|
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 2 | Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete complete all as specified and directed. |
| 3 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | M&L for cement concrete Type D2 (1:4:8) (using 40mm graded stone aggregate) as in foundations,filling and massconcrete complete all as specified and directed. |
| 5 | M&L for sand filling under floor or in foundation including watering and in consolidation complete all as speified and directed. |
| 6 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 & ISI Marked of 80 mm thickness M-40 Grade with grey cement and pigment (Red & yellow) complete all as specified and directed. |
| 7 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path / plinth protection / sub base finished the surfaces even & fair complete all as specified and directed. |
| 8 | Demolition of reinforced cement concrete any position complete all as specified and directed. |
| 9 | M&L for Nominal mix Type B0 (1:1.5:3) (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors,chajjas, balconies, canopies, deck slabs and in shelves blocks etc and the like complete all as specified and directed. |
| 10 | S&F Formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang,chajjas etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed. |
| 11 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articalscomplete all as specified and directed. |
| 12 | M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6complete all as specified and as directed. |
| 13 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing)complete all as specified and directed. |
| 14 | M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as inleveling /sub base of flooring complete all as specified and directed. |
| 15 | M&L for 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 16 | M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laidjointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 17 | M&L for 600 x 600 mm size 8 to 9mm thick Non skid Ceramic tiles of approved colour as in floors etc.fixed with spacers (Light weight plastic of Size 1.5mm/3mm) and epoxy grouting of joints mixed with to match with shade of tiles screed bed complete all as specified and directed. |
| 18 | All as per item No 17.00 above but as in skirting & including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 19 | M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 20 | S&F of 12 mm thickFull Body Vitrified Stepping tiles as in treads, riser &landings of steps/ aproach, size of tiles / stone shall be 1200mm x600mm from which suitable size landing of steps/ approach shall be cut and applied as per site requirements fixed with Tile adhesive as per manufacturer instruction complete all as specified and directed. |
| 21 | M&L 14-16mm thick Granite (of any type) work (table rubbed and polished) in cooking flatforms, window jambs and cills and like in CM 1:4 including pointing in white cement (1:2) using marble dust & pigment to match with shade of granite and rounding and polishing of edgecomplete all as specified and directed. |
| 22 | Dismantiling of loose concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling and also remove any existing treatment on RCC surface by rubbing, scrapping etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusingnecessary form work & scaffolding up to Three storey complete andsurface of guniting to be finished fair and even with and including10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractor on this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separately. |
| 23 | M&L for Mild steel TMTbar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed ) for rebaring complete all as specified and directed. |
| 24 | M&L for welded steel wire fabric weight n exc 2 Kg/sqm complete all as specified and directed. |
| 25 | Taking down cement plaster on wall & ceiling including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 26 | M&L for 12mm thick ready to use cement based plaster (Ready Mix Plaster) with high quality polymer additive and well graded sand and fillers over wall of brick, stone or concrete including preparing the surfaces clean and made free from dirt, oil grease, concrete sealer or curing compound using a wire brush mopping. Dampen surface with clean water. Water to be mixed/preparation of mortar to be done as per manufacturer instruction complete all as specified and directed. |
| 27 | All as per item No. 26 above, but 5 mm thick on ceiling complete all as specified and directed. |
| 28 | M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 29 | M&L preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 30 | M&L for preparation of newly plastered surfaces of wall and applyingthree coats of whitewash complete all as specified and directed. |
| 31 | M&L for preparation of old decorated plastered surfaces of wall and applyingtwo coats of whitewash complete all as specified and directed. |
| 32 | Supplying and applying, two components acrylic polymer modified cementitious coating on new masonry surfaces devoid of plaster, with Hydrostatic resistance upto 5 bars with forced coverage of 1.75 Kg per Sqm in two coats using roller or brush with a gap of 4 to 6 hrs between the coats. The coats to be applied shall be perpendicular to each other complete all as specified and directed.Note : The Coverage is to be strictly maintained for film formation. |
| 33 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper over a coat of primer over and including applying a coat1 mm ofwall care putty on wallincluding rubbing with sand paperto achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae 100% acrylic emulsion over and including a coat of exterior water based primer complete all as specified and directed. |
| 35 | Complete removal of any existing treatment from old surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed. |
| 36 | Complete removal of any existing treatmentand applying a coat of 1mm thickwall care putty on wall and rubbing the surface with sander to achieve a smooth surface and sharp straight edges etc.and applying two coats of oil bound distemper (any colour) complete all as specified and directed. |
| 37 | Taking up or down 40 mm dia steel tubing and connection including cleaning for refixing or removalcomplete all as specified and directed. |
| 38 | S&F GI steel tubing 40 mm bore mediumgrade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete as specified and directed. |
| 39 | M&L for cement concrete (1:2:4) Type B0 (using 12.5mm graded stone aggregates) laid in slope towards drainage out spout pipe mixed with waterproofing compound as per manufacturer instructions drainage spouts shall be provided integrally while laying PCC completeall as specified and directed. Fixing of spout shall be done with same PCC as in this item. |
| 40 | M&L for Preparation of plastered floor surface by cleaning surface free from dust and other foreign materials etc. and laying in repair Atatic poly propylene polymer modified membrane pre fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS 3384 @ 0.4 lit/sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions completeall as specified and directed. |
| 41 | M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in required complete all as specified and directed. |
| 42 | Taking up or down steel tubing and connections of 15 mm bore including fittings of any type and material complete all as specified and directed. |
| 43 | Taking up or down 20 mm dia steel tubing and connection including removal of fittings of any type and material complete all as specified and directed. |
| 44 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 45 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threded elbow, Brass threded Tee, FBTA, MBTA etc on walls/ceiling or laying in floors complete all as specified and directed. |
| 46 | All as per item No. 45.00 above, but 25 mm dia CPVC pipes completeall as specified and directed. |
| 47 | S&F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. |
| 48 | S&F repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 49 | S&F repair 15mm bore angle valves,fancy type two way chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 50 | S&F 15 mm bore, brass CP wall mixer (2 in 1) for mixing hot and cold water including provn of overhead shower with 115mm long bend pipe, connected legs and flages including all other connected accessories screwed down for iron pipe complete all as specified and directed. |
| 51 | S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe completeall as specified and directed. |
| 52 | S&F in repairs for vitreous china wash basin white flat back size 550x400mmbut exclusive taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipes, pedestal & brackets complete all as specified and directed. |
| 53 | S&F 15mm bore PVC connection 600mm longheavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed. |
| 54 | S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet, ball float and handle including brackets complete all as specified and directed. |
| 55 | S&F in repair vitreous china wash down water closet pedestal pattern white with plastic seat cover (excluding fixing of bolt of flushing cistern and flush pipe) including all fitting complete all as specified and directed. |
| 56 | S&F for 15 mm bore sink mixer chromium plated with swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and directed. |
| 57 | S&F Soap dish, chromium plated incl fixing with connected accessories complete all as specified and directed. |
| 58 | S&F in repair glass shelf chromium plated grills & toughened glass base complete all as specified and directed. |
| 59 | S&F wall mounted towel rack chromium plated 600 mm including fixing with connected accessories complete all as specified and directed. |
| 60 | S&F PTMT cabinet Mirror of size 400 x 500mm incl required accessories complete all as specified and directed. |
| 61 | S&F in repair Towel ring chromium plated dia not less than 15 cm with mounting brackets complete all as specified and directed. |
| 62 | S&F 15 mm dia & 1m long flexible SS braided cord health faucet incl chromium plated wall hook fixed to wall complete all as specified and directed. |
| 63 | S&F in repairs Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 64 | S&F stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed. |
| 65 | Dismantling water tanks and remove to store capacity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed. |
| 66 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover,float valve,tank adaptor etcincluding GI nipple of suitable size complete all as specified and directed. |
| 67 | Taking down 75/ 110 mm dia rain water pipes, any pattern with all fittings complete all as specified and directed. |
| 68 | S&F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends 110 mm borecomplete all as specified and directed. |
| 70 | Dismantling of 75 to 100 mm dia CI pipes/fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required complete all as specified and directed. |
| 71 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm borelaid in floor/trenches complete all as specified and directed. |
| 72 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm borelaid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed. |
| 73 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm borelaid in floor/trenches complete all as specified and directed. |
| 74 | Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm borelaid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed. |
| 75 | S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B1 (using 12.50 mm graded stone aggregate) complete all as specified and directed. |
| 76 | S&F cast iron branch pieces 100mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 77 | S&F cast iron branch pieces 75mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 78 | S&F 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 79 | S&F 75mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 80 | S&F CI vent cowl of size 75mm / 100 mm dia complete all as specified and directed. |
| 81 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 82 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame)n. exc 1.5 sqm including making good dismantled portion by brickwork, concrete (1:2:4) or CM(1:3) and plastering complete all as specified and directed. |
| 83 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each complete all as specified and directed. |
| 84 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 85 | All as per item No. 84.00 above, but size 50 x 125 mm complete all as specified and directed. |
| 86 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and incl. fixing with stainless steel butt hinges of size 100mm 4nos each door with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 87 | All as per item No. 86 above, but 35mm mm complete all as specified and directed. |
| 88 | S&F 30mm thick plain WPC factory made wire mesh solid door shutter (confirming as per Is 4020) with density not less than 600 KG/Cum Manufactureed by anISO 9001-2015 certified company. The door to be pannened with SS mosquito mesh for additional strength and safety purpose Door should be fixed with SS hinges and SS screwDoor should be water proof fire retardant and having screw holding capacity all as per manufacturer specification complete all as specified and directed. Note:-SS Wire cloth used shall be of 0.36 mm nominal dia and average width of aperture 1.40mm. |
| 89 | S&F 150mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 90 | S&F 150 mmstainless steel barral tower bolt of extruded section fixed with SS screws etc complete all as specified and directed. |
| 91 | S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 92 | S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 93 | S&F 200 mmstainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 94 | S&F 300 mmStainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 95 | S&F 75mm long stainless steel door stopper of double legged with rubber shoes in bottomcomplete all as specified and directed. |
| 96 | S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 97 | S&F MS 125mm Butt hinges, heavy weight, cold rolled mild steelfixed into MS frame for caging work etc throgh spot welding complete all as specified and directed. |
| 98 | M&L for powder coated aluminium window and ventilator shutters incl frame, side hung type without sash bars, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long( 01 No), hinge type B-21 100mm long (02 Nos), 100mm long handle (02 Nos) and tower bolts 150 mm long (02 Nos) in each shutter complete all as specified and directed. The Rate is inclusive of S &F for Glass panes.(a) Frame - 64 x 40 x 1.20 mmmain frame fixed to wall with screwed complete all as specified and directed.(b) Side rail- 40 x 18 x 1.0 mm(c) Bottom rail - 40 x 18 x 1.09 mm(d) Top rail - 40 x 18 x 1.09 mm |
| 99 | All as per item No. 98.00 above, but wire gauzed window, complete all as specified and directed. The rate is inclusive of S& F for wire gauze complete all as specified and directed. |
| 100 | S&Fstainless steel curtain rods of 25mm diaas in doors/ windows SS brackets fancy type ,including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. |
| 101 | Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed. |
| 102 | S&F HDF-HMR (High Density Fibre Board Moisture Resistant) of thickness 18 mm with decorative choice lamination on one side and plain colour on other, having minimum density of 850 Kg/Cum, lead free, anti-bacterial & anti fungal, termite & borer proof & water proof including cutting, screwing as in kitchen cabinet, cupboard shutter also matching the sawn edges using same colour edge band tape complete all as specified and directed. |
| 103 | M&L 150mm size stainless steel handles of design approved by GE complete all as specified and directed. |
| 104 | S&F of continuous piano hinges brass bright finish or electro galvanished width of flaps when open in 30 mmcomplete all as specified and directed. |
| 105 | S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed. |
| 106 | Dismantling ofterracing tiles/brick tiles single layer on roof,laid bedded and pointed in any mortar complete all as specified and directed. |
| 107 | Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 108 | M&L for cement concrete type B0 (1:2:4 ) (using 12.5 mm graded stone aggregate) as in padding and coping, incl hunching, benching etc complete all as specified and directed. |
| 109 | M&L for 10 mm thick in CM(1:3) rendering on fair faces concrete surfaces / roof top mixed with liquid water proofing compound finished even & smooth without using extra cement complete all as specified and directed.Note : Liquid WPC shall be measured and paid separately. |
| 110 | Supply only integral water proofing compound complete all as specified and directed. |
| 111 | M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 1.5 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqmand a geotextile of 40 GSM to be applied over first coat while first coat is still wet, the PU coating is to be continued 150mm up the parapets or walls and 100mm into the rainwater pipes. The final coat of Polyurethane coat is to be sprinkled with a micron layer of clean sand if the roof is non-accessible type. For Accessible rooftype Roof tiles to be provided.complete as per manufacturer\"s instructions complete all as specified and directed.Note:The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer\"s gurantee. The amount of Rs. 40 ( Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor\"s final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work.3. Cost of providing roof tiling will be paid under respective item. |
| 112 | Removing of demolished meterial to a distance of exc 100m and n exc 200m or under, beyond the lead included in the rates, including loading, unloading complete all as specified and directed |
| 113 | M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat zink chrome red oxide primer complete all as specified and directed. |
| 114 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 115 | M&L 100mm size stainless steel hinges auto close type complete all as specified and directed. |
| 116 | S&Fin 40mm dia, brass polished cupboards knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 117 | S&F for Stainless steel tray, bucket and baskets of suitable shape and size for modular kitchen, fixing as per manufacturer\"s instructions complete all as specified and directed. |
| 118 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 119 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. |
| 120 | M&L for point wiring for onelight/fan/bell/exhaust fan point/ controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified and directed. |
| 121 | All as per item No 120.00 above but upto ceiling height and on surface at ceiling complete all as specified and directed. |
| 122 | All as per item No 120.00 above but for one 3 pin 15 Amps socket outlet independentwith 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with complete all as specified and directed. |
| 123 | All as per item No 120.00 above but for one socket outlet 5 amps on indipendent board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 124 | All as per item No 120.00 above but for one socket outlet 5 amps on same board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with complete all as specified and directed. |
| 125 | M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed. |
| 126 | S&F switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed. |
| 127 | M&L for socket 6 amps modular type 2/3 pin combined 2 module, 230 volts complete all as specified and directed. |
| 128 | M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed. |
| 129 | M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. |
| 130 | S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed. |
| 131 | M&L for bell push modular type 1 Module one way 6 amps 240 volts complete all as specified and directed. |
| 132 | M&L for bell electric heahy duty Ding Dong type 230 volts single pole complete all as specified and directed. |
| 133 | S&F of LED Aluminiumbatten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100 lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed by Engr-In-Charge. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures. |
| 134 | S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed. |
| 135 | S&F PDC Housing LED Bulkhead 10 wattluminaire with opal diffuser, equipped with 2kV in- built surge protection with IP 65 protection rating complete all as specified & directed. |
| 136 | S&F Emergency LED lamp gets automatically switched on during a power cut and runs effectively upto 3 hours having rated wattage 9 Watt Lumen (AC)900 Lumen (DC) 350 PF> .9 Colour temperature 6500 K CRI>80 protection class IP 20 complete all as specified & directed. |
| 137 | S&FVTPN distribution board iron clad, double door with IP-43 1K-09 protection suitablefor MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, complete with one MCCB 4 pole 415 Volts 125Amps rating with rupturing cap 16 KA of the same make as ofVTPN distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified & directed. |
| 138 | Supply and fix sheet metal enclosure MCB distribution board,8 way double door with IP-43 protection with 200 Amp rated bus bar complete all as specified & directed. |
| 139 | S&F amp rating 240 V, 10 KA \"C\" curve miniature circuit breaker (MCB)5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified & directed. |
| 140 | All as per item No 139.00 above but SPN 40 to 63 Amp complete all as specified & directed. |
| 141 | M&L in replacement forsubmain wiring with twosingle core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 Sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified & directed. |
| 142 | All as per item No 141.00 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 32 mm dia complete all as specified & directed. |
| 143 | Supply and fixing of Exhaust Fan AC single phase 230/240 volts of size 300mm sweep with louvers complete all as specified & directed. |
| 144 | Supply and fixingExhaust Fan high quality engineering plastic, resistant to colour change with anti- statio properties (ventil air)250 mm sweep 35 watt ,1200 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, grouting of nuts, bolts,fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduitfrom celling rose to exhaust fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed. |
| 145 | Supply and fix water heater storage type, electric, capacity 25 Ltr BEE 5 Star complete all as specified & directed. |
| 146 | M&L for Earthing complete with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 complete all as specified & directed and testing on completion. |
