Tender For Addition / Alteration And Special Repairs To Certain Otm Accn At Binnaguri Mil Station Under Ge (N) Binnaguri And Ge (S) Binnaguri, Binnaguri-West Bengal

TDR : 53922936

Tender Notice
BOQ

26 Days Left

Binnaguri , West Bengal

Tender Brief : Tender For Addition / Alteration And Special Repairs To Certain Otm Accn At Binnaguri Mil Station Under Ge (N) Binnaguri And Ge (S) Binnaguri

Document Fees
₹ 3000 /-

EMD
₹ 1500000.0 /-

Tender Value
₹ 28.95 Crore /-

Submission Date
09-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	M&L for removing existing water proofing treatment to complete any descrption/any thickness and in any position up to mother slab including removal of rubbish of the premises etc. complete all as specified and directed by Engineer-in-charge.
2	M&L for 40 mm thick Cement Concrete 1:2:4, type B0 (using 12.50 mm Graded Stone Aggregate) as in as in roof to achieve slope on existing roof surface complete all as specified and as directed by Engr-in- Charge
3	M&L for Cement concrete type B-1, 1:2:4 (using20 mm graded crushed stone aggregates) as in roof kerbs or mud stops, padding over RCC roof slab (to maintain proper slope on roof of average 40 mm thick) rounded or chamfered on edges complete all as specified and as directed by Engineer-in-charge.
4	M & L for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge :- (a) 10 mm thickcement plaster in CM 1:4 with integral WPC to be laid over the RCC roof slab when the concrete is green.(b)Applying a uniform coat of bitumen primer @ 0.70 kg/sqm over cement plaster.(c)3 mm thick plain texture and weighing not less than 3.5 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reinforced with non woven polyster matt black finished over compatible primer at 0.4 Ltr / sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torching shall be 150 mm on length side and 100 mm on width side. after necessary preparation of surface complete as per manufacturers instructions.(d) Apply two coats of bitumastic - aluminium paint over the membrane.Note : WPC will be measured and paid separately.
5	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
6	M&L for coloured non skid joint free ceramic tiles (square/rectangular), area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
7	M&L for coloured non skid joint free ceramic tiles (square/rectangular), area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in vertical surfaces, in skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:3 complete all as specified and as directed.
8	M&L for Glazed Ceramic, coloured tiles (300 mm x 450 mm) size and 7 mm thick on vertical surfaces as in skirting/ dado, set and jointed in neat cement slurry and pointed in white cement mixed withadmixture ofpigment or colour cemet to match including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed.
9	Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and as directed.
10	M&L for 25 mm thick cement concrete Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) as in base to receive the screed bed complete all as specified and as directed.
11	M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregates), finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays & construction joints to be given at every 3m interval and corners of buildings and filled with bituminous mastic or equivalent filler complete all as specifed and as directed.
12	M&L for Plain Cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains etc including all necessary form work complete all as specified and as directed.
13	M&L for extra for forming fair finished drain or channel 30 cm and over inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed.
14	Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. bedded and pointed in any mortar including removing of demolished material from work site complete all as specified and as directed.
15	M&L for machine cut prepolished kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with M & L for screed bed or bedding layer of mortar of 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and as directed.
16	M&L for machine cut kota stone slab 20-25 mm thick on vertical surfaces like riser of steps, skirting, in single piece (of length not more than 1200 mm) over & including 15 mm thick (average thickness) cement mortar (1:4) screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and as directed.
17	M&L for Granite (of any type) slab 16 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 20 mm thickscreed bed in CM in 1:4 complete, all as specified as directed.
18	Sunken Flooring : M&L for water proofing treatment to sunken floor with the following course of treatment/ specification complete all as specified and directed :-(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer’s instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as per manufacturer’s instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm. This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementious compound @ 0.126 kg/sq. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces.(vi) Providing 150 micron thick polyurethane paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation. (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalent approved brand. Make of PU paint - Dek guard PU or equivalent approved brand.)(vii) 2 Nos 32 mm bore GI medium grade 450 mm long spout, to be provided through external wall to drain out accumulated water.(viii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M 7.5 stone agreegate.
19	S&F in repairs 4 mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sq. m in each pane including hacking out old ones complete, all as specified and as directed.
20	S&F powder coated (minimum 50 micron) anodised aluminium frame for doors, windows, ventilators,partition with one or more rebateswith stainless steel screws /including PVC protector sheeting and joining cleat for fixing etc. including taking down old one complete all as per architectural drawings and as directed by Engr-in-Charge.
21	M& Lin repair for fabrication and fixing of powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handlesetc complete for aluminium frame of size 101.6 mm x 44.45 mm x 2 mm and section of bottom and top rail of section 114 mm x 44.45 mm x 2 mm thick and and lock rail shutter frame of 83 mm x 44.45 mm x 2 mm with and including panels of 5.5 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2 mm x 16.66 mm scred for fixing fully including double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and all necessary fittinngs and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door shutter 1 no 200 mm long aluminium tower bolt per shutter including taking down old one complete all as specified and as directed by the Engineer-in-Charge.
22	S&F of Double Rebate windowsmade of pre-painted steel (base steel as per IS 513 of - 0.58 mm thick \"D\" quality galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 micrones thick, finishpainted with a polyester paint of 12 -16 microns thick and backcoated with 5-7 microns thick alkyd backer, section for outer frame should be of 72 x 55 mm, centre mullion should beof 72 x 50 mm section for fixed glass beading should be of 12 x 12 mm and section for shutter should be 52 x 25 mm outer frame and mullion section to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bas/grills fly mesh outer section should beof 20 x 40 mm. The Section are to be cut to length mitre joint with corner bracket, centre mullion to be fixed with mullion cap, Elixir or equivalant stay, handle 02 nos of heavy duty stainless steel piviot hinges shall be providedper shutter. The window should be panelled with 5 mm thick plain float glass and S.S mesh for fly mesh shutter ( 304 grade) Rubber gasketare provided all around the glass The above frames should be fixed to the concrete/ masonary wall by means of self expanding screws, including 10 mm square guardbars with 6\" (152.4 mm) pitch, complete for finished item of work including taking down of old steel ventilator etc. complete all as specified and as directed by the Engr-in-Charge.
23	S&F of fixed Louvered ventilators made of pre-painted steel (base steel as per IS 513 of - 0.58 mm thick \"D\" quality galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 micrones thick, finishpainted with a polyester paint of 12-16 microne thick and backcoated with 5-7 microns thick alkyd backer. The section for louvered ventilators should be of 33 x 56 mm box section panelled with 4 mm pinshed glass with Eyhyl propylene Diamine monomer Gasket (EDPM) and the section cut to length mitre jointed with corner braket. Corner bracket made of CRCA with Zinc phosphate. The frames to be fixed to the concrete/masonary wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work including taking down of old steel ventilator etc. complete all as specified and as directed by the Engr-in-Charge.
24	M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.complete all as specified and as directed by the Engr-in-Charge.
25	S&F for stainless steel wire cloth 0.36 mm nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.
26	S&F pre - painted galvalume aluminum zinc coating GI based corrugated/ semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
27	S&F steel work inTrusses, purlins, posts and the like using tubular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming I.S.1161-2014/ IS 4923-1977 grade St-240 and painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed by the Engr-in-Charge.
28	Cutting holes in brick walls built in cement mortar for inserting hold fasts & making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1, depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick complete all as specified and as directed
29	Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete, all as specified and directed
30	Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards /slabs/ blankets any thickness including cover fillets complete all as specified and directed.
31	S&F for 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber /GI/Aluminium framework with screws complete all as specified and directed.
32	S&F for powder coated aliminium snap grid frame work for false ceiling for size of grid 605 x 605 mm confirming IS:733, 737 & IS:1285 ;Hangers 6 mm dia. G.I. adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longand expansion hold fasteners 12.5,mm dia. 40,mm long complete, all as specified and directed.
33	Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
34	M&L for RCC type B1 (1:2:4) using 20 mm graded aggregate in fins, fascias, louvres, parapets and railings, manhole cover, newels, balustrade, beam, column, roof landing etc. & the like complete, all as specified and directed
35	Formwork to fins, louvers, fascia, column, beam, slab roof, railing etc. rough finished surfaces of concrete flat complete, all as specified and directed.
36	M&L for Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups spacers and binders and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all as specified and directed
37	S&F for Mild steel TMT bar 10 mm dia and over in manholes/rungs/beam/column, cut to length, bent to shape required, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all as specified and directed
38	Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 Sq.meach complete, all as specified and directed by Engineer-in-Charge.
39	M & L for providing & fixing factory made solid PVC cup board frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gaugethickness throughout the frame and metre cut at two cornersand jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minium 4 nos of screws to be provided for each vertical memberand minium 2 nos of screws to be provided to the horizontal mmember etc., complete all as per specified and as directed by Engineer-in-charge.
40	S&F factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete, as per specification & shown on drawing of MES SSR Part-I, 2009 and as directed.
41	S&F for 100 mm butt hinges of stainless steel medium weight cold rolled complete all as specified and directed.
42	S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete, all as specified and directed.
43	S&F Aluminium anodized handles, D type, 125 mm long complete, all as specified and as directed
44	Taking down chowkets or frame with shutter (without taking off shutters from the frame) exe 1.5 sqmn.exe 4 sqm each.complete all as specified and as directed by Engr-in-Charge.
45	S&F for pressed steel frames of size 125 x 60 mm for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming & finishing of disturb surfaces of wallcomplete all as specified and directed.
46	S&F for pressed steel frames of size 105 x 60 mm for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming & finishing of disturb surfaces of wall complete all as specified and directed.
47	M&L for PCC type C-1 (1:3:6) (using 20 mm graded aggregates) as in bedblock for fixing holdfast block, coping etc. filing concrete in frame, filling gaps in between glazed &flyproof steel window, cills, railing up to 60 cm in height including necessary formwork complete all as specified and as directed by Engr-in-Charge.
48	S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
49	S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws complete, all as specified and directed.
50	S&F Aluminium alloy anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete, all as specified and directed.
51	S&F of 35 mm thick 2nd class hardwood, plain, framed, factory made panelled shutter (two panel) with panel of timber flat on both sides (feather edged), or of veneered particle board with comercial face veneers, supplied and fitted to chowkats all as specified and as directed.
52	S&F 35 mm thick 2nd class hardwood glazed skelton shutter open rebated and prepaid to receive glass gauze extra (without sash bar), edges of plain, chamfered or roundedfitted with cut and mitred beads for secuering glass excecter size of members of shutter including bidding to frame as specified in SSR part-I, sec 8 clause 8.20(a) complete, all as specified and directed.
53	Taking down cement plaster on wall & ceiling of any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.
54	M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in two layers (10 mm + 5 mm) in cement mortar 1:4 using water proofing compound in top layer 200 ml per bag or as per manufacturer instructions for finished even and smooth without using extra cement complete, all as specified and as directed.(NOTE : WPC shall be measured and paid under relivent item.)
55	M&L Rendering 5 mm thick cement plaster as in ceiling/facia/chhaja in cement mortar 1:3 for finished even and smooth (without using extra cement) including taking down plaster complete, all as specified and as directed.
56	M&L Rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar 1:6 for finished even and fair (without using extra cement) complete, all as specified and as directed.
57	Supply only liquid WPC conforming to IS: 2645 - 1975, 200 ml per beg of cement or as per manufacturer\"s instructions complete, all as specified and as directed.
58	M&L for preparation of newly plasterd surface and applying two coats acrylic smooth exterior antifunagal paint of shade as approved by GE over a coat of cement primer finished surfaces over wall care putty as requiredof wall complete all as specified and as directed by the Engr-in-Charge and as per the manufacture\"s instructions. Note : 1. Application of new finished to be carried out mechanically by authorized applicator and as per the manufacturer’s instructions.2. Application of putty and preparation of surface to receive the distemper shall be measured and paid separately under relevant item of this schedule.
59	M&L for complete removal of existing treatment of walland applying two coats acrylic smooth exterior antifungal paint of shade as approved by GE over a coat of primerfinished surfaces over wall care putty as required of wall complete all as specified and as directed by the Engr-in-Charge and as per the manufacture\"s instructions. Note : 1. Application of new finished to be carried out mechanically by authorized applicator and as per the manufacturer’s instructions.2. Application of putty and preparation of surface to receive the distemper shall be measured and paid separately under relevant item of this schedule.
60	M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash as in ceiling complete, all as specified and directed.
61	M&L preparation and complete removal of existing treatmentof oldplaster surface and applying three coats of white wash on ceiling complete, all as specified and as directed.
62	M&L for prepartion of oldplasteredsurfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.
63	M&L for prepartion of newly plasteredsurfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting to wall surface complete all as specified and directed.
64	S&F of Welded steel wire fabric of weight n.exc 4 kg per Sqmsupplied and fixed complete to steel members all as specified and directed.
65	M&L for preparation of new of previously untreated steel and iron surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
66	M&L for preparation of new or previously undecorated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
67	M&L for preparation of old painted iron surfaces and applying one coat of synthetic enamel paint on steel surface of any description, not otherwise described over 10 cm width or girthand complete, all as specified and directed.
68	M&L for preparation of old or previously undecorated wooden surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
69	Taking up or down GI 15 mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and directed.
70	Taking up or down GI 20 mm steel tubing and connections incl cleaning for refixing or removal to store complete all as specified and directed.
71	S&F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling or laying in floors inbore of pipe outer diameter 20 mm complete all as specified and directed by Engr-in-Chrge
72	S&F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling or laying in floors inbore of pipe outer diameter 25 mm complete all as specified and directed by Engr-in-Chrge
73	Cutting chases pinning in, making good to facing where required and pointing in cement mortar 1:3 for cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and directed by Engr-in-Chrge
74	Demolition of brick work built in cement mortar including all quions, arches, pillars etc. of any description complete all as specified and directed.
75	M&L for Old size Brickwork with fly ash bricks straight or curved on plan exc 6 mmean radius built in CM 1:4 complete all as specified and directed.
76	Dismantling water tanksof capacity exc 500 but not n.exc 1000 ltrs complete all as specified and directed.
77	S&F 1000 ltrs capacity, multi layered, rotational moulded polyethylene water storage tanks white coloured, ISI marked, (cylindrical vertical with closed top) including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in MES SSR Part-I complete, all as specified and directed.
78	S&F in repairs for 20 mm dia PVC ball cock (PVC float valves) high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required using reducer and check nut complete all as specified and directed.
79	S&F in repairs Bib taps long body fancy type cast copper alloy, chromium plated for 15 mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified and dierected.
80	S&F in repair concealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15 mm pipe complete all as specified and directed.
81	S&F in repair 75 mm dia swivel shower of brass CP with shower arm 150 mm long for fixing with 15 mm bore GI pipe complete all as specified and directed
82	S&F ceramic undercounter wash hand Basin Glossy finishes, size 22 x 16 x 8 inch size including CP waste coupling, PVC connection 450 mm long, waste pipe and removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and directed
83	S&F in repair 15 mm fancy type swan neck pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed.
84	S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board or PVC board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
85	S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rest (excuding flushing cistern and flush pipe) with \"P\" or \"S\" trap from or back inlet including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified and directed.
86	S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) P or S trap including seat cover white closed type complete all as specified and directed
87	S&F of PVC water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed
88	S&F of in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection 450 mm long, PVC flush pipe of recd length etc. complete all as specified and directed
89	S&F of vitreous China Urinal, Half stall type, whiteincluding providing and fixing plugsbedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement incluiding waste pipe complete all as specified and directed
90	S&F in repair 15 mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and directed.
91	S&F of in repairs for sinks with drainage board made of stainless steel 1 mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x160 mm complete all as specified and directed.
92	S&F of in repair 15 mm dia brass chromium plated angle cock with flange complete all as specified and directed.
93	S&F for brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
94	S&F in repair cp towel ring complete all as specified and directed.
95	S&F in repair stainless steelchromium plated curtain rod of 25 mm dia with fixing brackets etc. complete all as specified and directed.
96	S&F in repair 1.00 mm thick stainless steel plate rack of size 31\"x30\"x10\" complete all as specified and directed.
97	S&F of wall mounted soap dish of stainless steel fixed to plugs with chromium plated brass screws complete, all as specified and directed.
98	S&F in repair for CP health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
99	S&F in repair for 75 mm bore PVC (SWR) floor trap, plain with grating (with or without hole) including jointing with solvent cement complete all as specified and directed.
100	Taking down eaves gutters and rainwater drain pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete, all as specified and directed.
101	S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps and bolts etc complete all as specified and directed.
102	S&F for 75/110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps and bolts etclaid in trenches or in floors etc complete all as specified and directed.
103	S&F for 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed.
104	S&F for 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door complete all as specified and directed.
105	S&F for 110 mm bore PVC (SWR) branch piece single (single \"Y\") equal or unequal with access door complete all as specified and directed.
106	S&F in repair for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard and railing 60 cm long complete all as specified and directed.
107	Taking down tar felt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50 m and n. exc. 100 m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and directed .
108	M&L for coloured non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
109	Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and applying neat cement slurry with 3.0kg of cement per sq. m complete, all as specified and directed.
110	M&L for machine cutKota stone slab 20-25 mm thick for staircase steps in single piece (of length not more than 1200mm), laid over & including 15 mm thick (average thickness ) cement morter (1:6) screed and jointed with grey cement slurry complete, all as specified and directed.
111	M&L for machine cut kota stone slab 15-20 mm thick on vertical surfaces like riser of steps, skirting, in single piece (of length not more than 1200 mm) over & including 15 mm thick (average thickness) cement mortar (1:4) screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and as directed.
112	M&L for machine cut pre polished Kota stone as in riser / skirting 15-20mm thick over 15 mm thick rendering using cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing polishing complete all as specified and as directed.
113	M&L for non skid ceramic colouredtiles 7 to 8mm thick (square/ rectangular) polished, area of each tiles not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurryover 15 mm thick screed bed or bedding layer in cement mortar (1:6) as in floor and pointed in white or coloured cement to match as in floor complete all as specified and directed.complete all as specified and as directed.
114	M&L forpreparation of newly plasterd surfaceapplying two coats oil bound distemper of shade as approved by GE over a coat of primer over 3mm thick wall care putty finished surfaces of wall complete all as specified and as directed by the Engr-in-Charge and as per the manufacture\"s instructions. Note : 1. Application of new finished to be carried out mechanically by authorized applicator and as per the manufacturer’s instructions.2. Application of putty and preparation of surface to receive the distemper shall be measured and paid separately under relevant item of this schedule.
115	M&L for applying two coats oil bound distemper of shade as approved by GE over a coat of primer over finished putty surfaces of wall complete all as specified and as directed by the Eng-in-Charge and as per the manufacturer\"s instructions.Note:1. Application of new finishes to be carried out mechanically by authorised applicator and as per the manufacturer\"s instructions.2. Application of putty and preparation of surface to receive the distemper shall be measured and paid separately under relevant item of this schedule.
116	M&L for preparation of new plastered surfaces and applying three coats of white wash as on walls complete, all as specified and directed.
117	M&L for one coat of white wash on old plastered ceiling surface including brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots complete all as specified and directed.
118	Taking down shutter of any discription exc. 1 sqm but n. exc 2 sqm each & refixing of shutter in same opening including easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.
119	M&L for preparation of surfaces of wood and wood based materials steel and iron work new or old, of any description and girth not otherwise described, and treated with tar or coal tar black paint to the treating ends of posts back of chowkats etc complete, all as specified and directed.
120	S&F of factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/ chowkhat of size 45x85 mm coprising of virgin PVC polymer of K value 58-60 (Suspension Grade) , calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) Minimum compressive strength of 58 N/mm2 , modules of eleasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasterners of required dia and lenght complete as per direction fo Engineer-In-Charge (M.S. hold fast/lugs or SS dash fasteners shall be paid for separaterly), complete all as specified and as directed by Engineer-in-charge.Note : For WPC solid door/ window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus sides shall be acceptable but no extra payment on this account shall be made
121	M & L for providing & fixing factory made solid PVC cup board shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardantand having good screw holding capacity, complete all as per specified and as directed by Engineer-in-charge.
122	S&F of 150 mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as per specified and as directed by Engineer-in-charge.
123	S&F Aluminium anodised barrel tower bolts of extruded section 75 mm long and fixed with screws complete, all as specified and directed.
124	S&F of 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
125	S&F of factory made solid panel factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as per specified and as directed by Engineer-in-charge.
126	Dismantling of steel window and ventilator of any description and size including grill/guard bar complete all as specified and directed.
127	S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers, MS guard bar/grill etc complete including one shop coat of anti corrosive zinc chrome primer complete all as specified and as directed.Notes:- (a)Rate quoted shall be deemed to be including of all fittings fixtures . (b)Glass, wire mesh and painting shall be measured and paid separately under relevant items of this schedule.(c)PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of schedule.
128	S&F of steel ventilators, with top hung shutters including hinges steel peg stay etc. with glazing bars including one shop coat zinc chromate primer complete all as specified and as directed.
129	M&L for mild steel framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe 290 (Gde-E-165) including one shop caot of zinc chromate primer complete all as specified and as directed.
130	Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
131	M&L for framed work as in doors or gates of angles or orther section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering viz. doors etc to be prepared for hangng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.
132	M&L for cleaning & washing of pre-primed steel and iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (1st quality) complete all as specified and directed.
133	Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
134	S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pan complete all as specified and directed.
135	S&F frostred glass pin head type 4 mm thick in saures n.exc 0.5 Sqm in each pan complete all as specified and directed.
136	S&F in repair for stainless steel wire cloth 0.36 mm nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.
137	S&F looking mirror of size 1.80 m x 0.60 m with wooden frame work of 75 mm x 40 mm size styles and rails offirst class hard wood duly polished and 6 mm thick ply wood exterior grade on the back side fixed to wall with necessary hooks etc complete all as specified and as directed
138	Taking up or down GI 15 mm steel tubing and connections incl cleaning for refixing or removal to store complete all as specified and directed.
139	Demolition of RCC overhead tank and similar items complete all as specified and directed.
140	Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.
141	S&F of ball valves of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron & fixed (Minimum weight 20 gms - 210 gms) complete all as specified and directed.
142	S&F for in repair 15 mm fancy type chromium plated bip tap brass short body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15 mm bore pipe or union complete all as specified and directed
143	S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
144	S&F of in repair of chromium plated shower roses with or without swivel joints of any cells including fixing to steel pipe or union complete all as specified and directed
145	S&F ceramic undercounter wash hand Basin Glossy finishes, size 22 x 16 x 8 inch size including CP waste coupling, PVC connection 450 mm long, waste pipe and removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and directed
146	S&F of in repair vitreous china half stall type urinal with greting and union for disharge pipe including connection pipe and waste pipe with coupling, urinal spreader complete all as specified and directed
147	S&F in repairs stainless steel sink of customized size 114\"\" x 24\" x 22\" made of 1 mm thick SS sheet complete all as specified and directed
148	S&F in repair Towel rail 450 mm long Chromium platedfixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms) complete all as specified and directed
149	S&F in repair stainless steel towel ring including chromium plated brass screws and wooden plastic cleats. complete all as specified and directed.
150	S&F of aluminium hat pegs, solid body,125mm to 175mm complete all as specified and directed
151	M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, corner shelf, flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
152	S&F for 75/110 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
153	Taking down old unserviceable PVC pipe including all fittings complete all as specified and directed
154	S&F of Welded steel wire fabric of weight n.exc 4 kg per Sqmsupplied and fixed complete to steel members all as specified and directed.
155	S&F pre - painted galvalume aluminum zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws complete all as specified and directed
156	M&L for Old size Brickwork with fly ash bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 complete all as specified and directed.
157	M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in Cement mortar (1:4) complete all as specified and directed
158	Demilition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
159	M&L for PCC type B-1, 1:2:4 (using20 mm graded crushed stone aggregates) as in coping/benching to sides of foot path finished fair and even etc complete all as specified and as directed by Engineer-in-charge.
160	S&F of 0.56 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in crumple joint (length and girth as fixed) complete all as specified and directed
161	S&F 25 mm thick pre-formed fill up for expansion / crumple joints fixed complete all as specified and directed
162	M&L for Post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre or as per manufacturer\"s instruction including drilling and plugging holes etc. in apron complete all as specified and directed
163	M&L for Post construction ATT of soil under existing floors using emulsion @ 1 litre per hole or as per manufacturer\"s instruction, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar (1:2) to match the existing floors complete all as specified and directed
164	M&L for Crack Sealing : Identify the cracks and construction joints, honeycomb areas, shall be chased open into ‘U’ groove shape and sealed with High strength, abrasion - resistance epoxy reinstatement mortar, Fosroc Nitomortar S or Equivalent, including providing and fixing 6-8mm dia nozzle along the joints and honeycomb areas after proper surface preparation. The injection of Conbextra EP10 or Equivalent through the nozzle till the refusal of the grouting materials complete, all as specified and directed.
165	M&L for 25 mm thick( Average thickness) Guniting concrete surface using mechanical means with single component, shrinkage controlled, polymer modified, fibre reinforced structural grade cementitious repair mortar having compressive strength of 45 N/ Sq.mm , Flexural strength of 7 N/Sq.mm and tensile strength of 2.50 N/sq.mm at 28 Days all as per manufacturer\"s recommendation and technical specification and as per the direction of Engr-in-Charge including standard steel scaffolding upto a height of 7 M .Note : The above treatment will be done in presence of company authorised person and also company skilled workers complete, all as specified and directed.Make of single component, shrinkage controlled, polymer modified, fibre reinforced structural grade cementitious repair mortar : Renderoc SP 40 from FOSROC or EquivalentM/s SIKA, M/s Pidilite etc.
166	M&L for providing and laying of ready to use non shrink ,cementitious free flow micro concrete, upto required thickness at the designated areas, to the prepared slurry tight shuttering with proper shear connectors and bonding agent where ever necessary .The fluid Micro-concrete repair material shall be single component , cement based to which only site condition of water and approved graded coarse aggregate where ever specified shall be permitted . The micro concrete shall contain no mettalic aggregates or chlorides and shall be shrinkage compensated in the plastic state. The micro concrete in the flowable consistancy should achieve a compressive strength of 50 N/ Sq.mm after 28 days at 30 degrees Centigrate as per BIS 4551-80.The unrestrained expansion shall be between 1-4 % as per ASTM C827 -1987. Again as per BS 4551-80 the flexural strength shall not be less than 5 N/ Sq.mm @ 28 days. The Micro Concrte shall have a coefficient of thermal expansion 10-12 x 10 -6 /oC and thermal conductivity 1.50 W /moC . The mixed density of micro concrete shall exceed 2100-2200 Kg/Cu.M 227oC including standard steel scaffolding upto a height of 7.00m complete, all as specified and directed.Note : The above treatment will be done in presence of company authorised person and also comapany skilled workers. Make of non shrink ,cementitious free flow micro concrete micro concrete :- Renderoc RG of FOSROC or Equivalent of M/s SIKA, M/s Pidilite etc.
167	Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
168	M&L for point wiring for One light point controlled by one way switch 5/6 amps with 1.5 sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB\"s or bus bar shall be done through proper size copper/brass thimbles complete all as specified and directed.Notes :(1)Item Continued as Ser. Item No. 169 to Ser. Item No. 173. (2) Quoted rate shall be include chase cutting, making good to the disturbed surfaces including plastering and paintingto match with the existing colour.
169	All as per item no. 168 here in before but for One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified and directed.
170	All as per item no. 168 here in before but for One socket out let 5/6 amps point on the independent board complete all as specified and directed.
171	All as per item no. 168 here in before but for One socket out let 5/6 amps point on the same board complete all as specified and directed.
172	All as per item no. 168 here in before but for One light point controlled by two way switch 5/6 amps complete all as specified and directed.
173	All as per item no. 168 above but wiring with 2.5 sq mm single coremultistranded copper conductorincluding provision of 2.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LS (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly , for one socket out let 15/16 amps point on the independent board complete all as specified and directed
174	S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.
175	S&F of Modular switch, single pole, Two way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.
176	S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and directed.
177	S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and directed.
178	S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and directed.
179	S&F of stepped type (five step) modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and directed.
180	S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.
181	S&F LED white glass Lamp 1 x 9 Watt 230V Base-22 complete all as specified and directed.
182	S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
183	S&F Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
184	S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4 feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc with all accessories internally prewired and connecting up complete all as specified and directed.
185	S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
186	S&F of Bulk head luminaire with B22 base holder suitable for 9 WattLED inverter type bulblight IP66 grade,with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting complete all as specified and directed.
187	S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and directed.
188	Taking down carefully Ceiling fan from its original position and refixing / hanging afterplaster work complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust incl provisining of 3 core copper conductor of size .075 mmetc complete all as specified and directed.
189	M&L for painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust including writing MES no. etc complete all as specified and directed.
190	S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with Brushless Direct Current motor (BLDC)complete all as specified and directed.
191	Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified and directed. NOTE : (1) Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles.(2) Rate for taking down old unsv aluminium submain wiring deemed to be included in the quotated rate.
192	S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB\"S/lsolators with and including taking down old one complete all as specified and directed.
193	S&F of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 160 Amps of breaking capacity 36 KA Ics=100 of Icu complete all as specified and as directed
194	S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surfaceincluding taking down old one complete all as specified and as directed.
195	S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old one complete all as specified and as directed.
196	S&F MCB, Triple pole & neutral 63 amps, 415 volts, ‘C’ curve, 10KAcomplete all as specified and as directed.
197	S&F for MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and directed.
198	S&F for MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and directed.
199	M&L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and directed.
200	Material and labour for earthing complete with galvanized steel plate electrodes of size 600 x 600 x 6 mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion complete all as specified and directed.
201	S&F for heavy duty exhaust fan 300 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing, 900 RPM, single phase 230/240 volts copper wounds, Air delivery -1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme complete all as specified and directed.
202	S&F for heavy duty exhaust fan 450 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing, 900 RPM, single phase 230/240 volts copper wounds, Air delivery - 1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe including cutting holes and making good the disturbed surfaces of walls in CM (1:4) and finishing the surface as per existing color scheme complete all as specified and directed.
203	S&F SS Wall Mounted Chimney hood with SS Filter of size 89\"(L)(7.42\") x 36\"(W) x18\" (H) to dischargeout hot gases to the atmosphere all as specified & directed
204	M&L for ducting with insulation for dichaging out exhaust gases from the chimney to the atmosphere all as specified & directed
205	S & F Axial fan Drive with direct blade connected with 2 HP motor with all accessories complete all as specified & directed
206	S & F DOL Stater for Axial fan Drive with direct blade connected with 2 HP motor relay range 2.4 to 3.8 Amp with all accessories complete all as specified & directed
207	Material and labour for concealed sub-main wiring alongwith earth wire of size of 4 x 4.0 sq. mm + 2 x 4.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified and directed. NOTE : (1) Four runs of 4 sqmm conductor for main and two run of 4 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles.(2) Rate for taking down old unsv aluminium submain wiring deemed to be included in the quotated rate.
208	M&L for point wiring complete for one power point for one metal plug & socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and directed.Notes : (1) Quoted rate shall be include chase cutting, making good to the disturbed surfaces including plastering and paintingto match with the existing colour.
209	S&F in repairs Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, Triple pole & neutral with din rail (as per OEM), 415Volt IP-20 protection suitable for fixing MCB\"S/lsolators with and including taking down old one complete all as specified and directed.
210	S&F MCB, Triple pole & neutral 100 amps, 415 volts, ‘C’ curve, 10KAcomplete all as specified and as directed.
211	Taking down and refixing only exhaust fan of any size after necessary B&R work and connecting up including provision of cable from ceilling rose/connector to fan complete all as specified and as directed
212	Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 lts capacity 230 volts AC 50 Hz comprising of high wattage heating element upto 2 KW for instant heating dust & shock proof ABS outer body, non-ferrous, pressure plate with and including provision of 04 nos grouting bolts suitably flush to wall with all accessories such as safety valve, thermostate,NRV, connection pipe all as specified and as directed.
213	M&L for GI water tubing medium grade 15 mm dia fixed on wall with all fittings and fixtures complete and cutting existing GI pipe alteration or addition of upto 25 mm dia bore for insertion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge.
214	S&F stop valve but fancy type, chromium plated, screwed down (CP) of size15 mmfancy type complete all as specified and directed.
215	M&L bib taps , cast copper alloy with butterfly handle , screwed down, screwed for iron pipe or for brass ferrule and fixed for bib tap 15 mm dia fancy type all as specified and as directed.
216	Taking down electric water heater (deposit to MES store) and refixing the same after necessary B/R plaster work with new holes fasteners complete all as specified and as directed.
217	M&L for applying average 15 mm thick plaster in two coats (10 + 5 mm) with ready mix prepacked proportioned dry mix mortar blended with PP fibres mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces addiditives on external surfaces including transporting of materials mixing curing scaffolding etc complete all as specified and as directed by Engineer-in-Charge
218	M&L for preparing of new/old plastered surfaces of wall (internal & external) and applying 2 mm thick two coat of cement based wall care putty including preparation of surface to receive finishes (primer, distemper, paint etc) complete all as specified and as directed by Engineer-in-Charge and as per manufacturer\"s instructionNote : Preparation of new plastered surface and application of wall care putty to be carried out mechanically by authorised applicator and as per manufacturer\"s instruction.
219	M&L for 25 mm thick pre-polished and chemically treated anti skid exterior grade coloured chequered tile as in path with grey cement and pigments including 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. Note:- Design/pattern shall be as approved by GE at the time of execution.
220	Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick comnpacted bed of fine sand, compcting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plkate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per specified and as directed by Engineer-in-Charge.
221	M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete of in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
222	Demolition of Reinforced cement concrete of roofs, floors (other than ground floors), beams, staircase, landings, chajjas, facia and similar suspended work complete all as specified and directed.
223	M&L for RCC 1:1.5:3 type A1 (using 20mm graded crushed stone aggregate) as in chajjas, beam, Column, roof, landing, shelf, platform, facia and like complete all as specified and directed.
224	Form work to chajjas, facia, Shelf, roof, landing and like for rough finished surface of concrete flat complete all as specified and directed.
225	M&L for mild steel TMT bars 6 mm to 8 mm dia cut to length , bent to shape required,including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip. complete all as specified and directed.
226	M&L for machine pressed, pre-polished and chemically treated, smooth finished, exterior graded coloured cement concrete. Chequered tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floorsover and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
227	Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2 TR complete all as specified and as directed.
228	Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.
229	Supply and fixing wall mounted bracket for outdoor AC unit complete all as specified and directed.
230	M&L for point wiring complete for one power point for one metal plug & socket for AC point on independent board with 4.0 sqmm multistranded copper conductor single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non metallic rigid PVC medium grade conduit not less than 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.00 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fisxing for metal plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and directed.
231	S & F epoxy powder coated sheet metal encloser with socket plug top & MCB, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps ,240 Volts, \"C\" series current carrying capacity 10 KA, including necessary connection complete all as specified and directed.
232	Taking out old unserviceable GI Pipe of any size from site complete all as specified and as directed. Note :The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule.
233	Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engineer-in-charge.
234	Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm complete all as specified and directed by Engineer-in-charge.
235	Supply and lay pipe galvanized, “Medium class”, including fittings 40 mm complete all as specified and directed by Engineer-in-charge.
236	Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm complete all as specified and directed by Engineer-in-charge.
237	Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
238	Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
239	Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 40 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
240	Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 50 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
241	M&L for construction of brick masonary valves pit of internal dimensins 600 mm x 600 mm x 600 mm complete with brick work in cement mortar (1:4) including exvacation and earth work, concrete work and fabrication of 3.0 mm thick MS sheet cover and angle iron frame made out of 40 mm x 40 mm x 6mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as specified and as directed
242	M& L for cutting existing GI pipe alteration or addition of upto 100 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge.
243	Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / layingunder ground electric cable complete with all accessories all as specified and as directed.
244	Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
245	Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete with all accessories all as specified and as directed.
246	Taking out old unserviceable cable of any size carefully from trenches ofter disconnecting electric connection, GI pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note :The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule.
247	Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulatedPVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 50 sqmm 3.5 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed.(NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule \"A\").
248	Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.
249	Supply and laying sub class B bricks of size 23cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
250	M & L for horizontal boring across the existing road without disturbing the road surface for insertingGI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch \"A\".
251	M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed.
252	Supply and fixing ofmoulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 200 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.
253	Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulatedPVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 70 sqmm 3.5 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Kable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule \"A\").
254	Supply and fixing ofmoulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 250 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.
255	M&L for precast RCC 1: 2 :4 type B-1 using 20 mm graded aggregate set in cement mortar 1:4 as in manhole covers including necessary formwork complete all as specified and as directed
256	M&L for reinforced concrete drain pipes of 450 mm bore, class NP2, laid in trenches and jointed with collor complete all as specified and directed.
257	M&L for concrete bed for sewer line packing under and haunching against the sides of the new pipes with PCC (1:3:6) type C-2 with (using 40 mm graded crushed stone aggregates) for the 100 mm dia (Internal) of sewer pipe lines complete all as specified and directed.
258	M&L PCC 1:3:6 type C-2 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed
259	M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
260	M&L for rendering 20 mm thick in cement mortar 1:4 on other than fair faces of brick or concrete surface finished even and smooth with using extra cement complete all as specified and directed.
261	M&L PCC 1:3:6 type C-2 concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested dia of pipe 150 mm complete all as specified and directed
262	M&L for DWC HDPE ( Double wall corrugated High density polyethene ) pipe for 150 mm bore pipe BSL-16098 ( Part-II) 2013 laid and jointed complete with collers, laid and jointed on concrete bed complete in cluding testing complete all as specified and directed
263	S&F of salt glazed stone ware drain pope grade A placed in position in old sewar line and jointed in cement mortor 1:1 100 mm dia (internal) of sewer pipelines complete all as specified and directed.
264	M&L cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required dia of pipe 150 mm complete all as specified and directed.
265	M&L for brickwork with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
266	Ditto all as item no 265 but except bricks complete all as specified and directed
267	M&L for TMT bars 8 mm dia and over, cut to length , bent to shape required, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
268	Demolition & breaking up drain pipes( salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm complete all as specified and directed.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Addition / Alteration And Special Repairs To Certain Otm Accn At Binnaguri Mil Station Under Ge (N) Binnaguri And Ge (S) Binnaguri, Binnaguri-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Addition / Alteration And Special Repairs To Certain Otm Accn At Binnaguri Mil Station Under Ge (N) Binnaguri And Ge (S) Binnaguri, Binnaguri-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us