|
| 1 | Taking down carefully existing tarfelt, plaster or concrete bedding upto the RCC slab of any description over the surface of roof ,terraces including flashing and junctions of parapet/curb walls etc including removing off rubbish , material to a distance exceeding 250m but not exc500m and depositing complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in any description and in any position not other wise specifically provided for complete all as specified at site complete all as specified and directed. |
| 3 | Demolition of cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended workand in sunken portion including WC, IWC, floors traps etc, complete all as specified and directed. |
| 4 | Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 5 | Material and labour for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately |
| 6 | Material and labour for PCC 1:5:10 in foundations, sunken floorfilling and mass concrete, complete all as specified and directed. |
| 7 | Material and labourfor rendering 15 mm thick on brickwork or concrete surface in CM 1:3 with using water proofing compound,complete all as specified and directed.Note: Water proofing compound shall be measured and paid separately |
| 8 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 9 | Material and labour for One coat of bituminous based primer conforming to IS-3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated,complete all as specified and directed.. |
| 10 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with solar reflective bituminous aluminium paint @ 0.10 kg/sqm complete all as specified. |
| 11 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar,complete all as specified and directed. |
| 12 | Material and labourfor machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4, over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) etc,complete all as specified and directed. |
| 13 | Material and labour for Kota stone slab flooring polishing complete all as specified and as directed. |
| 14 | Material and labourfor machine cut kota stone slab 20-25 mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specified and directed. |
| 16 | Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc,complete all as specified and directed. |
| 17 | Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc,complete all as specified and directed. |
| 18 | Supply and fix 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etccomplete all as specified and directed. |
| 19 | Supply and fix 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etccomplete all as specified and directed. |
| 20 | Material and labour for Cutting chases, pinning with diamond cutter in Brick/Stone masonary wall and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth,complete all as specified and directed. |
| 21 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etccomplete all as specified and directed. |
| 22 | Ditto as per item No. 21, but exc 1.5 Sqm and n exc 4 sqm each,complete all as specified and directed. |
| 23 | Taking down shutters of any description exc 1 sqm but not exc 2 sqmeach ,complete all as specified and directed. |
| 24 | Taking down shutters of any descriptionnot exc 1 sqmeach, complete all as specified and directed. |
| 25 | Material and labourfor coloured non skid ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4,etc, complete all as specified and directed. |
| 26 | Material and labour for Light shade Vertified ceramictiles 10 mm thick (square / rectengular) polished, area of each tile exceeding 0.36 sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4, over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) etc complete all as specified and directed. |
| 27 | Material and labourfor Light shade Vertified ceramictiles 10 mm thick (square / rectengular) polished, area of each tile exceeding 0.36 sqm but not exc 0.42 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 28 | Material and labour for glazedcoloured ceramic tiles 300 x 600 x 10 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc, complete all as specified and directed. |
| 29 | Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and as directed. |
| 30 | Supply and fix 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. |
| 31 | Supply and fix 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 32 | Supply and fix 20 mm boreBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc, complete all as specified and directed. |
| 33 | Taking down eaves gutters, rainwater pipe and PVC Pipe (any size of pattern), including all fittings, heads, shoes, bends,swan necks etc including cleaning or refixing or removal to store all as specified to directed. |
| 34 | Supply and fixPVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or in floors or fixed to wall, complete all as specified and directed. |
| 35 | Supply and fix PVC (SWR) bends 110mm bore of any radius, complete all as specified and directed. |
| 36 | Supply and fix PVC (SWR) junction single ,(single T) equal or unequal 110mm bore, complete all as specified and directed. |
| 37 | Supply and fix PVC(SWR) vent cowl 110mm, complete all as specified and directed. |
| 38 | Supply and fix in repairs PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed |
| 39 | Supply and fix PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenchesor in floors or fixed to wall, complete all as specified and directed. |
| 40 | Supply and fix 75mm bore CI floor trap, complete all as specified and directed. |
| 41 | Supply and fix in reairs PVC (SWR) bends with access door any radius 75mm bore complete all as specified and as directed |
| 42 | Supply and fix in reairs PVC (SWR) bends75mm bore complete all as specified and as directed |
| 43 | Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 44 | Supply and fix vitreous china squatting pan \"ORISSA PATTERN \" size 580mm x 440mm \"white with integral foot rest (excluding flushing cistern and flush pipe ) with \"P\" or \"S\" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 45 | Supply and fix in repair vitreous china wash down water closet (Pedestal) including white PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, white (EWC), complete all as specified and directed. |
| 46 | Supply and fix in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting standincluding waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe, complete all as specified and directed. |
| 47 | Suppy only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 48 | Supply and fix 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 49 | Supply and fixPVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and directed. |
| 50 | Supply and fix15 mm bore angle stop cock long threadfancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and directed. |
| 51 | Supply and fix15 mm bore bib taps long bodychromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm boreetc complete all as specified and directed. |
| 52 | Supply and fix pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 53 | Supply and fixtowel rail 450mm long of PTMT fixed with and including cromium plated brass screws and wooden/plastic cleats (minimum weight 170 gms) complete all as specified and directed. |
| 54 | Supply and fixSoap dish any type , fixed to plugs with chromium plated brass screwes, complete all as specified and directed. |
| 55 | Supply and fixVitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 56 | Supply and fixUrinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed. |
| 57 | Supply and fix32mm dia UPVC Low density polyethylene (LDPE) waste pipes of pressure rating 6 kgf/sq. cm, complete all as specified and directed. |
| 58 | Supply and fixhand shower (health faucet) (ABS Chrome palted)with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed. |
| 59 | Supply and fix125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union, complete all as specified and directed. |
| 60 | Supply and fix 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and directed. |
| 61 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc, complete all as specified and directed. |
| 62 | Material and labour renderig for 15mm thick in cementmortar 1:6 overfair faces of of stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing of wall rendering is to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 63 | Material and labour for renderig 15mm thick in cementmortar 1:4 overfair faces of of stone masonry surfaces or surface other than fair face of brick-work or concrete surface oron one side of lathing of wall rendering is to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 64 | Material and labour renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cement, complete all as specified and directed. |
| 65 | Material and labour preparing surfaces of wall by complete removal of existing treament andapplying two coat of oil emulsion distemper on walls over a coat of 1mm thick wall care putty complete all as specified and as directed. |
| 66 | Material and labour for preparation of new plastered surfaceandapplying two coat ofoil bound distemper on walls complete over a coat of 1mm thick wall care putty all as specified and as directed. |
| 67 | Material and labour for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 68 | Material and labour for complete removal of existing treament on ceiling andapplying two coat of white wash all as specified and as directed. |
| 69 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of walls, complete all as specified and directed. |
| 70 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces of wall including complete removal of existing surfaces. |
| 71 | Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc, complete all as specified and directed. |
| 72 | Material and labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed. |
| 73 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, 20mm as specified, of random rubble walling, uncoursed or brought upto courses, complete all as specified and directed. |
| 74 | Material and labour Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:3, complete all as specified and directed. |
| 75 | Material and labour two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc, complete all as specified and directed. |
| 76 | Material and labour two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc, complete all as specified and directed. |
| 77 | Material and labour two coat synthetic enamel paint over one coat of pink primer on old wooden surface of any description not otherwise described over 10 cm width or girth etc, complete all as specified and directed. |
| 78 | Material and labour two coat synthetic enamel paint over one coat of red oxide primer on old steel surface of any description not otherwise described over 10 cm width or girth etc, complete all as specified and directed. |
| 79 | Supply and fix 40 mm thick Flush shutters, solid core construction, with particle board core and if both faces arecovered with decorative face veneer with lipping/frame to match, complete all as specified and directed. |
| 80 | Supply and fix 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a), , complete all as specified and directed. |
| 81 | Supply and fix 30 mm thick factory made second class hard wood glazed and skeleton shutters in windows, ventilators etc, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b), complete all as specified and directed. |
| 82 | Material and labour for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed. |
| 83 | Material and labour for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed. |
| 84 | Material and labour for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, complete all as specified and directed. |
| 85 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 86 | Returning, filling in,excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil, complete all as specified and directed. |
| 87 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at level n.exc 1.5m above the starting point, complete all as specified and directed. |
| 88 | Material and labour for 150mm dia RCC pipes class NP2 laid and jointed complete with collars as in trenches of any depth and including providing cement concrete bed 1:4:8 type D-2 to drain pipes of 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed. |
| 89 | Material and labour for rendering 15 mm thick on brickwork or concrete surface in CM 1:4 with using water proofing compound @ 200 ml/50Kg bag of Cement, finished the surfacefinished even andsmooth (without using extra cement) complete all as specified and directed.Note: Water proofing compound shall be measured and paid separately |
| 90 | Material and labour for extra forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement including forms, moulds , mitred/stopped ends etc, complete all as specified and directed. |
| 91 | Material and labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting outexisting benching for and formingbranch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-l smooth finished, and reformingbenching as required, , complete all as specified and directed. |
| 92 | Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 all as specified and as directed. |
| 93 | Material and labour for precast re-inforced cement concrete 1:2:4 type B1 (using 20 mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed. |
| 94 | Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 95 | Supply and fix Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed uard bars; barred iron doors; ladders; ramed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 96 | Materiala and labour for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 all as specified and as directed. |
| 97 | Supply and fix Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed. |
| 98 | Supply and fix in repairs Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 50 gms) , complete all as specified and directed. |
| 99 | Material and Labour for Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms), complete all as specified and directed. |
| 100 | Supply and fix Aluminum anodized powder coated frame fo doors, windows, ventilators powder coating (Min thickness of powde coating 50 microne) with one or more rebated including jointingcleats for fixing etc complete all as specified. |
| 101 | Supply and fix Anodised aluminium window and ventilator shutters, slidingtypetwo or three tracks without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium fittings like locking systemcomplete all as specified and directed by Engineer-in-Charge.(Thickness of powder coating not less than 50 micron) complete all as specified and as directed. |
| 102 | Supply and fix plain sheet glass 5 mm thick tinted,fixed to aluminium doors/ windows / ventilators complete all as directed (Note:- Beading/rubber packing is included in the rates for aluminium sections above.) |
| 103 | Supply and fix in repair 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putty (or beading) in square n.exc. 0.5 Sqm each including hacking out old broken glass from wooden/steel frames complete all as specified. |
| 104 | Supply and fix stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding, complete all as specified and directed. |
| 105 | Supply and fix in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding , complete all as specified and directed. |
| 106 | Supply and fix in repair ordinary rat tails 300 mm size pattern door springs including roller and roller plate complete, complete all as specified and directed. |
| 107 | Supply and fix in repairKicking plates, any size, of galvanised iron sheet lmm thick, fixed with galvanised screws, complete all as specified and directed. |
| 108 | Supply and fix in repair 100 mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor, complete all as specified and directed. |
| 109 | Dismantling of boarding fix with screws as in kitchen cabnit/ cup board/ partition/ shutteretc and simlar work |
| 110 | Supply and fix 25 mm flush shutters, solid core construction , with black board core and plywood face panels, if both face is covered with decorative face veneer with lipping/frame to match etc complete all as specified and directed. |
| 111 | Material and labour for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed. |
| 112 | Supply and fixfactory made Solid PVC door frame of size 50x47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforcedwith MS square tube suppling & fixed in opening as per specification and drawing. |
| 113 | Supply and fix factory made solid PVC door shutter 30 mm thick (Style) consisting of frames made out of MS tubes for top and bottom rails MS frame shall be covered with heat noulded plain colour PVC \"C\" channel having a PVC sheets of 20mm width stuck insidewith solvent cement for stiles and singles sides prelam PVC sheets and stile & rails having one side feathered edge and on other side 10mm (900) bent edges & as gap insert for top rail & bottam rail; Panelling to befitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheets beading and jointing together with solvent in the frame at site as per specification and drawing. |
| 114 | Supply and fix in hasp and staple of size 125 mm, safety type, aluminium anodised with mild steel hinge pinincluding bolt to hing plate and fixed with screws, complete all as specified and directed. |
| 115 | Supply and fix Stainless Steel Silver chrome DoorHandle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed. |
| 116 | Supply and fix 100 mm sizealuminium anodised barrel tower boltof extruded section, complete all as specified and directed. |
| 117 | Supply and fix 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodised and fixed type B-21, complete all as specified and directed. |
| 118 | Supply and fix mild steel butt hinges medium weight cold rolled 100 mm size, complete all as specified and directed. |
| 119 | Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and directed. |
| 120 | Supply and fix aluminum handles cast type anodized 150 mm size etc complete all as specified and directed. |
| 121 | Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy, complete all as specified and directed. |
| 122 | Supply and fix in repair stain less steel decorative cutrain rod of 25 mm bore inluding 2 nos steel finale and bracket 02 nos etc and fixed to wall with plastic rowl plug and steel screw complete all as specified and directed. |
| 123 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed and removing the material from the site in any mortar all as specified & directed. |
| 124 | Material and labour for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates)all as specified. |
| 125 | Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 126 | Material and labour for Cement concrete 1: 2:4 type B-1 (20 mm graded stone aggregate) as in edges for Coping, complete all as specified and directed. |
| 127 | Material and labour for granite (of any type) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cementusing marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 128 | Removal of debris obtained from demolition/dismantling upto 5km distance to outside MD land complete all as specified and as directed |
| 129 | Material and labour for Preparation and applyingtwo coat Varnishing over one coat thin varnish on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and directed. |
| 130 | Material and labourfor Preparation and applying one coat Varnishing over one coat thin varnish on old wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and directed. |
| 131 | Taking down carefully old UNSV aluminum/copper point wiring (light, fan, socket power etc) on TW batten/ PVC casing Capping surface steel/PVC conduit excluding all fitting/fixtures and making good disturbed surface of wall/floor/ceiling etc to match the adjoining surfaces. |
| 132 | Material and labour for point wiring complete with two single core, PVC insulated, unsheathed multi stranded bright annealed copper conductor cable, 1.5 sqmm 1100 volts FRLSH grade drawn through and including heavy duty PVC casing capping not less than 25 mm width with accessories surface mounted on walls, ceiling etc. on & including PVC box and plate for mounting switches, sockets regulators etc and one run of 1.5 sqmm PVC insulated unsheathed multi strandedcopper conductor cable FR grade as earth wire and connected to common earth dully complete for the following :- |
| 133 | One Light point controlled by one switch |
| 134 | One Fan point controlled by one switch |
| 135 | One 3 pint socket out let5 Amps on same board |
| 136 | Description all as per Item No 132 above, but using 2.5 sqmm copper conductor cable (multi strand) PVC insulated PVC insulated FRLSH (unsheathed ) for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green copper conductor cable as continuous earth wire with lugs complete all as specifiedand directed. |
| 137 | All as per item No 133, but 3/2 pin socket out let5 Amps on independent board |
| 138 | Supply and fix Switch piano flush type single pole one way 5 Amp, complete all as specifiedand directed. |
| 139 | Supply and fix Switch piano flush type single pole one way 15 Amp, complete all as specifiedand directed. |
| 140 | Supply and fix Socket out let 2 in 1,5 pin 5 Amp flush type,complete all as specifiedand directed. |
| 141 | Supply and fix Socket out let 2 in 1,5 pin 15 Amp flush type,complete all as specifiedand directed. |
| 142 | Supply and fix fan regulator electronic 5 step type 2 module suitable for 1200/1400 mm sweep fan, complete all as specifiedand directed. |
| 143 | Supply and fix ceiling rose surface type, PVC/Polycarbonate insulated body size 50x28 mm two three terminals complete all as directed. |
| 144 | Supply and fix PDC Housing LED Bulkhead Luminaire with Opal diffuser, equipped with 2 kV in-built surge protection with IP65 protection rating. 230 Volts complete all as directed.Make Havells /Bjaj/Crompton/wipro |
| 145 | Taking down carefully existing tube light fitting/Bulck Head /fixture and making good distributed surfaces of wall/floor/ceiling etc to match athe adjoining surfaces |
| 146 | Supply and fix LED light fittings fixture 20w, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermal conductive material with plastic housing, heat sink, environmental friendly having power factor> 0.95 surge protection 2.5KV energy ready to use complete all as directedMake Havells /Bjaj/Crompton/wipro |
| 147 | Refitting of serviceable light fitting any type and wattage obtaining wide item no 11 above complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete all as directed |
| 148 | Dismantling and taking down old US main switches/MCB/DBs enclosure etc any type capacityand making good to the disturbed surfaces of wall complete all as specified and as directed. |
| 149 | Dismantling and taking down carefully electric meter etc any type of capacity depositing electric meter in MES store and refitting electric meter after completing B&R works including making good to the disturbed surfaces of wall complete all as specified and as directed. |
| 150 | Material and labour for Submain wiring with two single core PVC insulated flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 sqmm as earth lead in and including PVC conduit/casing capping and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. |
| 151 | Supply and fix sheet metal inclosure MCB SPN 4 way distribution board 240 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43 protection. Make L&T or equivalent all as specified and directed . |
| 152 | Supply and fix sheet metal inclosure MCB SPN 8 way distribution board 240 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-54 protection. Make L&T or equivalent all as specified and directed |
| 153 | Supply and fix MCB SP 16 to 32 Amp 240 Volt B sires 10KA complete all as specified and directed. |
| 154 | Supply and fix FMCB SPN 32 to 40 Amp 240 Volt B sires 10KA complete all as specified and directed. |
| 155 | Supply and fix sheet metal enclosure Distribution board 415 volt, vertical TPN 8 way with provision for MCB legrand make or equivalent in as incomer SP/TP MCB’s as outgoing as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/recess mounting IP-54 K-09 protection. |
| 156 | Supply and fix MCCB TP 100 Amp 240 Volt B sires 16KA complete all as specified and directed.Make Legrand/Havells/L&T |
| 157 | Disconnect & insulate electric supply wire and taking down carefully exisiting ceiling fand and deposite to MES store yard with T&P. Supply and fixing new ceiling fans complete with blades, down rods, clamps accessories complete with nut bolt, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 158 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead wire4 mm fixing on wallby means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-2 and CI cover with frame all as shown in electrical plate No. 5 of SSR part-I all as specified and directed |
| 159 | Taking Taking out old unserviceable submain wiring of any type and capacity from existing all as per specified and directed |
| 160 | Note : The amount against Schedule of Credit on Page No. 43 shall be deducted from the total amountquoted against Sch \"A\"while deriving lum Sum for Acceptance. |
