|
| 1 | Surface excavation, n. exc 30 CM deep and average 15 cm, getting out in soft/loose soil complete all specified and directed.. |
| 2 | Excavation in trenches nexc 1.5m wide and nexc 1.5m in depth as in foundation etc as in any type of soil complete all specified and directed. |
| 3 | M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete all specified and directed. |
| 4 | Returning filling in including spreading levelling watering and well ramming in layers nexc 25cm as in soil complete all specified and directed. |
| 5 | Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point with soil complete all specified and directed. |
| 6 | M&L RCC M-25(20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc complete all specified and directed. |
| 7 | M&L RCC M-25(20 mm graded stone aggregate) as in column complete all specified and directed. |
| 8 | M&L RCC M-25(20 mm graded stone aggregate) as in roof beams, chajja lintle etc. complete all specified and directed. |
| 9 | M&L RCC M-25 (20 mm graded stone aggregate) as in slabs suppoorted on walls,beams and column in floors, roof, landings, balconies, canopies, deck slab and in shevels the like.complete all specified and directed. |
| 10 | M&L Formwork to side of concrete foundation footing base of column raft beam and plinth beam with required gap filler etc complete all specified and directed. |
| 11 | M & L form work to side/bottom of pillars , post , column, beam, slab square , rectangular or polygonalrequired gap filler etc complete all specified and directed. |
| 12 | M& L form work to sofits of suspended slabs such as roof slabs,floors slabs,landings/chajjaand similar work not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concreterequired gap filler complete all specified and directed. |
| 13 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, oncrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar workfor fair and smooth surface exc 10cm but n exc 20cm wide complete all specified and directed. |
| 14 | M&L mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all specified and directed. |
| 15 | M&Lmild steel bars 5 mm dia and over up to 10 mm dia in stirrups space and binders.(TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel complete all specified and directed. |
| 16 | M&L hardcore of gauge exc.63 mm but not exc 100 mm deposited , spread and levelled in layers n exc. 15 CM thick, watered and rolled/rammed to a true surface complete all specified and directed. |
| 17 | M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all specified and directed. |
| 18 | M&L Brick work with sub class \"B\" old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 19 | M&L 20 mm Rendering / beraring plaster with CM (1:4) over brick/concrete surface fair & even surfacecomplete.all specified and directed. |
| 20 | M&L12 mm Rendering with CM (1:6) over brick/concrete surface other than surface fair & even surfacecomplete.all specified and directed.. |
| 21 | M&L15mm Renderingincl WPCwith CM (1:4) over brick/concrete surface fair & even surface and complete all specified and directed. Note :- WPC shall be measured Sparely. |
| 22 | S&F Factory made single extruded WPC (wood polymer composite) solid door/window/ cesetory windows & other frames / chowkhat of decorative type/wood grain printed colour of size 50x100 mm comprising of virign PVC polymer of K value 58-60 (suspension grade) calciamCalcium carborate and naturan fibers (wood powder/ rice husk/ wheat husk ) and non toxic additives (maximum toxity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwd with full body threated star headed SS screw having minimum frame dencity of 750 kg/ cum. Srew withdrowl strenghth of 2200 N (Face) & 1100 N (Edge). minimum comp ressive strenth of proof. water/modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer froff water /moister proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasterners of required dia and lenth complete.all specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 23 | Ditto- all as peritem No. 107, above, bull size 50 x 125 mmcomplete.all specified and directed. |
| 24 | S&F factory made single extruted WPC ( wood polymer composite ) solid decorative type/wood grain printed color flush door shutter of size 35 mm thick comprising of virson polymer of k value 58-60 (Suspension Grade ) calcium carbonate and natural fibers (wood powder/rice husk /wheat husk and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum dencity of 650 kg/cum and screw withdrowl srength of 1800 N (face) & 900 N (Edge). mimimum compressive strength 50 N/mm2, modulud of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof. water/molstrureproof and fire retardent. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including S & with stainless steen butt hinges of required size with neccesory full body treaded star headed counter sunk S>S screw complete.all specified and directed. |
| 25 | S & F for factory made wire gauged PVC door shutter 30mm thick ( style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be coverd with heat moulded decorative type/wood grain printed colour PVC \"C\" channel having a PVC sheet strip of20mm width stuck inside with sottom rail on olevent cement for stiles and wood grain printed a PVC sheet for top rail. lock rail & bottom rail on eighter side & as gap insertfor top rail & bottomrail. wire gauzed i. e panel will be of wire gauze in lieu of wood grain printed Pvc sheet PVC panel the wire gauze shall be wrapped on an additional square 8 mm M.S solid tube and this shall be welded to M. S tubes, The wire guaze shall be strectched to tighten firmly of wood grain printed colour PVC sheet to be fitte in the M.S frame welded/ sealded to the stiles & rails with suatable 5mm thick x 15mm wide PVC sheet beading used stiles and rails and decorated PVC beading of 10mm x 10mm (9000)used insted of exposed portion of PVC sheet beading and joined togather with solvent cement, suppling & fixing in the frame at site complete.all specified and directed. |
| 26 | Supply & fixing solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes complete all as specified & directed. |
| 27 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet decoratedon the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 28 | S&F Eco-400 windows fabricated from roll formed sections of galvanized steel colour coated/powder coated (base steel as per IS 513\"D\" quality galvnized as per IS 277 with fine of 120 Gms / Sqm ) with total coated thickness of 0.60 mm sections should be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyster powder up to 50-60 microns, thick section for frame should be of 72mmx50mm,section for mullion should be 72x50 mm, section for shutter frame should be of 47x20mm, section for fixed glass bead should be of 12mmx12mm, and section for fly mesh should of 40x20 mm, each glazed shutter and mesh shuttershould be provided with SS pivot hinges -1 set sec color handle and stay, each glazed shutter and fixed glass portions should be provided with a glass of 5 mm plain float glass mesh shutter should be provided with stainless steel 32 mm guage fly mesh of 304 grade with 144 holes / sqm in window should be provided with grill made of 10 mm Sqr MS Bars welded to at 150mm centre to centre 6mmx12mm Ms flat. total grill unit should be powder coted and fixed to window frame with screws. |
| 29 | S&F Eco-400 ventilators fabricated from roll formed sections of galvanized steel colour coated/powder coated (base steel as per IS 513\"D\" quality galvnized as per IS 277 with fine of 120 Gms / Sqm ) with total coated thickness of 0.60 mm sections should be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyster powder up to 50-60 microns, thick section for frame should be of 72mmx50mm,section for mullion should be 72x50 mm, section for shutter frame should be of 47x20mm, section for fixed glass bead should be of 12mmx12mm, and section for fly mesh should of 40x20 mm, each glazed shutter and mesh shuttershould be provided with SS pivot hinges -1 set sec color handle and stay, each glazed shutter and fixed glass portions should be provided with a glass of 5 mm plain float glass mesh shutter should be provided with stainless steel 32 mm guage fly mesh of 304 grade with 144 holes / sqm in window should be provided with grill made of 10 mm Sqr MS Bars welded to at 150mm centre to centre 6mmx12mm Ms flat. total grill unit should be powder coted and fixed to ventilators frame with screws. |
| 30 | S&F mild steel work for hold fast and similar small articles conforming to Fe 410-0 or Fe 310-0 including MS screws, bolts, including tarring with a coat of tar and sanding complete all as specified and directed. |
| 31 | M&L for providing, PCC 1:3:6 type C-1 (using 20mm graded aggregate) for embedding hold fasts including necessary form work etc.complete all as specified and directed. |
| 32 | S&F MS butt hinges of midium weight cold rolled 100mm size complete.all specified and directed. |
| 33 | S&F Allu butt hinges of 100mm size typeC-22 complete.all specified and directed. |
| 34 | S&F Aluminium anodised barrel tower bolt of 200 mmof extruded section complete.all specified and directed. |
| 35 | S&F 250mm long aluminium alloy.anodised, sliding door bolt with hasp,staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete.all specified and directed.. |
| 36 | S&Faluminium, anodised handlecast typeof size125 mm complete.all specified and directed. |
| 37 | S&F MS300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.all specified and directed. |
| 38 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6.complete all as specified and directed. |
| 39 | M&L for Coloured Glazed ceramic tiles 450X 300X 7mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed. |
| 40 | M&L for Machine cut kota stone slab flooring 20-25mm thick incl and over cement screed bed 20 mm thick in 1:6 cement and sand mortrar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 41 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and incl 10 mm thickcement screed bed 1:4 cement and sand mortrar, all as specified and directed. |
| 42 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base of floor etc complete.all specified and directed. |
| 43 | M&L for 25mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in sub base of floor etc complete.all specified and directed. |
| 44 | M&L 75mm thick PCC (1:3:6) type C1 using 20mm graded stone agg as in plinth protection/Path/pavingsurface even and smoothand and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified and directed. |
| 45 | M & L Two coats of cement base paint over coat of primer over new plasatered wall surfaces complete all specified and directed. |
| 46 | M&L for preparing new plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying two coats of oil bound distamper over ver a coat of average 2mm thick Birlaputty,complete all as specified and directed. |
| 47 | M&L Three coat of white wash over newly plasterdon ceiling surfacess incl preparation complete.all specified and directed. |
| 48 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20 mm outer dia on walls/ceiling or laying in floors complete all as specified. |
| 49 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 25 mm outer dia on walls/ceiling or laying in floors complete all as specified. |
| 50 | S&F Brass elbow for 20 mm outer Dia CPVC Pipe complete.all specified and directed. |
| 51 | S&F Brass Tee for 20 mm outer Dia CPVC Pipe. |
| 52 | S&F 20 mm outer Dia Male Brass Threaded Adaptor (MTA/ MBTA) . |
| 53 | S&F 20 mm outer Dia Union. |
| 54 | S&F Brass elbow for 25 mm outer Dia CPVC Pipe. |
| 55 | S&F Brass Tee for 25 mm outer Dia CPVC Pipe. |
| 56 | S&F 25 mm outer Dia Male Brass Threaded Adaptor (MTA/ MBTA) |
| 57 | S&F 25 mm outer Dia tank Adaptor |
| 58 | S&F 25 mm outer Dia Union |
| 59 | S&F 25 mm outer Dia Ball valve |
| 60 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth all as specified and directed |
| 61 | S&FPVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres. All as specified and directed. |
| 62 | S&F15mm,CP angle cockfancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete.all specified and directed. |
| 63 | S&F15mm ,bib tap , fancy type chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete.all specified and directed. |
| 64 | S & FGrating doom 100mm dia of PTMT (Minimum weight 25gms) fixed with cement. |
| 65 | S&F Soap dish of PVC fixed with pvc rawal plugs and screw complete.all specified and directed. |
| 66 | S &F Tublar towel rail 20mm dia D type 60 cm long between flange Brass CP complete.all specified and directed. |
| 67 | S & F 1000 ltrrotational moulded polyethylene water storage tanks (cylindrical vetical with threaded closed top) hoisted and fixed in position all as specified in SSR Part - I. |
| 68 | S&Fball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of loose 20 mm (minimum weight 210 grams) complete.all specified and directed. |
| 69 | S&Fwater closetincluding provision of cement concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with integral foot rest etc.excluding flushing cistern complete.all specified and directed. |
| 70 | S&F Vitreous China wash hand basin Counter type,CP waste cupling and32 mm pvc flexible waste pipe 800mm long etc complete all as specified and directed . |
| 71 | M&L for 20mm thick granite stone slab (of any type) as in floor or skirting, over 20 mm thick screed bed in CM 1:4,machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 72 | S&F 15mm dia PVC connection with PTMT nuts of length 450 mm. |
| 73 | S&F in repairs, 5 to 6 mm thick bevelled edge looking mirror of required size & shape of best quality with 50 X 20 mm teak wood polished beading with 6 mm thick ply/AC/PVC board beading fixed with C.P screw etc complete all as specified and directed. |
| 74 | S&F PVC (SWR) Pipe of 110mm dia any length and joint as specified complete. |
| 75 | S&F PVC (SWR) Pipe of 75mm dia any length and joint as specified complete. |
| 76 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 77 | S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all specified and directed. |
| 78 | S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all specified and directed. |
| 79 | S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all specified and directed. |
| 80 | S&F 110mm dia PVC(SWR) vent cowl complete all specified and directed. |
| 81 | M & L75 mm dia of out letPVC (SWR) floor trap plain with grating incl. jointing with solvent cement all as specified and directed |
| 82 | M & L PVC (SWR) gully trap 125 /100plain with gratingincl. jointing with solvent cement with greating all as specified and directed |
| 83 | M&L 10mm thick rendring with CM (1:4) over roof surface surface even and smooth mixed with WPC complere complete all specified and directed.Note :WPC shall be measued and paid seprately. |
| 84 | Supply only Integral water proofing compound complete. |
| 85 | M & L preparation of newly plasterd surface of roof incl cleaning the surfaces by using wire brush / pressure hose and applying high performance polythelene liquid membrane water prooing coating cold applied in two coats @ 1.5 kg/sqm two coats spray /brush applied with an elongnation of 300 % to 700 % and tensile strength of not less than 3 N/sqm as per ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D 2240. the item incl applying epoxy primer @ 0.15 Kg/Sqm and geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufactures instruction complete all as specified and directed by Engr-In-Charge.Note:- (I) The contractor shall submit a gaurantee of 10 years from date of compition of work for waterproofing treatment alongwith manufacturers gauruntee. the amount 40 (frouty only) per Sqm Min of Rs4000/- for waterproofing treatment shall be withheld from contractor final bill till the expiry of gauruntee period the contractor at his own option may furnish fix deposit receipt pledged in favour of GE (E ) Agra. against gauruntee money. (II) the wterproofing shall be carried out by authorised applicator of manufacturer. the name of applicator shall be got approved from GE before commencement of work. |
| 86 | Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)complete.all specified and directed. |
| 87 | S&F Urinal spredder of CP brass for fixing with 15 mm dia of pipe all as specified and directed. |
| 88 | S&F low density polyethylene (LDPE) pipes 32 mmof pressure rating 6kgf/sq. cm complete.all specified and directed. |
| 89 | S&F waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete.all specified and directed. |
| 90 | S&F Brass CP shower rose of 65mm size complete suitable for 15mm dia of pipe complete.all specified and directed.. |
| 91 | S&F 15 mm Stop valves concealed type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed. complete.all specified and directed. |
| 92 | M&L for Point wiring completeforOne light point controlled by one switch with PVC insualted and unsheathed FRLSH cable 1.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, MS sunken boxes duly painted with one coat of red oxide and one coat of black paint not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. |
| 93 | All as per item No 92here in before butforone 3 Pin 5 Amp switch Socket outlet point on Same board with other switches |
| 94 | All as per item No 92here in before butforone 3 Pin 5 Amp switch Socket outlet point on an independent board |
| 95 | All as per item No 92 here in before but with cable size FRLSH cable 4 Sq mm for one AC socket out let/ 15 Amps and multistrand insulated copper earth continuity conductor of size FRLSH cable 4 sqmm all as specified and directed |
| 96 | Supply and fixing switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed. |
| 97 | Supply and fixing Switch piano flush button single pole one way 15 amps 230 Voltswith polycarbonate body complete all as specified and directed. |
| 98 | Supply and fixing socket 5 amps 3 pin flush type, 240 volts. with polycarbonate body com-plete all as specified and directed. |
| 99 | Supply and fixing socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed. |
| 100 | Supply and fixing ceiling rose ,PVC polycarbonate, isolated body surface Bakelite 65mm dia three terminals all as specified and directed. |
| 101 | Supply and fixing 20W Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours incluuding connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 102 | Supplying and fixing 10 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 10W, luminaire lumens > 1000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surgeprotection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certificationand connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified. |
| 103 | Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection,fixed to pole or wall of building with and including suitableBracket made out of40 mm dia GIlightgrade pipe, 1.20 m long bent to shape by cutting & weldingas required & directed and fixed withtwo Nos of FI clamps 35x6 mm to be tightened with suitable size of bolts, nut and washers and including painted withtwo coat of aluminium paint over a coat of red oxide primer, and including connecting the fittingto electric sourcewith & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduitincluding all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. |
| 104 | Supply installation, testing and commissioning for Integrated LED type solar street light 30 W,Solar Panel of capacity 60W(MONO) 18V, Lithium ferro Phosphate (LiFeP04) battery 12.8V / 21 AH with long life, PIR Motion sensor for automatic dimming and brightness of light, Maintenance free system, Inbuilt BMS (battery management system) for battery safety, Longer shelf life of battery for storage,All Components are integrated inside one unit which make it theft retardant system,lumens > 110 lm/w, LED burning life is 50000 hrs, viewing angle should be 120 degree, colour temp 6000 K, Microcontroller based charge controller cum driver with adjustable,protection from short circuit, overload and reverse polarityincluding GI pipe heavy grade 50 mm dia not less than 6 mtr length inclMS clamp of size 35x5mm, excavation, PCC for erection of pipe, complete all as specified and directed. |
| 105 | Supply and fixing ceiling fan (copper winding), 1200mm sweep operate with remote, minimum BLDC (Brush Less Direct Current Energy saving ceiling fan of size 1200 mm sweep, 230 Volts, 50 Hz power consumption is less than 28 watt, 5 star rated noiseless motor operation, inverter stabilization technology, 370 RPM, 210 cum/min complete with standard accessories i.e (three blade, 02 Nos canopy, down rod of length 1.5 mtr to 2.0 mtr long, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts,bolts, washers, split locking pins etc), double ball bearing, copper wound, including electrically connecting from ceiling rose to fan connector with 0.75 sqmm stranded copper conductor three core flexiblecable with suitable size flexible PVC conduit complete all as specified and directed. |
| 106 | Supply and fixing in replacement of Exhaust Fan(copper winding) high quality mettalic body, heavy duty (4 blades) resistant to colour change 300 mm sweep, 900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side (outer surface of wall) and cutting with and including PVC insulated three core 0.75 Sqmmcopper cable and suitable size of flexible conduit pipefrom celling rose to exhaust fan motorand writing MES No. in black synthetic enamel paint/engraving tools etc complete complete all as specified and directed. |
| 107 | Supply and fixing in replacement ofelectric water heater, storage type made of ultra thick super cold rolled steel plates, feroglass dry powder coating technology inner tank (copper) and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW capaci-ty,230 V, 1 PhaseAC, 50 Hz, 50 litre, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating element offers superior heating performance and resistance to oxidation and carbonation at high temperatures rated complete with all accessories such as safety valve, thermostat,NRV, connection piece etc complete all as specified and directed. |
| 108 | Supply and fixing in repair MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with appropriate bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCBand with enclo-sure blank plates for unused way suitable for 4 way ISI marked, complete complete all as specified and directed. |
| 109 | Supply and fixing in repair MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with appropriate bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCBand with enclo-sure blank plates for unused way suitable for 12 way ISI marked, complete all as specified and directed. |
| 110 | Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA \"C\" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete complete all as specified and directed. |
| 111 | Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA \"C\" curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete complete all as specified and directed. |
| 112 | M&L for Submain wiring with two single core FRLSH 4 sqmm copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wallsurface / ceiling for sub main connection including FRLSH 4 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified .Note:- Two single core FRLSH 4 sqmm copper conductor, one run PVC conduit and one run ofFRLSH 4 sqmm earth wire shall be considered & measured as one unit. |
| 113 | Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 15mm GI light grade pipe for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. |
| 114 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 25 sq mm 3.5 core in trench/floor/on pole/wall/under road, complete all as specified and directed. |
| 115 | Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft soil complete all as specified and directed. |
| 116 | Returning,filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed. |
| 117 | Removing exeavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed. |
| 118 | Supply and laying HDPE pipe double wall medium class, ISI Marked corrugated as in cable protection pipe of outer dia 50 mm including all fittings complete all as specified and directed. |
| 119 | Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver, lamp including grouting of GI pipe medium grade not less than 32mm, complete all as specified and directed. |
| 120 | S & F Wall mounting fan, electric driven single phase 230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades with three leafed and 3 core copper cable of suitable size complete all as per specified. |
| 121 | M&L for drilling suitable dia horizontal bore holes for insertion/ laying of 40 mm to 90 mm bore HDPE pipe of any description below/under existing road surfaces / floors at a level not less than 0.60 metre etc with using mechanical/ or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed. Note :- Cost of equipmenttools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt. |
| 122 | Supply and laying pipe galvanized, “Medium class”, including fittings 40 mm dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed. |
| 123 | Supply and layingpipe galvanized, “Medium class”, including fittings 25mm dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed. |
| 124 | Supply and fixing Stop valves of size 25mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 125 | Supply and fixing Stop valves of size 40 mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
