Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of Lime concrete in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Taking down chowkats or frames areanot exceeding 1.50 Sqm(w/o taking off shutters from frames) and removing from site, complete all as specified and directed. |
| 4 | Taking down chowkats or frames area exceeding 1.50 Sqm andnot exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, complete all as specified and directed. |
| 5 | M & L for double charged vitrified dark tiles 8-10 mm thick size of each tile 800x800mm in floor etc setand jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:6) complete all as specified and directed. |
| 6 | M & L for double charged vitrifieddark tiles in vertical surface such as skirting/dados etc 8-10 mm thicksize of each tile 800x800mm etcset and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 7 | Material & Labour for Non - skid coloured ceramic tiles 400x400x 7 to 8 mm thick (square), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed. |
| 8 | Material & Labour for Coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed. |
| 9 | Material and labour for Machine cut kota stone slab flooring of size 550*550*18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, over and including cement screed bed 15 mm thick in cement mortar (1:6) baseincluding rubbing and mirror polishing, and half nose moulding (bull nosing) etc, complete all as specified and directed. |
| 10 | All as per item no 9.00 above but pre-polished kota stone as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar (1:4) onbrick work or concrete surfaces, complete all as specified and directed. |
| 11 | Material & Labour for Granite work (Jet/Telephonic Black) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basins, urinal partitions etc. and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. |
| 12 | Material & Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished without using extra cement complete. Note : Joints 12 mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection complete all as specified and directed. |
| 13 | M&L PCC (1:4:8) Type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete and sub base surface finished even & fair complete all as specified and directed. . |
| 14 | Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed. |
| 15 | Dismantling Asbestos cement (corrugated of semicorrugated etc), any gauge, thickness,roof coverings complete all as specified and directed. |
| 16 | Supply and fixing pre-painted galvatume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.50 mm thick of any colourhaving 550 Mpa tensile strength as in roof covering/cladding and fixed with self tappingscrews, complete all as specified and directed. |
| 17 | Supply and fixing pre-painted galvatume aluminium zinc coating (AZ-150) GI based plain steel sheet 0.50 mm thick of any colourhaving 550 Mpa tensile strength as in roof covering/cladding and fixed with self tappingscrews, complete all as specified and directed. |
| 18 | Dismantling unframed timber fillets,rails,posts,rafters,purlins etc under 40 sqcm in section complete all as specified and directed. |
| 19 | Supply and fixing steel work in tublar truss including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A all as specified and directed. |
| 20 | Supplyand fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, complete all as specified and directed.Note : Material test certificate and authentication should be compoulsory provided by the manufacturing company |
| 21 | Supplyand fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, complete all as specified and directed.Note : Material test certificate and authentication should be compoulsory provided by the manufacturing company |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed.Note : Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 23 | S&F for 2nd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedsupplied and fitted to chowkats complete all as specified and directed. |
| 24 | Supply and fixing IInd class (hollock) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 25 | S&Ffactory made Steel window/ ventilator glazed & gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary cooler arrangement in window & guard barsall as shown in drg No. CEBZ/TD/14/11 sh No 1/7 to 7/7 & complete all as specified and directed. |
| 26 | Supply and fixing for 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not excc 0.5 Sqm in each pane complete all as specified and as directed. |
| 27 | Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 28 | Supply & fixed150 mm long 10mm dia Extruded aluminiumalloy handles, fabricatedtype anodised complete all as specified and directed. |
| 29 | Supply & fixed100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 30 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 31 | S&F double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber all as specified and directed. |
| 32 | Supply & fixedMS helical door spring 300mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete all as specified and directed. |
| 33 | Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple orfixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed. |
| 34 | Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample complete all as specified and directed. |
| 35 | Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair complete all as specified and directed. |
| 36 | Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repair complete all as specified and directed. |
| 37 | Supply & fixing of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods22 to 25mm dia as per sample as in repair complete all as specified and directed. |
| 38 | Demolition ofbrickwork or stone/boulder masanory,laid dry below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 39 | Material & Labour brick work with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6 complete all as specified and directed. |
| 40 | Material & Labourfor Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 41 | Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 42 | M & L for rough cast plaster using crushed stone of size between 6 mm to 10 mm, coarse sand and cement mixed in the ratio of (1:1:1) over and including rendering coat of 15 mm thick on fair faces of brick work or concrete surfaces or stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:4 finished even and fair including two coats of cement base paint complete all as specified and directed. |
| 43 | Material andlabour5 mm thick cement plaster in cement mortar 1:3 on ceiling,finished even and smooth without using extra cement complete all as specified and directed. |
| 44 | Material andlabour for 15mm thick rendering in cement mortar (1:6) onbrick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 45 | Material andLabour for 15mm thick rendering on fair faces of brick work/stone masonry, concrete surfaces (external walls) or stone walls upto tripple storey bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions,finished even and fair, complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 46 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed. |
| 47 | Material and labour for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 48 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper paint over a coat of 1mm thick putty complete all as specified and directed. |
| 49 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 50 | M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on walls over a coat of 1mm thick puttycomplete all as specified and directed. |
| 51 | M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applyingTwo or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 52 | M&L for two coat of synthetic enamel painting to new wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer complete allas specified and directed. |
| 53 | M&L for two coat of synthetic enamel painting to steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete allas specified and directed. |
| 54 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed. |
| 55 | M&L for 10mm thick rendering on concrete surfaces of roof projection cornices & chajja etc finished fair and even without using extra cement mixed with WPC in CM 1:4 including and taking down existing cement plaster with necessary arrangements to work on roof projection, cornice & chajja etc complete all as specified and directed. |
| 56 | Dismantling boarding, any description, fixed in any positionwith nails complete all as specified and directed. |
| 57 | Fabrication & fittingwith cabinet / shelves & wardrobe / cupboard made out nof 18mm thick (one side decorative lamination & other side balancing lamination ) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery basket with handles door shutters all as specified and directed. Note : PVC sheet, fittings & fixture will be measured and paid separately. |
| 58 | Supply only 18mm thick (one side decorative lamination & other side balancing lamination sheet) solid PVC board of make : Rajshree or equivalent all as specified and approved by Accepting Officer with cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed. |
| 59 | S&F in repair stainless steel Soft Close hinge with assembly, complete all as specified and directed.Make :- Godrej Code No. -5070 |
| 60 | S&F in repair 125 mm dia oval shape brass handle fancy type bright finish complete all as specified and directed. |
| 61 | S&F in repair stainless steel basket (plain) of approved quality of size 520 X 485 X 100mm complete all as specified and directed. Make :- Godrej SS 304 Code No. 6154 |
| 62 | S&F stainless steel plate/Thali basket of approved quality of size 520 X 485 X 200mm complete all as specified and directed. Make :- Godrej SS 304 Code No. 6168 |
| 63 | S&F in repair stainless steel cutlery basket of approved quality of size 520 X 485 X 100mm complete all as specified and directed. Make :- Godrej SS 304 Code No. 6162 |
| 64 | S&F in repair stainless steel cup & saucer basket of approved quality of size 520 X 485 X 100mm complete all as specified and directed. Make :- Godrej SS 304 Code No. 6159 |
| 65 | S&F in repair stainless steel carousel basket of approved quality of size 600mm x 600mm complete all as specified and directed. Make :- Godrej SS 304 Code No. 5819 (600mm dia) |
| 66 | S&F in repair stainless steel two shelf pull out basket of approved quality of size 150 X 485 X 430mm complete all as specified and directed.Make :- Godrej SS 304 Code No. 6169 |
| 67 | S&Fin repair steel ball bearing basket / trolly / Drawer channel 50cm long complete all as specified and directed.Make :- Godrej Code No. 8178 |
| 68 | S&F in repairs 30 mm whenContinuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 69 | S&F inmagnetic ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 70 | Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed. |
| 71 | M & L for screed plaster 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces mixed with WPC incl necessary doubingout etcfinished even and smooth for laying WPT without using extra cement complete all as specified and directed. |
| 72 | M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces 75mm radius and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed |
| 73 | M & Lfor APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mixand 20 micron HMHDPE film weight not less than 3.00Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @1.20 Kg/Sqm over bitumen primer conforming to IS-3384 @0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @1.20 Kg/Sqm over APP membrane with all overlaps complete all as specified and directed. |
| 74 | M & L for PCC 40mm thick (minimum Consolidated thickness) Type B-0 (1:2:4), using 12.5 mm graded crushed stone aggregate as in padding finished even and smooth without using extra cement with existing slope with V shaped groves 6mm wide and 10mm deep @ 0.60 metre spacing both bays or part there of on top of padding and filled with mastic bitumen of 1:1 preparation complete all as specified and directed. |
| 75 | Demolition and breaking upof rain water pipe /UPVC pipe line 100mm/75mmdia incl all fittings, complete all as specified and directed. |
| 76 | Supply & Fixedfor 110mm diaUPVC, soil waste drain pipe, type ‘A’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid infloors or walls etc complete all as specified anddirected.Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985 |
| 77 | Supply & Fixedfor 75 mm diaUPVC, soil waste drain pipe, type ‘A’ ,conforming toIS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall/floors etc complete all as specified anddirected.Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985 |
| 78 | Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified and directed. Note- UPVCbends shall be conforming to BS 4515 DIN 19531 and DIN 19534 |
| 79 | Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified and directed. |
| 80 | Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent cement, complete all as specified and directed. |
| 81 | Supply & Fixed for 75mm bore UPVC (SWR) bendincluding jointing with solvent cement, complete all as specified and directed. Note- UPVCbends shall be conforming to BS 4515 DIN 19531 and DIN 19534 |
| 82 | S&FPVC (SWR) 75 mm bore branch piece (Tee) fixed to walls with cement joint with or w/o ovel access door complete all as specified and directed. |
| 83 | S&FPVC (SWR) 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 84 | S&FPVC (SWR) 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 85 | Material andlabour in repairs 75mm diaPVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed. |
| 86 | Material andlabour in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed. |
| 87 | Supply & fixedin repairs stainless steel sink , made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracket incl bedding in cemen t mortar on dwarf wall or incl fixing cantilever brackets and connecting union to pipe incl waste pipe waste coupling etc of overall size 495x420 mm bowl size 410x330x160mm complete all as specified and directed. |
| 88 | Supply & fixed in repair stainless steel plate rack made out of 1.00mm thick sheet900x900x200mm complete all as specified and directed. |
| 89 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges complete all as specified and directed.Make: Jaquar Essco/Prayag/Plumber/Jal |
| 90 | Supply & fixed in repair for pvc bathroom mirror cabinet of size 127mmx343mmx546mmwall mounted incl all fiittings complete all as specified and directed. |
| 91 | Supply & fixed in repair for 5.5mm thick looking mirror of selected quality, bevelled edge 600mmx450mm glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer, pvc beading & rubber packing complete all as specified and directed. |
| 92 | Supply and fixing in repair low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long of pressure rating 6 kg/cm² including brass union and washer ateach end, one end screwed to inlet of piller tap/cistern and other end to stop cock etc complete all as specified and directed. |
| 93 | Supply and fixing in repairs Vitreous ChinaW.H.B. white of size 550 x 440 mm, incl waste pipe and brackets etc complete all specified and directed. |
| 94 | Supply and fixing in repairs Chromium plated brass pillar tapof size 15 mm inWHB/Kitcen sink etc complete all specified and directed. |
| 95 | S & F one-piece EWC with soft close seat cover, ‘S’ Trap, twin flush fittings, Siphonic Jet Flushing and 3D flush as per catalogue No S1013176 of M/s Cera (CERA EWCs-CHILE) or equivalent of Make mentioned under Appendix \"B\" including ‘S’ trap, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and directed. |
| 96 | Supply and fixing in repair 15mm bore two way angle valves fancy type, chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unionall as specified and directed. |
| 97 | Supply and fixing in repairs 15mm bore two way bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed. |
| 98 | Supply & fixedin repair fancy type shower rose125mm dia sizeof Rim and 30cm long CP brass pipe with swiwel joint complete all as specified and directed. |
| 99 | Supply and fixing in repair 15mm bore angle valves fancy type, chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unionall as specified and directed. |
| 100 | Supply andfixing in repair stop valves concealed type, 15mm dia fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions complete all as specified and directed. |
| 101 | Supply and fixing in repairs 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed. |
| 102 | Supply and fixing in repairCP brass soap dishcomplete all as specified and directed. |
| 103 | Material and labour for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. |
| 104 | Material and labour for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed. |
| 105 | S&F in repairs 20mm bore Gun-Metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 106 | Supply & fixed 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floorsincluding taking down of old GI tubing, 40 mm bore complete all as specified and directed. |
| 107 | S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipescomplete all as specified and directed. |
| 108 | Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 109 | Taking up or down 20 mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 110 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction and complete all as specified and directed. |
| 111 | All as per item no 110.00 but 20mm dia bore, complete all as specified and as directed. |
| 112 | Dismantling of ceiling board/lathing any thickness including frame work complete all as specified and directed. |
| 113 | Providing & Fixingfalse ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \"T\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \"T\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights complete all as specified and directed. |
| 114 | S&F M S plate or angle, channel, square cut or notched with riveted, bolted or welded attachment complete all as specified and directed. |
| 115 | Demolition,reinforced cement concreteroofs, floors (other than ground floors), beams, staircases, landing, parapets, chajjas, and similar suspended work cut as required to facilitate demolition complete all as specified and directed. |
| 116 | M & L for RCC 1:2:4 Type B0 using 12.5mm graded aggregate as in beams, cantilevers, bressummers, parapets, chajjas, lintels over 1.5m span etc, including formwork complete all as specified and directed. |
| 117 | Material and labour for repair to RCC (1:2:4) type B-1 using 20 mm gradedstone aggregateas in columns including necessary formwork complete all as specified and directed. |
| 118 | Material andlabour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed. |
| 119 | M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 120 | S & F IInd class hardwood Chowkhats and frames plain solid , straight wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 121 | S&F 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as cup board shutter and fixed with wooden frame-work complete all as specified and directed. |
| 122 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 123 | M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 124 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 ( Gde 165-E ) with flat iron for hold fast including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 125 | S&F Jet flush including plate & PVC connection complete all as specified and directed. |
| 126 | S&F IInd Class Hard wod small fittings such as brackets of any type, latch and hinges blocks , shaped door and window stops and the like, incl all necessary labours; article n.exc 200cu.cm each complete all as specified and directed. |
| 127 | S&F MS butt hinge 50mm medium weight cold rolled incl necessary welding etc complete all as specified and directed. |
| 128 | S & F IInd class hardwood chowkats and frames in cupboard plain fillets, square,rectangular or triangular in section (exc 13 sq.cm n. exc 25 sq.cm) clean sawn, with glue, pinned at joints and fixed with screw complete all as specified and directed. |
| 129 | M&L for Add extra for 6mm thick external teak wood lipping 18/19mm and fixed with nails complete all as specified and directed. |
| 130 | S & F 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 131 | S&F for 100mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 132 | Taking down shutters exceeding 1 Sqm andnot exceeding 2 Sqmand removing from site, complete all as specified and directed. |
| 133 | Taking down shutters not exceeding 1 Sqm and removing from site, complete all as specified and directed. |
| 134 | S & F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with bend pipe, connecting legs & wall flange (without Hand & Overhead Shower) as per catalogue No. SKU: QQT-CHR-7281 of Jaquar or equivalent Make of Kohler or Marc complete all as specified and directed. |
| 135 | S & F in repairs Brass CP mixer for WHB for mixing hot & cold water screwed down for iron/CPVC pipe and fixedwith Connecting Legs & Wall Flanges, Confirming to IS complete all as specified and directed. |
| 136 | S & F for in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 137 | S & F for in repairs Toilet paper holder with flat recessed type stainless steelfixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 138 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in loose/soft soil complete all as specified and directed. |
| 139 | Material & Labour cement concrete in foundation filling incl mass concreting PCC (1:4:8) type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 140 | Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, apex stones,side of interlocking tiles etc complete all as specified and directed. |
| 141 | Material & labour for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 25 mm thick sand cushioning under floor including watering and consolidation etc complete all as specified and directed. |
| 142 | Demolition of Lime concrete in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 143 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from siteand making good disturbed surface of walls, floors etc complete all as specified and directed. |
| 144 | Disconnecting unserviceable sub main wiring/service connection of any size and including conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed. |
| 145 | Taking downMCB DB\"s complete with MCB\"s/Isolator etc removing materials from siteand making good disturbed surface of walls, floors etc complete all as specified and directed. |
| 146 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copperconductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC nonmetallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistrandedcopper conductor cable green colour as earth continuity conductor complete all as specified and directed. |
| 147 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copperconductor cable of size 4.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC nonmetallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 4 sqmm single core multistrandedcopper conductor cable green colour as earth continuity conductor complete all as specified and directed. |
| 148 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cablein and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed inwalls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box andmodular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed for the following : |
| 149 | One light point/bell pointcontrolled by one way5 Amps SP switch |
| 150 | One ceiling fan/exhaust fan/Ventillation fan point controlled by one, one way switch. |
| 151 | One 5 pin 5 Amps socket outlet on same board with other switch |
| 152 | One 5 Pin 5 Amps socket outlet on independent board with other switch. |
| 153 | M&L for point wiring with 2.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cablein and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed inwalls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box andmodular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 2.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for 15 Amp socket outlet on independent board, complete all as specified and directed |
| 154 | M&L for point wiring with 4 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cablein and including PVC rigid non metallic conduit medium grade not less than 25mm dia ISI marked and fittings and accessories concealed inwalls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box andmodular white cover plate with frame for suitable module as per site requirements, one green colour cable of 4 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for One three pin socket outlet, 15 amp independent with cable 4 sqmm size, complete all as specified and directed. |
| 155 | S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed. |
| 156 | S&F of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. |
| 157 | S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. |
| 158 | S&F of modular bellpush, 6 Amp, 1 module, complete all as specified and directed |
| 159 | S&F of modular socket 6Amp, 2/3 pin combined2 module complete all as specified and directed. |
| 160 | S&F of mdoular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 161 | S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified and directed. |
| 162 | S&F of door bell ding dong type electric 230 volts AC , single phase, complete all as specified and directed. |
| 163 | S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed. |
| 164 | Supply and fixing in repair LED lamp 9/10 watt , 230 volts , 50 Hz, B-22 base for fixing in lamp holder and wall mounted decorative light fitting complete all as specified and directed. |
| 165 | S&F in repair box type LED tube light fitting in acrylic linear tube 1x 20 watt, 230V complete with bipin holders,LED power driver, connector block, and LED Tube rod 20 watt complete all as specified and directed. |
| 166 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 167 | Supply and fixing in repairLED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 168 | S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 169 | Supply and fixing testing and commissioning energy saving street light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover completewith individual LED lences in repaircomplete all as specified and directed.. |
| 170 | Supply and fixingstreet light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed withtwo nos of clamp , nut and bolts complete all as specified and directed. |
| 171 | Disconnecting and taking down existing electric meterand refixing the same electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc complete all as specified and directed. |
| 172 | Taking down existing fan, exhaust fan re use at site or carrying to the store(To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed. |
| 173 | Taking down existing geyser and refixing after cleaning and descaling complete all as specified and directed. |
| 174 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. |
| 175 | S&F of MCB distribution board single pole & neutral with 200 Amps rated bus bar,double door IP-43 DB\"s , made outof sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB\"s including blanking platecomplete all as specified and directed. |
| 176 | S&F of MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar,IP-43 , made outof sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer andoutgoing including blanking plate complete all as specified and directed. |
| 177 | S & F in repairMCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, \"B\" curve complete all as specified and directed. |
| 178 | S & F in repair MCB SP, 240 volt, 63 Amp capacity, 10 KA, \"B\" curve complete all as specified and directed. |
| 179 | S & F in repair MCB SPN, 240 volt,32 Amp capacity, 10 KA, \"B\" curve complete all as specified and directed. |
| 180 | S&F in repairMCB TPN, 415 volt, 63 Amp capacity,10 KA, \"B\" curvecomplete all as specified and directed. |
| 181 | S&F exhaust Fans AC single phase 230/240 volts of size 300 mm sweep steel body with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. |
| 182 | S&F water heater storage type,electric, capacity 25 litres, BEE 5 star rated, 240 volts, input 2000 KW, PUF insulated fitted with stainless inner container and cooper coil ofBEE 5 star rating models, max working head of water 25 Ltrs, fixed to wall with suitable MS tower/anchor bolts,Inlet/outlet pipes incl PVC connectionsgrouted to wall complete all as specified and directed. |
| 183 | Supply and fixing ceiling fan 1200 mm sweep , 230 Volts,AC , 50 Hz, copper winded motor, BE star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy including fan hook complete with all as specified and directed. |
| 184 | M&L for earthing complete with galvanised steel earth plate electrode Ea 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore Gl med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing complete all as specified and directed. |
| 185 | M& L for TV Socket incl PVC conduit and co axial cable wire complete all as specified and directed. |
| 186 | Taking up/down worn out/damaged/unserviceable xlpe /PVC insulated underground cable rmoured, heavy duty with aluminium conductors of any size, 1100 Volt grade from trench/duct/pole/wall/ pipes/rooftops etc. complete all as specified and directed. |
| 187 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed. |
| 188 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying cable etc and getting out in soft/loose and any type of soil complete all as specified and directed. |
| 189 | Returning,filling in and including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed. |
| 190 | Removing of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 191 | M&L bricks for protection cover to under ground cable (with old size sub class \"B\" bricks) laid flat abutting each other with width of protection being equal to length of brick. The gap between should not exceed 10 mm complete all as specified and directed. |
| 192 | M&L for dry river sand and punning for cushioning and cover for protection of under ground electric cable complete all as specified and directed. |
| 193 | Supply and fixingtubes light grade GI tubing 40 mm dia withall fitting laid in trenches, fixed on pole/on wall for cable protection including taking down old unserviceable pipe complete all as specified and directed. |
| 194 | Supply & Laying in trenches galvanised steel water tubing ofmedium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site of size 20mm dia complete all as specified and directed. |
| 195 | S&F in repair gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling of old unserviceable gate valve fixed at any location of Size 20 mm dia complete all as specified and directed. |
| 196 | Total in Figures |
| 197 | Quoted Amount in Words |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
