|
| 1 | Excavation in trenches n.exc. 1.50 m in depth and n.exc. 1.50 m in width getting out in soft/loose soil complete all as specified and directed. |
| 2 | M & L for Cement concrete in foundations,filling and mass concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) complete all as specified and directed. |
| 3 | S & F for TMT bars mild steel bars 10mm dia and over cut to length bent to shape required including ranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specfied and directed. |
| 4 | M & L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 5 | M & L of formwork for flat rough finished surfaces of concrete to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 6 | M & L for RCC type B-1 (1:2:4) (using 20mm graded stone aggregate) in foundation, including rafts footings, foundation beams, plinth beams: bases for columns, etc: basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 7 | M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular rough finished surfaces of concrete complete all as specified and directed. |
| 8 | M & L for RCC type B-1 (1:2:4) (usingn20mm graded stone aggregate) in columns pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M & L formwork to sides and soffits of floor or roof beams beam haunching girders, bressummers lintels cantilevers, shelves including sup ports overhangs etc also splays between floors and beams etc for flat rough finished surfaces of concrete complete all as specified and directed. |
| 10 | M & L for RCC type B-1 (1:2:4) (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed for flat rough finished surfaces of concrete complete all as specified and directed. |
| 11 | M & L formwork to chullah hoods chajjas troughs and similar items including edges complete all as specified and directed. |
| 12 | M & L for RCC Chujjas type B-1 (1:2:4) (using 20 mm graded stone aggregate)supported on walls, beams. complete all as specified and directed. |
| 13 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed and directed. |
| 14 | M & L for RCC slab type B-1 (1:2:4) (using 20 mm graded stone aggregate)supported on walls, beams and columns in floors, roofs landings, balconies canopies deck slabs and in shelves and the like complete all as specified and directed and directed. |
| 15 | M & L for brick work with sub class ‘B’, old size burnt bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed and directed. |
| 16 | M & L for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces and finished even & smooth without using extra cement complete all as specified and directed. |
| 17 | M & L for rendering 15mm thick cement mortar (1:6) on other than fair faces of brick or concrete surfaces and finished even & smooth without using extra cement complete all as specifiedand directed. |
| 18 | M & L for rendering on ceiling 5mm thick cement mortar (1:3)on fair faces of concrete surface even smooth without using extra cement complete all as specified and directed. |
| 19 | M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of Priming plastered and other surfaces with alkaliresistant priming paint complete all as speciifed and directed. |
| 20 | M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting on plastered surfaces preparatory distempering complete all as specified and directed. |
| 21 | M & L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of chalk whiting on plastered surfaces preparatory distempering complete all as specified and directed. |
| 22 | M & L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 23 | M & L for 100 mm thick plain cementconcrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub-base of floors & in plinth protection, the surface of concrete fair and even complete all as specified and directed. |
| 24 | M & L for 50 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in sub bases of floors,finished the surface of concrete fair and even , complete all as specified and directed. |
| 25 | M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed. |
| 26 | M & L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for joint free non skid tiles complete all as specified and directed. |
| 27 | M & L for Glazed ceramic cloured tiles on vertical surfaces 350x250x7mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 28 | S & F presssed steel frames of size 105 X 60 MMfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 29 | S & F 40mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 30 | M & L for two coats of synthetic enamel paintover a coat of red oxide primer to new steel surfaces including preparation exc 10 cm width or girth complete all as specified and directed. |
| 31 | M & L for preparing of newuntreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified and directed. |
| 32 | M & L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 33 | S & F rolled MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hingers or steel hanging door fittings (exclusive of steel sheeting or other coverifng running drails and guides and hanging; also fastening and fixing with Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. |
| 34 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, S&F in opening as per specification and drawing complete all as specified and directed. |
| 35 | S & F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingcomplete all as specified and directed. |
| 36 | S & F butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed. |
| 37 | S & F Aluminium anodized barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed. |
| 38 | S & F Aluminium handles, cast type, anodized, 150 mm size , complete all as specified and directed. |
| 39 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 40 | S & F MS Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed. |
| 41 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 42 | M & L for 20mm thick Black Marble tiles machine cut in skirting/dado/steps laid over cement screed (1:6) and jointed with grey cement slurry including cutting and polishing complete all as specified and directed. |
| 43 | S & F vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe incl Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 44 | S & F in 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve withPVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed. |
| 45 | S & F vitreous china urinals, bowl flat back (back or corner wall type), size 465x355x265mm white (Minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 46 | S & F vitreous china white wash hand basin (flat back or angle back type) of size 550 x 400 mm including CI/MS brackets, cutting for and pinning in ends of brackets or erecting stand ,brass CP waste coupling & waste pipe complete all as specified and directed. |
| 47 | M & L for looking mirror size 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 48 | S & F 15mm bore chromium plated fancy type bib tap ofcast copper alloy with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 49 | S & F 15mm bore chromium plated, fancy type stop alves/ angle valve cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed complete all as specified and directed. |
| 50 | S & F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 51 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and fixing in pipe etc. complete all as specified and directed. |
| 52 | S & F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed. |
| 53 | S & F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed. |
| 54 | S & F PVC (SWR) bends any radius 110mm dia with access door complete all as specified and directed. |
| 55 | S & F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed. |
| 56 | S & F PVC (SWR) bends any radius 75mm dia with access door complete all as specified and directed. |
| 57 | S & F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed. |
| 58 | S & F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed. |
| 59 | S & F 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed. |
| 60 | S & F Soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed. |
| 61 | S & F grating square 150mm size of PTMT.(Minimum weight 100gms) complete all as specified and directed. |
| 62 | S & F 32 mm dia PVC waste pipe for WHB/Urinal90 cm long with union, complete all as specified and directed. |
| 63 | S & F 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specified and directed. |
| 64 | Returning, filling in including spreading, levelling, watering and well ramming in layers in not exc 25 cm complete all as specified and directed. |
| 65 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 66 | S & F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm Ball brass valve, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed,Nipple suitable for HDPE water tank (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed. |
| 67 | M & L for Vitrified ceramic tiles 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 68 | M & L for anodized aluminium sliding window (bombay sliding window) made out of hollow section as mentioned below and glazed with tinted colour glass 4 mm thick, fixed with glazing clips, rubber beading/gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminium tower bolt 150mm long etc complete all as specified and directed by Engineer in charge.. Shutter top & bottom size 37.50x15x1.60mm shutter inner lock size 37.50x15x1.60mm shutter side (handle) side 37.50x15x1.36 mm chowkhat bottom size 50.30x26x1.20mm chowkhat top and sides size 30x26x1.00mm complete all as specifed and directed. |
| 69 | S &F MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 70 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 71 | Demolition of Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 72 | M & L for sound proof paneling of GI frame and pre-painted perforated calcium silicate board 8mm thick size 2430x1200mm backed with non woven tissue on the back side having density 790-850kg/cum water resistant,non combustible(fire proof) as per BS 476 part-IV,termite resistant and thermal conductivity 0.15w/m 0KCin approved design with 50mm resin bonded mineral wool backing of 48kg/m3 density. including providing and fixing of frame works made of special section power pressed/roll from GI sheet with zinc coating of both side channel 50mm wide having equal flanges of 32mm and 0.55mm thick,fixing to be floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.55mm thick ,fixed to the floor and ceiling at the pacing of 610mm centre to centre with dash fastener of 12.5 mm dia meter 50mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.55mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts,including fixing of studs along both end of wall lining fixed flush to wall/column with suitable ancher fastener or metal screws with nylon plugs at spacing of 450mm centre to centre.studs of 48mm wide having one flange of 34mm and other flange 36mm and 0.55mm thick is to be provided at 1220mm centre to make frame work as grid of size 1220x610mm including filling of cavity with 48kg/cum density &50mm thick mineral wool.perforated calcium silicate board is to fixed to facing side of frame work by 25mm long dry wall self tapping screws with under head cutter on studs floor and celing channels at the spacing boards ar per approved design complete all as specified and directed. |
| 73 | M & L for sound proof 8mm pre-painted perforated calcium silicatefalse ceiling tiles size-595x595mm backed with non woven tissue on the back side having density 790-850kg/cum water resistant,non combustible as per BS 476 part-IV,Termite resistant and themal conductivity 0.15w/m 0KC in approved design(Calsi micro square/calsi sand textured in hole) to be laid over grid and NRC of >0.85with 50mm resin bonded mineral wool backing of 48KG/M3 Density all as specified by Engr-in-charge fixed celing tiles in horizontal level ,suspended on 15mm black groove inter locking metal gridn of hot dipped galvanized steel section consisting of main \"T\" runner with suitably spaced joints to get required lenght and of size 15x38mm made form 0.30mm thick(minimum)sheet ,spaced at 1200mm long spaced between main \"T\" at 600mm centre to center to form a grid 1200x600mm and secondary cross \"T\"of length 600mm and 15x38mm made of 0.30mm thick (minimum)sheet to be interlocked at middle of 1200x600mm panel to form of 600x600mm and wall angle of size 20x15x0.40mm and laying false celing tiles of approved texture in the grid including requied cutting /making,opening for services like diffusers,grills,light fitting fixtures ,smoke detectors etc.main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable road with galvanised butterflylevevl clips of 85x30x0.8mm spaced at 1200 centre to centre along main T.The bottom of T-section having exposed width of 15mm shall be pre-painted with polyester paint and a black groove running in length at centre complete all as specified and directed. |
| 74 | S & F aluminum alloy powder coated door/partition made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site.Chowkhat Frame:- 101.60x44.45x1.60mm, Shutter verticle style :- 85x44.45x1.56mm, Shtter middle Rail :- 83.50x44.45x1.54mm, Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm. |
| 75 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry and pointed complete all as specified and directed. |
| 76 | M & L for PCC (1:2:4) Type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 77 | M & L for providing cement concrete (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 78 | M & L for providing and laying of 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 79 | M & L for point wiring with 1.5 Sq mm nominal area PVC insulated and unsheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including PVC rigid concealed conduit (heavy grade) including chases cutting as required on site and conduit accessories along with continous earth wire 1.5sqmm PVC insulated and unsheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and including cadmium plated sunk Modular metal flush boxes for modular switchescomplete all as specified and directed.One light point controlled by one switch one way. Note:- Modular white cover and plate with frame will be measured and paid saperately under respective item. |
| 80 | All as per Item No 79.00 here-in-before but One celling / Exhaust fan point controlled by one switch one way complete all as specified and as directed. |
| 81 | All as per Item No 79.00 here-in-before but One socket out let 5 Amps 5 pin on independent board complete all as specified and as directed. |
| 82 | All as per Item No 79.00 here-in-before but One socket outlet 5 Amps 5 Pin on same board with other switches complete all as specified and as directed. |
| 83 | All as per Item No 79.00 here-in-before but for one light point controlled by two way switches complete all as specified and as directed. |
| 84 | All as per Item No 79.00 here-in-before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed. (circuit to be laid separately). |
| 85 | S & F modular socket 6A/16 A-2/3 pin combined 2 module complete all as specified and as directed. |
| 86 | S & F modular switch 1 way 16 amps 1 module complete all as specified and as directed. |
| 87 | S & F modular switch 1 way 6 amps1 module complete all as specified and as directed. |
| 88 | S & F modular switch 2 way 6 amps1 module complete all as specified and as directed. |
| 89 | S & F Fan step regulator 100 W, 2 module complete all as specified and as directed. |
| 90 | M & L for point wiring with 1.5 Sq mm nominal area PVC insulated and unsheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including stove enamelled steel conduit including chases cutting andconduit accessories along with continous earth wire 1.5 sqmm PVC insulated and unsheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and includingModular GI sunk metal flush boxes for modular switchescomplete all as specified and directed.One light point controlled by one switch one way. Note:- Modular white cover and plate with frame will be measured and paid saperately under respective item. |
| 91 | S & F white modular cover plate 1 module with frame for fixing of modular switches complete all as specified and directed. |
| 92 | All as per Item No 91.00 here-in-above but for2 module complete all as specified and directed. |
| 93 | All as per Item No 91.00 here-in-above but for3 module complete all as specified and directed. |
| 94 | All as per Item No 91.00 here-in-above but for4 module complete all as specified and directed. |
| 95 | All as per Item No 91.00 here-in-above but for6 module complete all as specified and directed. |
| 96 | All as per Item No 91.00 here-in-above but for8 module complete all as specified and directed. |
| 97 | All as per Item No 91.00 here-in-above but for12 module complete all as specified and directed. |
| 98 | S & F modular blank spacer plate for single module complete all as specified and directed. |
| 99 | S & F ceiling rose including pvc round sheet surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed. |
| 100 | S & F MCB distribution board single pole and neutral 8 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail complete including making good disturbed surfaces of walls, floors, etc. including copper thimble and lugs proper crimping with crimping tool complete all as specified and directed. |
| 101 | M & L in replacement for sheet metal DB for MCBs, SPN, 12 ways 240 v, double door, single phase, with copper bus bar, neutral bar/ connectors/ earth link suitable copper thimbles, lugs etc complete all as specified and diredted.Make: EKINOX3 series of Legrand/Acti 9 metalic series of Schneider/Optipro of Indoasian/Osafe of HPL/Metallica of Havells or equivalent in ABB/ Siemens/ Hager. |
| 102 | S & FIsolator SPN 63 Amps 10 KA rating,415 Volts C Curve type complete all as specified and directed. |
| 103 | S & FIsolator SPN 40 Amps 10 KA rating,415 Volts C Curve type complete all as specified and directed. |
| 104 | S & FMCB SP 06-32 Amps 10 Amps 10 KA rating,240 Volts C Curve type complete all as specified and directed. |
| 105 | S & FMCB SP 16-20 Amps 01 module fitted in modular frame for powerpoint complete all as specified and directed. |
| 106 | S & F sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm 1100 volts grade and including 25 mm diaPVC rigid concealed conduit (heavy grade) including chases cutting as required on site with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 4 sqmm for earth continuity conductor complete all as specified and directed. |
| 107 | S & F LED light fitting 60 Watt 4 feet flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 108 | S & F 20 Watt 6500K LED batten 2000 lumens cool light fitting with extruded aluminium housing four feet with integrated LED & electronic driverand all accessories pre-wired including connecting up complete all as specified and directed. |
| 109 | S & F in replacement of LED mirror light fitting, 10 Watt, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre-wired including connecting up complete all as specified and directed. |
| 110 | S & F bulkhead fitting with driver 5700k, 10 watt capacity, IP 65 rating along with with die cast aluminium housing with complete assembly and PC opal diffuser for uniform illumination suitable for wall/surface mounted complete all as specified and directed. |
| 111 | S & F energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35/25 watt LED bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection,surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of 25mm bore of suitable length and MS clamp duly painted with two coats of Aloxide paint complete all as specified and directed. |
| 112 | S & F in replacement BLDC Ceiling Fan complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fan sheet, fabricating and fixing ofFan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessarynuts and bolts including taking down oldfans and deposited to MES store yard complete all as specified and directed. |
| 113 | S & F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, frame and louvers made of MS powder coated ( 1.2 mm thick) sheet frame having aluminium flappers completeincluding making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering complete all as specified and directed. |
| 114 | S & F wall mounted fan with thermal overload protection, voltage 230V, 50 Hz, Copper winding of sweep 400mm, 1330 RPM With ABS blades and improved design, multi-directional breeze, low noise operation and connecting up ceiling rose to connector block of fan, including all fittings complete all as specified and directed. |
| 115 | S & F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.. |
| 116 | M & LEarthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, surrounded from all sides by 15 cm thick packed layer of Charcoal dust & common salt filled in alternate layers and electrode, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connection to earthing test point & earth dolly and further connected to LT Panels/ MCB DBs in light grade 15mm GI Pipe and including watering pipe medium grade GI 20mm bore & protection GI pipe light grade 15 mm bore, including wire mesh, funnel, lugs, salt, charcoal dust, excavation in any type of soil, returning filling & removal of surplus soil upto 50mtr, pit chamber shall be of PCC (1:2:4) type B-1 (using 20 mm graded mechanically crushed stone aggregates) and pit cover slab 40mm thick shall be of Precast RCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregates reinforced with XPM weighing not less than 4Kg/sqm including necessary form work complete all as shown in electrical plate No 3 of SSR Part-I, including testing on completion at site complete all as specified and directed. Notes:- (i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO.(ii) On testing if the desired earth resistance is not obtained, earthing will be generated at no extra cost, till the desired earth resistance is obtained. |
| 117 | M & L for point wiring with 1.5 Sq mm nominal area PVC insulated and unsheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including stove enamelled steel conduit including chases cutting andconduit accessories along with continous earth wire 1.5 sqmm PVC insulated and unsheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and includingModular GI sunk metal flush boxes for modular switchescomplete all as specified and directed, One light point controlled by one switch one way. Note:- Modular white cover and plate with frame will be measured and paid saperately under respective item. |
| 118 | All as per Item No 117.00 here-in-before butfor One ceilling fan point controlled by one switch one way complete all as specified and directed. |
| 119 | All as per Item No 117.00 here-in-before butfor One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size complete all as per specified and directed. |
| 120 | All as per Item No 117.00 here-in-before butfor One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sq.mm size complete all as per specified and directed. |
| 121 | All as per Item No 117.00 here-in-before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed. (circuit to be laid separately). |
| 122 | S & F modular socket outlet 2/3 pin, 6 Amps combined 2 module complete all as per specified and directed. |
| 123 | S & F flame proof ceilling fan 1200mm sweep 56inch or 48 inch dia, Lm6, Aluminum enclosure,IP 65 weather protection Powder coated azardous area gas group IIA, IIB Zone 1 & Zone 2 along with down rod and flame proof regulator 3 step complete all specified and directed. |
| 124 | M & L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm 1100 volts grade and including steel conduit including chasing chases cutting as required with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 4 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring complete all as specified and directed. |
| 125 | S & F metal sheet enclosure with socket plug top and MCB Single pole and neutral with two pin and earth plug with SP MCB 20 Amps 240 volts complete as specified and directed. |
| 126 | S& F modular fan step regulator, 120 W-1 module complete all as specified and directed. |
| 127 | M & L for XLPE insulated, PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with strandedaluminium conductor of size 16 sqmm 2 core complete laid in trenches/pipes/ culverts/ under roades/ along wallcomplete all as specified and directed. |
| 128 | M & L for High density polyethylene pipes (HDPE) 20 mm of pressure rating 6 kgf/cm2 laid in trenches or fixed on wall/floor for protection of UG cable complete all as specified and directed. |
| 129 | S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stailized at 230V with accuracy of + 2.5% and of capacity 03KVA complete all as specified and directed. |
| 130 | S & F 2 mm thick high grade steel stand duly painted with two coats of synthetic enamel paint over a coat of red oxide primer for outer unit of Split AC with suitable fasteners complete all as specified and directed. |
| 131 | Supply, install,test and commisssioning reversible type (Hot and cool) split air conditioningunit, 1.5 Ton ,3 star, eco friendly refrigerant complete with drive motor, air cooled copper condenser with all accessories varied speed and dual rotary compressor, including fixing the out door units with mounting bracket , made Up of heavy duty GI steel, wall mounted type, Powder coatedincl nuts & bolt etcas per manufacture recomendation and fixing of room unit on wall , providing and making interconnection , including refregerent piping with nitryle rubber insulation and control cable from indoor to out door, first charging of refrigerent gas including cordless remote complete all as specified and directed. |
| 132 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 2 core complete all as specified and directed. |
| 133 | Sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying & stretching the cable in trenches, including hand punning and consolidating, complete all as specified and directed. |
| 134 | M & L for Bricks, old size sub class `B\" laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed. |
| 135 | S & F 40mm GI pipe light grade for protection of HT/LTXLPE cables in trenches/ Open in air/ Culvert / Drain/Road crossing etc including necessary road cutting and making good with PCC (1:2:4), Type B-1, (using 20mm graded stone aggregate), 100mm thick or fixing on wall / poles of any type, secured with clamps, complete all as specified and directed. |
| 136 | M & L for High density polyethylene pipes (HDPE) 32 mm of pressure rating 6 kgf/cm2 laid in trenches or fixed on wall/floor for protection of UG cable complete all as specified and directed. |
| 137 | M & L for Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground for lightening conductor complete all specified and directed. |
| 138 | M & L for Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed. |
| 139 | M & L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed. |
| 140 | M & L installation, testing & commissioningof maintenance free ULapproved copper bonded earth rod of 10 feet length (set of three), each 17.2 mm dia, made of high tensile low carbon steel rod, molecularly bonded with 99.9% electrolytic grade copper on outer surface (minimum copper bonding thickness - 250 microns) with exothermally jointed copper busbar of 50mm x 6mm x 200mm for connection. The rod and exothermic joint together successfully tested at 25 KA fault current by CPRI with 50 Kg Eco-friendly earth enhancing compound with each earth rod. The earth pitcover madeof heavy duty poly plastic of high grade polypropylenewith top dia not less than 250mm, bottom dia not less than 330mm and height not less than 260mm for each electrode pit. The compound should comply to IEC:62561-7 having passed leaching, corrossion, sulphur & resistivity test as per IEC: 62561-7 by NABL accredited Lab with FRP earth pit cover of top size lockable Lid. It includes GI Protection pipe light grade 40 mm bore with Copperstrip of size 20mm x 3mm upto test point complete all as specified & directed. Make : OBO bettermen / Ennov /JMV or equivalent Notes: (i) Taking out/dismantling of existing earthing (each set) included in quoted rates and materials so retreived shall be credited to contractor.(ii) Copper Strip 20mm x 3mm connecting among tripod of earthing & tripod to test point included in quoted rates. (iii) Cost of Earthwork and neccessary PCC work for earthing pit is included in the above item. (iv) The test result of each set of earthing should be less than 1 Ohm. Payment shall be made only after getting satisfactory result. (v) Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engineer-in- charge. (vi)RateofEarth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre in 02 canes (5 Ltr per cane)for each pit deemed to be included in the quoted rate.(vii) The connection clamp shall be permanentlly welded to the copper boundedrodto avoid any kind of connectivity loss, the pre-welded copper bounded rod shall not need any additional clamp for termination.(viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab.(ix) Earth work such as auguring andmaking good the surrounding area shall be carried out in any type of soil. (x) Earthing shall be tested after completion of work by the contractor in presence of Engineer-in-charge, user and proper record shall be maintened duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing shall be redone at no extra cost to Govt. till desired result is obtained. (xi) The quoted rate deemed to be included for all above aspects. |
