|
| 1 | S/F Vitrified Tiles (Kajaria,Beel,J&J or Somani in flooring & skirting laid with 1:3 cement & coarse sand finished with cement slury & pigmnet grouting polishing including supply of all materials, Labour,T&P etc (New Item) |
| 2 | Providing and fixing 6mm china white glazed tiles in flooring in dado or flooring |
| 3 | Excavation in foundation in ordinary soil (Loam clay or sand ) including lift upto 1.50M and lead upto 30M, and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-incharge upto ta distance of 30M from the foundation trenches. S.I.No. 251(a) |
| 4 | Concrete with 4 cm. guage stone ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundation and under floors including supply of all materials, labour Tools & plants etc.required for proper completion of the work. |
| 5 | M-150 Brick work in one cement and four corse sand (1:4 ) in foundation and plinth including supply of all materials labour, T&Petc. Reqd. forproper completion of the work |
| 6 | M-150 Brick work in one cement and four corse sand (1:4 ) in superstructure including necessary cutting & moulding of brick including supply of all materials labour, T&P etc. Reqd. for proper completion of the work. |
| 7 | 12 mm thick cement plaster with cement and corse sand mortar 1:4 over brick work thickness not less than 1cm including of all work complete |
| 8 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat:With common burnt clay F.P.S.(non modular) brick tile of class designation 10 |
| 9 | 2.5 cm thick 1:2:4 plain cement concrete floor with cement concrete floor with cement approved coarse sand and 2 cm graded approved stone grit laid in panels finished with 3mm |
| 10 | R.C.C. Work with cement approved coarse sand and 2 cm. gauge approve stone grit in proportions of 1:2:4 in Light beam having spans upto 6M excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary, centering & shuttering etc. and supply of all material, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. |
| 11 | MS (Tor steel or plain)in plain work such as RCC or RB work including binding for proper shape and including supply of steel & its wastage bend, hooks and authorized overlapping shall be measured and including cost for binding wire. SINo. 504 |
| 12 | Wiring point for light with 1.5 sq.mm FRLSH PVC amulated single core copper conducator cable in supply |
| 13 | Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage |
| 14 | Supply and fixing of recess/surface/pendent mounting round 6 watt 8 watt LED down lighter having Powder coated die |
| 15 | Construction of embankment with approved material (Earth) obtained from borrow pits cartage from 8 km with all lifts and leads, transporting of site, spreading, grading to required slope and compacting to meet requirement of table 300-2 |
| 16 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.as per DSR(E&M)-2022 Sl no.1.31 |
| 17 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.as per DSR(E&M)-2022 Sl no.1.32 |
| 18 | Supplying and fixing brass batten/ angle holder including connection etc. as required.as per DSR(E&M)-2022 Sl no.1.34 |
| 19 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.as per DSR(E&M)-2022 Sl no.2.10.1 Single pole |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20mm dia nominal dia pipes. As per DSR-2023 S.I No.18.8.2 |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 25mm dia nominal dia pipes. As per DSR-2023 S.I No. 18.7.3 |
| 22 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 : As per DSR-2023 S.I No. 18.49.1 |
| 23 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 |
| 24 | Providing and fixing C.P.brass angle valve for wash basin and mixer and geyser points of approved quality confirming to ISI 8931 as per Enginer-in-charge as per S.I.No.21b.22. |
| 25 | P/F white vetreous china pedestal type water closet (European type) standed size ISI marked Hindware or Equivalent with seal and lid,10 litre low level white vitreous china flushing cistren & CP flush bend fitting & CI brackets,40mm flush bend,overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fitting and bracket,cutting and making good the walls and floors wherever required complete as per direction of Engineer-in-charge SI No 21b.1 |
| 26 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required . White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests:As per DSR-2023 S.I No.17.1.1 |
| 27 | s/f of 110 mm dia pvc pipe si 730(a) |
| 28 | s/f of 75 mm dia pvc pipe si 730(b) |
| 29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.As per DSR-2023 S.I No.17.7.4 |
| 30 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe (a) 32mm dia. As per DSR-2023 S.I No.17.28.2.1 |
| 31 | Providing and fixing uplasticised 15 mm nominal bore and 45 cm long connection pipe with brass unions : As per DSR-2023 S.I No. 18.21.2.1 |
| 32 | MS or Iron in Plain work in heavy size such as chokhat Trusses, Built up Gates, Door Frame, Grill including drilling holes, riveting, binding for proper shape and including supply of steel & its wastage, bend, hooks, steel bolt, Nuts etc and their fixing and including supply of all material, labour, tools and plants etc required for proper completion of the work. S.I.No. 503 |
| 33 | Add 18% Gst Please Enable Macros to View BoQ information |
