|
| 1 | FORM WORK (h) Edges of slabs and breaks in floors and walls. Under 20 cm. Wide up-to all lead and lifts as per the diretion of Engineer in Charge at site |
| 2 | CEMENT CONCRETE Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) up- to all lead and lifts as per the diretion of Engineer in Charge at site. |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) up-to all lead and lifts as per the diretion of Engineer in Charge at site. |
| 4 | PAVING & FLOORING Prowaling und laying vitrified floor double charged tiles in different sites (thicknest to be specified by the manufacturer) with water absorption less than 0.01% and confarming to 15: 15622, of approved makr, in all colours and thades, laid on 20mm thick cement mortar 10 (1 cement course sund), jointing with grey cement slurry 3.3 kg/sgm.including grouting the joints with white cement and matching pigments sec. 600 x 600 mm up-tu all irad and lifts as per the diretion of Engineer in Charge at site. |
| 5 | White glazed tiles 6 to 12 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry up-to all lead and lifts as per the diretion of Engineer in Charge at site. |
| 6 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1.4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black Cherry Red, Elite Brown, Cat Eye or equivalent up-to all lead and lifts as per the diretion of Engineer in Charge at site. |
| 7 | CEMENT PLASTER 15 am cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall up-to all lead and lifts as per the diretion of Engineer in Charge at site. |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge at site. |
| 9 | 20 mm nominal outer dia pipes |
| 10 | Providing and fixing Nigh pressure PVCfinnies/supreme (Ag presture heavy duty make spigot and socket wurte and ventilating pipe 1st marked mcluding fixing with approved adhasive etc complete including curriage of all labour equipment and material to variour Nication through all modes of transportation in all leads and lift, including all incidental charges |
| 11 | 120 millimetres nominal size |
| 12 | Providing and fixing PVC ISI marked floor traps of self-cleaning design including fang with approved adheme complete including cait of cutting and making good the walls and the floors, as per HP PWD specification |
| 13 | (a) 110 (One hundred ten) millimetrer norminsl size |
| 14 | Providing wind flating PVC single eyoul brunch with over access door, ISt marked insertion rubber wather I mm thick bolts and nuts complete including feng with approved adhesive etc. cumplete |
| 15 | (a) 110 (One hundred ten) millimetres nominal size |
| 16 | Providing and fixing PVC door bend with oval acces door, Insertion rubber washer 3 mm thick belts and nuts ISI marked complete Including fixing with approved adhesive etc. complete |
| 17 | (a) 110 mm dia |
| 18 | Providing and fixing PVC door tee ISI marked including fixing with approved adhesive etc complete. |
| 19 | (a) 110 mm dia |
| 20 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete |
| 21 | 110 mm Dia |
| 22 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. |
| 23 | 110 mm Dia |
| 24 | Providing and fixing PVC \"P\" or \"S\"trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. |
| 25 | 110 mm Dia |
| 26 | Providing and fixing PVC cowl including carriage of materials within all leads and lifts: |
| 27 | 110 mm Dia |
| 28 | Providing and fixing vitreous wash down Cera Make CAMEL RIMLESS 555 x 370 x 365 mm Cat. No. 51044167 P Trup with Duroplast slim soft close seat cover or equivalent series of Hindware/faquar white colour studio set along with CP. JET SEAT COVER, Concealed Cistem Set with Full Frame Cat. No. B1110111 with buttons 81120105-W type 1760 Shine Finish and twin flushing valves etc. complete in all respect, water closet (European Type - WC pan) with integral \"p\" trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) Star White including carriage of materialss upto all leads and lifts ane as per direction of Engineer in charge.(Snow white) |
| 29 | Providing and fixing vitreous wash down Cera Make CAPTOR 655 x 345 x 750 mm Cat. No. 510132055 Trap 220 mm with Slim soft clase seat cover S Trap 220 mm with slim soft close seat cover S Trap 220 mm with slim soft close seat cover S Trap 220 mm with Slim soft close seat cover Trup with Duroplast slim soft clase seat cover or equivalent series of Hind ware Jaquar white colour studio set along with CP. JET SEAT COVER, CISTERN and twin flushing valves etc complete in all respect, water Closet (European Type - WC pan) with integral \"p\"or\"s\" trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) (with cistern, seat cover and flash fitting) Star White Including carriage of materiales upta ail leads and lifts and as per direction of Engineer in charge. (snow white) including carriage of materiales upto all leads and lifts and as per direction of Engineer in charge (snow white) |
| 30 | Providing and fixing wash basin with built in counter Cera CASSERO 400 x 400 x 140 mm Cat. No. 52020163 or equivalent series of Hindware/Jaquar including carriage of materials up to all leads and lifts and as per direction of Engineer in charge |
| 31 | Providing and fixing wash basin with built in counter Cera CELERY 370 x 370 x 115 mm Cat. No. 52020164 or equivalent series of Hindware 2 22 Jaquar including carriage of materials up to all leads and lifts and as per direction of Engineer in charge |
| 32 | Providing and foxing wash basin with built in counter Cera CLOISTER SLIM 420 x 345 x 170 mm Cat. No. 52020170 or equivalent series of Hindware/Jaquar including carriage of materials up to all leads and lifts and as per direction of Engineer in charge |
| 33 | Providing and fixing 15 mm nominal size F2013452 Single lever basin mixer with 315 mm (12.5\") extended body and 600 mm braided connection pipe (without pop-up) or equivalent series of Jaquar/JAL make with 450mm braided connection pipe Including carriage of material upto all leads and lifts and as per direction of Engineer incharge |
| 34 | Providing and fixing steel sink of Cera Make NAOMI Double bowl sink with drain board and waste bin 304 grade stainless steel Size: 1200 x500 mm (48x207 Bowl Size: 385 x 400 mm (15\" x 16\") and 385 x 400 mm (15° x 16) Depth: 230 mm (9) Installation: Over-mount Cat. No. 84724501-Pearl finishor equivalent Nirali/ Diamond make of approved design size: a) including carriage of materials up to all leads and lifts and as per direction of Engineer incharge. |
| 35 | Providing and faxing CP Sink Mixer F1016551 Single lever sink mixer (table mounted) with 235 mm (9\") long swivel spout and 450 mm long braided connection pipe or or equivalent series of Jaquar/jal with 150mm long swivel spout, connecting legs and wall flange including carriage of material up to all leads and lifts and as per direction of Engineer incharge |
| 36 | Prowling and plating CP Brass chain 50 cm long and rubber plug of following stres for sink or wash basin. (32 mm dia) including carriage of material up to all leads and lifts and as per direction of Engineer Incharge |
| 37 | Providing and fixing 100mm pipes PorS Trup (Heavy Duty) for water closet PVC D-plast/Supreme/ Phinolex including carriage of material up to all leads and lifts and as per direction of Engineer incharge |
| 38 | Providing and fixing bottel trap with fully custed body (with integral partition) 32mm with 190 and 125mm long connecting pipes and wall flang Cera make Cat. No. F8060101 150mm or equivalent or equivalent series of jal/jaquarincling carriage of material upto all leads and lifts and as per the direction of Engineer-in-charge |
| 39 | Providing and fixing CP.Brass Towell rail Cera Towel rail 600 mm (24\") F5003103 or or equivalent series of JAL/Jaquar complete with C.P. Brass brackets fixed to wooden plugs with CP. Brass (600mmx20mm), including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 40 | Providing and fixing CP brass liquid soap dispenser Cera make Catalog No. F5002111 or or equivalent series of JAL/Jaquar with CP brass brackets fixed to wooden cleats with CP brass screws including carriage of material up to all leads and lifts and as per direction of Engineer incharge. |
| 41 | Providing and fixing CP brass waste coupling for wash basin or sink Cera make cat no F8050102 or equivalent series of JAL/Jaquar 32 mm dia with half thread 32mm including carriage of material upto all leads and lifts and as per direction of Engineer incharge |
| 42 | a) CP. Brass coat and hat robe hook Two way Cera MakeCat No. F5002108 or equivalent series of JAL/Jaquar including carriage of material up to all leads and lifts and as per direction of Engineer incharge |
| 43 | Providing and fixing CP. Paper Holder Cera make Cat No. F5007110 or equivalent series of Jaquar/JAL make including carriage of material up to all leads and lifts and as per direction of Engineer incharge |
| 44 | Providing and fixing CP brass bib tap with long body capstan head 15mm dia (Cera make Cat No. F1014151) or equivalent series of Jaquar/JAL make with wall flange and areator including carriage of material to all leads and lifts and as per direction of Engineer incharge. |
| 45 | Providing and fixing CP brass bib tap with short body capstan head 15mm dia (Cera make Cat No. F1014151) or equivalent series of Jaquar/JAL make with wall flange and areator including carriage of material to all leads and lifts and as per direction of Engineer incharge |
| 46 | Providing and fixing P.V.C. waste pipe of approved make for wash basin and sink including carriage of material upto all leads and lifts and as per direction of Engineer incharge |
| 47 | Providind and fixing 15mm nominal size Pillar cock (Cera Make Cat. No. F1014101) or equivalent series of Jaquar/JAL make with aerator including carriage of material upto all leads and lifts |
| 48 | Providing and fixing 15mm nominal size CP brass angle valve/Stop Cock Cera Make Cat Na. F1014201 or equivalent series of Jaquar/JAL make with flange including carriage of material to all leads and lifts and as per direction of Engineer incharge. |
| 49 | Providing & Fixing CP. Towel Ring Cera Make Cat No.F5002105 or equivalent series of Jaquar/JAL make including carriage of material upto all leads and lifts and as per direction of Engineer incharge |
| 50 | Providing and fixing 100mm dia C.P. Grating including carriage of material up to all leads and lifts and as per direction of Engineer Incharge |
| 51 | Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-1) conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawt plugs etc. all complete. Carpet flooring as covering for verandah and rooms of wooden wooden floor |
| 52 | 5.0 mm thick glass panes (weight not less than 12.5 kg per sqm) |
| 53 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick |
| 54 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 55 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 56 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with CP. brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge |
| 57 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand): |
| 58 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Please Enable Macros to View BoQ information |
