Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-02-2026 | CORRIGUNDUM | BOQ | 28-02-2026 |
| Sl. No. | Item Description |
| 1 | B/R Portion:- Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 2 | 5mm thick cement plaster rendering in CM 1:3 on fair faces of concrete surfaces & finishing the surface even and smoothin ceiling, chajja in doublestorey building etc without using extra cement,complete all as specified and directed. |
| 3 | 15mm thick rendering in CM 1:4 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | 15mm thick rendering in CM 1:6 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | Preparation of new plastered surface of Wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 6 | Complete removal of existing treatment on wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 7 | Preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed |
| 8 | Complete removal of existing treatment and preparing of plastered or unplastered surfaces of walls and applying two coats of oil emulsion distempercomplete all as specified and directed |
| 9 | Preparation of new plastered or unplastered surfaces and applying two coats of distemper oil emulsion on ceiling sufraces complete all as specified and directed. |
| 10 | Preparation of old plastered or unplastered surfaces and applying one coat of distemper oil emulsion on ceiling sufraces complete all as specified and directed. |
| 11 | Preparation of old painted steel or iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 13 | Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 14 | Demolition of cement concrete (unreinforced) as in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 16 | Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and directed. |
| 17 | Machine cut pre polished kota stone slab flooring 18- 20 mm thick as in floor with & including white marble border of 150mm wide, 18-20mm thick laid over & including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 18 | Machine cut pre polished Kota stone 18-20mm thick as in riser of steps, skirting, dado and pillar, fixed over & including cement plaster 15mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment tomatch the shade of the kota stone including rubbing and polishing complete all as specified and directed. |
| 19 | Floor grinding and polishing granite finish to existing kota stone floors including necessary repairs if reqd after each cuttinng i.e filling of joints with white cement, araldite and pigments complete all as specified and directed by GE. |
| 20 | Floor grinding and polishing granite finish to existing kota stone in vertical surfaces including necessary repairs if required after each cuttinng i.e filling of joints with white cement, araldite and pigments complete all as specified and directed by GE. |
| 21 | Vitrified ceramic tiles 8-10mm thick (square/ rectangular), light shade, polished, area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the clour of tile, laid over and including15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 22 | All as per item 21 above but on vertical surfaces like dado/skirting with 10 mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 23 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 24 | Glazed ceramic coloured tiles 450mmx350mm x7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and including 10mm thick rendering in cement mortar 1:3, complete all as specified and directed by Engr-In-Charge. |
| 25 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in levelling course to floor surface, finishing surface even and fair, complete all as specified and directed. |
| 26 | 75 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filled with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed |
| 27 | Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing , laid in floors over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 28 | Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing,fixed over & including 15mm thick rendering in CM 1:3 complete all as specified and directed. |
| 29 | Taking down chowkhats or framesexc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from frame)complete all as specified and directed |
| 30 | Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 31 | Taking down shutters of any description exc 2.0 sqm each complete all as specified and directed. |
| 32 | Aluminium frame powder coated of any colour (Thickness of powder coating not less than 50 micron) for doors,windows, ventilatorswith one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 33 | Aluminium powder coated of any colour door shutters (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, suitable handles 2 Nos in each door, hingestype B-21 100mm long, with similar snap beading, screws etc. complete all as specified and directed. |
| 34 | Aluminium powder coated of any colourwindow shutters (Thickness of powder coating not less than 50 micron) , fixed type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., suitable handles 2 Nos in each door, hingestype B-21 100mm long complete all as specified and directed. |
| 35 | 12mm thick toughned glass with double action floor spring, partitions, automatic doors and similar work including cutting to shape, drilling holes as required (ornamental stainless steel handle 200mm -02 Nos in each leaf) including embossing logo/designin 2 D pattern by etching complete all as specified and directed. Note:-Design and pattern shall be approved by GE. |
| 36 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 37 | Sheet glass,5.5 mm thick ordinary quality glazing with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, exc 0.5 sq. m each pane, fixed in door and window complete all as specified and directed. |
| 38 | Supply and fixing in repairs 4mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 39 | Supply and fixing in repairs Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples or wooden beading complete allas specified and directed. |
| 40 | Supply and fixing in repairsVitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. incl 10 litres Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle includingpipe & brackets complete in all respect all as specified and good to including jointing to existing pipe of floor of size 100mm complete all as specified and as directed. |
| 41 | Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 42 | Supply and fixing in repairs, Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flushpipe and waste pipe),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified. |
| 43 | 20mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed for urinal complete all as specified and directed. |
| 44 | Supply & fixed in repair, Vitreous china wash basin, counter type oval shape size 550 x 400 mm excl taps, wastechain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified. |
| 45 | 15mm brass chromium plated basin mixerfor mixing hot & cold water screwed down for iron pipe fixed in repair, complete all as specified. |
| 46 | 15mm bore Stop valve/angle cock, cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified. |
| 47 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 48 | PVC connection 15mm size with CP nuts on both ends of length 600mm fixed in repairs, complete all as specified and directed. |
| 49 | Supply & fixing in repairsGrating doom 100 mm dia with waste hole of PTMT (minimum weight - 40 gms) complete all as specified and directed. |
| 50 | Supply & fixing in repairs Toilet paper holder of brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed |
| 51 | Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed |
| 52 | Soap dish of CP fixed with and including chromium plated brass screws and wooden/plastic plugs, fixed in repairs, all as specified and directed. |
| 53 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 54 | Tubular towel rail 60cm long 20mm dia aluminium anodised incl necessary brackets, fixed in repair, complete all as specified and directed. |
| 55 | Dismantling of cast iron drain pipe of any dia set in cement mortar/concrete and taking out of trenches if required, complete all as specifie and directed. |
| 56 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified and directed. |
| 57 | PVC (SWR) pipes 75mm dia, Type B, any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 58 | PVC (SWR) pipes 75mm dia, Type B, any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 59 | PVC (SWR) pipes 110mm dia, Type B, any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 60 | PVC (SWR) pipes 110mm dia, Type B, any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 61 | PVC (SWR) bends any radius 75mm bore fixed, complete all as specified and directed. |
| 62 | PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed. |
| 63 | PVC(SWR) branch piece, single (single Y) equal or unequal 75mm bore fixed in repair, complete all as specified and directed. |
| 64 | PVC(SWR) branch piece, single (single Y) equal or unequal 110mm bore fixed in repair, complete all as specified and directed. |
| 65 | PVC (SWR) junction single (single T) 75mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 66 | PVC (SWR) junction single (single T) 110mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 67 | PVC (SWR) vent cowl for 75mm dia fixed in repair, all as specified. |
| 68 | Dismantling water tanks of any description exc 500 & nexc1000 litre capacityand removing from site complete all as specified and directed. |
| 69 | Rotational moulded polyethylene water storage tankstriple layer (Cylindrical vertical with closed top), ISI marked hoisted and fixed in position all as spd in SSR Pt-I,of capacity1000 Ltrs including making necessary connection and fittings, complete all as specified and as directed. |
| 70 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed, complete all as specified and directed. |
| 71 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified. |
| 72 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 73 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 74 | 16mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 75 | 20mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 76 | Taking down existing tarfelt including tiles and Demolition of concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 50m and n. exc. 100m incl roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified & directed. |
| 77 | 40mm thick (minimum thickness) PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and finishing surface smooth and even to maintain levelling on existing slab complete all as specified and directed. |
| 78 | 15mm thick screed bed or bedding layers in cement mortar 1:4over green surface of concrete on roof surfaces for laying APP based polymeric membrane including mixing with water proofing compound @ 3% or as per manufacturers instruction complete all as specified and as directed. NOTE : Polymeric membrane & Water proofing compound shall be measured and paid separately. |
| 79 | Supply onlly liquid water proofing compound of Dr. Fixit or equivalent make complete all as specified and directed. |
| 80 | Water proofing treatrment to RCC roof slab, includingparapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bitumenous primer @ 0.4 ltrs per Sqmover plastered surfaces of roof including parapet surface.(b)Over the priming coat ,applying a tack coat of bitumen @ 1.2 kg/sqm of paving grade butumen Vg 20 (60-80 penetration) and providing APP based polymeric membrane minimum weighing 3.00 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 200 gms/sqm) laid on bitumen surface by forced application and inserting in groove above 15cm from roof in parapet including minimum overlap of 100mm and 75mm atend and sides of the polymeric membrane respectively and sealed all overlaps and joints with suitable adhesive as per manufacturer\"s instruction and including applying bitumen Vg20 paving grade (60 to 80 penetration) @1.20Kg/Sqm & blinded with fine dry sand @0.50Kg/Sqm including testing. (Note:- (i)Laying of APP bassed polymeric membrane shall bedone with torch application methed or as per manufacturer\"s instructions.(ii)APP based polymeric membrane shall be \"Dr Fixit\" manufacturered by M/S Pidilite Industriesor \"MOPLY FP 3MM\" manufactured by M/S Texsa India Limited and \"Hyperplus\" by IWL India Limited |
| 81 | Anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and as directed. |
| 82 | Hollow PVC Wall Lining consisting of 5mm thick but wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 83 | Exposed metal frame ceilinggrid made of Galvanised Iron as per specification and drawing with hollow PVC ceiling consisting of 5-6mm thick but wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site complete all as specified and directed. |
| 84 | Dismantling and re-fixing of wooden flooring any type including tilting fillet and fixed with necessary adhesive complete in another site all as specified and directed by Engineer-in-Charge. |
| 85 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets all as specified & directed. |
| 86 | 19mm thick Plywood (Action Tessa termite proof), grade BWP (boiling water proof) plywood best quality, type BB, fixed with gypsum screws to timber frame including polishing to beading complete all as specified and directed. |
| 87 | 9mm thick Plywood (Action Tessa termite proof), grade BWP (boiling water proof) plywood best quality, type BB, fixed with gypsum screws to timber frame including polishing to beading complete all as specified and directed. |
| 88 | Magnetic catchers fixed in cabnets with screws all as specified and directed |
| 89 | Stainless steel handles 200 mm long fixed to wooden shutters all as specified and directed |
| 90 | Decorative laminate 0.90 mm type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 91 | Continuous (piano) hinges of brass bright finish or electrogalvanised with width of flap 30 mm complete all as specified and directed. |
| 92 | Chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adhessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :3 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufactures instructions and finally applying 10 to 15 mm thick cement plaster over gunite surfaces ofrequired thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs,chajjas,fins,facias ,parapets ,columns and beams etc complete including necessary scaffolding ,shuttering necessarychased to brick work or RCC members at any height of buildings incl removing of small trees shrubs etc all as specified and directed.Note: 1.Steel welded mesh to be welded with the existing reinforcement.The cost of welded mesh is to be welded with the existing re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.2. The work shall be got executed through agency having experetise in this work. Contractor shall submit the name of such expert agencies along with proof their experience for approval of GE. |
| 93 | Preparation of newly plastered surfaces and applying three coats of white wash on wall surfaces to give even and smooth finish complete all as specified and directed. |
| 94 | Preparation of old plastered surfaces and applying two coats of white wash on wall surfaces to give even and smooth finish complete all as specified and directed. |
| 95 | Complete removal of existing treatment on ceiling and applying two coats of white wash on ceiling surfaces complete all as specified and directed. |
| 96 | Preparation of new plastered surface and applying three coats of white wash on ceiling surfaces complete all as specified and directed. |
| 97 | Polished Vitrified ceramic tiles 8-10mm thick (square/ rectangular), light shade, polished area of each tiles not exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the clour of tile on 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 98 | Polished Vitrified ceramic tiles 8-10mm thick (square/ rectangular), light shade, polished area of each tiles not exceeding 0.36sqm, in vertical surface like dados,skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the clour of tile on 15mm thick screed bed in CM 1:3, complete all as specified and directed. |
| 99 | Aluminium powder coated of any colour ventilator shutter (Thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 100 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 101 | Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, \"C\" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & directed. |
| 102 | Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified and directed. |
| 103 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 104 | Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed. |
| 105 | 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 106 | Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 107 | 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, including hacking out old broken glass complete all as specified and directed. |
| 108 | Supply and fixing in repair 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, including hacking out old broken glass complete all as specified and directed. |
| 109 | Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples or wooden beading complete allas specified and directed. |
| 110 | Taking down old rolling shutters of any description and supply and fixing of steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type, thickness of laths is 1.25 mm complete all as specified and directed. |
| 111 | Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 112 | Preparation of old painted wooden or wood based surfaces of any description including knotting and stopping as required and applying one coat of synthetic enamel paint, complete all as specified. |
| 113 | Preparation of new or previously untreated steel or iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 114 | Applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces n.exc 10cm width or girth, complete all as specified and directed. |
| 115 | Vitreous china Wash hand basin, white, flat back of size 630x450mm,excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand, 32mm PVC waste pipe and brass chromium plated waste coupling, complete all as specified. |
| 116 | 600mm x 450mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 117 | 15mm brass chromium plated mixer fancy type with telephonic shower for mixing hot & cold water screwed down for iron pipe fixed in repair, complete all as specified. |
| 118 | PVC Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 119 | PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repair, complete all as specified and directed. |
| 120 | PVC (SWR) bends any radius 100mm bore fixed, complete all as specified and directed. |
| 121 | 100mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed in repair, complete all as specified and directed. |
| 122 | PVC (SWR) vent cowl for 110mm dia fixed in repair, all as specified. |
| 123 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls , ceilings or laid in floors, complete all as specified and directed. |
| 124 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 125 | Solid PVC Wall Lining consisting of 5mm thick but wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 126 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 127 | Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 128 | Plain cement concrete 1:3:6 type C-1(using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary formwork, complete all as specified and directed. |
| 129 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified and directed. |
| 130 | Endura Ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 131 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed. |
| 132 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed. |
| 133 | Sand cushioning under interlocking paver block complete all as specified and directed. |
| 134 | Plain cement Concrete 1:3:6 type-B1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks, benching and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified. |
| 135 | E/M PORTION:-Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket,ceiling rose, celing fan etc complete all as specified and directed. |
| 136 | Point wiring with 2x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and 1x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of approporiate size and all requisite accessories such as PVC elbow, Tee, collars, bends etc with PVC terminals box& cover for mounting switches, sockets, fan regulator etc complete all as specified and as directed for the following:- |
| 137 | One light/fan point controlled by one switch complete all as specified and directed. |
| 138 | One 5 Pin, 6 amp socket outlet on same board complete all as specified and directed. |
| 139 | One 5 Pin, 6 amp socket outlet on independent board complete all as specified and directed. |
| 140 | All as per item No. 136 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 141 | Ceiling rose, 3 phase,bakelite 65x50mm two or three therminals complete all as specified and directed. |
| 142 | Modular type 6 amp one way switch, 1 module complete all as specified and directed. |
| 143 | Switch bell push flush type 5 Amp , modular type complete all as specified and directed. |
| 144 | Electric bell ding dong type 230 volts AC supply complete all as specified and directed by Engineer-in-Charge. |
| 145 | Modular type 16 amp one way switch, 1 module complete all as specified and directed. |
| 146 | Modular socket 6A/16A - 2/3 pin combined 2 module, complete all asspecified and directed by Engr-in-charge. |
| 147 | Modular metal box and modular white cover plate with frame 2Module complete all as specified and directed. |
| 148 | Modular metal box and modular white cover plate with frame 3Module complete all as specified and directed. |
| 149 | Modular metal box and modular white cover plate with frame 4Module complete all as specified and directed. |
| 150 | Modular metal box and modular white cover plate with frame 6Module complete all as specified and directed. |
| 151 | Modular metal box and modular white cover plate with frame 8 Module complete all as specified and directed. |
| 152 | Modular metal box and modular white cover plate with frame 10 module complete all as specified and directed. |
| 153 | Modular metal box and modular white cover plate with frame 12 Module complete all as specified and directed. |
| 154 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 155 | Invert Led Lamp , CDL 12 Watt , B22 base all as specified and as directed. |
| 156 | Supply and fix in repairs Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specifiedand as directed. |
| 157 | Supply and fixing in replacement LED lights fitting 1x 20W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 158 | Supply and fixing in replacementLED tube light fittings mirror type with hight output diffuser 1 feet, 5/6 watt 220V AC, decorative type with driver holder and LED lamp including connectiong up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 159 | S&F in repair ceiling mounting LED light fittings luminaire 600mmx600mm, 35/36 watt, 220 v, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed. |
| 160 | S&FLED Wall light fittings 2 N x 9 W LED Lamp/2 N x 7.5 W LED filament lamp,Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable withLED lamp B22 base.complete with all accessories internally per wired including andconnecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified anddirected. |
| 161 | Supply and fixing in repair building security light fittings, 35 watt LED,230v, AC out door type pre-wired,IP-65/66 protection, with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket complete all as directed. |
| 162 | Supply Installation, testing and fixing of 75 cm wide wall-mounted kitchen chimeny with 1500 Cum/Hrs suction capacity, complete with energy efficient BLDC motor for low power consumption and quiet operation. The chimney sensor shall be provided with motion sensor control for handsfree ON/OFF and speed operation and auto-clean technology with oil collector for easy maintenance and longer motor life. The chimney shall be wall mounted, complete with all necessary mounting brackets, fasteners, electrical connections, ducting accessories (as required) , testing and commissioning, complete in all respects and as directed by Engineer-in-Charge. Make:- Hindware or equivalent as per specified in zonal specification |
| 163 | S&F Sheet Metal enclosure TPN vertical suitable of TP/FP G frame MCCB of cap upto 100 Amps, double door of 4 ways, built in bus bars complete suitable for 415 volts, AC, 50 HZ complete and as directed. Make : L&T/Legrand/Standard/havells. |
| 164 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 165 | Supply and Fixing in repairPlug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 20 Amps MCB SP complete as specified anddirected |
| 166 | Supply and Fixing in repair MCBs, TPN,415 volts, breaking capacity 10 KA, rating 20-63 amps, complete all as specified and as directed. |
| 167 | Supply and Fixing in repair MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps,complete all as specified and as directed. |
| 168 | Supply and fixing in repair MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed. |
| 169 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit notless than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 170 | Supply and fix in repair sub main wiring with single core cable 2 x 10 sq mm FRLSinsulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing capingmedium grade alongwith 1x6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including taking down old unsv sub main wiring of any type, complete all as specified and directed.Note:-2 wire of 10sqmm, 1 wire of 6 sqmm and one run of pvc casing caping shall be measured as one unit. |
| 171 | Supply and fix in repair sub main wiring with single core cable 2 x 6 sq mm FRLSinsulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing capingmedium grade alongwith 1x4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including taking down old unsv sub main wiring of any type, complete all as specified and directed.Note:-2 wire of 6sqmm, 1 wire of 4sqmm and one run of pvc casing caping shall be measured as one unit. |
| 172 | Supply, laying, jointing and testing LT XLPE and PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3 core complete all as specified and directed. |
| 173 | Exc in trenches not exc. 1.5 m wide andexc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed. |
| 174 | Returning, filling in including spreading, leveling, watering and well ramming excavated soilin layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
| 175 | Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed. |
| 176 | Supply and fixing DWC HDPE pipe for protection of power cable (orange in colour) of size 50 mm dia complete with fittings and including cutting, jointing and clamping all as specified and directed. |
| 177 | Piano Type switch , 1 way, 6 amp, complete all as specified and directed. |
| 178 | Switch socket combination 2 in 1 , 5 pin 16 Amp, flush type complete all as specified and directed. |
| 179 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 180 | M&L in repair incl taking out old unsv ceiling fan from site of capacity 1200/1400 mm sweep andreplacement with and incl new BLDC ceiling fan of 1200 mm sweep, 230 V, 50 hzincl all connecting accessories complete all as directed by engineer-in-charge. |
| 181 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 182 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm incl all connecting accessories complete all as specified and directed. |
| 183 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armouredwith galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
