|
| 1 | Surface dressing n.exc 15 cm deep in any type of soil complete all as specifed and as directed. |
| 2 | Excavation in trenches n.exc 1.5M wide and n.exc 1.5M in depth for foundation complete all as specifed and as directed. |
| 3 | M&L Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specifed and as directed. |
| 4 | M&L Removing excavated mtrl n exc. 50 m and depositing wheredirectedat a level not exc 1.5 m above the starting point complete all as specifed and as directed. |
| 5 | Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)not exc 1.5 sqmeach and removing complete all as specifed and as directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)exc 1.5 sqm but n.exc 4 sqm each and removing complete all as specifed and as directed. |
| 8 | Taking down cement plaster of any description on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and directed. |
| 9 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. |
| 10 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specifed and as directed. |
| 11 | Dismantling structural steel work including doors, gates including framed truss etc. complete all as specifed and as directed. |
| 12 | Dismantling wall & ceiling boards of any description and thickness including cover fillets, complete all as specified and directed. |
| 13 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specifed and as directed. |
| 14 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specifed and as directed. |
| 15 | M&L Brick work with sub class \"B\" brick, straight or curved on plan exc 6M Mean radius built in type CM 1:6 complete all as specifed and as directed. |
| 16 | M & L for brick work with sub class \"B\" bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed. |
| 17 | M&L for hardcore ofbroken stone of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfaces complete all as specifiedand as directed. |
| 18 | M&L for anti-termite treatment of bottom and sides of excavation at the rate of 5 ltr of emulsion per square metre of surface area all as specified and directec by Engr-in-charge. |
| 19 | Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 20 | M&L for anti-termite treatment of the top surface of filled earth at the rate of 5 ltr of emulsion per square metre of surface all as specified and directec by Engr-in-charge. |
| 21 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 22 | Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 23 | M&L Damp proofing course to horizantal or vertical surface including form work in PCC 1:2:4 type B1 25mm thick complete all as specifed and as directed. |
| 24 | M&L PCC 1:4:8 type C2 (using 40 mm graded agg) in foundation filling and mass concrete complete all as specifed and as directed. |
| 25 | M&L for 75mm thick PCC 1:4:8, type D-2by using 40 mm graded stone aggregate as in sub base floorcomplete all as specifed and as directed. |
| 26 | M&L 75 mm thickfor PCC 1:3:6 using 20 mm graded aggregate as in plinth protection using extra cement complete all as specifed and as directed. |
| 27 | M&L for 75mm thick Plain cement concrete type B-2, 1:3:6 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete,all as specified and as directed. |
| 28 | M&L for cement concrete type B1 1:2:4 (using 20 mm graded aggregate) use incoping, hold fast and similar workincluding necessary form work complete all as specified and directed. |
| 29 | M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed. |
| 30 | M&L PCC 1:2:4type B0 (12.5mm graded aggregate) as incoping, benching and similar work etc including necessary form work complete all as spcified and directed. |
| 31 | M&L for 75mm thick PCC 1:3:6, type C-2by using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed. |
| 32 | Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span all as specifiedand directed. |
| 33 | Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 34 | Reinforced cement concrete M-25 (20mm graded aggregates) design mix columns, pillars, piers,posts and struts complete all as specified and directed. |
| 35 | Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specifiedand directed. |
| 36 | Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specifiedand directed. |
| 37 | Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in chajjas complete all as directed |
| 38 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4). (Note:- reinforcement will be measured and paid seperately.) |
| 39 | M&l for screed bed in cement mortar 1:6 complete all as specified and as directed |
| 40 | M&L for coloured chequered cement concrete tiles 30cmx30cmx2.5cm, machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over 15 mm thick screed be in CM 1:6 complete all as specifed and as directed. |
| 41 | S&F Vitrified Dura stone pathway tiles of size not exc 0.36 Sqm of 15mm thick as in floors and over including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed |
| 42 | M&L for vitrified tiles (double charge glossy finish), area of each tile exc 0.42sqm but not exc 1.00 Sqm, 8-10mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 43 | M&L for vitrified (double charge glossy finish), area of each tile exc 0.42sqm but not exc 1.00 Sqm, 8-10mm thick (square or rectangular) as in skirting/dado of wall surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 10mm thick renderingin CM 1:4 complete all as specified and directed. |
| 44 | M & L for glazed coloured ceramic tilesin vertical surface300x600x7mm thick or 600x1200x7mm thick laid over 10 mm thick rendering/backing coatin CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specifed and as directed. |
| 45 | M&L for Non skid ceramic coloured tiles 400x400x7 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over a15 mm thick screed bed in CM 1:6 all as specifed and as directed. |
| 46 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm or 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specifed and as directed. |
| 47 | M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed. |
| 48 | M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 15mm thick screed bed in CM 1:4 complete all as specifiedand as directed. |
| 49 | M&L for machine cut kota stone 20-25 mm thick in skirting, dado and pillar laid over cement screed andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifiedand as directed. |
| 50 | S&F 10-12 mm thick gypsum boards seamless false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed.Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer |
| 51 | M&L for sand cushion 20 to 30 mm thick for laying and fixing interlocking tiles. |
| 52 | M&L machine pressed precast concrete interlocking paver block (glossy finish) any shape and size (sample approved by GE) confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 53 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all as directed |
| 54 | M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement complete all as specified and as directed. |
| 55 | M&L for 10mm thick on fair faces of brick /concrete surfacesin cement mortar 1:6 and finishedeven and smooth without using extra cement complete all as specifed and as directed. |
| 56 | M&L for 10 mm thick rendering in CM 1:3on roof sufaces, finished even and smooth without using extra cement all as specifiedand as directed.. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item. |
| 57 | M&L for rendering 5 mm thick in CM 1:3 on ceiling and exposed surface of concrete finsihed even and smooth without using extra cement complete all as specifed and as directed. |
| 58 | M&L forpreparation of new plaster surfaces applying two coats of cement base paint and over one coat of primersall as specified and directed |
| 59 | M&L forpreparation of new plaster surfaces applying threecoats ofwhite wash on ceiling complete all as specifed and as directed. |
| 60 | M&L for form workto soffits of suspended slabs and similar work not exceeding 200mm thick complete all as specifed and as directed. |
| 61 | Use & waste of formwork to sides/bottom of the plinth beam & column footings complete all as specifed and as directed. |
| 62 | Use & waste of formwork to sides of the column complete all as specifed and as directed. |
| 63 | Use & waste of formwork to sides/bottom of the roof beam complete all as specifed and as directed. |
| 64 | Use & waste of formwork to sides/bottom of the roof slab complete all as specifed and as directed. |
| 65 | Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floorand roofs n exc20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. |
| 66 | Formwork to chullah hoods, chajjas,troughs and similar items including edges for rough flat finished surface of concrete, complete all as specifed and directed. |
| 67 | M&L for TMT Reinforcment 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and as directed. |
| 68 | M&L for TMT Reinforcment 5mm dia and over including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and as directed. |
| 69 | S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour sheet reinforced with MS square tube all as per specififcation and drawing and as directed by Engr-in-charge |
| 70 | S&F factory made solid PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom railsMS frame shall be coverred with heat moulding plain colour PVC C channels having a PVC sheets strips of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,laock rail & bottom rail on either side &as gap insert for top rail & bottom rail panelling of plain colour PVC sheets to Be fitted in the MS frame welded /sealed to the stiles & rails with suitable complete all as specifed and as directed. |
| 71 | S&F 100mm size butt hinges extruded aluminium alloy with galvanised with galvanised mild steel hinges pin anodisedtype B-22 complete all as specifed and as directed. |
| 72 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specifed and as directed. |
| 73 | S&F aluminium handles cast type of 150mm size complete all as specifed and as directed. |
| 74 | S&F steel Ventilators with top hung shutters including hinges steel peg stay, complete all as specified and directed . |
| 75 | S&F for sheet glass 4 mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in Each pane complete all as specifed and as directed. |
| 76 | S&F GI tubes 15 mm dia medium grade laid in trenches or fitted on walls complete all as specifed and as directed. |
| 77 | S&F GI tubes 20 mm dia medium grade laid in trenches or fitted on walls /floor complete all as specifed and as directed. |
| 78 | S&F 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches or in floor. |
| 79 | S&F 110 mm PVC (SWR) bends any redius with access door. |
| 80 | S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door. |
| 81 | S&F 110 mm PVC (SWR) vent cowl complete all as specifed and as directed. |
| 82 | PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement complete all as specifed and as directed. |
| 83 | S&FVitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe complete all as specifed and as directed. |
| 84 | S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specifed and as directed. |
| 85 | S&Fvitreous china white wash hand basin (flat back or angle back type) size 550x400mm white including brackets, pedestal, wast fittings brass chromium plated, CP waste cupling, 32mm dia, waste pipe, PVC connection 15 mm bore with PTMT nuts of length incl 15mm dia CP piller tap fancy type.complete all as specified and directed. |
| 86 | S&Fhealth faucetABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specifed and as directed. |
| 87 | S&F Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA/Parryware. |
| 88 | S&F CP Soap dish holder incl all fittings complete all as specifed and as directed. |
| 89 | S&F in repairs 5 mm thick looking mirrorof required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glasscomplete all as directed. |
| 90 | S&FLooking mirror of size 600x600mm with bevelled edges, fancy type, made ofselected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers , complete all as specified. Make: Modiguard or Crystal |
| 91 | M&L for vitreous china urinal half stall type white incl waste pipe complete all as specified and directed. |
| 92 | S&F concussive push button taps of cast copper alloy, screwed for iron pipe and fixedcomplete all as specified and as directed. |
| 93 | S&F CP waste coupling32mm dia PTMT (half or full threaded ) minm wt 450 gms complete all as specifed and as directed. |
| 94 | S&F 15mm bore centre hole basin mixerwith round spoutwith 450mm long copper pipes and brass nuts with out Pop up complete all as specifed and as directed. |
| 95 | S&F PVC connection 15 mm dia and 600mm long with two Nosof brass check nuts and washers complete all as specifed and as directed. |
| 96 | S&F CP Bib taps cast copper alloy with crutch or butterfly handle two bay, screwed for iron pipe of dia 15mm, fancy type fixed complete all as specifed and as directed. |
| 97 | S&FCPangle valves/stop valve cast copper alloy,fancy type,with iong shank and cup,bore15mm, fixed complete all as specifed and as directed. |
| 98 | S&F600 mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws complete all as specifed and as directed. |
| 99 | S & F rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylindrical veritcal with closed top ) with threaded cap hoisted and fixed in position all as specified and directed |
| 100 | S&F 20 mm dia gunmetal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specifed and as directed. |
| 101 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed for iron pipes complete all as specifed and as directed. |
| 102 | M&L for SWG drain pipe grade \"A\" of150 mm internal dia laid in trenches and jointedin cement mortar (1:1) complete all as specifed and as directed. |
| 103 | M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concretetype D2 (1:4:8) for 150mm dia pipe complete all as specifed and as directed. |
| 104 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 105 | Roughing surfaces of New /old conc surfaces by picking up , sweeping,cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm mixed with water proofing compound including 20mm thick screeding in CM (1:4) finished even andsmooth mixed with water proofing compound (WPC shall be measured and paid separatley) |
| 106 | M&L Applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forcedand bonded completely to the surfaceswith min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm including two coats ofbituminious alluminium paint all as specified and directed by Engr-in-Charge. |
| 107 | Supply only Liquid water proofing compound complete all as specifed and as directed. |
| 108 | M & L for applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubbed with emery paper and make surface good and clean complete all as specified and directed. |
| 109 | M&L for applying 3mm thick layer of wall putty on walls complete all as specifiedand as directed. |
| 110 | M&L two coats of oil bound distemperon walls including preparation on new surfaces over a coat of primercomplete all as specified and directed. |
| 111 | M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paintcomplete all as specifiedand as directed. |
| 112 | M&L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete, of frame size 105 x 60 mm complete all as specifed and as directed. |
| 113 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specifed and as directed. |
| 114 | S&F factory made, 2nd class hard wood (sal/hollock),plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick completeincluding fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specifiedand as directed. |
| 115 | S&F steel window (box type) factory made with side hung shutters including pintolhinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified.Note : i)The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 116 | Description all as per item as above here in before but without glazing bar complete all as specified.Note : i)The window shall be fabricated as perDrg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3ii) MS fillets, glazing, wire gauge shall be measured and paid separately |
| 117 | M&L for MS framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 quality A incl one shop coat of zinc chromate primer paint incl preparation of surfaces at contractor\"s workshop before fabrication complete all as specifiedand as directed. |
| 118 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specifiedand as directed. |
| 119 | S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete all as specifiedand as directed. |
| 120 | M&L for preparation of newly steeland iron surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specifiedand as directed. |
| 121 | M&L for preparation of woodensurfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimercomplete all as specifiedand as directed. |
| 122 | S&F mild steel sliding door bolt plate type250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specifiedand as directed. |
| 123 | S&F mild steel cold rolled butt hinges mediumweight 100 mm long complete all as specifiedand as directed. |
| 124 | S&F in repair curtain/Harrison rails of stainless steel 20/ 25mm dia with brackets, stops, end bulbs, rollers etc complete all as specified and directed. |
| 125 | M&L for Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3mm thick polymeric water proofing membrane, five layered, of weight not less than3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of semi hot blown bitumen 85/25 grade bitumen @ 0.70 Kg/Sqm and provide aluminium paint as per manufacturing instruction complete all as specifiedand as directed.Make: STP/IWLNote:- Water proofing treatment will be done by IWL or through a specialized agency. |
| 126 | M&L for75mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specifiedand as directed. |
| 127 | S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specifed and as directed. |
| 128 | S&F Pre-Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specifed and as directed. |
| 129 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.Make : Fenesta/Yashpoly/Veka.(Note: (a) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (b) No payment shall be made to the contractor without purchase vouchers directly from manufacturer\"s and warranty certificate from manufacture. |
| 130 | Providing and fixing factory made uPVC white/coloured Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Make : Fenesta/Yashpoly/Veka.(Note: (a) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (b) No payment shall be made to the contractor without purchase vouchers directly from manufacturer\"s and warranty certificate from manufacture. |
| 131 | M & L fortoughened glass 5mm thick of one side view (etching design as per direction of Engr in Charge), ordinary quality and glazing with beads fixed with metal panel pins, EPDM washers or connected accessories exc 0.5 sqm in each pane complete all as specified and as directed |
| 132 | S&F aluminium (extruded section body) door closed hydraulically regulated designation NO.3 universal type suitable for door shutter of 851 to 100mm in width and of weight between 61 to 80 kg complete all as specifed and as directed. |
| 133 | M&L for rolled section as in main and cross beams, purlins, rafters, posts where connected to common rafter and running rails, frame work of eves board, tank staging work etc conforming to Fe- 410-W complete all as specifed and as directed. |
| 134 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed. |
| 135 | S&F 4 mm dia galvanised steel wire 50 mm x 50 mm mesh made up in to mattresses or cages etc complete all as specifed and as directed. |
| 136 | M&Lfor applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 137 | M & L for preparation of new plaster surfaces of walls/ceiling and applying two coats of oil emulsion distemper (white/tinted) all as specifed and as directed. |
| 138 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete includingfitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materialsfor taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specifed and as directed. |
| 139 | Point wiring for one light/ fan/bell point controlled by oneswitch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement , medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making samethe wall patchs after layingthe wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. Make:Havells/polycab/Finolex |
| 140 | All as per item no 139 above but cable 2.5 sqmm FRLSHfor one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 141 | All as per item no 139 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 142 | All as per item no 139 above but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 sqmm. |
| 143 | All as per item no 139 above but an independent board with cables of size 4.0sqmm. |
| 144 | All as per Srl item No 139 but for 3/5 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. |
| 145 | S&F in repair electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make: Havells Crabtree/ Legrand |
| 146 | S&F for modular switch 6 Amps single pole one way230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira |
| 147 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira |
| 148 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira |
| 149 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira |
| 150 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge.Make: Havells/ Anchor/ Indoasian |
| 151 | S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator ofcomplete all as specified and directed. Make:- Havells/ legrand/ Indo Asian. |
| 152 | Supply and fixing LED lights fitting 1x 22W, 230V,AC decorative box typewarm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. Make - Havells/ Wipro/Syska |
| 153 | S & F in repairs LED paneldecorative down light fitting/recess mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED including connecting up with flexible copper conductor cable of suitable size complete all as specifed and as directed. |
| 154 | Supply and fixing Square/Round shape 18 watt 220 volts AC recess/surface mountedtypewarm white colour with high efficiencysoft lightand symmentrical illumination complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and directed by Engineer-in-Charge. |
| 155 | S & F in repair LED light fitting 1x9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make- Wipro / Bajaj /Philips |
| 156 | Supply and fixing in repair LED building security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitablebracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make- Philips/Bajaj/Syska |
| 157 | S&F Sheet metal enclosure MCB distribution boardsingle pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link,fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.(Note-MCBs will be measured separately) Make:- Havells/ legrand/ Indo Asian. |
| 158 | S & F in MCBsingle pole 240 volt any rating from 10 to 40 amps \"C\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Indo Asian. |
| 159 | S & F inMCBsingle poleand neutral 240 volt any rating from 63 Amps \"C\"series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Indo Asian. |
| 160 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X1.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable1.5 Sq mm as earth lead complete all as specifed and as directed. |
| 161 | S&F Sub main wiring with two single core PVC insulated with FRLSH copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make:Havells/polycab/Finolex |
| 162 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable10 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make:Havells/polycab/Finolex |
| 163 | S & F Exhaust fanmade of sturdy Engineering plastic bodycompletevoltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm / 300mmwith louver shutters all as direceted by Engr-in-charge. Make:Havells/Bajaj/CG. |
| 164 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed |
| 165 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia deformed barshandle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testingon completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost. |
| 166 | Supply and fixing LED lights fitting 1x 20W,230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make- Syska/Philips/Havells/Bajaj |
| 167 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitablebracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make- Syska/Philips/Havells/Bajaj |
| 168 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and includingprovisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed. |
| 169 | S & Fin replacement MCBsingle pole 240 volt any rating from 6 to 32 amps \"C\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed. Make:- L&T / C&S/ CG/ Schenider/ Legrand. |
| 170 | S & Fin replacement MCBsingle pole 240 volt any rating upto 32 amps \"C\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed. Make:- L&T / C&S/ CG/ Schenider/ Legrand. |
| 171 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit/casing capping25mm dia including PVC insulated copper conductor cable2.5 Sq mm as earth lead all as specified. Including taking down old sub main wire. Make: Havells / Finolex / Polycab. |
| 172 | S & Fin repairs LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with two core flexible copper conductor cable of suitablesize. Make: Philips/ Syska/ Havells/ Bajaj |
| 173 | S&F Double Walled corrugatedDWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in undergroundall as specifed and as directed. |
| 174 | Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminum conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 sqmm x 2 core sixe all as specified including taking down old cable.Note: Earth work and other connected work shall be measured & paid saperatly. Make: Havells / Finolex / Polycab. |
| 175 | S & FLED light fitting mirror type with high out put diffuser 2 feet, 10 wattt 220 V AC decorative type with driver holder and LED lemp including connectingup with two core flexible copper conductor cable of suitablesize. Make: Philips/ Syska/ Havells/ Bajaj |
