|
| 1 | Taking down cement plaster on wall & ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for 12mm thick ready to use cement based plaster (Ready mix plaster) with high quality polymer additive and well graded sand and fillers over wallof brick, stoneor concrete including preparing the surfaces clean and made free from dirt,oil grease,concrete sealer or curing compound using a wirebrush of mopping. Dampen the surface with clean water. water to be mixed/ preparation of mortar to be done as per manufacturer instruction complete all as specified and directed. |
| 3 | M&L for 15mm thick renderingof brick wall in CM 1:6 finished even & fair on other than fair faces complete all as specified and directed. |
| 4 | M&L for 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & fair complete with using complete all as specified and directed.Note: WPC shall be measured and paid separately. |
| 5 | All as per item No 4.00 above but 5mm thick on ceiling complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered surfaces of wall and applyingtwo coat of cement base paint (any colour) over and including a coat of primercomplete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper over a coat of primer & over applying a coat1 mm ofwall care putty on wallincluding rubbing with sand paperto achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 8 | M&L for complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of cement paint on wall with brush complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed.(Make : Ist quality of approved make as specified). |
| 10 | M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 11 | M&L for preparation old plastered surfaces of wall and applyingthree coats of whitewash complete all as specified and directed. |
| 12 | M&L for preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on wall complete all as specified and directed. |
| 13 | Dismantling ofterracing tiles/brick tiles single layer on roof, laid bedded and pointed in any mortar complete all as specified and directed. |
| 14 | Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 15 | M&L for cement concrete type B0 (1:2:4 ) (using 12.5 mm graded stone aggregate) as in padding and coping,incl hunching, benching etc complete all as specified and directed. |
| 16 | M&L for 10 mm thick in CM(1:3) rendering on fair faces concrete surfaces / roof top mixed with liquid water proofing compound finished even & smooth without using extra cement complete all as specified and directed.Note : Liquid WPC shall be measured and paid separately. |
| 17 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 18 | M&L for Preparation of plastered floor surface by cleaning surface free from dust and other foreign materials etc. and laying in repair Atatic poly propylene polymer modified membrane pre fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS 3384 @ 0.4 lit/sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions complete all as specified and directed. |
| 19 | M&L for cool roof ceramic tiles of size 300 x 300mm / 400 x 400 mm,thickness - 8mm of Approved shade, tiles should be anti-skid and have SRI value of more than 90 tiles should be laid on roof using tile adhesive of approved make as per manufacturers instructions complete all as specified and directed.Note : Cost of Tile adhesive shall deemed to be inclusive in the Item. |
| 20 | M&L for grouting using SC Apcorep Injection Grout LV grout.The detail procedure of inject groutingas under complete all as specified and directed:-(i) Drilling of 12mm dia holes upto 40mm depth and provide PVC nozzles/ entry ports over grid@ 1m c/c or less depending upon situation.(ii) Before injecting the grout compressed air to be blown to remove all dist and dirt.(iii) Grouting at pressure of 5kg/sqcm to be don till refusal/ rejection or appearance of grout from adjacent nozzle.(iv) Observe the cracks and make V groove along.(v) Nozzles and V groove shall be filled with polymer based mortar. |
| 21 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 22 | All as per item No 21 above but reinforced cement concrete any position complete all as specified and directed. |
| 23 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articalscomplete all as specified and directed. |
| 24 | M&L for Brick work with old size, sub class B brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 25 | M&L for Brick work withold size, sub class B bricks straight or curved on planto any radius in half brick thick wallsbuilt in cement mortar 1:4 with complete all as specified and directed. |
| 26 | M&L for 1:1.5:3 nominal mix (20mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 27 | S&F Formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed. |
| 28 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 29 | M&L for Mild steel TMT bars 05 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binder and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 30 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path / plinth protection / sub base finished the surfaces even & fair complete all as specified and directed. |
| 31 | Removing of demolished meterial to a distance of exc 100m and n exc 200m or under, beyond the lead included in the rates, including loading, unloading complete all as specified and directed. |
| 32 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing)complete all as specified and directed. |
| 33 | M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as inleveling /sub base of flooringcomplete all as specified and directed. |
| 34 | M&L, Non-skid ceramic coloured tiles, 7 to 8 mm thick (square/rectangular)of size 400 x 400 mm , in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 35 | M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, ove and including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 36 | M&L for 600 x 600 mm size 8 to 9mm thick Non skid Ceramic tiles of approved colour as in floors etc.fixed with spacers (Light weight plastic of 3mm size) and epoxy grouting of joints mixed with to match with shade of tiles screed bed complete all as specified and directed. |
| 37 | All as per item No 36.00 above but as in skirting & including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 38 | S&F of 12 mm thick Stepping tiles as in treads, riser &landings of steps/ aproach, size of tiles / stone shall be 1200mm x600mm from which suitable size landing of steps/ approach shall be cut and applied as per site requirements fixed with Tile adhesive as per manufacturer instruction complete all as specified and directed. |
| 39 | M&L 14-16mm thick Granite (of any type) work (table rubbed and polished) in cooking flatforms, window jambs and cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust & pigment to match with shade of granite and rounding and polishing of edge complete all as specified and directed. |
| 40 | Dismantiling of loose concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling and also remove any existing treatment on RCC surface by rubbing, scrapping etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusingnecessary form work & scaffolding up to Three storey complete andsurface of guniting to be finished fair and even with and including10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractor on this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separately. |
| 41 | M&L for Mild steel TMTbar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed) for rebaring complete all as specified and directed. |
| 42 | M&L for welded steel wire fabric weight n exc 2 Kg/sqm complete all as specified and directed. |
| 43 | S&F precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) louvres and jallies, 35 mm thick (measured solid) set in CM 1:6, including all mouldings complete all as specified and directed. |
| 44 | M&L for preparation of old painted surfaces of iron and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint (any colour) complete all as specified and directed. |
| 45 | Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed. |
| 46 | S&F PVC board of thickness 18mm with decorative choice lamination on one side and plain colour on other, having minimum density of600 gm/cm3,Lead Free,Anti-Bacterial & Anti-Fungal,Termite & Borer Proof & Water Proof including cutting, screwing as in kitchen cabinet, almirah shutter also matching the sawn edges using same colour PVC edge band tape complete all as specified and directed. |
| 47 | M&L 150mm size stainless steel handles of design approved by GE complete all as specified and directed. |
| 48 | S&F of continuous piano hinges brass bright finish or electro galvanished width of flaps when open in 30 mmcomplete all as specified and directed. |
| 49 | S&FMagnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed. |
| 50 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame)n. exc 1.5 sqm complete all as specified and directed. |
| 51 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each complete all as specified and directed. |
| 52 | S&F SolidPVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet &reinforced with MS square tube and fixing in opening as specification& drawing, complete all as specified and directed. |
| 53 | S&F Pre-Painted steel windows & ventilators with glazed& wiremesh shutter with Guard bars. the frame and shutter section should be cut to length and miter joined with corner brackets made of Polypropylene. Mullion section should be joined using nut and bolts. 4mm thick clear float glass to be provided using EPDM gasket all around glass incl all necessary accessories required complete all as specified and directed. Ref TD - CELZ/C-TD/102 sheet 1/1 and 1/2.Make : NCL Buildteck pvt ltd / TATA Pravesh / Elixir Met form Pvt Ltd / Ashish industries.Note : Net opening will be measured for payemnt purpose no extra payment will be made for glass or wiremesh. |
| 54 | Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening &fixing and similar work conforming to Fe-290 grade E-165 complete all as specified, making good disturbed portion to match existing surface complete all as specified and directed. |
| 55 | M&L for preparation of new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 56 | M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single sideprelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single sideprelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying andfixing in the frame at site as per specification complete all as specified and directed. |
| 57 | S&F flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match complete all as specified and directed. |
| 58 | S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 59 | S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 60 | S&F 125 mm long Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed. |
| 61 | S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 62 | S&F Aluminium 125 mm, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 63 | S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories as specified and directed by Engr-in-charge. |
| 64 | S&F MS 125mm Butt hinges, heavy weight, cold rolled mild steelfixed into MS frame for caging work etc throgh spot welding complete all as specified and directed. |
| 65 | S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 66 | S&F 200 mmstainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 67 | S&F 300 mmStainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 68 | S&F 75mm long stainless steel door stopper of double legged with rubber shoes in bottomcomplete all as specified and directed. |
| 69 | S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 70 | S&F in repairTowel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed. |
| 71 | S&F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 72 | Supply and Fix in repairs 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long complete all as specified and directed. |
| 73 | Supply and fix in repairs vitreous china wash down water closet pedestal pattern white excluding flush pipe flushing cistern etc complete. including connection to drain pipe and to flushing pipe etc |
| 74 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 75 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 76 | S&F in repairs for vitreous china wash basin white flat back size 550x400mmbut exclusive taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipes, pedestal & brackets complete all as specified and directed. |
| 77 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, complete including providing and fixing wate pipe, plugs, beddings urinals against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; supplying fixing flushing cistern with brackets, flush pipe, waste pipe, grating and union for discharge pipe complete as specified and directed. |
| 78 | S&F 15mm bore PVC connection 600mm longheavy duty with brass fly nut and warsher for hot and cold water complete all as specified and directed. |
| 79 | S&F Soap dish, chromium plated incl fixing with connected accessories complete all as directed. Cat No- F50141106CH of Cera/ AQN-7731 of Jaguar / K-25068IN-CP of KOHLER or equivalent make. |
| 80 | S&F in repair glass shelf chromium plated grills & toughened glass base complete all as specified and directed. |
| 81 | S&F PTMT cabinet Mirror of size 400 x 500mm incl required accessories complete all as specified and directed. |
| 82 | S&F in repairs chromium plated shower rose 125mm sizeincl shower arm casted 190 mm long flat shape for wall mounted showers with flangeinclfixing to steel pipe or union complete all as specified and directed. |
| 83 | S & F 15 mm bore, brass CP wall mixer (2 in 1) for mixing hot and cold water including provn of overhead shower with 115mm long bend pipe, connected legs and flages including all other connected accessories screwed down for iron pipe complete all as specified and directed. Cat No- HT F3001402 OF CERA / CON-273KNUPR of Jaguar or equivalent make. |
| 84 | S&F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. |
| 85 | S&F repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 86 | S&F in repair for 15mm bore stop valves,fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 87 | S&F repair 15mm bore angle valves,fancy type two way chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 88 | S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. Cat No-HT 3001461 of CERA/ CON-167KNB of Jaguar /K-72275IN-4ND-CP of KOHLER or equivalent make. |
| 89 | S&F in repairs waste pipe for Sink/WHB/Urinal, length exc 0.75m complete all as specified and directed. |
| 90 | S&F PVC (SWR) floor trap of 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 91 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 92 | S&F PVC (SWR) vent cowl complete all as specified and directed. |
| 93 | Taking up or down steel tubing and connections of 15 mm bore including fittings of any type and material complete all as specified and directed. |
| 94 | Taking up or down 20 mm dia steel tubing and connection including removal of fittings of any type and material complete and all as specified and directed. |
| 95 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 96 | S&F GI steel tubing 15mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 97 | Supplying and laying of 20 mm dia, CPVC pipes SDR 11 & plain CPVC SDR 11 with all fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 98 | S&F GI steel tubing 20mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 99 | Supplying and laying of 25 mm dia, CPVC pipes SDR 11 & plain CPVC SDR 11 with all fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 100 | M&Lball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and directed. |
| 101 | Dismantling water tanks and remove to store capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed. |
| 102 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover,float valve,tank adaptor etcincluding GI nipple of suitable size complete all as specified and directed. |
| 103 | S&F stainless steel curtain rods of 25mm diaas in doors/ windows SS brackets fancy type, including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. |
| 104 | S&F in repair 20mm dia Gun metal globe or gate valve with iron wheel head, screwd both ends for iron pipe complete all as specified and directed. |
| 105 | S&F Salt-glazed stoneware gully traps of size 150 X 150mm, square or round mouthed, type \"P\" complete all as specified and directed. |
| 106 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ disintegrated rock complete all as specified and directed. |
| 107 | M&L Hard core in broken stone or boulders of gauge n exc 63 mm, diposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed. |
| 108 | M&L for plain cement concrete 1:4:8,Type D2 (using 40 mm graded stone aggregate), 75mm thick as in sub base complete all as specified and directed. |
| 109 | M&L for sand cushioning 50 mm thick spread, levelled, compacted to receive interlocking tiles complete all as specified and directed. |
| 110 | M&L for machine pressed pre cast concrete interlocking paver blocks (with grey cement and pigment) any shape and size conforming to IS-15658-2006 of 80 mm thicknes,M-40 grade complete all as specified and directed. |
| 111 | S&F in repairs cast iron floor trap of 75 mm dia, chromium plated detatchable grating including jointing to waste pipe with lead oints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed. |
| 112 | Removal ofsoilsn. exc50 mtrand depositing where as directed n exc 1.50 m high from starting point complete all as specified and directed. |
| 113 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. |
| 114 | Point wiring for one light point/bell point/exhaustcontrolled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size 25mm dia with all fittings (ISI Marked) controlled by one switch including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified and directed. |
| 115 | All as per item No 114 above but upto ceiling height and on surface at ceiling complete all as specified and directed. |
| 116 | All as per item No 114 above but for one 3 pin 15 Amps socket outlet independentwith 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 117 | All as per item No 114 above but for one socket outlet 5 amps on independent board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 118 | All as per item No 114 above but for one socket outlet 5 amps on same board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 119 | M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed. |
| 120 | S&F switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed. |
| 121 | M&L for socket 6 amps modular type 2/3 pin combined 2 module, 230 volts complete all as specified and directed. |
| 122 | M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed. |
| 123 | M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. |
| 124 | S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed. |
| 125 | S&F of LED Aluminiumbatten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures. |
| 126 | S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed. |
| 127 | S&F Emergency LED lamp gets automatically switched on during a power cut and runs effectively upto 3 hours having rated wattage 9 Watt Lumen (AC)900 Lumen (DC) 350 PF> .9 Colour temperature 6500 K CRI>80 protection class IP 20 complete all as specified and directed. |
| 128 | S&FVTPN distribution board iron clad, double door with IP-43 1K-09 protection suitablefor MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, complete with one MCCB 4 pole 415 Volts 125Amps rating with rupturing cap 16 KA of the same make as ofVTPN distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site complete all as specified and directed. |
| 129 | Supply and fix sheet metal enclosure MCB distribution board,8 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed. |
| 130 | S&F amp rating 240 V, 10 KA \"C\" curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 131 | All as per item No 130 above but SPN 40 to 63 Amp complete all as specified and directed. |
| 132 | M&L in replacement forsubmain wiring with twosingle core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 Sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 133 | M&L in replacement forsubmain wiring with twosingle core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 Sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 134 | Supply only in replacement of Modular AC Box with 20 A SP MCB Plastic enclosure & unbreakable heavy duty with ISI Plugtop complete all as specified & directed. |
| 135 | Dismantling & taking down old exhaust fan and deposited in MES Store & Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep withlouver with cavity complete all as specified and directed. |
| 136 | Disconnecting & taking down upto 1200/1400m sweep ceiling fan and deposited to MES store yard and Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%,with remote for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc complete all as specified and directed. |
| 137 | S&F in repair electronic fan regulator, socket size, step type suitable for ceiling fan of 1200 / 1400 mm sweep complete all as specified and directed. |
| 138 | Dismantling & taking down old Geyser & deposited in MES store& Supply and fixing electric water heater, stoarge type made of ultra thick super cold rolled steel plates, feroglass dry powder coat-ing technology inner tank and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW Capacity, 230 Volt, 1 Phase AC, 50 Hz, 25 Ltrs, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating performance and resistance to oxidation and carbonation at high tempratures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece and writing MES no. in black synthetic enemael paint/engraving tool etc complete all as specified & directed. |
| 139 | Suplly only surface mounted 1ft x 4ft commercial luminaire with CRCA housing suitable for open offices , hospitals and educational institutions complete with driver, holders suitableincluding connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed. |
| 140 | M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion. |
| 141 | M&L for switch piano flush button single pole one way 15/16 amps 230 volts complete all as specified and directed. |
| 142 | M&L for switch piano flush button single pole one way 5/6 amps 240 volts complete all as specified and directed. |
| 143 | M&L for socket outlet 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts complete all as specified and directed. |
| 144 | M&L for socket 5 amps 3 pin flush type 230 volts complete all as specified and directed. |
| 145 | Supply and fix sheet metal enclosure MCB distribution board,4 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified and directed. |
| 146 | Supply and fixing of Exhaust Fan steel body AC single phase 230 volts of size 300mm sweep with blades and frames, louvers complete all as specified and directed. (Including cutting holes) |
| 147 | Supply & Fix desert cooler electric driven (single phase), having nominal air flow capacity of 5000 Cum Per hour (or nearest size) plastic /PVC body complete all as specified and directed. |
| 148 | S&F of desert cooler stand using angle iron (40 x 40 x 6 mm) making square type platform of min size 800 x 800mm and fixing through two angle iron piece for horizontal support and two angle iron piece for 45 degree angle vertical support into the walls of any type / height as required on site by means of required nuts, bolts, fastners, welding work etc to form a platform suitable for fixing the desert cooler of any size & type compete all as specified and directed.Note: Angle iron should be painted with a coat of red oxide primer and two coat of synthetic enamel paint.Minimum 20 cm length of the angle iron should be inserted into the wall and fixing the same through required PCC work.Cutting chases in walls required for fixing the angle iron support shall be finished with cement mortar 1:4 and surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor. |
