Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L forvitrified ceramic light shade matte/ Glossy finish tiles 10 mm thick (square /rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour). |
| 3 | M & L Glazed vitrified coloured tiles of 10 mm thick in glossy / matte finish with size 2 x 4 feet (60 x 120 mm)fixed in vertical surface with 10 mm thick backing layer of good quality tile adhesive (MYK Laticrete 325+ / Roff) (qty of water should be mix as per manufacturere\"s instruction) fix to wall, joint shall be kept as 3mm filled with epoxy. to attain the best result 3 mm thick tile spacers to be used,Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immendiatlycomplete in all respect as specified. (Colour and pattern of tile as approved by EIC and work to be execute through skilled labour). |
| 4 | M & L Virified Ceramic tiles light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screed 1:6,complete in all respect as specified. |
| 5 | All as per item No. 4 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed. |
| 6 | M&L for glazed coloured ceramic tiles in dado/vertical surface (300mm x600mm x 7-8 mm)thick fixed with chemical adhesive Fevi Mate of equivalentand joint shall be kept as 3mm filled with epoxy. to attain the best result 3 mm thick tile spacers to be used,Masking tape shall be put before putting the eposy grout & the grout shall be throughly cleaned immendiatly, complete all as specified and directed. |
| 7 | M & L Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr in charge. |
| 8 | M&L cement concrete 25 mm thick in PCC 1:2:4 (20 mm graded aggregates) as in sub base of floors finished fair and even complete all as directed |
| 9 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/wall paneling, blankets, any thickness, including cover fillets and frame complete. |
| 10 | S&F Solid PVC Wall Liningconsisting of 5mm thick single side prelam PVC sheet (colour as approved by Engr-In-Charge) instead of Plain colour PVC sheet inclusive of PVC frame work, solvent cement, screws, fasteners and all required accessories and fixing the sheet at site on PVC frame as per specifications and drawing includingcomplete all as specified and directed. |
| 11 | M & L for providing & fixing semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge |
| 12 | M&L 12mm thick Gypsum board as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed. |
| 13 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.. |
| 14 | M&L for Brick work with sub-class `B\" bricks, straight or curved on plan exceeding6 M mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 15 | M&L for Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in soft/loose soil complete all as specified & directed. |
| 16 | M&L for returning, filling in, includingspreading, levelling, wateringand well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed. |
| 17 | M&L for Removing surplus excavated material to a dist n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified & directed. |
| 18 | M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate)as in foundation filling and mass concrete complete all as specified and directed. |
| 19 | S& F in repair 75mm thick factory made SFRC manhole/ drain covers/ Kitchen GT cover of approved shape & size incl 2 No. of handles complete all as specified and as directed. |
| 20 | Removing building demolished materials / old waste unwanted existing material of any description or any type etc on alternate day to a distance 5 km or beyondout side MOD land complete all as specified and as directed. |
| 21 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 22 | S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 23 | S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 24 | S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 25 | S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 26 | S & F50 mm dia Unplasticised PVC pipes of pressure rating (10 kgf/ cm2) pipe, fixed to walls, ceilings or in floors etc, any type of pipe incl fittings as ends, elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips etc complete all as specified and directed. |
| 27 | S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm / 75 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 28 | S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 29 | S&F 75 mm dia PVC (SWR) floor trap, plain with CP grating 125 mm dia round including jointing with solvent cement fixed with cement mortar including necessary cutting etc complete all as directed |
| 30 | S & F 110 mm PVC (SWR) bends any radius |
| 31 | S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal |
| 32 | S & F 110 mm PVC (SWR) Cowl |
| 33 | S & F 75 mm PVC (SWR) bends any radius |
| 34 | S & F 75 mm PVC (SWR) junction single, (Single T) equal or unequal |
| 35 | S&F 150mm PTMT Symet Bath assestGrating square hole/without holefixed in position over Rain Water Pipe/nahani trap with cement slurry. |
| 36 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 37 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 38 | S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 39 | S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 40 | Dismantling wood of any description Scantling / frame Work / trusses/purlin/ rafter/rails/ festenings /beam/posts/door frames etc of any size and shape complete all as specified and directed. |
| 41 | S&F Steel work in tubular tru-sses of required shape including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 gradeSt.-240,complete all as specified and directed. |
| 42 | Dismantling of Plain or corrugated steel sheeting, polycarbonate sheet or any type of sheet, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 43 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated crimp curvedsteel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness thickness (below or above ground level) anddisposal of all bldg Materials to out side MOD land as per NGT guide line complete all as specified & directed.. |
| 45 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded aggregates) as in plinth protection laid to slope 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and incl all necessary form work to divide the area in panels, finishing exposed edges rough or rounding or chemferring where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by wt.) complete all specified and directed. |
| 46 | M&L for Supply and fixing 18 mm thick 100 % Solid premium quality Action Tesa HDHMR base board pre laminated both side (of approved colour) having density more than 850 kg/cum, fixed with screws as in wall panel, storage cabinet/Vanities/ Cub board and built in modular tables etc, for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length.theedgesof shelf / partation / wall side to be lipped with including 18 mm x 1 mm thick laminated sheet of density 850 kg/cum manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc. (including all necessary brass hardware fitting i.e Soft closing hydraulic hinges, handle, ball catchers including mortice locking arrangement, hole cap including lipping etc, and Channel siliding rail in each Cup board/ Vanities complete incl dismantling of existing all as specified and directed. |
| 47 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 48 | M&L for Onecoats of synthetic enamel painton old woodenSurfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 49 | M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 50 | M&L for Onecoats of synthetic enamel painton old Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 51 | M&L for preparation of Old wall / ceiling surfaces & applying two coat of plastic emulsion paint of any tint, using roller brush complete all as specified and as directed |
| 52 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying one coat ofwall care putty then scrubbing by sand paper to prepare a even surface andapplying priming paint followed by applying two coats of Premium quality anti fungal OBD of any colour complete all as directed. |
| 53 | M&L forcomplete removal of existing treatment from old surfaces of ceiling scrapping by machanical means and applying two coats of Premium quality anti fungal oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed. |
| 54 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required complete all as specified and directed. |
| 55 | M&L for applying two coats of interior wall texture paint of authorised manufacturer/applicator including on new plastered surface incl preparation of surface complete all as specified and as directed. |
| 56 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc |
| 57 | M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finishedand even & fair without using extra cement complete all as specifed & as directed. (Incl new brick work) |
| 58 | M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surfaceeven & Smooth without using extra cement complete all as specifed & as directed. |
| 59 | M&L 5 mm thick plastering in Cement Mortar 1:3 finished even and smooth w/o using extra cement onceilings complete all as specifed & as directed. |
| 60 | M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed. |
| 61 | M&L Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper using roller brush, over a coat of primer and over incl one coat of 1.00 mm thick Birla putty complete all as specified and directed. |
| 62 | M & L for preparing the newly plastered wall surface and applying primer with applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sq( Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. ) complete all as specified and directed. |
| 63 | S&F in repair 30 mm thick 100 % Solid Action Tesa premium quality 3D HDHMR CNC machine cut moulding of required shape, size and design pattern and colour shade, uses for inrerior decoration for wall, door and ceiling with width 2 to 3 inches as per requirement, having density over 850 kg/cum,with durability, moisture resistance, versatility, aesthetic appeal and easy installation properties incl installation preparation of surface and two coat of PU paint of required colour completeincl dismantling of existing all as specified and directed. |
| 64 | S&F in repair 25 mm thick 100 % Solid premium quality HDHMR CNC machine cut 3D wall panels of required design pattern and colour shade uses for inrerior decoration for wall, having density over 850 kg/cum,with durability, moisture resistance, versatility, aesthetic appeal and easy installation properties incl preparation of surface and two coat of PU paint of required colour and installation complete incl dismantling of existing all as specified and directed. |
| 65 | Taking down chowkhat or frame exc 1.5 sqm and n-exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 66 | Taking down chowkhat or frame n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 67 | Taking down chowkatsor frames exc 1.5 sq. m but n exc 4 sq. m, incl after replacing chowkhats the old shutter shall be refixed in same opening complete all as specified and directed. |
| 68 | Taking down Shutters of any exc 1 Sqm but n exc 2.0 Sqm complete all as specified and directed. |
| 69 | S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl Filling hollow of frame with plain cement concrete 1:2:4 complete, as specified and directed. |
| 70 | S & F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl Filling hollow of frame with plain cement concrete 1:2:4 complete, as specified and directed. |
| 71 | S & F IInd Class HW35 mm thick Plain framed, panelled shutter (any No panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated Complete all as specified and directed. |
| 72 | S&F IInd Class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatsComplete all as specified and directed. |
| 73 | S & F 35 mm thick flush shutter solid core constn with block board core and plywood face panels with decorative face veneers both faces with lipping complete all as specified and directed |
| 74 | S&F200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 75 | S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed. |
| 76 | S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 77 | Supply and fixedFloor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 78 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 79 | S&F in repair aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded centre mullion size 41mmx65mmx1.3mm thick partly glazed /guazed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,MS wire mess, 5 mm thick frosted glass etc, provision for fixing the exhaust fan complete all as specified and directed. |
| 80 | S&F in repair glazed and gauzed three trackaluminium powder coatedsliding window of any size made out of Jindal extruded aluminum window classic 18 mm seriesas mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasketand GI fly prrofing and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:-(a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958(b) Shutter : top and sidewith section-20606, interlocking with section-20605and bottom with section-20604 incl all required accessories complete as specified and directed. |
| 81 | Supply and Fixed Aluminium powder coated decorative grill with 6.3 mm thick aluminum section and 100X100mm openings , weighing not less than 1.75Kg/Sqmand anodized aluminium \"U\" shape channelframe work alround the grill andfixed with steel screws complete all as specified and directed. |
| 82 | S and F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tubeusedas per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed. |
| 83 | Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelamMoulded PVC Sheet on the front face 2mmthick plainPVC sheet on back face to be fixed onframe at site as per specification & drawing |
| 84 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.. |
| 85 | Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed. |
| 86 | S & F 4.80 mm thickFrosted glass and glazing with oil putty in square n exc 0.5 Sqm in each pane or rubber beading/putty as required complete all as specified & directed. |
| 87 | Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site to store complete all as specified and directed. |
| 88 | S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed. |
| 89 | S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed. |
| 90 | S&F in repair 20 mm boregun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixedcomplete in all respect as specified and directed. |
| 91 | M&L for Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 92 | M&L for Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 93 | Supply only 5.5 mm selected quality plain glasses of size exc 0.5 sqm in each pane, complete all as specified and directed |
| 94 | Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortarin floor, aprons etc complete all as specified and directed. |
| 95 | M&L for 18 - 20mm thick italian marble (approved colour & Pattern & Size) machine cut fix to wall (incl Skirting) with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for italian marble(MYK Laticrete/ Roff / Tenax etc) with help of 10mm depth groove trowl over incl 15 mm thick layer of cement mortar 1:4and joint filling with epoxy including with admixture of pigment to match with shade of italian marble stone including cutting, polishing and cleaning work complete complete all as specified and directed.Note:-(i) 50 mm thick foam sheet to be used for cutting of marble(ii) Vibrator and 10 mm depth groove trowl and other required tools to be used(iii)work to be execute through highly skilled labour(iv) Marble Adhesive will be approved by Engr-in-Charge before use |
| 96 | M&L for 18 - 20 mm thick italian marble (approved colour & Pattern & Size) machine cut fixed on floor with 10 mm thick backing layer of premium quality adhesive paste (Hardner + Resin) for italian marble(MYK Laticrete/ Roff / Tenax etc) with help of 10mm depth groove trowl over incl 20 mm thick screed bed of cement mortar 1:6and joint filling with epoxy including with admixture of pigment to match with shade of italian marble stone including cutting, polishing and cleaning work complete complete all as specified and directed.Note:-(i) 50 mm thick foam sheet to be used for cutting of marble (ii) Vibrator and 10 mm depth groove trowl and other required tools to be used (iii)work to be execute through highly skilled labour(iv) Marble Adhesive will be approved by Engr-in-Charge before use |
| 97 | M&L Granite (of any type) tiles 20mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 15 mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding,and polishing complete complete all as specified. |
| 98 | M&LMachine cut kota stone slab flooring 20-25 mm thick laid over 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 99 | M&LMachine cut kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and polishing complete all as specified and directed. |
| 100 | Providing edge moulding to 18 - 20 mm thick stone of any description of counters vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and directed. |
| 101 | Demolition cement concrete (reinforced) of any description and in any position complete all as specified and directed. |
| 102 | M&L for reinforced cement concrete (Nominal Mix) type B-1 1:2:4 using 20 mm graded aggregates as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like complete all as specified and directed. |
| 103 | M&L for use and waste of Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick Horizontal or sloping surface for rough finished surfaces of flat concrete complete all as specified. |
| 104 | M&L for Form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide ans sides of RCC/ PCCbands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for rough finished surfaces of concrete complete all as specified. |
| 105 | M&L MS TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clipsall as directed by Engr-in-Charge. |
| 106 | S&F Framed work such as grills, gratings, etc.. with ends of bars shoulderedand/orriveted, orforgedintospikes;framed guardbars;barredirondoors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered/concrete work and match with existing surface complete all as specified and directed. |
| 107 | Supply only Drappery curtain rods decorative type stainless steel 304 Grade, 25 mm nominal diaand having wall thickness 1.40 mm of approved quality/make including fixing oftwo number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods (The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified.(Supply only items 107 to 157) |
| 108 | Supply only 15mm bore dia Blush Gold PVD (Colour Rose Gold) anglular stop cock with wall flangequarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. |
| 109 | Supply only 15mm bore dia 2 way bib cock with wall flange with colour Blush Gold PVD (Colour Rose Gold) including cover plate complete in all respect as specified and directed by Engr-in-Charge. |
| 110 | Supply only 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Blush Gold PVD(Colour Rose Gold) Jaquar Code: KUP-BGP-35233NKPM / Cera Code : F1021474RG / Kohler Code : K-73061T-7-RGD with concealed body for single lever basin mixer wall mounted Jaquar code : ALD-CHR-233N / Cera Code : F4065103RGincl all required accessories/ fixture to make functional complete in all respect as specified and directed by Engr-in-Charge. |
| 111 | Supply only 32 mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Blush Gold PVD (Colour Rose Gold) incl required concealed pipe upto trap with required accessories complete in all respect as specified and directed by Engr-in-Charge. |
| 112 | Supply only 15mm bore dia Exposed part kit concealed stop cock & flush cock (Colour Rose Gold) Jaquar Code : KUP-BGP-35083KPM / Cera Code : F1021351RG / Kohler Code : K-16087IN-4-RGD with fitting sleeve, Operating lever & Adjustable wall flange with seal, with colour Blush Gold PVD incl regular body of concealed stop cock Jaquar Code : ALD-CHR-083 / Cera Code : F4050102 suitable for 15 mm pipe line with protection cap complete in all respect as specified and directed by Engr-in-Charge. |
| 113 | Supply only Antique Copper/ Rose Gold Robe Hookcomplete in all respect as specified and directed by Engr-in-Charge. |
| 114 | Supply only Hand Shower (Health Faucet) with 8 mm dia, 1 meter long flexible tube & wall hook with Blush Gold PVD (Colour Rose Gold) with check nut and washers complete all as specified . |
| 115 | Supply only Toilet roll holder with stainless steel-304 Grade flap with (Colour Rose Gold) Blush Gold PVD paper holder complete in all respect complete as specified and directed by Engr-in-Charge. |
| 116 | Supply only Brass made Towel rack 600 mm long with Lower Hangers, of Colour : Rose Gold complete in all respect as specified and directed by Engr-in-Charge. |
| 117 | Supply only Brass made Liquid Soap Dispenser with glass bottle with (Colour Rose Gold) complete in all respect complete as specified and directed by Engr-in-Charge. |
| 118 | Supply only PVC connections 15mm size with PTMT steelnuts of length 450 mm complete in all respect as specified and directed. |
| 119 | Supply only 712 mm dia round mirror mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete in all respect as specified and directed. Make : Jaquar Code: (K-26050-BGL) |
| 120 | Supply only Aquamax Exposed part kit of Thermostatic shower mixer with 3-way diverter Jaquar Code: KUP-BGP-35683PM/Kohler Code:K-26347IN-9-RGD with Colour : Blush Gold PVD (Rose Gold), incl Kubix prime bath Spout with wall flange Jaquar Code: SPJ-BGP-35463PM / Kohler Code : K-23511IN-RGDwith Aquamax concealed body of thermostatic shower mixer with 3 way diverter Jaquar Code : ALD-CHR-683 / Kohler Code : K-26341IN-NA Maze overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Sttainless steel ) with rubit Cleaning Syatem Jaquar Code: OHS-BGP-1639PD / Kohler Code : K-9301IN-ZX-RGDof colour : (Rose Gold) Blush Gold PVD, incl two No. of watertile/ bodyspray of 54 nozzle body spray in rose gold Jaquar Code: BSH-BGP - 1771/ Kohler Code : K-8002IN-ZY-RGD, incl Maze Metal hand shower 90x90mm Square Shape single flow with rubit cleaning Jaquar Code: HSH-BGP-1655PD/ Kohler Code : K-97009IN-RGD , Over head Shower arm 600x25x25 mm Square Shape for wallmounted Showers with Flange Jaquar Code : SHA-BGP-455L600 /Kohler Code : K-16346IN-RGD , Flexible tube for hand shower 8 mm dia & 1.5 M long with nuts Jaquar Code: SHA-BGP-549D8/ Kohler Code : K-11628IN-RGD,wall outlet with shower hook in square shape Jaquar Code: SHA-BGP-566SPD / Kohler Code : K-9040T-RGD incl cover plate, adjusting leg, concealed diverter and all required accessories/fixture complete in all respect as specified and directed by EIC Note : The quoted rate includes suitable arrangement / pressure pump to maintain required pressure of water supply for 3-way diverter to make functional of Body spray, Over head shower and hand shower. |
| 121 | Supply only Brass Made Double Coat Hook with Colour : Rose Gold complete in all respect as specified and directed by Engr-in-Charge. |
| 122 | Supply only Thin Rim Table top basin of size: 360x360x120 mm Jaquar code : SLS-WHT-6905/ Cera Code :A2020124SN /Kohler Code : K-90012T-0 in white colour with Click clack waste 32 mm size full thread with 130 mm height Colour Rose Gold Jaquar Code: ALD-BGP-727L130/ Cera Code :F8050301 /Kohler Code : K-20746IN-CP modern design with Round shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete in all respect as specified and directed |
| 123 | Supply only SLS-WHT-6953BIUFSM (Size : 375x520x400 mm) / Cera Code : A1044116 (Size : 600x410x430 mm) /Kohler Code : K-16817IN-SS-0 in white colour Rimless, Blind Installation Wall Hung WC with UF soft close cover, Hinges and accessories set,incl single piece slim concealed cistern body in white finishJaquar code: JCS-WHT-2400 / Cera Code :D1110105 /Kohler Code : K-26353IN-P-NA, Pneumatic tank 3/6L with full frame with installation kit with Pneumatic faceplate flush control plate kubix Jaquar code: JCP-BGP-352415 / Cera Code :D1120121 /Kohler Code : K-75890IN-P-RGD of colour Blush Gold PVD incl required accessories and fixture, making all connection to make it functional incl make good complete in all respect as specified and directed. |
| 124 | Supply only CP grating of required size and shape and colour, fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as directed. |
| 125 | Supply only white vitreous china battery based infrared senser operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. |
| 126 | Supply only 15mm bore sensortonic senser faucet cromium plated swan neck/high neck for washbasins deck mounted complete with controll Box (Battery operated) all as specified & directed. |
| 127 | Supply only Double action floor spring, hydraulically regulated, made out of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete for glass/aluminium door complete all as specified and as directed. |
| 128 | Supply only Vitreous China wash down water closet pan(S-Trap/ P-Trap) 1st quality Semi pedestal pattern (Anglo-Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified. |
| 129 | Supply only PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CPFlush pipe of Low level cistern complete all as specified. |
| 130 | Supply only china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with intergral foot rests, cast iron\"S\" trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed. |
| 131 | Supply only Square shape Hindware fonte ceramic table topwash hand basin Star white Italian collection (Model No. 91043of size 61 x 46 x 15 Cm on 18 mm thick granite (colour as approved) machine cut as in platforms, bedded andjointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings complete in all respect as specified and directed. |
| 132 | Supply only floor mountedcoupledstar white one piece water closet (Pedestal pattern)(Italian collection) premium class of cat part No 92551 (S-22) 70 x 38 x 73 Cm with P or S of size 220 mm, EWC with inbuilt sensor for touchless flushing, ensure more hygiene, slow falling seat cover, Elegant design, Easy clean, I trap including soft closed seat cover, hinges fixing accessories set and accessories set,inclflushing cistern, with cistern fittings connection to drain or (outgoing pipe) & to flushing pipe anti syphonage pipe etc. complete in all respect as specified and directed. |
| 133 | Supply only 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified. |
| 134 | Supply only Hindware Amazon 15mm bore dia chromium plated Brass single lever basin Mixer, (Item code : F-570012)round spout with popup Waste assemlywith 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. (Make:-Hindware CAT Part No:F-570012 or equivalent in Kohler / Jaquar |
| 135 | Supply only chromium platedhealth faucet (Brass) with double Lock including wall Hooks & flexible pipe 15mm bore hose connecting pipe 1.2 m longwith check nut and washers complete all as specified . |
| 136 | Supply only chromium plated finish paper holder complete in all respect complete as specified and directed by Engr-in-Charge. |
| 137 | Supply only PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed. |
| 138 | Supply only peg setof 6 fixedwith rawal plug all as specified and directed. |
| 139 | Supply only Hindware Cat No. F-840004 Soap Holder (Brass)with tumber holderall as specified and directed. |
| 140 | Supply only One piecewhite Wash Basinwith full Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. |
| 141 | Supply only 32 mm bore PVC waste pipe for WHBcomplete all as directed |
| 142 | Supply only 40 mm bore PVC waste pipe for urinals/sink complete all as directed |
| 143 | Supply only waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as directed |
| 144 | Supply only waste fittings brass chromium plated 40 mm bore for stainless steel sink/urinals complete all as directed |
| 145 | Supply only 600 mm long C P finish CP Towel Bar complete in all respect as specified and directed by Engr-in-Charge. |
| 146 | Supply only chromium platedcast copper alloy angle valve fancy type with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as directed. |
| 147 | Supply only 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. |
| 148 | Supply only FullGlass Shelf 450 mm (with brass brackets) complete all as specified and directed. |
| 149 | Supply only corner Glass Shelf300mm (with brass brackets)complete all as specified and directed. |
| 150 | Supply only 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood plated brass screws and cup washers complete all as specified and directed. |
| 151 | Supply only brass mortice lock 65 mm 6 lever vertical type with duplicate key and handle set complete all as specified and directed. |
| 152 | Supply only 15mm bore brass CP wall mixer (2 -in - 1 type) with L bend (provision for over head shower) fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed by EIC. |
| 153 | Supply only brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 154 | Supply only sinks with drainage board made of stainless steel 304 grade1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including PVC waste pipe and cp waste fitting.overall size 915mmx460mm bowl size 410mmx330mmx160mm to be fix in the concrete slab and make good the damage portion complete all as specified and directed. |
| 155 | Supply only Stain less steel plate rack made of stainless steel 1mm thick of grade 304, size 900mmx 600mmx250mm complete all as specified and directed. |
| 156 | Supply only vertical venation blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminium top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed. |
| 157 | Supply only roller blinds of any size and any colour (non-blackout series) with aluminium head rail,with chain operation complete all as specified and directed by Engr-in-Charge. |
| 158 | Removing spot blockage of WC / nahani trap / gully trap/GT/Manholes including disposalof material obtained from cleaning to a distance complete all as spd and directed. |
| 159 | Fixing only in adjustment & repairs / replacement of all following joinery fittings, joinery items brass butt hinges, hydraulically regulated door closer, brass mortice lock, , door stopper, aluminium D type handles, tower bolts,sliding door bolt, aluminium door pivots, drawer locks, drawer channels & petty repairs like taking down & refixing, easing of doors etc complete all as specifiedand as directed. |
| 160 | Fixing only in adjustment & repairs / replacement of all following sanitary fittings, plumbing items leaking to stop-cock, bib-cock, swan neck tap, pillar-cock, gate valve, PVC connection, CP connection, CP 2 way and 3 way connection of auto flush for urinals from union, speeder etc by replacing the worn out rubber / PVC washer for 15 mm bore, making fully functional the leaking flushing cistern single / double symphonic type of any description of any size and taking down carefully chromium plated bottle trap, waste coupling, PVC / GI Waste pipe of size 32 / 40 mm dia waste water connection to WHB / urinals, senser taps,etc and removing all accumulated materials from the trap etc cleaning properly and refixing in the same position complete all as specifiedand as directed.Note for item No 158,159 & 160(i) The rates quoted in the above item includes cost ofT & P & petty materials for repairs like Nails, Screws, fevicol etc complete.(ii)Adequate tradesman /supporting manpower shall be deployed by contractor and they shall be present on all working days including Saturdays and holidays from 0930 hrs to 1800 hrs for maintenance of above mentioned work. The The supervisor /site engineer of the contractor shall be forwarded detailed insturctions by concerned AGE/JE every morning for attending complaints on daily basis. The persons shall be detailed by AGE concerned every morning for attending complaints on daily basis.(iii) The material required will be paid seprately under respective item of this BOQ supply only.(iv)The complaints shall be attendedon the day the complaint received before 1300 hrs. The complaints received after 1400 hrs will be attended on the other day before 1300 hrs. If complaints are not attended as per schedule a penalty of Rs. 500/- shall be imposed on contractor for each complaint for each day.(v)Any delay in non-completion of complaints will be immediately communicated to AGE/JE.(vi) Complaint register & complaints slips shall be maintained by the contractor rep. After completion of complaint the rep of contractor shall obtained feedback and signature of user. Payment against these items shall be made after due verification of complaint register & complaint slips by JE & Engineer-in-Charge. |
| 161 | 1. Note :- The work described in these items shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes where required, for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates.2. Note :- Removing building materials /old waste unwanted existing material of any description or any type etc.on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates.3. Note:- (for Supply only item 107 to 157)Item as per Make and Cat No as mentioned in description will be supplied only. |
| 162 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power, submain etc) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed. |
| 163 | Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed. |
| 164 | Taking down ventillation fan and ceiling fan complete all as specified and directed. |
| 165 | M&L for point wiring concealed type for Modular fitting with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC Concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box,modular white cover plate with frame, blanking plate etc suitable for upto required module etc complete and making good disturbed surfaces to match theexisting for one light / bell / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed. |
| 166 | M&L point wiring for Normal Flush type Piano switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn throughconcealed Conduit 20 mm as requirement of siteincluding replacement of 3 mm thick phenolic laminated sheet top covers on and includingsunk type CI/steel terminal boxes concealed in wall including 1.5 Sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dollyfor One light/ fanpoint controlled by one switch 5 Amps one way single polecomplete all as specified and directed. |
| 167 | All as per item No. 166 here in before but for one three pin, 5 Amp, socket out let on same board completeall as specified and as directed. |
| 168 | All as per item No. 166 here in before but for one lightpoint controlled by two Nos, two way switches completeall as specified and as directed. |
| 169 | All as per item No. 166 here in before but point wiring with 2.5 Sqmm,multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor completeall as specified and as directed. |
| 170 | All as per item No. 166 here in before but point wiring with 4 Sqmm,multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor completeall as specified and as directed. |
| 171 | S&F in replacement modular cover plate with frame, 1 or 2 module completeall as specified and as directed. |
| 172 | S&F in replacement modular cover plate with frame, 3 modules completeall as specified and as directed. |
| 173 | S&F in replacement modular cover plate with frame, 4 modules completeall as specified and as directed. |
| 174 | S&F in replacement modular cover plate with frame, 6 modules completeall as specified and as directed. |
| 175 | S&F in replacement modular cover plate with frame, 8 modules completeall as specified and as directed. |
| 176 | S&F in replacement modular cover plate with frame, 12 modules completeall as specified and as directed. |
| 177 | S&F in replacement modular PVC flush box, 1 or 2 modules completeall as specified and as directed. |
| 178 | S&F in replacement modular PVC flush box, 3 modules completeall as specified and as directed. |
| 179 | S&F in replacement modular PVC flush box, 4 modules completeall as specified and as directed. |
| 180 | S&F in replacement modular PVC flush box, 6 modules completeall as specified and as directed. |
| 181 | S&F in replacement modular PVC flush box, 8 modules completeall as specified and as directed. |
| 182 | S&F in replacement module PVC flush box, 12 modules completeall as specified and as directed. |
| 183 | S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, comply IS 3854:1997 completeall as specified and as directed. |
| 184 | S&F in replacement modular switch, 2 way, 6 Amp, 1 Module, comply IS 3854:1997completeall as specified and as directed. |
| 185 | S&F in replacement modular bell push, 6 Amp, 1 Module comply IS 3854:1997completeall as specified and as directed. |
| 186 | S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module comply IS 1293:2019 completeall as specified and as directed. |
| 187 | S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, comply IS 3854:1997 completeall as specified and as directed. |
| 188 | S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module comply IS 1293:2019completeall as specified and as directed. |
| 189 | S&F in replacement modular Fan step regulator, 120W - 2 module completeall as specified and as directed. |
| 190 | S&F in replacement Plug Top, 5 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connectingcompleteall as specified and as directed. |
| 191 | S&F in replacement Plug Top, 15 Amps, 230 Volts, white, polycarbonate body, 3 pin type, including connectingcompleteall as specified and as directed. |
| 192 | S&F in replacement Lamp holder, white, Polycarbonate body, with back plate, suitable for batten fittings, fixed in position & connecting completeall as specified and as directed. |
| 193 | S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt,fixed in position & connecting completeall as specified and as directed. |
| 194 | S&F in replacement Bell ding dong, AC, 230 Volts, fixed in position & connecting completeall as specified and as directed. |
| 195 | Supply and fix Switch Piano type, white polycarbonate body, single pole, one way 5 amp, 230 V, including connecting complete. |
| 196 | Supply and fix Switch Piano type, white polycarbonate body, single pole, one way 15 amp, 230 V, including connecting complete. |
| 197 | Supply and fix Socket outlet 2 in 1, 3 pin, 5 and 15A - 230 V, Multipurpose flush type, including connecting complete. |
| 198 | Supply and fix Socket outlet 2 in 1, 3 pin, 5A,230 Vincluding connecting complete. |
| 199 | Supply and fix stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connecting complete. |
| 200 | S&F in replacement sub main wiring with 2 runs of1.5 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including existing 20 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 1.5 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:-(Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 201 | S&F in replacement sub main wiring with 2 runs of2.5 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including existing 20 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 2.5 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:-(Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 202 | S&F in replacement sub main wiring with 2 runs of4 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including existing 20 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:-(Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 203 | S&F in replacement sub main wiring with 2 runs of6 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including exiting 25 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 204 | S&F in replacement sub main wiring with 4 runs of10 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including existing 32 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 10 Sqmm size PVC insulated copper conductor complete all as specified and as directed.Note:- (Four run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 205 | S & F in repair for distribution board double door type, SPN, 12 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 206 | Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to2.5KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 207 | Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to2.5KV . Total system Lumen of 20W Led should be2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 208 | S&F in replacementBldgsecurity light fitting LED 45 Watt, highly efficient IP66 LED,high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution withelectric connection with suitable size of PVC insulated copper wireincluding GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. |
| 209 | S&F in replacement capacitor 2.5 Mfd complete all asall as specified and as directed. |
| 210 | S& F PVC Ventilation fan 250 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. |
| 211 | S& F metalllic Ventilation fan 300 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. |
| 212 | Supply & fixing ofBLDC ceiling fan complete with blades, down rods, Min air delivery 210 CFM with service value 6.00 BEE , 5 star rating(White colour)230 V, 1200 mm sweep, speed 340 RPM , having rod length 300 mm complete all as specified and directed by Enggr in charge. |
| 213 | Cutting chases, pinning in, including making good in cement mortar 1:3 including painting to match with the existing surface as in edges of landings, steps, cills, sunshades, shelves, lintels, etc; and for concealed conduit wiring, etc, cutting not exc10 cm girth complete all as specified and as directed. |
| 214 | S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. |
| 215 | S & F in repair MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed. |
| 216 | S & F in repair MCB DP, 240 Volts, 40 Amps complete all as specified and directed. |
| 217 | S & F in repair MCB SP, 240 Volts, 16 Amps complete all as specified and directed. |
| 218 | S & F in repair MCB SP, 240 Volts, 10 Amps complete all as specified and directed. |
| 219 | S & F in repair MCB SP, 240 Volts, 25 Amps complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
