|
| 1 | B/R:- Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 2 | 5mm thick cement plaster rendering in CM 1:3 on fair faces of concrete surfaces & finishing the surface even and smoothin ceiling, chajja in doublestorey building etc without using extra cement,complete all as specified and directed. |
| 3 | 15mm thick rendering in CM 1:4 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement including mixing of water proofing compound in proportion as per manufa\"s instructions, complete all as specified and directed. Note:- Supply only WPC shall be measured and paid separately |
| 4 | 15mm thick rendering in CM 1:6 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | 15mm thick rendering on stone masonary or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:6 , complete all as specified and directed. |
| 6 | 15mm thick rendering on stone masonary or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:4 , complete all as specified and directed. |
| 7 | Preparation of new plastered surface of Wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 8 | Complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 9 | Preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed |
| 10 | Complete Removal of existing treatment and preparing of plastered or unplastered surfaces of walls and applying two coats of oil emulsion distempercomplete all as specified and directed |
| 11 | Preparation of newly plastered surfaces and applying three coats of white wash on ceiling sufraces complete all as specified and directed. |
| 12 | Preparation of old plastered surfaces and applying two coats of white wash on ceiling sufraces complete all as specified and directed. |
| 13 | Preparation of new or previously untreated surfaces of wood over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 14 | Preparation of new or previously untreated steel or iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 15 | Preparation of old painted steel or iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | Demolition of brick work or stone /boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 17 | Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed |
| 18 | Demolition of cement concrete (unreinforced) as in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 20 | Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and directed. |
| 21 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 22 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18Sqm but n exc. 0.38Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 23 | Glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18Sqm but n exc. 0.38Sqm in floors etc. as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 24 | Glazed ceramic coloured tiles 350x250mm /450mmx350mm x7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thickrendering in cement mortar 1:3, complete all as specified and directed by Engr-In-Charge. |
| 25 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in levelling course to floor surface, finishing surface even and fair, complete all as specified. |
| 26 | 75mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 27 | Machine cut pre polished kota stone slab flooring 18-20mm thick bedded and jointed with grey cement sluury mixed with pigment to match the shade of the kota stone slab as approved by GE, laid over and including a screed bed of 20mm thick in cement mortar 1:4 including cutting, grinding and mirror polishing, complete all as specified and directed. |
| 28 | Machine cut pre polished Kota stone 18-20mm thick as in riser of steps, skirting, dado and pillar fixed over & including cement plaster 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment tomatch the shade of the kota stone including rubbing and polishing including taking down old cement plaster on brick of stone wall, complete all as specified. |
| 29 | Floor grinding and polishing granite finish to existing kota stone floors including necessary repairs if reqd after each cuttinng i.e filling of joints with white cement, araldite and pigments complete all as specified and directed by GE. |
| 30 | Floor grinding and polishing granite finish to existing kota stone in vertical surfaces including necessary repairs if required after each cuttinng i.e filling of joints with white cement, araldite and pigments complete all as specified and directed by GE. |
| 31 | Taking down chowkhats or framesexc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from frame)complete all as specified and directed |
| 32 | Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 33 | Taking down shutters of any description exc 2.0 sqmm each complete all as specified and directed. |
| 34 | Factory made single extruded WPC (Wood Polymer Composite) solid door &other Frames / Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 35 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 36 | 35mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR PART I section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated , supplied & fitted to chowkats complete all as specified and directed. |
| 37 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 38 | Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, \"C\" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 39 | Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified and directed. |
| 40 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 41 | Aluminium anodised, barrel tower bolts of extruded section of size 100mm and fixed, complete all as specified and directed. |
| 42 | Aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 43 | Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed. |
| 44 | 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 45 | 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 46 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 47 | Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 48 | Repairs to old steel windows/ventilator any size for easing to opening of shutters, fixing hinges,handle,tower bolt etc with welding inlcuding cleaning, take down and refixing in same opening complete all as specified and directed. |
| 49 | Repairs to old panelled/wire gauzed shuttersfor ease to opening of shutters, fixing hinges,handle,tower bolt etc with screws includingtaking down and refixing in same opening complete all as specified and directed. |
| 50 | 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 51 | Supply and fixing in repairs 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 52 | Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples or wooden beading complete allas specified and directed. |
| 53 | Supply and fixing in repair Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples or wooden beading complete allas specified and directed. |
| 54 | Vitreous china wash down water closet pan (pedestal pattern), white with seat cover and hinging device including all fittings, fixing nut bolts, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc fixed in repair,complete all as specified and directed. |
| 55 | Supply and fixing in repair, Vitreous china wash basin, counter top, oval shape size 550 x 400 mm excluding taps, wastechain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified. |
| 56 | 15mm brass chromium plated basin mixerfor mixing hot & cold water screwed down for iron pipe fixed in repair, complete all as specified. |
| 57 | PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints fixed in repair , complete all as specified and directed. |
| 58 | 15mm bore Stop valve/angle cock, cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified. |
| 59 | 15mm bore Stop cock cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified. |
| 60 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 61 | PVC connection 15mm size with CP nuts on both ends of length 600mm fixed in repairs, complete all as specified and directed. |
| 62 | Grating doom 100 mm dia with waste hole of steel fixed in repair, suitable for floor taps, all as specified and directed. |
| 63 | Supply and fixing in repair 600mm x 450mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 64 | Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed |
| 65 | Soap dish of CP fixed with and including chromium plated brass screws and wooden/plastic plugs, fixed in repairs, all as specified and directed. |
| 66 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 67 | Tubular towel rail 60cm long 20mm dia aluminium anodised incl necessary brackets, fixed in repair, complete all as specified and directed. |
| 68 | Dismantling of cast iron drain pipe of any dia set in cement mortar/concrete and taking out of trenches if required, complete all as specifie and directed. |
| 69 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified. |
| 70 | PVC (SWR) pipes 75mm dia, Type B, any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 71 | PVC (SWR) pipes 75mm dia, Type B, any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 72 | PVC (SWR) pipes 110mm dia, Type B, any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 73 | PVC (SWR) pipes 110mm dia, Type B, any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 74 | PVC (SWR) bends any radius 75mm bore fixed, complete all as specified and directed. |
| 75 | PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed. |
| 76 | PVC(SWR) branch piece, single (single Y) equal or unequal 75mm bore fixed in repair, complete all as specified and directed. |
| 77 | PVC(SWR) branch piece, single (single Y) equal or unequal 110mm bore fixed in repair, complete all as specified and directed. |
| 78 | PVC (SWR) junction single (single T) 75mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 79 | PVC (SWR) junction single (single T) 110mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 80 | PVC (SWR) vent cowl for 75mm dia fixed in repair, all as specified and directed. |
| 81 | Dismantling water tanks of any description exc 500 & nexc1000 litre capacityand removing from site complete all as specified and directed. |
| 82 | Rotational moulded polyethylene water storage tankstriple layer (Cylindrical vertical with closed top), ISI marked hoisted and fixed in position all as spd in SSR Pt-I,of capacity1000 Ltrs including making necessary connection and fittings, complete all as specified and as directed. |
| 83 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed, complete all as specified and directed. |
| 84 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified. |
| 85 | Supply onlly liquid water proofing compound of Dr. Fixit or equivalent make complete all as specified and directed. |
| 86 | Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smoothusing water proofing compound @ 3% on sunken portion complete all as specified and directed(NOTE : Supply only water proofing compound shall be measured and paid separately). |
| 87 | Preparation of surface by brushuing and cleaned of all dust and applyingbituminous primer conforming to IS-3384 applied @0.7 litres per of wall and slab, after drying of primer apply evenly a coat of hot blown 85/25 gradebitumen at the rate of 1.20 kg per square metre, providing polymeric water proofing membrane ISI marked laid with over laps bonded with cold cut back adhesive, overlap shall not be less than 150mm, and over membrane applya coat ofsemi hot blown 85/25 gradebitumen at the rate of 1.20 kg per square metre on sunken portion including testing by ponding complete all as specified and directed. |
| 88 | 50 mm dia HDPE pipes as spout pipes in sunken portion complete all as specified and directed |
| 89 | Loose filling ofbrick bats 80 to 150 mm in sunken portion complete all as specified and directed |
| 90 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 91 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 92 | 16mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 93 | 20mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 94 | Steel water tubing of 25 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 95 | Taking down existing tarfelt including tiles and demolition of concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 50m and n. exc. 100m incl roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified & directed. |
| 96 | 40mm thick(minimum thickness)PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and finishing surface smooth and even to maintain levelling to existing slab complete all as specified and directed. |
| 97 | 15mm thick screed bed or bedding layers in cement mortar 1:4 over green surface of concrete on roof surfaces for laying APP based polymeric membrane including mixing with water proofing compound @ 3% or as per manufacturers instruction complete all as specified and as directed. NOTE : Polymeric membrane & Water proofing compound shall be measured and paid separately. |
| 98 | Water proofing treatrment to RCC roof slab, includingparapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bitumenous primer @ 0.4 ltrs per Sqmover plastered surfaces of roof including parapet surface.(b)Over the priming coat ,applying a tack coat of bitumen @ 1.2 kg/sqm of paving grade butumen Vg 20 (60-80 penetration) and providing APP based polymeric membrane minimum weighing 3.00 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 200 gms/sqm) laid on bitumen surface by forced application and inserting in groove above 15cm from roof in parapet including minimum overlap of 100mm and 75mm atend and sides of the polymeric membrane respectively and sealed all overlaps and joints with suitable adhesive as per manufacturer\"s instruction and including applying bitumen Vg20 paving grade (60 to 80 penetration) @1.20Kg/Sqm & blinded with fine dry sand @0.50Kg/Sqm including testing. (Note:- (i)Laying of APP bassed polymeric membrane shall bedone with torch application methed or as per manufacturer\"s instructions.(ii)APP based polymeric membrane shall be \"Dr Fixit\" manufacturered by M/S Pidilite Industriesor \"MOPLY FP 3MM\" manufactured by M/S Texsa India Limited and \"Hyperplus\" by IWL India Limited |
| 99 | Mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/or rivetted or forged into spikes; framed guard bars, and similar works, complete all as specfied and directed. |
| 100 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs |
| 101 | Rotational moulded polyethylene water storage tanks of capacity 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 102 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 103 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 104 | Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 105 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 106 | Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 107 | Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutterand similar worksfixed with self tapping screws complete all as specified and directed. |
| 108 | Dismantling mild steel work of any description complete all as specified and directed. |
| 109 | Rolled mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W (Gde E-250) complete all as specified and directed. |
| 110 | Two coats of synthetic enamel paint on new steel surfaces over 10 cms width or girth over a coat of red oxide primer complete all as specified and directed. |
| 111 | Preparation of old steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 112 | Complete removal of existing treatment on ceiling and preparation of old plastered surface and applying two coats of white wash on ceiling surfaces complete all as specified and directed. |
| 113 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed by Engineer-in-Charge. |
| 114 | Precast cement concrete type C1 1:3:6 (20mm aggregate) block masonary with solid blocks exc 10 cm in width set in cement mortar 1:6, complete all as specified and directed. |
| 115 | RCC (nominal mix) 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in beams , cantilevers, bressummers, lintel over 1.5 mtr span, complete all as specified and directed. |
| 116 | TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified. |
| 117 | TMT bars, 5mm dia and over upto incl 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified |
| 118 | 75mm thick PCC 1:4:8, type D-2 using 40mmgraded crushed stone aggregate as in sub base complete all as specified and directed. |
| 119 | 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rendering in 10 mm thick CM 1:4 complete all as specified and directed. |
| 120 | Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 03 Nos 25x25x3mm thick angle iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and holdfastscomplete all as specified & directed. |
| 121 | 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 122 | Factory made 30mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete, all as specified and directed. |
| 123 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed. |
| 124 | Dismantlingwall/ceiling board (fibre, pulp, insulation, etc) or insulation board, slabs/ blankets,of any thickness, including cover fillets complete all as specified and directed. |
| 125 | Dismantling timber scantling under 40 sqcm in section in any position, framed work in fillets, rails, posts, rafters, purlins etc complete all as specified and directed. |
| 126 | Suspended false ceiling using E- grid suspended ceilinggrid system of gridsize 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 0.5mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) & E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips, complete all as specified and directed.Make:- Everest Industries Ltd or equivalent as approved by GE. |
| 127 | Supply and fixing in repair powder coated aluminium work including 5.50mm thick glass sheet/prelaminated particle board with both sides decorative (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fastners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, CP brass/strainless steel screws, all complete all as per drawings and the direction of E-in-C. |
| 128 | E/M PORTION:-Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket,ceiling rose, celing fan etc and making good to disturbed surfaces of wall, floor etc to match with existing finishes complete all as specified and directed. |
| 129 | Point wiring with 2x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and 1x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of approporiate size and all requisite accessories such as PVC elbow, Tee, collars, bends etc with PVC terminals box& cover for mounting switches, sockets, fan regulator etc complete all as specified and as directed for the following:- |
| 130 | One light/fan point controlled by one switch complete all as specified and directed. |
| 131 | One 5 Pin, 6 amp socket outlet on same board complete all as specified and directed. |
| 132 | One 5 Pin, 6 amp socket outlet on independent board complete all as specified and directed. |
| 133 | One light point controlled by two numbers two way switches |
| 134 | All as per item No. 129 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 135 | Ceiling rose, 3 phase,bakelite 65x50mm two or three therminals complete all as specified and directed. |
| 136 | Piano Type switch , 1 way, 6 amp, flush type complete all as specified and directed. |
| 137 | Piano Type switch , two way, 6 amp, flush type complete all as specified and directed. |
| 138 | Socket outlet 2 in 1, 5 pin 6 Amps, flush type complete all as specified and directed. |
| 139 | Switch socket combination 2 in 1 , 5 pin 6 Amp, flush type complete all as specified and directed. |
| 140 | Switch socket combination 2 in 1 , 5 pin 6and 16 Amp, flush type complete all as specified and directed. |
| 141 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 142 | Invert Led Lamp , CDL 12 Watt , B22 base all as specified and as directed. |
| 143 | Supply and fix in repairs Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specifiedand as directed. |
| 144 | Supply and fixing in repair Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours andconnecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as directed. |
| 145 | Supply and fixing in replacementLED tube light fittings mirror type with hight output diffuser 1 feet, 5/6 watt 220V AC, decorative type with driver holder and LED lamp including connectiong up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 146 | Supply and fixing in replacement Led wall light fittings 1 x 9W LED lamp, decorative wall light fixture made up of polycarbonate, suitable for 9W LED lamp B22 base complete with all accessories internally per wired including and connecting up with PVC insulated and sheathed, 1100 V grade, flexible, multistranded copper conductor three core cable complete all as directed. |
| 147 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 148 | Supply and fixing in repairs BLDC Five star rated Ceiling fans complete with blades, downrods, electronic regulator and accessories, 230V , 1200 mm sweep, with Minimum air delivery 210 CFM complete all as specified and directed. |
| 149 | Supply and fixing in repair exhaust fan steel body AC single Phase. 230V of size 300m sweep with blades, and frame and louvers complete all as specified and directed. |
| 150 | Supply and fixingin replacementLED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 151 | Sheet Metal enclosure TPN verticle suitable of TP/FP G frame MCCB of cap upto 100 amps,double door of 4 ways, built in bus bars complete suitable for 415 volts, AC, 50 Hz complete all as specified and directed. |
| 152 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 153 | Supply and fixing in repairs MCBs, TPN, 415 volts, breaking capacity 10 KA, rating 20-63 amps, complete all as specified and directed. |
| 154 | Supply and Fixing in repair MCBs, SPN, 240 volts, breaking capacity 10 KA, \"C\" series, rating 40-63 amps,complete all as specified and as directed. |
| 155 | Supply and Fixing in repair MCB, SP,240 volts, breaking capacity 10 KA, \"C\" series, rating 6 to 32 amps, complete all as specified and as directed. |
| 156 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit notless than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 157 | Supply and fix in repair sub main wiring with single core cable 2 x 6 sqmm FRLSinsulated unsheathed stranded copper conductor cable 1100 Volts grade drawn through PVC casing/caping 25 mm dia ISI marked fixed on wall/ceiling,alongwith 1x4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly , complete all as specified and directed.Note:-Two runs of6sqmm cable alongwith one run of 4sqmm PVC insulated copper conductor as earh wire inclcasing caping shall be measured as one unit. |
| 158 | Supply laying jointing and testing XLPE and PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core complete all as specified and directed. |
| 159 | Exc in trenches not exc. 1.5 m wide andexc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed. |
| 160 | Returning, filling in including spreading, leveling, watering and well ramming excavated soilin layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
| 161 | Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed. |
| 162 | Supply and fixing DWC HDPE pipe for protection of power cable (orange in colour) of size 50 mm dia complete with fittings and including cutting, jointing and clamping all as specified and directed. |
| 163 | Supply laying jointing and testing XLPE and PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 2 core complete all as specified and directed. |
| 164 | S&F in repair ceiling mounting LED light fittings luminaire 600mmx600mm,35/36 watt, 220 v, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed. |
| 165 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
