|
| 1 | PART-A (NH-353D Umred to Nagbhid sction) |
| 2 | BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen3.30% of specified grade(VG-40 bulk bitumen rates are considered to arrive at rates) (Including tack coat of VG-30 @ 3.0kg/10Sqm) |
| 3 | BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1,premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 40mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-40 bulk bitumen rates are considered to arrive at rates) (Includind tack coat of VG-30 @ 2.5kg/10Sqm) |
| 4 | PART-B (NH-353D wardha Pulgaon Road) |
| 5 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 6 | BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100 mm compacted thickness with 3.3 % using specified grade of Bitumen. -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, vibratory roller. (VG-40 bulk bitumen rates are considered to arrive at rates) |
| 7 | BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compactionfor 50 mm compacted thickness with specified grade of Bitumen, Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-40 bulk bitumen rates are considered to arrive at rates) |
| 8 | ProvidingandapplyingtackcoatonthepreparedsurfaceheatingbyfamesinBoilerand spraying bitumen withsprayer on Dry / Hungry B.T. surface 3 Kilogram/10 Square Meter. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 9 | ProvidingandapplyingtackcoatonthepreparedsurfaceheatingbyfamesinBoilerand sprayingbitumensetfootedinbitumenbolleronB.T.surface2.5Kilogram/10Square Meter.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 10 | Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. |
| 11 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material |
| 12 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 13 | Dressing of side shoulder / Scrapping the road side shoulder by Mechanical means( By JCB /DOUZER) including excavation of raised side shoulders upto 15cm depth including removing /cutting bushes, grass and dressing shoulder to desired camber and disposing of excavated stuff up to road boundary etc complete. as directed by Engineer In Charge. |
| 14 | Restoration of rain cuts with soil, murum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MORTH specification clause 3002 |
| 15 | Cutting of branches of trees and shrubs from the road way or with in R.O.Wincluding disposal of wood and leaves to suitable location etc. complete |
| 16 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 mmmade out of4 mm aluminum sheet bonded with white retro reflective sheeting ofClass C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C (Type XI Micro prismatic grade sheeting) shall have 10 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier. 900 mm made out of 4mm aluminum composite material |
| 17 | Providing and fixing Mandatory/Regulatory sign boards in circular shape of900 mm diamade out of4 mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier.900 mm dia made out of 4mm aluminum composite material |
| 18 | Providing and fixing of retro- reflectorisedinformatory sign board rectangular/Square in shape having area greater than 0.9 One Square Meter made out of4mm aluminum sheet bonded with white retro reflective sheeting ofClass C ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3,supportedwith back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron postshall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixtures and transportation etc. complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP)sheeting shall have 7 yearswritten warrantyfrom the manufacturer and authorized distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier. 4mm aluminum composite materialofClass C |
| 19 | Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing etc. complete |
| 20 | Excavator (JCB JS140/Tata Hitachi EX120) or equivalent Can be used for scrapping |
| 21 | Tractor (35HP) |
| 22 | Static Road Roller 8 MT |
| 23 | Providing Unskilled Heavy Mazdoor at required such as giving information of flood during monsoon period or other emergency as directed by Engineer-In-Charge |
| 24 | Testing Charges for Cr.Metal-(W.Ab.%, Sp.Gr., Imapact, Crushing, Abrasion, F.I.) |
| 25 | Testing Charges for Sieve Analysis |
| 26 | Testing Charges for Testing of Bitumen (Penetration, Softening Point, Flash & Fire Point, |
| 27 | Testing Charges for Testing of Bitumen (Viscocity) |
| 28 | Testing Charges for Ducility / Elastic Recovery |
| 29 | Testing Charges Testing of Extraction Test. (Bituminous mix) |
| 30 | Testing Charges Testing of Murum (PI<6) Liquid limit & plastic Limit. |
| 31 | Royalty Charges. |
