|
| 1 | Removing old lime/cement plaster from walls including racking out joints 12mm deep & removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete. |
| 2 | Dismantling and removing 2.5 cm AS flooring including stacking of the materials for reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. complete. |
| 3 | Dismantling & removing R.C.C. Columns, beams,slab, staircase landing lintels includingstacking the useful material for reuse and removing the debris within 50 meter lead. |
| 4 | Dismantling and removing doors, windows, and ventilaters after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50 meter lead. |
| 5 | Earth work in excavation of foundation in hard soil within 50m lead and 1.5m lift including rough dressing and levelling the bed etc. complete as directed by the Engineer in Charge. |
| 6 | Supplying & Filling Sand in F & P with well watered and rammed including all cost etc. complete. |
| 7 | Cement Concrete ( 1:3:6 ) using 40mm size hard granite metal including hoisting and laying concrete with watering & curing with all cost etc. complete. |
| 8 | Brick work with Fly Ash Bricks in Cement mortar (1:4) in F & P with watering & curing etc. all complete. |
| 9 | R.C.C./P.C.C. ( 1:2:4 ) using 12mm size hard granite crusher broken chips including hoisting and laying concrete with watering & curing with all cost etc. complete. |
| 10 | Rigid and smooth centring,shuttering for RCC works including false work and dismantling them after casting including cost of materials etc.complete. |
| 11 | R.C.C.M-25 Grade with 20mm and down grade black hard granite ( crusher broken ) stone chips including hoisting & laying concrete and including Cenering & shuttering etc.all complete. |
| 12 | Plinth Bend |
| 13 | Column & Beam |
| 14 | Slope Roof |
| 15 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 16 | Brick work with Fly Ash Bricks in Cement mortar (1:4) in Superstructure with watering & curing etc. all complete. |
| 17 | Fly Ash Bricks in Cement mortar(1:6) in Superstructure with all cost etc. complete.. |
| 18 | 16mm thick cement plaster in cement mortar ( 1:6 ) over brick masonry with watering,curing including all cost etc. complete. |
| 19 | 12mm thick Cement plaster (1:4) over brickwork with neat Cement punning for skirting including curing etc. complete. |
| 20 | Cost of RCC Rings for soakpit of 1.20m dia and 0.30m height and RCC Slab of 1.20m dia including fitting,fixing,carriage etc. all complete.Cost of Rings |
| 21 | RCC Cover Slab of 1.20m dia. |
| 22 | Supplying,fitting,fixing two track UPVC sliding windows of approved make with 6mm thick glass approved quality complete with frame,shutters and all fitting & fixutre. |
| 23 | Providing & fixing ISI marked 35mm mm thick flush door shutters confirming to IS: 2202(Part 1) decorative type , core of block board construction with frame 1st class hard wood and well matchedteak three ply veneering with vertical grains or cross bands and face veneers on both face of shutters of approved design including cost of all door fittings and fixtures etc. complete. |
| 24 | Suppying ,fixing & fitting G.I. angle framed grill for windows. |
| 25 | Supplying,fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make confirming to IS : 13755 laid on 20mm thick cement mortar (1:4) ( 1 Cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-charge. |
| 26 | Fixing of Wall tiles in dados, skirting riser of stepps on12 mm thick bed of Cement mortar 1:3 ( 1 Cement :3 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. |
| 27 | P.C.C. ( 1:2:4 ) using 12mm size hard granite crusher broken chips including hoisting and laying concrete with watering & curing with all cost etc. complete. |
| 28 | Fixing of Floor tiles in floors treads or stepps and landing on 25mm thick bed of Cement mortar 1:1 ( 1 Cement : 1 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. |
| 29 | Fixing of Chequres tiles in floors treads or stepps and landing on 25mm thick bed of Cement mortar 1:1 ( 1 Cement : 1 sand ) jointed with neat Cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles or stones. |
| 30 | Painting 2-coats with any approved paint on newIron work including cost of materials. |
| 31 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x16mm of approved design and quality complete with frame and all fitting and fixtures. |
| 32 | Finishing surface of walls with Cement based wall putty ( Water Based ) of approved make and finished smooth and even surface to receive painting including cost of all materials taxes,labour T&P etc complete. |
| 33 | Scraping old paint with scrapers,sand papering and washing with soap water or soda including scaffolding charges upto 5M height including all cost etc. complete. |
| 34 | Priming 1-coat with any approved primer to wall surface including all labour and cost of wall primer etc complete. |
| 35 | Wall painting 2-coats with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint. |
| 36 | Supplying and fixing of Wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting finished with melamine polishing complete. |
| 37 | Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete. |
| 38 | Providing and fixing to wall ,ceiling and floor CPVC pipes conforming to IS: 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 m spacing including jointing of pipes and fittings with one step CPVC solvent cement and testings of joints of pipes and fittings of the following nominal bore including making good the damages all complete as per PH specification.(20mm dia CPVC Pipe) |
| 39 | 25mm dia CPVC Pipe |
| 40 | Cutting holes through existing brick work including making good the same in CM(1:4) for taking GI/PVC pipes and fittings all complete as per specification. |
| 41 | Cutting grooves in puca floors & walls for taking PVC/GI pipes and making good the damages. |
| 42 | Supplying & Fixing of brass screw down Bib cock/push cock etc complete as per PH specification. |
| 43 | Supplying & Fixing of brass screw down stop cock etc complete as per PH specification. |
| 44 | Supplying & Fixing of Brass Ball Valve etc complete as per PH specification. |
| 45 | Providing and fixing on wall face unplasticized rigid PVC soil, waste and rain water pipes conforming to IS:13592 Type-B including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with nails,bobbins and wooden plugs as per specification or laying in trenches including earth work in exavation in all kind of soil & refilling of trenches as er specification.(Jointing to be measured & paid for separately)(75mm dia) |
| 46 | 110mm dia |
| 47 | Providing and fixing on wall face unplasticized PVC moulded fittings /accessories for unplasticized rigid PVC rain water pipes conforming to IS:13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion etc complete as per specification.( 110mm dia Door Bend) |
| 48 | 110mm dia Plain bend |
| 49 | 110mm dia Single Junction witjh Door |
| 50 | 75mm dia Door Bend |
| 51 | Cutting holes through brick or laterite masonry walls for taking SCI/PVC pipes and mending good the damages etc complete. |
| 52 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge. |
| 53 | Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures etc complete. |
| 54 | Providing and Fixing Wash Basin with hole for pillar taps with cast iron brackets including cutting holes in walls and making good the damages etc. complete as per specification. |
| 55 | Providing and Fixing pedestal for Wash Basin recessed at the back for the reception of pipes and fittings etc. complete as per specification. |
| 56 | Supplying all materials, labour, T&P and fixing bowl pattern urinal of Hindware/Jaquar/Parryware the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls land making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Hindware Flat back small urinal cat no-60001 starwhite, Size-26.5x31.5x44 cm. |
| 57 | Providing and Fixing floor traps of the following diameter of outlet of self cleaning design including cost of cutting and making good the walls and floors etc. complete as per specification. |
| 58 | Providing and Fixing PVC Waste pipe of the following diameter for Wash Basin and Sink including brass check nut etc complete as per specification. |
| 59 | Providing and Fixing Pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws,shanks and back nuts of the following diameter etc complete as per specification. |
| 60 | Providing and Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cock and supply mains for wash basin etc complete as per specification. |
| 61 | Providing andFixing CP brass Waste for wash basin and sink etc complete as per specification. |
| 62 | Providing and Fixing bevelled edge mirror of superior glass mounted on 6mm thick AC sheet or ply wood sheetand fixed to wooden plugs with CP brass screws and washers etc complete as per specification. |
| 63 | Providing and Fixing standard sized glass shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP brass screws etc complete as per specification. |
| 64 | Supplying & Fixing standard sized CP brass Towel Ring complete with CP brass brackets fixed to wooden plugs with CP brass screws etc complete as per specification. |
| 65 | Supplying & Fixing following items etc complete as per specification. |
| 66 | Modern L-Shape Executive Office Table(Size- 72\"x36\"x30\" with side table of size- 36\"x18\"x30\")with Drawers and Storage Shelves including all taxes etc. complete.(As Per Direction of the Engineer-in-Charge.) |
| 67 | Primium Leatherette Executive Office Revolving Chair With Fixed Armrests heavy Duty Chrome Base Executive Chair including all cost etc. complete.(As Per Direction of the Engineer-in-Charge.) |
| 68 | High quality metal four legs S.S. office study chair with armrest Metal including all cost etc. complete.(As Per Direction of the Engineer-in-Charge.) |
| 69 | GST (CGST+OGST) @ 18% of Sub-Total |
| 70 | Sub Total |
| 71 | GST (CGST+OGST) @ 18% of Sub-Total Please Enable Macros to View BoQ information |