commas, short lines, dashes, hyphens, brackets, etc. shall be painted with thick enamel paint, so that they stand out boldly without showing signs of brush marks, complete all as specified and directed |
| 141 | Cutting holes, superficial area exceeding 150 sqcm but not exceeding 400 sqcm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l using 20mm graded crushed stone aggregate as require complete all as specified and directed. |
| 142 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting outin any kind of soil and disposal of surplus excavated soil, within a lead of 50m, complete all as specified and directed. |
| 143 | Hard core of broken stone or boulders guage not exceeding 63mm, deposited, spreading in layer not exceeding 15cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed. |
| 144 | 100mm thick, plain cement concrete, 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floors and pavings complete all as specified and as directed. |
| 145 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 146 | Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified. |
| 147 | Earth work in excavation by mechanical means Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out in all kind of soil (the excavated soil) anddisposal of surplus excavated soil, within a lead of 50m complete all as specified and directed. |
| 148 | Plain cement concrete type D-2, (1:4:8) using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 149 | Reinforcedconcretepipes of 150mm bore, class NP-3with collars, laid and jointed complete all as specified and directed. |
| 150 | PCC 1:4:8 type D-2 (using 20mm graded crushed stone aggregate) as in concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed. |
| 151 | Brick work with subclass \"B\" brick using old size bricks , straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 152 | Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement including mixing of liquid water proofing compound as per manufacuture instructions, complete all as specified and directed.Note: Liquid water proofing compound shall be measured and paid for seperately as supply only. |
| 153 | Plain cement concrete 1:2:4,type B-1, using 20mm gradedcrushedstone aggregate, as in lintels upto 1.5m clear span, cills, steps, seismicand other similar bands, plinth courses, coping,benching, kerb, benching, bed plates and the likeincluding weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified. |
| 154 | Plain cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate, as in surface channel and drain, including use of form work, complete all as specified and directed. |
| 155 | Precast RCC (1:2:4) type B-1,using 20mm graded crushed stoneaggregate as in cover slab (for manhole etc), landing chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete set in cement mortar (1:6) including use of form work complete all as specified and directed. |
| 156 | MS TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 157 | Returning, filling in any kind of soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 158 | Cutting into existing manholes for 150mm dia pipe, connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l (using 20mm graded crushed stone aggregate) smooth finished and reforming benching as require complete all as specified and directed. |
| 159 | PCC 1:3:6type C-2,(using 40mm graded crushed stone aggregate) as in foundations, filling or mass concrete, complete all as specifed and directed. |
| 160 | PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregateas in concrete bed to drain pipes of bore 300mm including packing under and completely surrounding pipes with concrete after they are laid and tested in including necessary shuttering and supports, complete all as specified. |
| 161 | Reinforcedconcretepipes of 300mm bore, class NP-3with collars, laid and jointed complete all as specified and directed. |
| 162 | PCC 1:2:4type B-2,(using 40mm graded crushed stone aggregate) as in surface channel and drain, including use of form work, complete all as specifed and directed. |
| 163 | Extra for forming fair finished drain or channel 30cminner girth in cement concrete using extra cementincluding forms,moulds, mitred/stopped ends etc., complete all as specified and as directed. |
| 164 | Add or deduct from srl item No 163 above for each 25mm girth or part there of over or under 30cminner girth, complete all as specified. |
| 165 | Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power, security light)complete, includingfixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement for smooth finishing of holes, small patches etc,complete all as specified and directed. |
| 166 | Taking down carefully ceiling fan/exhaust fan/air circulator fan any sweep, any size, removing blades & deposited to MES store, complete all as specified and as directed |
| 167 | Taking down existing energy meters, keeping aside safely & refixing the same in its original position after completion of point wiring/sub main wiring, complete all as specified and as directed |
| 168 | Taking down existing electric water heater, keeping aside safely & deposit to MES store, completion of point wiring/sub main wiring, complete all as specified and as directed |
| 169 | Taking down MCB, DB of any size including MCB\"s of any size and making good disturbed surfaces, complete all as specified and as directed |
| 170 | Taking down existing light fitting of any size and making good disturbed surfaces, complete all as specified and as directed. |
| 171 | Point wiring for One light point/fan point/bell point controlled by one switch 5 Amp single pole one-way complete with 1.5 Sqmm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLSH cable drawn into and including PVC concealed conduit (heavy duty) and conduit fittings including 1.5 Sqmm PVC insulated unsheathed and multi stranded copper conductor FRLSH cable as earth wire to common earth and connecting to earth dolly including cutting of chases/wall/floor and suitable size of powder coated CRCA mild steel sheet modular sunken box for fixing switches, sockets, regulators with white frame and top white modular white cover plateand machine made brass screw and washers etc complete all as specified and directed. |
| 172 | All as per Srl item No. 171.00 above but for one socket outlet 3 Pin, 5 Amps on the same board |
| 173 | All as per Srl item No. 171.00 above but for one socket outlet 3 Pin, 5 Amps on the independent board. |
| 174 | All as per Srl item No. 171.00 above with 2.5 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor. |
| 175 | Modular switch, single pole,one way 5/6 Amps, 1 Module, complete all as specified. |
| 176 | Modular Bell push 5/6A, 1 module, 240V, complete all as specified and directed. |
| 177 | Modular socket, 3 pin, 5/6 Amps, 2 Module, complete all as specified. |
| 178 | Modular switch, single pole, one way, 15/16 Amps, 240 Volts, 1module, complete all as specified. |
| 179 | Modular socket, 15/16amps, 5 pin combined, 2 module, complete all as specified. |
| 180 | Ceiling rose 3 phase PVC/polycarbonate, isolated body, complete all asspecified and as directed. |
| 181 | Electric bell, AC, 230 volts single phase Ding Dong Type complete all as specified. |
| 182 | Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 183 | Decorative wall mounting, brushed nickel finish fixture with acrylic diffuser including 9 watt, LED Lamp B22 base complete all as specified and directed. |
| 184 | LED lights fitting 20W, 220V,4 feet, general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 185 | LED batten 5 watt, coolwhite tube light with 500 lumen for bathroom mirror fitting, complete all as specified and directed. |
| 186 | LED lamp, 9 Watt, complete all as specified and as directed. |
| 187 | LED security light fitting of capacity 25 Watt LED street light fitting in aluminium pressure die casting (PDC) housing, toughened glass cover including GI bracket of size 1.5m long, 40mm dia, GI pipe, made to shape fixed with clamps, nut bolts and all connected accessories, IP65 protection with suitable inbuilt surge protector and including cable connection from ceiling rose to light fitting complete all as specified and directed. |
| 188 | Ceiling fan complete with blades, down rods modular fan step regulator, 120W, 2 module and accessories, 230V, 1200mm sweep, min air delivery 210CFM, with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC), complete all as specified anddirected. |
| 189 | Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250mm, complete all as specified and as directed. |
| 190 | Taking down old sheet metal enclosure and supply and fix new sheet metal enclosure cubical type factory fabricated made out of 1.3mm thick CRCA sheet with front side open able single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door, IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc; of size 800mm x 600mm x 200mm complete all as specified and as directed.Note: Cost of any minor modification if required in fixing of the sheet metal enclosure as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item. |
| 191 | Sheet steel enclosure for DB\"s, MCB, DB, VTPN, 4 way double door, IP-43, complete all specified and directed. |
| 192 | Sheet steel enclosure for flush/surface mounting distribution board, factory made, protection class IP 36 suitable for mounting MCBs, 8 way with 200 amps tinned copper bus bar, cable lugs, double door complete all specified and directed. |
| 193 | MCCB, 125 amps, 4 pole, 415V, 16KA, including extended terminals complete all asspecified and as directed. |
| 194 | MCB, single pole & neutral, 240 volt, 10KA, \"C\" curve, 40 amp to 63 amp. |
| 195 | MCB, Single pole & neutral, 240 volt, 32 Amp, 10KA rating,\"C\" curve, complete all specified and directed. |
| 196 | MCB, Single pole, 240 volt, 5 Amp to 32 Amp, 10KA rating,\"C\" curve, complete all specified and directed. |
| 197 | Concealed sub main wiring of two run with 06 sqmm single core PVC insulated, FRLSH,flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including steel conduit 25mm dia , medium grade, ISI marked and fixed, including cutting /chasing as required and its accessories including one run of 6 Sqmm single core PVC insulated, FRLSH, multi stranded copper conductor cable as earth continuity conductor in green colour, connected to common earth dolly, complete all as specified and as directed.Note:- Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of steel conduit shall be measured as one unit only. |
| 198 | Earthing complete with galvanized steel earth plate electrode600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.Note:- On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction. |
| 199 | Making opening in brick/stone wall of size suitable for fixing of exhaust fan of 250mm and making good the disturbed surface as per existing complete all as specified and as directed. |
| 200 | Fixing only ceiling fan/exhaust fan including making necessary connection with 3 core flexible PVC copper wire from ceiling rose to connector of fan, complete all as specified and as directed. |
| 201 | Fixing only electric water heater including making necessary connection with 3core flexible PVC copper wire with 15 amp plug top from socket point complete all as specified and as directed. |
| 202 | Deduction to be made from BOQfor Sch \"A\" Part -II (Schedule of credit) amount during AOC.Note: Tenderers shall not quote for this schedule. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
