|
| 1 | Excavating in post holes( or similar holes ) each n. exc 0.5 cumin any type ofsoil getting out, returning filling in and ramming around in layers not exceeding 25 cmcomplete all as specified and as directed. |
| 2 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in any type of soil, complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil, complete all as specified and as directed. |
| 4 | Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. |
| 5 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each and removing to store complete all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)exc 1.5 sqm but n.exc 4 sqm each and removing complete all as specified and as directed. |
| 7 | Taking down cement plaster of any descreption on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. |
| 9 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 10 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 11 | Demolition of brick/stone masonry built in CM. complete all as specified and as directed. |
| 12 | M&L brick work with sub class B bricks, straight or curved on planexc 6 m mean radium built in CM 1:6 all as specified and as directed. |
| 13 | M&L 75 mm thickPCC 1:3:6 type C2 using 40 mm graded aggregate as in sub base complete all as specified and as directed. |
| 14 | M&L PCC1:2:4 using B1 (20mm graded aggregate) for coping, corner of roof and similar work complete all as sepcified and directed. |
| 15 | M & L for PCC 1:2:4 Type B-1 using 20 mm graded aggregate in surface channels and drains complete all as specified and as directed. |
| 16 | M&L for cement concrete type B1 1:2:4 (using 20 mm gradded aggregate) use incoping, gola, hold fast and similar workincluding naccesary form work complete all as specified and directed. |
| 17 | M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 18 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all as directed |
| 19 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all as directed |
| 20 | M & L for rendering 5mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces as on ceiling complete all as specified and as directed. |
| 21 | M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all as directed |
| 22 | M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 23 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x600x7mm thick laid over 10 mm thick rendering/backig coatin CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 24 | M & L for digital glossy finished double charged Vitrifiedtiles light Shade 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 25 | M & L for digital glossy finished double charged Vitrifiedtiles light Shade 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 26 | M & L for double charged glossy finished Vitrifiedtiles of size 600mmx1200mm or as approved by Engr in Charge dark shade 8-10mm thick (square/rectangular) polished, area of each tilesexc 0.42sqm but not exc 1.0 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 27 | M & L for double charged glossy finished Vitrifiedtiles of size 600mmx1200mm or as approved by Engr in Charge dark shade 8-10mm thick (square/rectangular) polished, area of each tilesexc 0.42sqm but not exc 1.0 Sqm, in vertical surfaces of skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 28 | M&L for Dura stone heavy duty vitrified tiles of size n exc 0.36 Sqm of 8-10mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface complete all as specified and as directed. |
| 29 | Granite stone 18-20mm thick (table rubbed and polished) inwindow cills, cooking platformsand the like not less than 1 Sqm (in one piece), laid over15mm thick layer of cementmortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 30 | 10-12 mm thick gypsum boards seamless false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed by Engr-in-Charge.Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer |
| 31 | M&L for 15mm thick screed bed in cement mortar 1:4 and applying one coat of neat cement slurry @ 3.00 kg/Sqm and applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaceswith min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame)complete all as specified and directed. |
| 32 | S&F solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick woodgrain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed. |
| 33 | Providing and fixing factory made uPVC white/coloured casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Door/Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleek with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 34 | Providing and fixing factory made uPVC white/coloured Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 35 | S&F Anodised aluminium window and ventilator shutters with chowkat, sliding three track/side hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleat , glazing clips, rubber packing, frosted glass 4mm thick, Stainless steel wire mess, anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150mm long (1 no)hinges type B-12 100mm long (2 no ) suitable handle (1 no)etc complete all as specified and as directed. |
| 36 | M & L for 5mm glass (one side view or colour as approved by Engr in Charge) as in windows, hinged doors, partitions, automatic doors/windows and similar work including cutting to shape, drilling holes required and connected accessories complete all as specified and as directed |
| 37 | S&F 125 x 60mm pressed steel frames for doors with one or more rebate includingnecessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified and as directed. |
| 38 | S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type complete all as specified and as directed. |
| 39 | M&L for factory made 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut andmitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 40 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube suppling and fixing in opening as per specification & drawing complete all as specified and as directed. |
| 41 | S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 42 | S&F stainless steel butt hinges mediumweight 100 mm long complete all as specified and as directed. |
| 43 | S & F 200 mm longbrass barrel tower bolt of extruded section complete all as specified and as directed. |
| 44 | S&F 150 mm lengthbrass handles cast type polished bright complete all as specified and as directed. |
| 45 | S & F 300 mm long mild steel sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed. |
| 46 | S&F stainless steelwire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and as directed. |
| 47 | Venetian blinds of approved make, Horizontal or vertical or type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. |
| 48 | M&L for Almirah/Cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet all reqrired brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edbes shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawingwith locking arragement approved by Engr-in-Charge. Colour as approved by GE. (Make: Rajshree/Sintex or equilent) complete all as specified and as directed. |
| 49 | S&FPVC steel catcherof superior quality all as specified and directed by Engr in charge/GE |
| 50 | S & F Hetich softcloser hinges of stainless steel premium quality complete all as specified and as directed. |
| 51 | Fancy type Brass handles 100mm size fixed with screws, complete all as specified and as directed. |
| 52 | S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectro galvanised complete all as specified and as directed. |
| 53 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 54 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 55 | S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, eves board and similar work to wall fixed with self tapping screws complete all as specified and as directed. |
| 56 | M&L for rolled section as in main and cross beams , purlins , rafters ,posts where connected to common rafter and running rails,frame work of eves board, tank staging work etc conforming to Fe- 410-W complete all as specified and as directed. |
| 57 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all as specified and as directed. |
| 58 | S&F in repair counter top vitreous chinawarewash hand basin (WHB) whitesize 550mm x 400mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete. Make : Jaquar Make :KUS-WHT-35601 or its equivalent in Hindware/Cera/Parryware |
| 59 | S&F 5 mm thick looking mirrorof required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glasscomplete all as directed. |
| 60 | S&F in repair Water closet single piecepattern coloured of size 370x695x795 mm as approved and complete all as specified and directed by Engr-in-Charge . Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera/Parryware |
| 61 | S&F Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipecomplete all as specified and as directed. |
| 62 | S&F Concussive push button taps of cast copper alloy, screwed for iron pipe and fixedcomplete all as specified and as directed. |
| 63 | S&F urinal spreader of CP for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and as directed. |
| 64 | S & F 15mm bore stop valve/angle cock, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 65 | S & F inrepair 15 mm dia WHB mixerchromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed.Make - Jaquar Cat No KUP-35011BPMor equivalent in Hindware/Cera/Parryware |
| 66 | S&F in repair 15 mm bore CP Bib tap facncy type complete all as specified and directed. Make : Jaquar Cat Part No CON 107KN and equvalent in CERA/Parryware. |
| 67 | S&Fin repair 15 mm diaAngle valves/ stop cock ,fancy type and chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera/Parryware |
| 68 | S&F in repair Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and directed. Make : Jaquar/CERA/Parryware. |
| 69 | S&F in repair chromium plated toilet paper holder complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA/Parryware. |
| 70 | S&F in repair 600 mm long brass chromium plated towel rail fancy type complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA/Parryware. |
| 71 | S&F in repair soap dish complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA/Parryware. |
| 72 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 73 | S&F PVC connection 15 mm dia and 600mm long with two Nosof brass check nuts and washers complete all as specified and as directed. |
| 74 | S & F 15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed. |
| 75 | S & F 20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed. |
| 76 | S&F Sinks with draining board/double bowl made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastesincluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. |
| 77 | Supply only Stainless steel basket (plain), SS plate basket(11-13 division), SS partition basket, SS Cutlery basket,SS grid basket of size as per manufacturer/ as directed by Engr in Charge made of 4mm the S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18\"/20\" length two wayextruded MS galvanised over rollers of approved make. Make: Life style Cat part No WA/POB/15204 or equivalent approved |
| 78 | M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and PTMT ball valve 20mm dia including taking down of old tankand removing from sitecomplete all as specified and as directed. |
| 79 | S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both endsfor iron pipe of size 20mm bore complete all as specified and as directed. |
| 80 | S&F110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 81 | S&F 110 mm PVC (SWR) bends any redius with access door complete all as specified and as directed. |
| 82 | S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door complete all as specified and ;as directed |
| 83 | S&F PVC (SWR) Floortrap, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good all as directed |
| 84 | M & L for applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubed with emery paper and make surface good and clean complete all as specified and directed. |
| 85 | Preparing of newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed. |
| 86 | M&L for preparation of newly plastered surfaces on wall/roof projection including facia, cornices etc and applying exterior water proof wall care putty @ 1 Kg (undiluted) per sqm of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces, on e or more coats and grinding the puttied surface with mechanical grinder for make the surface even and smooth for receiving primer and applying two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives & colour stay technology, excellent primer applied @0.9 litre (undiluted)/10 Sqm diluted with water as per manufacture instructions over and including priming coat of exterior primer applied @ 1.79 litre/10 Sqm diluted with water as per manufacturer instruction over and including priming coat of paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of opening single spray gun with a mix material hose length of 30 mtr the spray machine should be reputed. |
| 87 | Note :-The work for periodical services shall included the following and the rates quoted by the bidder shall included the same :(a)The work pertains to periodical services shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc approval by the GE.(b)The Contractor shall submit the documents under cover I \"Memorandum of Understanding\" (MOU) with at least one of the manufacturers mentioned in the contract.(c) Use of scaffolding, trestle, ladders, cradles etc necessary for execution of work and protective measures.(d)Removing of nails, making good holes, cracks etc.(e) Work in patches and in narrow/width, bands, cornices, pilasters etc and cutting in edge of line where necessary. |
| 88 | Note :-(f)Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floor, cleaning glass, joinery, electric fittings, wiring etc, drops and splashes of paint be cleaned to the ensure satisfaction of Engr in Charge.(h)Sample patch of 10 Sqm be repaired considering all the items of periodical and shall be got approved from GE prior to carrying out further work.(j) The work shall be carried out op to 4 storey.(k) Incl removal of vegetation on walls incl roots on wall surfaces. |
| 89 | M&L for two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified and as directed. |
| 90 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 91 | M & L for preparation of new plaster surfaces of walls/ceiling and applying two coats of oil emulsion distemper (white/tinted)all as specified and as directed. |
| 92 | M&L hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembeddinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc complete all as specified and as directed. |
| 93 | S&F rolled mild steel Fe-410w (Gde-E-250) quality \"B\" Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and as directed. |
| 94 | M&L for preparation of new steel surfaces of any discripton not otherwise discribed over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces . |
| 95 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete includingfitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materialsfor taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed. |
| 96 | Point wiring for one light/ fan/bell point controlled by oneswitch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly includingcutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed . Make: Havells/ Finolex/ Polycab. |
| 97 | All as per item no 94 above but cable 2.5 sqmm FRLSHfor one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 98 | All as per item no 94 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 99 | All as per item no 94 above but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 sqmm. |
| 100 | All as per item no 94 above but an independent board with cables of size 4.0sqmm. |
| 101 | S&F for modular switch 6 Amps single pole one way230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 102 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 103 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T |
| 104 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T |
| 105 | S&F in replacement ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed. |
| 106 | S&F in replacement electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make: Havells Crabtree/ Legrand/ Indoasian. |
| 107 | S&Finreplacement Sheet metal enclosure double door type for MCCB VTPNDB upto 4 wayvertical type 415 volts with suitablebusbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification incl 100 Amp 4 Pole 16 ka MCCB complete all as specified and directed.Make: Schneider/ Legrand/Havells |
| 108 | S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 109 | Supply and fixing in replacement 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 110 | S&F in replacement MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to \"C\" Curve complete all as specified and directed. |
| 111 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make-Havells LED Pride Plus Neo Batten 10 W Cat Part No LHEXACP7IN1W010 or Equivalent make in Bajaj/C&S |
| 112 | S & F in repair LED light fitting 1x9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make- Wipro / Bajaj /Philips |
| 113 | S& F in replacement LED tube light fittings of 20 wattage aluminium extruded body including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed. |
| 114 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 2.5 Sqmm nominal cross sectional area and one run of 2.5 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia \"medium grade\" PVC concealed conduits and fittings, complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 115 | Supply and fixing LED luminaire 10 watt, 220 V AC recess/surface mounted downlighter type with high efficiency PC diffuser soft lightand symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.Make-Havells/ Philips/C&S. |
| 116 | S & Fin repairs LED paneldecorative down light fitting/recess mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified. |
| 117 | S&F of decorative wall mounting 1X9Wfixture with frosted glass along with 9W warm white bulb GLS lamp luminaire complete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F in repair two pin and earth plug and socket with 1 modular MCB single pole 20 to 32amps \"C\" series 10KA inmetal enclosure and connecting complete all as specified and directed. |
| 119 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) |
| 120 | S & F Exhaust fanmade of sturdy Engineering plastic bodycompletevoltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mmwith louver shutters all as direceted by Engr-in-charge. Make:Havells/Bajaj/CG. |
| 121 | Supply and fix electric water heater, storage type plastic body with stailness steel inner tank Instant Geyser and heating element upto 3 KW capacity 5 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Make-V Guard Zio/Havells Carlo/Bajaj |
| 122 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 10 Sqmm nominal cross sectional area and one run of 10 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia \"medium grade\" PVC concealed conduits and fittings, complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 123 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia \"medium grade\" PVC concealed conduits/existing PVC Conduit and fittings,complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 124 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 2.5 Sqmm nominal cross sectional area and one run of 2.5 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia \"medium grade\" PVC concealed conduits and fittings, complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 125 | Earthing complete with galvanized steel earth plate electrodes 600 mm x600 mm x 6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia deformed barshandle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testingon completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost. |
| 126 | Supply , Laying, Testing and commissioning cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmmx 3.5 coresize all as specified. |
| 127 | S&F Double Walled corrugatedDWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in undergroundall as specified. |
| 128 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and includingprovisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles all as specified. |
