|
| 1 | Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, demolition of mud phuska etc including cleaning the surface by water/airpressure and removal of debrish beyond MOD land complete all as specified and directed. |
| 2 | Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation. The surface is then to be tested for water tightness with a ponding test for min. 2 days and then top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable.Note:- 1. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only.2.The guarantee for treatment shall be given by the contracyor in writing for a period of 5 year and security deposit @ 2.5 % of total cost of treatment shall be given for 5 year from the date of completion of work. |
| 3 | M&L for 30mm x 30mmx 7-9mm thick sizeroofcool tile to reduce room temperature, slip resistance , ocian blue in colour laid on cement mortar 1:6 and pointing in CM 1:3 over 15mm thick screed bed complete all as specified and directed. |
| 4 | S&F rotational moulded polethylene triple layer white in color water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoistedand fixed in position all as pacific SSR Part- I including dismantling ofexisting water tanks capacityn exc 1000 ltr complete all as specified and directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 6 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 7 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 8 | M&L 75mm thick cement concrete (1:3:6) type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection and path laid in panels not more than 3.0 mtr in lenght laid to slope 1:30 including forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 Parts of sand) surface,complete all as specified and directed.(Note:- The quoted tates are deemed to be inclusive of material against work and joints fillings.) |
| 9 | M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub floors/sub base complete all as specified and directed. |
| 10 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge. |
| 11 | M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge |
| 12 | Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed. |
| 13 | M&L Rendering 5mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified as directed. |
| 14 | M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed. |
| 15 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 150 ml per 50 kg of cement finished even and smooth without using extra cement complete all as specified as directed.Note:- The quoted rate shall be inclusive of the cost of liquid waterproofing compound (WPC) and no separate payment shall be made on this account. |
| 16 | M & L preparation new plastered surfaces of any description , including cornices and applying three coats of whitewash on ceiling complete all as specified and as directed. |
| 17 | M&L for providing and applying minimum 1mm thick wall careputty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed. |
| 18 | M&L for preparation ofnew plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer complete all as specified as directed. |
| 19 | M&L for preparation ofnew plaster surfaces of wall and applying two coats of exterior emulsion paintover a coat of alkali resistant primer complete all as specified as directed. |
| 20 | M&L for Complete removal of existing external surface by Washing, rubbing down and stopping of old distempered and painted surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10+E35 sqm over new surfaces. complete all as specified and directed. |
| 21 | M & L for preparation of old surfaces of any description , including cornices and applying two coats of whitewash on ceiling complete all as specified and as directed. |
| 22 | M&L for preparation ofold distempered and painted surfaces of wall and applying two coats of OBD over 1mm thick wall care putty complete all as specified and as directed. |
| 23 | M&Lpreparation ofold painted steel surfaces of any description,over 10cm width or girth and apply one coat of synthetic enamel paintcomplete all as specified and as directed . |
| 24 | Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 25 | Taking down wooden chowkhat without taking ofshutter from the frame exc 1.5 sqm but not exc 4 Sqm each complete all as specified and directed. |
| 26 | Taking down wooden chowkhat without taking ofshutter from the frame n.exc 1.50 Sqm each complete all as specified and directed. |
| 27 | S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawingcomplete all asdirected. |
| 28 | S&F factory made solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC \"C\" channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification as specified. |
| 29 | S&F in repair 18 mm thick HDHMR (High density high moisture resistance) board of grade1 quality make:Green Ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finsih mica of appoved quality make:- Century or as approved by GE Fixed with screws, slovent cement/adhesive to make cupboard shutters, sides, top, bottom, shelves inside the cabinet shutter or drawer including piano hinges and magnetic catcher,knobs complete all as specified and directed. |
| 30 | S&F factory made pressed steel frames section 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and directed. |
| 31 | S&F factory made pressed steel frames section 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and directed. |
| 32 | M&L for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed. |
| 33 | M&L factory made 35mm Plain framed, panelledshutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreateds complete all as specified and as directed. |
| 34 | S&Ffactory made 35mm thick 2nd class HW glazed skeleton shutters open rebated and preparedto receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed. |
| 35 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 36 | M&L for preparation of newwooden based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 37 | S&F butt hinges medium weight cold rolled mild steel 125mm complete all as specified and directed. |
| 38 | S&F 125mm aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 39 | S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed. |
| 40 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed. |
| 41 | S&F floor door stopper of aluminium alloybody and tongue with hard drawn steel springwith 140mm overall length of cover plate complete all as specified and directed. |
| 42 | S&F mild steel 300mm, ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed. |
| 43 | M&L powder coated aluminium (sliding/ hangingtype) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grillwith all fittings & fixture complete all as specified and directed . |
| 44 | M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality Afixed independently, with or without connecting plates, etc complete all as specified and directed. |
| 45 | M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed. |
| 46 | S&F 4mm dia galvanised steel wire, 50x50mm mesh, made up into mattresses or cages, lapped,wired and laid in position, including closing after filling complete all as spcified and directed. |
| 47 | M&Lpreparation ofnewsteel surfaces of any description,over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxidecomplete all as specified and as directed . |
| 48 | S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers but of anodised aluminium alloy etc complete al as specified and directed. |
| 49 | S&F in repair vitreous china ware wash hand basin 550mmx 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracketand making good all connections complete all as specified and directed. |
| 50 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or strap ,seat cover , including connection to trap /drainand to flushingpipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed. |
| 51 | S&F 15 mm bore PVC connection600 mm long withbrass nuts and washers on both ends all asin repairs specified and directed. |
| 52 | S&F in repair brass chromium plated shower rose 125mm size size fixed to pipe complete all as specified and directed. |
| 53 | S & F in repair for towel rail 600mm long complete all as specified and directed. |
| 54 | S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed. |
| 55 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 56 | Supply and fix in repairs15 mm bore bib tapbrass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairsall as specified and directed. |
| 57 | S&F in repairs15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. |
| 58 | S&F in repairs brass chromium platedtwo way anglecock, of 15 mm bore complete all as specified and directed. |
| 59 | S&F in repair stop valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 60 | S&F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 62 | Taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removal to store up to complete all as specified and directed. |
| 63 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed. |
| 64 | S & F 25 mm bore ofCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors complete all asspecified. |
| 65 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete all as specified and directed. |
| 66 | Taking downeaves gutters and rainwater PVC/CI pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 67 | S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified &directed . |
| 68 | S&F for 110mm bore PVC (SWR) bendsprovided with access door all as specified &directed . |
| 69 | S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified &directed . |
| 70 | S&F for 75mm bore PVC (SWR) bendsprovided with access door all as specified &directed . |
| 71 | S&F Cast iron pipes 100mm with spigot and socket ends, vertically cast, class A, in any length complete all as specified directed. |
| 72 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing and including 20mm thick screed bed in CM 1:6, complete all as specified and directed by Engr in Charge. |
| 73 | M & L for pre-polished Machine cut kota stone slab20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed in cm 1:3and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as directed and as specifiedby Engineer-in-charge. . |
| 74 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 75 | M&L for brick work with subclass \"B\" brick straight or curved on plan 6m mean radious built in CM (1:4) etc as directed . |
| 76 | S&F in repairsstainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on todwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm X 460 mm and bowl size 410X330X160mm complete all as directed . |
| 77 | S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long all as specified. |
| 78 | M&L for Plain cement concrete (1:2:4) type B-O, using 12.5mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed. |
| 79 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc. |
| 80 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto as above….. |
| 81 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stoneincluding grinding and polishing including 20 mm screed bed in CM 1:6 complete all as specified and directed. |
| 82 | S&F 1 mm thick high-quality stainless steel (SS-304 grade) kitchen plate rack 750 x 900 mm ( Weight not less than 7 Kg / Each) including all necessary brackets, screws and fixing accessories required for proper installation on wall. all as specified and as directed. |
| 83 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendereing, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required internal dia of pipe 150mm complete all as specified. |
| 84 | M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including complete all as specified and directed. |
| 85 | M&L 100 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified. |
| 86 | M&L for providing and laying machine-pressed precast concrete interlocking paver blocks, vibro-compacted and rubber moulded, of approved shape and size, manufactured with grey cement and pigment, conforming to IS:15658-2006, 60 mm thick, M-35 grade, laid over and including 50 mm thick sand cushioning layer, the surface hand-levelled, watered and consolidated to proper line and level, complete including preparation of base, alignment, jointing and finishing, complete all as specified and as directed by Engineer-in-Charge. |
| 87 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. for taking credit and making good disturbed surfaces of walls, floors, etc. |
| 88 | M&L for point wiring of one light point controlled by one switch complete with 1.5 sqmm single core PVC insulated andunsheathed cable 1100 volts grade with multistranded copper conductor drawn through concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60 mm thick MS sheet concealed in walls, suitablefor housing the modular electrical accessories as switches, socket outlets, fan regulators etc., all as specified and as directed. |
| 89 | Ditto as above but for one fan/Exhaust fanpoint controlled by one switch and one regulator….ditto… |
| 90 | Ditto as above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.….ditto… |
| 91 | Ditto as above but for one 3 pin switch socket outlet point 5 Amps on Independentboard with other switch.….ditto… |
| 92 | All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.….ditto… |
| 93 | M&L Switch piano flushtype single pole, one way 5 Amps 230 Volts AC circuit complete all as specified & directed by Engr-in-Charge. |
| 94 | M&L for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge. |
| 96 | M&L Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified & directed. |
| 97 | Supply and fix in repair single pole and neutral sheet metal enclosure with a two pin and earth plug and socket (Metal clad) 20 Amps complete with one single pole MCB 20 Amps capacity complete all as specified & directed. |
| 98 | S & Fix in repair ceiling rose surface backlite 65x50mm 3 terminals complete all as specified & directed. |
| 99 | S&F in repair MCB, SP, 6 to 32 Amps, \"C\" curve, 10 KA breaking capacity, 240 volts complete all as specified and directed. |
| 100 | Supply and fixing in repair of LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as per Havells Lumene Plus Pro Batten LUMILINEPLUSPROBS20WLED840SPCSSINDand equivalent Make : phillips/Bajaj or equivalent make specified in PS. |
| 101 | S&F in repair 10 watt LED light fitting engineeringplastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. ENDURA LINE ARNE OBS10WLED865SPCWHor equivalent in Bajaj / CG or equivalent make specified in PS. |
| 102 | Supply, installation, testing and commissioning of storage type electric water heater, vertical type, 25 litres capacity, 1500 watts, 5-Star BEE rated, with glass-lined inner shell and PUF insulation, complete with hot and cold water connections, inlet and outlet piping, electrical connections, necessary fixing arrangements and accessories, including dismantling of existing unserviceable water heater and depositing the same to MES store, writing CA No. and MES No. with approved synthetic enamel paint in colour, style and size as directed by Engineer-in-Charge, and testing after installation, complete all as specified and as directed by Engineer-in-Charge |
| 103 | M&L in repair for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 4.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit) |
| 104 | Supply and fixing ceiling fan complete with blades , down rods , electronic regulator and accessoreis , 230 Volts, 1200 mm sweep. Min Air delivery 210 CFM with service value 6.00 BEE . Five star rated with brushless 5 star rated , 1200mm sweep , 230 Volts, 50 Hz AC, complete with blades,with anti suicide down rod, setof canopyand connecting up including three core PVC insulated multi stranded copper conductodirect current motor (BLDC) complete all as specified and directed. including taking down old fan and deposited in MES store, writing CA No. and MES No. with approved synthetic enamel paint in colour, style and size as directed by Engineer-in-Charge, and testing after installation, complete all as specified and as directed by Engineer-in-Charge |
| 105 | S&F in replacement U/S and broken exhaust fan (air freshener) single phase 230/240 volt AC 250mm sweep with louvers, plastic body, with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store writing CA No. and MES No. with approved synthetic enamel paint in colour, style and size as directed by Engineer-in-Charge, and testing after installation, complete all as specified and as directed by Engineer-in-Charge.Note:- old exhaust fan will be deposited in E/M store yard. |
| 106 | S&F in replacement U/S and broken exhaust fansingle phase 230/240 volt AC 300mm sweep with louvers, metal body , with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store, writing CA No. and MES No. with approved synthetic enamel paint in colour, style and size as directed by Engineer-in-Charge, and testing after installation, complete all as specified and as directed by Engineer-in-Charge.Note:- old exhaust fan will be deposited in E/M store yard. |
| 107 | S&F in repair testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:- Havells Cat No. JETAAADORNNXTFLS200WLED75P60DTOTG or equivalent iin Bajaj/ Philips/CG/ WIPRO or equivalent make specified in PS. |
| 108 | S&F in repair factory made epoxy powder coated distribution board double doorTP& N 4 ways (MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed. |
| 109 | S&F in repairMCB, TPN, 40 to 63 Amps, \"C\" curve, 10 KA breaking capacity, 240 volts complete all as specified and directed. |
| 110 | S&F in repairfactory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover(IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed. |
| 111 | S&F in repairMCB, SP, 6 to 32 Amps, \"C\" curve, 10 KA breaking capacity, 240 volts complete all as specified and directed. |
| 112 | S&F in repair MCB, SPN, 40 to 63 Amps, \"C\" curve, 10 KA breaking capacity, 240 volts complete all as specified and directed. |
| 113 | S&F in repair sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified. |
| 114 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size16 Sqmm 4 core including taking down of old existing cable complete all as specified and directed. |
| 115 | Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 deep and getting out in soft/loose soil complete all as specified and directed. |
| 116 | Returning, filling in, including spreading, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed. |
| 117 | Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 118 | Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note: Punned thickness shall be measured for the purpose of payments. |
| 119 | M&L laying well burnt old sizebricks, sub class \"B\" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed. |
| 120 | Material & Labour for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete of poles/stay assembly/ panels etc. complete all as specified and directed. |
| 121 | Supply, laying & fixing in repair galvanised steel tubing 32 mm bore \"light grade\"with GI fittings in trenches/ under roads/ along pole/ wallincluding FI (25 mm x 6 mm ) clamps as required for cable protection all as specified & directed by EIC. |
| 122 | M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased inand including 40 mm dia GI \"lightgrade\" pipe from upper end of earth plate upto equipments,20 dia bore GI pipe \"light grade\" including taking out and dismantle of unserviceable earth pits complete all as specified and directed. |
