|
| 1 | Taking down chowkats or frame exc 1.50 sqm each but not exc 4 sqm each with shutters (without taking off shutters from the frame ) complete all as specified and directed. |
| 2 | Demolition of brickwork or stone/boulders masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | Material and labour for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 all as specified and as directed. |
| 4 | Material and labour for brick work with sub class \"B\" bricks of modular size, straight or curved on plan to any radius in half brick work thick walls built in cement mortar (1:4) all as specified. |
| 5 | Material and labour forproviding RCC nominal mix 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ asin parapets/hand railing etc on walls, beams and colums in floors, roofs, landing, balconies, canopies, deck slab and in shelves, as directed including use of form work as necessary all as specified and as directed. |
| 6 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams to rough finished surface of concrete for flat complete all as specified and as directed. |
| 7 | Material and labour for Mild steel bars, 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 8 | Material and labour forMild steel bars6 to 8mm dia, cut to length, bent to shape required including bending or hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia complete as in reinforcement complete all as specified and as directed. |
| 9 | Material and labour for Mild steel bars, 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 10 | Taking down cement plastering or cement lime plaster of any description complete all as specified and as directed. |
| 11 | Material and labour for rendering 10mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth,without using extra cement complete all as specified and directed. |
| 12 | Material and labour for Rendering 15mm thick on fair faces of brick in cement mortar10 mm thick 1:6 and 5 mm tk 1:4 work or concrete surfaces shall be smooth without using extra cement complete all as specified and directed |
| 13 | Material and labour for glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm in vertical surface such as dados, set and jointed in neat cement slurry over and including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 14 | Material and labourfor Cement concrete in foundations, filling and mass concrete B1, 1:2:4 as in sunken with water proofing compound complete all as specified and directed |
| 15 | Material and Labour for non-skid coloured Ceramic tiles 7 to 8mm thick (square/rectangular)area of each tiles exceeding 0.11 Sqm but not exceeding 0.18sqm as on floors and jointed in neat cement slurry and in coloured cement to match, fixed over and including provision of screed bed/ bedding layer/backing coat of 15mm thick in CM 1:4 complete all as specified and directed. |
| 16 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) remaining serviceable tiles to stores and rubish off the premises all as specified and as directed. |
| 17 | Material and Labour for vitrified ceramic tiles 8-10 mm thick light shade area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed.NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 18 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed |
| 19 | Providing and fixing 35 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 20 | Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay),heavy,for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securingpurlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 21 | M&L for cement concrete 1:3:6 Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edgesin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 22 | Supply and fix 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed. |
| 23 | Supply and Fix 200mm long Brass barrel tower bolt with cast or sheet barrel rolled or cast boltall as specified and as directedby Eng-in-charge. |
| 24 | Supply and fix 150 mm long D type Extruded brass handles, fabricated type polished complete all as specified and directed |
| 25 | Supply and fixing for 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed |
| 26 | Providing and applying plaster of paris putty of 1 mm thickness over plastered /ols untreated surface to prepare the surface even and smooth. complete all as specified and directed |
| 27 | Material and labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new work or old un decorated surfaces complete all as specified and as directed. |
| 28 | Material and labour for preparation of new surfaces on wall and applying two coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistant, dirt resistant exterior paint of required shade(company depot tinted) with silicon additives @ 1.43 Litre/10 Sqm over and includingpriming coat of exterior primer applied @ 0.90 Litre per 10 Sqmover new surface complete all as specified and as directed. |
| 29 | Supplying and laying 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded polypropylenerandom fittings fixed complete to walls, ceilings or infloors etc after taking out unserviceable pipe including making good disturbed surfaces complete all as specified and directed. |
| 30 | Supplying and laying 25mm 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded polypropylenerandom fittings fixed complete to walls, ceilings or infloors etc after taking out unserviceable pipe including making good disturbed surfaces complete all as specified and directed. |
| 31 | Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 75mm dia laid in floor or fixed to wall as in soil, waste and rain water pipe complete all as specified and as directed. |
| 32 | Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia laid in floor or fixed to wall as in soil, waste and rain water pipe complete all as specified and as directed. |
| 33 | Supply and FixPVC (SWR) bends any radius 75mm bore dia with access door complete all as specified and as directed. |
| 34 | Supply and Fix PVC (SWR) bends any radius 110mm bore dia with access door complete all as specified and as directed. |
| 35 | Supply and Fix PVC (SWR) junction single 110 mm bore, (single T) equal or unequal with access door complete all as specified and as directed. |
| 36 | Supply and fix PVC (SWR) Tee (single Tee)75mm dia equal or unequal with access door complete all as specified and as directed. |
| 37 | Supply & FixPVC (SWR) 75 mm dia of outlet, multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 38 | Supply and fixPVC (SWR) vent cowl 75 mm bore equal or unequal complete all as specified and directed. |
| 39 | Supply and fix PVC (SWR) \"S\"trap 110mm bore for EWC/IWC complete all as specified and directed. |
| 40 | Supply and Fixing single piece china wash down water closet , Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Conversion Bend, Fixing Accessories And Accessories Set, Size: 380x645x805mm, S Trap-250mm Make: jaquar Cat No. OPS-WHT-15753NS250UFSMZ |
| 41 | Supply and Fixing wash hand basin table top type Thin Rim Table Top Basin, Shape - Round, fixed on granite top grooving and cutting if required in size of Size: 455x455x110 mm Make: Jaquar cat No JDS-WHT-25939or Equivalent complete allas specified and directed by Engr-in-Charge. |
| 42 | Supply and fix single lever Basin mixer without popup waste system with 450mm long braided hosesMake Jaquar Cat No. VGP-81011B complete allas specified and directed by Engr-in-Charge. |
| 43 | Supply and fixing6 mmthick bevelled edged mirror of any size and descripiton fixed with stainless steel spacer complete all as specified and directed. |
| 44 | Supply and fixing Jaquar ALI-CHR-85079K, ALD-079 Brass Complete Diverter Set, Silver, Chrome finish, Brass;complete allas specified and directed by Engr-in-Charge. |
| 45 | Supply and fix Jaquar Bath Tub Spout Faucet with Button Attachment for Hand Shower | Includes Wall Flange | Chrome Finish for Modern Bathrooms complete allas specified and directed by Engr-in-Charge |
| 46 | Supply and fix Hand Shower 95mm Round Shape Multi Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System HSH-CHR-1739 complete allas specified and directed by Engr-in-Charge. |
| 47 | Supply and fix Jaquar Overhead Shower OHS-1639 300x300mm or Equivalant square shape single flow and 450 to 600 mm shivel(body & face plate stainless steel with chrome finish) with rubit cleaning system complete allas specified and directed by Engr-in-Charge |
| 48 | Supply and fix Hand showerin repairs ( Health faucet) with 8mm dia 1.2 mtr long flexible tube and wall hook complete all as specified and as directedMake: Jaquar Cat part No. ALD-CHR-573 or equivalent inParryware/Hindware/CERA |
| 49 | Supply and fix chromiumplated toilet Roll holder fixed on walls complete all as specified and directed. (Make: JaquarCat No: CAN-1151N) complete allas specified and directed by Engr-in-Charge. |
| 50 | Supply and fix angle valve with wall flange 15 mm bore cast copper alloy fancy type, cromium plated with cupcomplete all a specified and directed. (Make: Jaquar Cat No: VGP-81053) or eqivalant complete allas specified and directed by Engr-in-Charge. |
| 51 | Supply & Fixing chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed (Make: Jaquar Cat No:VGB-81037) or eqivalant. |
| 52 | Supply and fixingtowel rack 600 mm long with lower hanger, stainless steel fixed to walls with screws and fisher complete all as specified and directed. (Make: Jaquar Cat No. CAN-11818) or equivalent |
| 53 | Supply and fixing CP brass towel ring fixed with and incl CP brass screws andcomplete all a specified and directed (Make: JaquarCat No: CAN-1121BN) or equivalent. |
| 54 | Supply and fix Soap dish fixed with and incl CP brass screws complete all a specified and directed (Make: JaquarCat No: ACN-1131N) orequivalant |
| 55 | Supply and fix Soap dispensor fixed with and incl CP brass screws complete all a specified and directed (Make: Jaquar (Kubix) Cat No: CAN-1135N) or equivalent. |
| 56 | Supply and fix chromimum plated brass 32 mmclick clake waste coupling for table top wash hand basin half or full thread fixed complete all as specified and directed. (Make: Jaquar Cat No. ALD-729L130) or equivalent. |
| 57 | Supply and fix 32 mm bore brass chromium plated bottle traps for wash basins, sinks, urinals etc with inlet and outlet screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed. |
| 58 | Supply and fix PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed. (Make: Jaquar Cat No. ALD-8058) or equivalent. |
| 59 | Supply and fix Glass corner sutable size for bath Room with Stainless steel guard complete all as specified and directed. |
| 60 | Supply and fix 18/19 mm thick PVC solid double side prelam celluca board/MDF board with lamination of approved colour fixed with screws as in modular kitchen cabinets/cupboards complete all as specified and directed by Engr-in-Charge. |
| 61 | Material and labour for 20mm thick rubby pink or Rubby red granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granitecomplete all as specifeid and directed. |
| 62 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 63 | Supply and fix MS bright polished auto hinges suitable for cupboard/cabinet fixed with screws as per manufacture instructions complete all as specified and directed by Engr-in-Charge |
| 64 | Supply and fix 100mm long extruded brass handles, fabricated type polishedcomplete all as specified and directed by Engr-in-Charge. |
| 65 | Supply and fixing Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms)all as specified and as directed. |
| 66 | Providing and fixing Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately),withfibre glass sheet fixed where required for lighting arrangements,Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedNote: Rate is inclusieve of scaffolding and necessary safety arrangements |
| 67 | Supply and fixing harrison rail, mild steel, chromium plated nwith fixing bracket, stops, rollers etc complete all as specified and as directed. |
| 68 | S&F18/19 mm thick double side prelaminated celukaPVC solid board or double side prelaminated WPC (Wood Plastic Composite)board of approved colour fixed with screws and ss cleats as inkitchen cabinets/cupboards cutting and making required size and shape at site including lipping portion match with laminated colour complete all as specified and directed. |
| 69 | Supply and fixing Stainless steel Auto hinges polished bright suitable for cupboard/cabinet complete all as specified and directed. |
| 70 | Supply and fix30mm width of flaps (when open) Continuous piano hingers brass and for fixing of cupboard and cabinet shutters with brass screws complete all as specified and directed. |
| 71 | Supply and fixmagnetic catcher with 8mm dia ball and brass body and stricking plate complete all as specified and directed. |
| 72 | Taking down shutter of any description exc 1 sqm but not exc 2 sqm in each panes and refixing the same opening complete all as specified and directed. |
| 73 | Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators, sub main wiring etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. |
| 74 | Taking down of Split type Air Conditioner of any capacity 1.5/2 TR from existing location incl removal of outdoor unit by opening all electrical connection and suction & discharge line connection carefully & removing materials to store for keeping in safe custody for reuse at site. Filling the opening of old location with cement mortar, applying white wash on wall with matching with existing colour of the site. Refixing, installation of Split type Air Conditioner of any capacity 1.5/2 TRby filling of refrigerant, fixing of new bracket for installation of outdoor unit, fixing of suction and discharge copper tubes with replacement of insulation of suction & discharge line and making holes for passing of suction & discharge line through brick wall incl well finish with cement mortar, applying white wash, colour wash, distemper etc on wall to match with existing colour of the adjacent surface at new location, etc. complete all as specified and directed by Engineer-in Charge. |
| 75 | Material and labour for point wiring with PVC insulated unsheathed, multistranded FRLS copper conductor colour coded with cable 1.5 Sqmm size, 1100 volts grade, confirming to IS:694, concealed wiring drawn through and including PVC conduit including all accessories such as bend, Tee, junction boxes, elbows etc in new suitable size sunken galvanized modular boxes suitable for the approved switches /sockets to accomedate, including one coat of synthetic enamel black paint suitable for modular switch/sockets including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common eatrh and connected to earth dolly and earth terminal box for the following and making good the disturbed surfaces to match with finishes of existing surfaces complete all as specified and directed:-(a) onelight point or fan point controlled by one switch 5 Amps. |
| 76 | (b) One 3pin socket outlet 5 Ampsonindependent board. |
| 77 | All as per Item No. 75 above but with 4 sq mm PVC insulated copper conductor cable(FR) including 4 sq mmPVC copper conductor used as earth wirefor power point on independent board for One 3 pin socket outlet, 15 Amps. |
| 78 | Supply and Fix Modular Switch 1 way, 6 Amps, 1 module complete all as specified and as directed. |
| 79 | Supply and Fix Modular Socket, 6 A- 2/3 pin combined 2 module complete all as specified and as directed. |
| 80 | Supply only SwitchSocket Combination2 in 1, 5 Amps /16 Ampsflushtype230 Volts, AC, with ISI mark complete all as specified and directed. |
| 81 | Supply and fix Modular fan regulator step type, 120 Watt, 2 Module complete all as specified and directed. |
| 82 | Supply and fix in repairs single pole andneutral enclouser with a two pin andearth plug and socketcomplete with and including one MCB single pole 20 Amps complete all as specified and directed. |
| 83 | Supply and fixing exhaust fan made of study engineering plastic complete with louvers shutter, voltage 230V, 50 Hz , RPM 1200 , copper winding of sweep 250mm complete all a specified and directed. |
| 84 | Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM service value 6.00 BEE. Five Star rated with brushless direc current motor (BLDC) complete all as specified and as directed. |
| 85 | Supply and fix LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make: Havells /Philips/Bajaj. |
| 86 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Crompton /Philips/Havells |
| 87 | Supply and install , testing of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Lit 240 volts,BEE 5 star rated with digital display, remote control with all necessary supports for fixing and accessories including connecting to electrical/plumbing connection required at site complete all specified and directed. Make : Havells/Venus/Godrej/Racold/Usha |
| 88 | Supply and fix MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. |
| 89 | Supply and fix MCB SPN, 240Volts, 40 to 63 Amps rating 240 V, breaking capacity of 10 KA, \"C\" Curve complete all specified and as directed. |
| 90 | Supply and fixDistribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommerDouble door, flush to wall complete all as specified and directed . |
| 91 | Material and labour for sub main wiring in replacement with 2 runs of 6 sqmm FRLS single core multistranded copper conductor PVC insulated andunsheatheddrawn through and including PVC casing and caping of suitable size with all accessories such as bends,Tee, junction boxes, elbow etc fixed to walls/ceiling including 1 run of 6 Sqmm copper (insulated) FRLS cable as earth continuity conductor including complete all as specified and as directed. Note : 2 runs of cable, 1 run of earth wire and one run of casing and caping shall be measured as one length all as specified and directed. |
| 92 | Material and labour for extension of ceiling fan Down rod of size 20 mm dia medium grade steel tub, for existing ceiling fan up to a length suitable to comes just below the false ciling including painting of two coat synthetic enamel paint over a coat of red oxide primer including necessary welding and drilling works complete all as specified and directed. |
| 93 | Earthing with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized ironsteel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1(using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completionincluding taking out old earthing all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 15mm dia light grade GI protection pipe for earth lead etc., complete |
| 94 | Schedule of Credit (Minus) Rs.2117.50 NOTE: Bidder shall insert credit amount of Rs. 2117.50as ratein Green field under Col-13. |
