|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete in all respect as specified and directed by Engr-in-charge. |
| 2 | Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed. |
| 3 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for unreinforced complete all as specified and as directed. |
| 4 | Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for precast cement concrete hollow solid blocks exc 10cm widthMasonry type1:3:6 (16 mm using aggregate as per IS 383) set in cement mortar 1:6 all as specified and as directed by engineer in charge |
| 6 | M&L for precast cement concrete solid building blocks or slabs 10mm thick typeC1,1:3:6 (20 mm Aggregate) in walls set in cement mortar 1:6 all as specified and as directed by engineer in charge |
| 7 | M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with WPCcomplete all as speicifedand directed |
| 8 | M&L for rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster on any height complete all as specified and directed by Engr-in-charge. |
| 9 | Supply only intergal water proofing compound. (ISI marked). |
| 10 | M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding upto 2th floor. |
| 11 | M&L for applying two coat of Distemper oil emulsion wall surface by Auto Roller over a coat of primer over 2 to 3 mm thick birla putty punning including finishing bySanding Machine and Auto Roller new surface complete all as specified or as directed by Engineer-in-charge.Make: Asian Paint (Tractor)/Berger paints (Bison super) |
| 12 | Excavation in trenches, not exceeding1.5m wide and n.exc 1.5m in depth forand getting out in loose/soft soil.complete all as specified and directed |
| 13 | All as per item No. 12 above but exc 1.5 Mtrbut n.exc 3.00 Mtr and getting out in loose/soft soil.complete all as specified and directed |
| 14 | M & L for cement concrete 1:4:8 type D2 using (40mm graded aggregate ) as in foundations etc, complete all as specified and directed |
| 15 | Returning filling with excavated soil in layers n exc 25cm thick including spreading levelling watering and well ramming complete all as specified and directed by Engr-in-charge. |
| 16 | M&L for HCRM TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified |
| 17 | M&L TMT bars 5mm and over upto and incl 10mm dia in stirrups, spacers and binders cut to length bent to shape required including bending, hooking binding with and incuding MS wire not less than 0.9 mm dia. |
| 18 | Removal of debris/malwa/surplus soil to a distance exc 1.50 Km but n exc 5.00 Km out side MD land and depositing where as directed, complete all as specified and directed by Engr-in-charge. |
| 19 | Material and labour for reinforced cement concrete design mix M-30 using 20 mm graded granite stone aggregate in foundaions including rafts, footings, foundaion beams, plinth beams, bases for columns etc, basement slabs, underreamed piles and mass concrete all as specified and as directed. Note : Reinforcement and form workshall be measured and paid separately. |
| 20 | Material and Labour for reinforced cement concreteM30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed |
| 21 | Material and labour for reinforced cement concrete design mix M-30 using 20 mm graded stone aggregate tolintel beams,cantilevers over 1.5m span completeall as specified and as directe |
| 22 | M& L for Use and waste of formwork to sides of foundation footing, forrough finished surfaces, flat complete all as specified and as directed. |
| 23 | M& L for Use and waste of formwork to sides of coloumns,pillars,piers post, forrough finished surfaces, flat complete all as specified and as directed. |
| 24 | M& L for use and waste of Formwork to sides beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat and rough finished surface of concrete. |
| 25 | M&L for 18 to 20 mm granite slab of any size for window jams and similar work over and including 15 mm thick back coat or bedding layer ofcement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed by Engr-in-charge. |
| 26 | Rounding of edges of stone slabs one edge such as in steps cooking platforms, and other similar situations complete all as specified and directed by Engineer In Charge |
| 27 | S & F mild steel workas joints angles,channel or tee sections fixed independetly with out connecting platesconforming to Fe-410 W or grade E-250 quality -A complete all as specified and directed. |
| 28 | S & FPlates (plain or chequered ) channel square cut or notched (ordinary andcounter sunk) forming holes without any attachementconforming to Fe-410 W or grade E-250 quality -A complete all as specified and directed. |
| 29 | S and F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410W(Gde E-250) quality Acomplete all as specified and as directed. |
| 30 | Supply and fix mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers andone hexagonal or square nut, length of bolt exceeding 15 cm and not exceeding 22.5 cm and dia 16 to 20 mm complete all as specified and as directed. |
| 31 | Supply and fix Mild steel flat iron section as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and directed. |
| 32 | M&L steel work in tubular truss including special shaped washers etc..complete using ERW or inducting butt welded tubes conforming to IS 161-1979 gradeSt -240complete all as specified and directed |
| 33 | M&L for Framed work such as grills,gratings, etc..with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 Extra only over Itemfor portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. for ornamental and indicated design |
| 34 | Supply and fix 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 35 | M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge. |
| 36 | S & Ffor4mm dia GI steel wire 150 x100mm mesh made up of into mesh mattres or cage lapped wired and laid in position including closing after filling with welding and fixing as reuired complete all as specified and directed.up to height of 12 to 15meter |
| 37 | M&L for pre painted galvalume aluminium zinc coating GI based corrugated top finished steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks or welding complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks or welding complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI up to1200mm length adjusting level fixed to roof slab by means of cleats made out of FI 40x3mm size 60 cm long and expansion holdfast 12.5mm dia 40mm long with and including PVC profile ceiling of surface laminated any pattern and any shade of 7 to 10 mm thickness and any colour completely all as specified and as directed. |
| 40 | S&F for powder coated aluminium (min thickness of powder coating 50micron)work for doors and partions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confirming to IS ;1285 fixed with dash fasteners of required dia and size ,or with fixing clips or expension hold fasteners for filling of gaps at junctions,i,e at top,bottom and sides with required EPDM rubber/neoprene gasketetc, support the frames including necessary filling up of tc aluminium sections shall be smooth rust free straight mitred and jointed mechanically whatever required including cleat angle,aluminium snap beading for glazing/panellingC.P brass / stainless steel screw, including all necessary hardwarefittings partion/ doors complete all as directed by Engineer in charge |
| 41 | S&F for colour powder coated aluminiumframe for, doors ,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr In Charge |
| 42 | S&Ffor aluminium colourpowder coated window ,ventilatorof sliding shutter of sectios weighting 0.55kg/m includingnecessary joining cleatsglazing clips rubber packing aluminium snap beading screws anodised aluminiu fittings such as peg stays 150mm longs 01 Nos suitable handles 01 Noscomplete all as specified and as directed. |
| 43 | S&F for6mm thick toughtned glass or opeque pane reuired colour and sizeincluding all necessary hardwarefittings partitions,doors /windows complete all as directed by Engineer in charge. Make: saintgobin/modiguard |
| 44 | S&F for stainless steel wire cloth 0.36mmnominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including dismantling of old mesh complete all s specified and directed by EIC |
| 45 | Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, with locking arrangement other parts made of mild steel heavy duty and fixed complete all as specified and directed.Make: Sandhu, Everest |
| 46 | S&F of 4.80mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 47 | S&F forhasp and staples 100mm long alluminium anodised complete all as specified and directed |
| 48 | S&F in repair of 100mm extrded aluminium alloy handles, fabricated type anodised |
| 49 | S&F in repair of aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge. |
| 50 | S&F in repair of aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge. |
| 51 | S&F in repair of aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for doorshutter size of 850mm to 1000mm in width weight between from 61 to 80kg and fixed as specified and as directed. |
| 52 | M&L in repairfor roofing tiles of mangalore pattern interlocking laid dry and at side jointed including applying of one coat of exterior antifungal paint approvedcolour and dismantling of tiles complete all as specified and directed. |
| 53 | M&L in repairforridge or hip tiles to suit mangalore pattern roofing tiles bedded and jointed with lime mortar 1:3 or cement mortar in CM 1:6 including applying of one coat of exterior antifungal paint approvedcolour complete all as specified and directed. |
| 54 | M&L for RCC1:2:4 type B1 using 20 mm graded aggregate as in concrete forcover slab supported on walls, landing ,canopies and shafts all as specified and as directed by engineer in charge |
| 55 | Material and Labour for glossy finish coloured vitrified ceramic tiles 8-10 mm thick of area of each tiles not exceeding 0.42 sqm but not exceeding 1.0 Sqm, of any shade of any pattern (pattern consists combination of two or more tiles ) as in vertical surfaces etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. |
| 56 | M&L for 8 to 10 mm thick ceramic joint free Coloured Tiles, of size 600x100/150mm, on vertical surface/Skirting over and including 10mm thick rencering in CM 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in white cement with pigment to match the shade of the Tiles, complete all as specified and as directed. |
| 57 | Material and Labour for letters or figures of stainless steelof any size andthickness on steel surfaces & the like similar work of any size , white or golden yellow or any colour, etc up to height of 12 to 15 meter complete all as specified and directed by Engr-in-charge. |
| 58 | Material and labour for panting lines, dishes, arrows writing letters etc. on steel surfaces & the like similar work of any size with synthetic reflective paint, white or golden yellow or any colour, etc up to height of 12 to 15 metercomplete all specified and directed by Engr-in-charge. |
| 59 | S&F for Indian coast guard emblem / symbol as per given design of ready made making and stickering on earmarked place as required size and shap etc fixing up toup to height of 12 to 15 metercomplete all specified and directed by Engr-in-charge. |
| 60 | S&F to providing and fixing 0.71mm thick Aluminium alloy colour coated roofing sheets of alloy IS designed31500,temper H x 8confirming to IS 737 and dimension as per IS code 2676 with character sticks of good formability and Corrsion resistance and throughed profile with centre to centre pitch of 200mm,depth of 32mm ,overall profile width 1092mm, cover width 1000mm at all height,level and location.The profile sheet shall be fixed to truss members in slop or required pitch or curvature including all fiitings and fixture complete all as specified and directed |
| 61 | Dismantling floor hearth or interlockingtiles including cement mortar bedding (but not backing) removing serviceable tiles & rubbish off the premises completeall as specified and as directed by Engineer-in-Charge |
| 62 | M&L in repairforprecast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-50 grade with using grey cement and pigment laid complete all as specified and directed. |
| 63 | All as per item No. 62 above but excepet paver block complete all as specified and directed |
| 64 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 65 | Rolling and consolidating formation surfaces and fillied up area using power roller execeding 8 tons and n, exe 12 tons complete all as specified and directed by Engr-in-charge. |
| 66 | Laying and compacting 150 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade I as specified, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, Combination thereof as per the grading required. The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed |
| 67 | M&L PCC (1:3:6) type C-2 (using 40mm graded agg) 150mm thick sub base .complete all as specified and directed by Engr in charge |
| 68 | M&L for Providing, cement concrete in kerbs stone rounded or chamfered on edges type B1 1:2:4 20mm graded aggregate Complete all as specified and directed |
| 69 | Material & Labour for providing and fixing stainless steel (Grade 304) made of hollow tubes any size and any diachannels platesfor gates etc and similar workincluding , welding grindingbuffing polishing and making curvature (where ever required) and fitting the same with necessary stainless nuts and bolts complete inc, fixing the railing with necessary accessories & SS dash fasteners SS bolts ss rollers solid and similar work.. etc,. of required size on the top of floor or the side of waist slab with suitable arragement complete all as specified |
| 70 | S&F for 25mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Takingdown unserviceable Steel Water Tubing with Fittings and Connections, etc., including water tightness test complete all as specified and as directed. |
| 71 | S&F in fix20mm dia borePVC perforated caps screwed down end of puff to pressurepipes or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 72 | S&F for PPR gate valves 25mm dia (brass insert) as per requirement of the site complete all as spd and directed by EIC |
| 73 | M&Lfor waterproof treatmentto fountain and usinghigh-quality fountain waterproofing product. SANI-TRED® is the revolutionary liquid rubber waterproof coating system designed to completely and permanentlywaterproof to fountain like similar work as per manucature instructions complete all as specified and directed by Engineer in Charge |
| 74 | M&L for approved quarried stone 100mm thicklaid dry in pavings faces hammer dressed sides fitted fairly holows wedegs in white stone chips and interstices fitted with aproved including joints are grouted flush with cement mortar 1:6 complete all as specified and directed by Engineer In charge |
| 75 | M&L for 75mm thickcement conctrete 1:3:6 type C-2 using 40 mm graded aggregate as in Plinth Protection finished rough complete all as specified and directed. |
| 76 | M&L for Hardcore of gauge n exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled/rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 77 | M & L forpoint wiring with PVC insulated unsheathed multistranded copper conductor cable, 1100 volt grade, FRLS of size 1.5 Sqmm drawn in and including PVC rigid conduit of size not less than 20mm dia with accessories(concealed)including continues 1.5 Sqmm copper conductor(multstanded) PVC insulated and unseathed cable earth wire to common earth and connected to earth dolly complete all as specified conforming to IS-694 for the following :- (a) One light point controlled by one switch 6 Amps |
| 78 | (b) One fan/ exhaust point controlled by one switch 6 Amps |
| 79 | (c ) One 3 pin socket outlet 6 Amps on Independent board |
| 80 | Supply and fixing of Modular Switch, one way, 6 Amps complete all as specified and directed |
| 81 | Supply and fixing of Modular Switch socket outlet 3 pin 5 amp flush type 3 module complete all as specified and directed |
| 82 | Supply and fixing of ceiling rose in poly carbonate 3 plates flush type 6 amps, 250 volts AC complete all as specified and directed. |
| 83 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Havells / Bajaj / Crompton / Wipro / Philips / Luker |
| 84 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete all as specified and directed. Make : Havells / Bajaj / Crompton / Wipro / Philips / Luker |
| 85 | Supply and fixing of fountain/ponds/decoration underwater Light LED Stainless steel underwater in aqua blue colour with SMPS and IP 68 waterproof grade, 4 Watt, light with driver strong, stainless steel (316) body, beam legth upto 12 ft complete all as specified and directed.Make : Havells / Bajaj / Crompton / Wipro / Philips / Luker |
| 86 | Supply and fixing MCB SP 6-32 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 87 | Supply and fixing MCB SPN 16 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 88 | Supply and fixing MCB SPN 40 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 89 | Supply and fixing sheet metal enclosure distribution board(DB),when MCB to be used, dust and vermin proof, Single pole and neutral (SPN) 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommerDouble door, flush to wall complete all as spd and directed . |
| 90 | Material and labour for Sub main wiring using two single corePVC insulated cable (FRLS) 6 sqmm copper conductor multi stranded and 6 sqmm copper conductor insulated cable (FRLS) using as earth wire drawn through and including PVC rigid conduit of size not less than 25mm dia with accessories(concealed) complete all as specified and directed. |
| 91 | Supply and fixing Submersible Pump with Control Panel, horizontal, single-phase pump with a motor power of 0.5 HP and a speed of 2880 rpm,160-240 V, Single Phase and a power rating of 0.37 kW, Delivery Casing Material: Cast Iron, Motor Body Material: SS, Shaft Material: SS 410.The pump has a discharge range of 6390-1800 lph and a motor cooling type of 10-22 m3/h complete all as specified and directed. Make : KOS-0520 of Kirloslar or equivalent in crompton greaves |
| 92 | Supply and fixing 25mm PVC Flexible Long Garden Water Hose Pipe, Kink, Twist & Coil Resistant, Durable, Weather Resistant & Built for Heavy Duty Jobs, Temperatures & Sweltering Heatproof, Durable Hose that can Sustain Extreme Weather without Damaging Quality complete all as specified and directed. |
| 93 | Supply, spreading and levelling clean dry sand in trenches all as specified for cable protection complete all as specified and directed. |
| 94 | Supplying and laying unreinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed. |
| 95 | Supply and lay cableXLPEinsulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core all as specified and directed.Make:- Havells / Polycab / Asian / Nicco / Incab |
| 96 | Supply & fixing LED Bollard light / Landscape light, 10 Watt, IP 65 including necessary connection, foundation, driver etc outdoor type ensuring excellent distribution and high system lumen efficacy including foundation as recommended by OEM complete all as specified and directed. |
| 97 | Supply and laying CPVC SDR-11 & plain CPVC SDR11 fittings , 50 mm dia complete all as speciified |
| 98 | Supply and laying CPVC SDR-11 & plain CPVC SDR11 fittings , 40 mm dia complete all as speciified |
| 99 | Supply and laying CPVC SDR-11 & plain CPVC SDR11 fittings , 25 mm dia complete all as speciified |
| 100 | Supply and laying PPR Gate Valve 50mm dia complete all as specified and directed. |
| 101 | Supply and laying PPR Gate Valve 25mm dia complete all as specified and directed. |
| 102 | Schedule of Credit (Minus) Rs.124200.00NOTE: Bidder shall insert credit amount of Rs. 124200.00 as ratein Green field under Col-13. |
