|
| 1 | ProvidingRCC/PCC of Mix 1:2:4 by using 20 mm graded crushed granite aggregate for column footings and beams etc., including mixing, depositing in position, tampering, finishing, curing etc., (Item includs all materials,labbour and shuttering etc.,) complete all as directed. |
| 2 | Supply and providing HYSD bar reinforcement of Fe-500 grade of approved make SAIL / RINL / TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed |
| 3 | Fabricating of structural steel by straightening, cutting and welding by using all types of steel sections such as plates, flats, pipes, angles etc.,of any size including erecting in position to line and level and applying two coats of paint over one coat of zinc rich primer, hire charges for tools and plants, other incidentals and all consumables etc. complete as directed by Engineer-in-charge. Note: weight shall be measured as per actual weight of material consumed at site.. (Steel issue free by HSL but loading and unloading is in Contractor\"s scope) |
| 4 | Supply, Fabricating of structural steel by straightening, cutting and welding by using all types of steel sections such as plates, flats, pipes, angles etc.,of any size including erecting in position to line and level and applying two coats of paint over one coat of zinc rich primer, hire charges for tools and plants, other incidentals and all consumables etc. complete as directed by Engineer-in-charge. Note: weight shall be measured as per actual weight of material consumed at site. |
| 5 | Supply of 16mm dia fully threaded GI bolt of 8.8 grade, 800mm long with required nuts and washers etc., complete all as directed. |
| 6 | Supply and Fixing of precoated, trapezoidal profiled Galvalume sheets for side cladding & Entrance door shutters (size, shape and pitch of corrugation as approved by Engineers In-charge), 0.50mm total coated thickness (TCT) Zinc Alluminium alloy coating AZ 150 as per IS:277/ ASTM/1379 in 550Mpa steel grade, painted with silicon modified polyster 18-22 microns on top 5-8 microns Epoxy Primer at bottom side of the sheet from Jindal/ Tata Blue scope / Bushan Steel. The sheet shall be fixed using self drilling /self tapping screws @ 500mm c/c along the length of side purlins/supports and where ever specified by Engineer of size (5.5x55mm) with EPDM seal of make CORRO SHIELD/ BUILDEX/ HILTI of equivalent @ 500mm c/c along the supports / purlins and where ever specified by Engineer representative. complete all as directed. (Quoted rate shall inclusive of End & side laps of sheet). |
| 7 | Construction of Brick work with common burnt clay F.P.S (Non-Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 Cement : 6 coarse sand) including cost of cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) and all materials etc., complete. |
| 8 | Providing 15 mm thick plaster with CM(1:4) to walls at all heights and to ceilings, beams, Stair-case, lintel soffits, chajjas, projections, narrow bands and widths etc., including cost of all materials, tools, plant and labour, scaffolding arrangements and curing all as per specifications and directions of the engineer. |
| 9 | Applying two coats of putty of approved brands Birla / JK to new wall & concrete surfaces at all heights including applying suitable primer including necessary scaffolding and staging where ever required. Putty shall be finished till a smooth and even surface is achievedetc., complete all as directed. |
| 10 | Apply two coats ofpremium quality arcylic Interior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brandsAsian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., complete. (Rate includes removal of old paint with Buffing machine) |
| 11 | Apply two coats of premium quality weather proofing arcylic Exterior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (apex ultima),Berger (All guard) where ever specified by Engineer in charge. |
| 12 | Providing and fixing anodized extruded aluminium partitions with door, windows & ventilators (single or double shutter), part pannelled and part glazed with pre-laminated flat pressed 12mm thick particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour including aluminium powder coated(50 Microns) frame conforming to IS:1948, IS:1949 fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 2mm wall thickness as per IS:1285, IS:733 and electro color coating of 15 microns thickness. Glazing shall be clear float glass of 5.5mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, \"L\"drops, stays, floor springs, hydralic door closers etc) lokcing arrangement for windows, Godrej make mortice lock with 3 no keys for each door, C.P.brass / staineless steel screws, providing and fixing hinges / pivots, and making provisions for fixing of fittings where ever required including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired. |
| 13 | Supplying, fitting andglazed vitreous china wash basin 550X400mm Size of Parryware / Hindware / Jaquar or qualient Make with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Chromium plated approved deluxe head pillar tap of Hindware/Parry or Equalientmake, 32mm dia Chrome Plate waste couplings, flexible waste hose, chain rubber plug etc,all as per drawings, specifications and directions of the Engineer, including all materials, tools, plant and labour etc., complete |
| 14 | Providing and fixing 20 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints (sudhakar/supreme/ prince make) complete as per direction of Engineer in Charge. |
| 15 | Supply of 75 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (sudhakar/supreme/ prince make) complete |
| 16 | Providing and fixingbeveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats withStuds complete all as directed by EIC. |
| 17 | Providing & Laying 2mm thick Poly Vinyl Flooring to be installed with suitable adhesive etc., finishing should be smooth without any undulations including all Etc., Complete all as directed by the EIC |
| 18 | Supply, fix,test and comissioning of 2P,20A, MCB DB with metal enclosure with 2P,20A, MCB as main incomer, as required and directed. App.makes: Legrand/ABB/Schneider/Havells. |
| 19 | Supply, fix, test and commissioning of 18W, ceiling mounted White LED fixture with all accessories (Approved make Wipro/ Jaquar/ philips/ CG/ Havells or Equivalent) |
| 20 | Supply, fix, test and commissioning of 20watt LED Tube light as directed by the engineer incharge. (App .makes CG/Havells/Phillips.) |
| 21 | Surface PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for One point controlled by one switch as directed. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 22 | Surface PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper wires run through PVC pipe and all drops and switch boardsfor One point controlled by one switch.(App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
| 23 | Supply, fix,test & comissioning of 12 modular type switche board along with gang box and 1no -3pin Modular sockets andswitches as directed by engineer incharge. |
| 24 | Supply, fix,test & comissioning of 8 modular type switche board along with gang box and 3nos 5A Modular sockets & switches as directed by engineer incharge. |
| 25 | Supply, fix, test & commissioning of 1phase, 240V, 400 mm sweep Pedestal fan as directed by engineer in-charge. |
| 26 | Supply, fix, test & Commissioning of 20A DP MCB Double door DB with 16A,2P MCB with enclosure for Incomingsupply as directed by engineer in-charge.(App.make: Legrand/ABB/Siemens/Schneider) |
| 27 | Supply lay,test and comissioning of 3½ X 16Sq.mm PVC Armoured Aluminium cable, run along with 8SWG GI wire. (App.makes: Universal/Polycab/KEI/Finolex or Equivalent) |
